Unable to connect VPN after OS update
hi, I recently updated my MacBook Pro to OS 10.9.2 and since then have been unable to stay logged into VPN for more than 5 mins. after about 5 mins, it freezes and I have to log out and restart the machine
Hello,
Unfortunately, the very thing you state that you do not wish to do is actually the recommended course of action, given what you have described.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Is there a fix for the wifi connectivity issue after ios6 update?
Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Unable to Log In After Software Update
Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warrenbaltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren -
When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?
When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?
-
TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)
I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)
Please see
https://discussions.apple.com/thread/4311280?tstart=0 -
Serious connectivity problems after recent updates
Hi
I have serious problem with my WIFI after recent updates from App Store.
I have good router, good internet connection and strong signal - I tested it on Windows on bootcamp and everything work perfectly.
iPhone also works with no problems.
On OS X it's very hard to load a web page, only sometimes it works good, as shown on ping, i have 41% packet loss:
apple ~ $ ping google.com
PING google.com (77.252.2.84): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
64 bytes from 77.252.2.84: icmp_seq=6 ttl=61 time=10.822 ms
64 bytes from 77.252.2.84: icmp_seq=7 ttl=61 time=11.484 ms
64 bytes from 77.252.2.84: icmp_seq=8 ttl=61 time=10.331 ms
64 bytes from 77.252.2.84: icmp_seq=9 ttl=61 time=7.437 ms
Request timeout for icmp_seq 10
Request timeout for icmp_seq 11
Request timeout for icmp_seq 12
Request timeout for icmp_seq 13
64 bytes from 77.252.2.84: icmp_seq=14 ttl=61 time=10.638 ms
64 bytes from 77.252.2.84: icmp_seq=15 ttl=61 time=6.316 ms
Request timeout for icmp_seq 16
64 bytes from 77.252.2.84: icmp_seq=17 ttl=61 time=10.694 ms
64 bytes from 77.252.2.84: icmp_seq=18 ttl=61 time=15.901 ms
64 bytes from 77.252.2.84: icmp_seq=19 ttl=61 time=46.882 ms
64 bytes from 77.252.2.84: icmp_seq=20 ttl=61 time=18.987 ms
64 bytes from 77.252.2.84: icmp_seq=21 ttl=61 time=18.911 ms
64 bytes from 77.252.2.84: icmp_seq=22 ttl=61 time=7.705 ms
64 bytes from 77.252.2.84: icmp_seq=23 ttl=61 time=8.714 ms
64 bytes from 77.252.2.84: icmp_seq=24 ttl=61 time=18.261 ms
64 bytes from 77.252.2.84: icmp_seq=25 ttl=61 time=8.952 ms
Request timeout for icmp_seq 26
64 bytes from 77.252.2.84: icmp_seq=27 ttl=61 time=16.877 ms
64 bytes from 77.252.2.84: icmp_seq=28 ttl=61 time=7.876 ms
^C
--- google.com ping statistics ---
29 packets transmitted, 17 packets received, 41.4% packet loss
round-trip min/avg/max/stddev = 6.316/13.929/46.882/9.219 ms
I'm using no proxy, no additional firewalls, antivirus, vpns (tunnelblick is installed but not used) etc - just simplest possible wifi connection with no changes to default configuration.I checked my System Log in Console and cannot find anything useful. One msg about the connection:
27.02.2013 07:17:41,096 UserEventAgent[11]: Captive: en1: Not probing 'NETIASPOT-653980' (protected network) -
Unable to connect to network iphone update server
I have an Iphone 4 that has been slow for a couple of days , today it started to open app different apps ( click on one and another opened) so i decided to restore and update it . Was running 4.3 . It never updated , has locked in recovery mode . when i try to restore i get a message that the iphone update server network unable to connect . I am running 10.5 itunes on a windows 7 . the iphone is visible in itunes , but when i check the diagnostic it said there is now iOS device connected . Is this a software issue or a hardware issue ? any help would be appreciated .
VarinderSandhu wrote:
Helios- Gunes EROL wrote:
Hi Nasir;
Please see below note which could be helpful for you:
ORA-12560: TNS:PROTOCOL ADAPTER ERROR [ID 989716.1]can you pls share me link or url as u suggested above ...
Regard
HeliosRegards,
Varinder SandhuIt's referring to a note in My Oracle Support (formerly known as MetaLink). You need to have a paid service contract with Oracle to access. -
Unable to connect even after changing settings as advised
I recently talked my mother into buying an Apple and used iChat A/V as the primary excuse. However, we are unable to connect on iChat (through AIM), like many others I have read about in this forum.
I am using a Motorola DSL modem, style MSTATEA and a Belkin Wireless G router.
I have changed my Quicktime Settings to 1.5, my AIM Proxy to 443, and my bandwith to 500 as suggested. Here is the log:
iChat Connection Log:
2009-05-05 19:55:57 -0400: AVChat started with ID 3925203817.
2009-05-05 19:55:57 -0400: 0x1a622120: State change from AVChatNoState to AVChatStateWaiting.
2009-05-05 19:55:57 -0400: premaniacal4: State change from AVChatNoState to AVChatStateInvited.
2009-05-05 19:56:00 -0400: 0x1a622120: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-05-05 19:56:00 -0400: premaniacal4: State change from AVChatStateInvited to AVChatStateConnecting.
2009-05-05 19:56:11 -0400: 0x1a622120: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: 0x1a622120: Error -8 (Did not receive a response from 0x1a622120.)
2009-05-05 19:56:11 -0400: premaniacal4: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: premaniacal4: Error -8 (Did not receive a response from 0x1a622120.)
Video Conference Error Report:
Video Conference Support Report:
0.310369 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
173.018088 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 2 returns 1
783.115517 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
783.254048 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
840.894462 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 4 returns 1
867.823022 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 5 returns 1
1935.147674 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 6 returns 1
1935.297776 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
Thanks in advance!Ok,
If it is this particular Motorola then it routes
http://portforward.com/english/routers/port_forwarding/Motorola/2210-02-1006/iCh at.htm
The link is a page on a site about setting up Port Forwarding.
The Main purpose for you though is the default access info so you can get to the Set Up pages.
Now as set up pages are never the same and can even vary from the same manufacturer it is worth checking all the tabs at the top and all the buttons on the right of this one and any links in the main section to see if it has UPnP
UPnP (Universal Pug and Play) is an Enable/Disable option of allowing the apps on a computer to control which ports are open. (They close after a period of NON use)
In the firewall section you may find the device's own firewall has 4 levels.
This should be at Low of Off for iChat.
If you can find UPnP enable that and Save Settings for any changes you make.
The same site's front index page list many more Belkins than Motorolas.
Which model specifically do you have ?
Having two devices that route causes it's own problems for iChat.
Like you say you have done for the Mac you should set the Modem to allow Static Routing (Called Manually on the Mac) to the Belkin.
This means finding out the Modem's IP (in the first link), the Subnet Mask it uses and the DNS Servers from the ISP.
This info needs to be copied in the corresponding boxes that the Belkin has for the Mac's Network Preferences and tabs after you change it from Getting an IP Automatically or similar phrase.
Summary,
Confirm Belkin Model.
Set up Belkin and Motorola/Netopia to be Static Routing
Open ports in both to allow iChat (using UPnP where possible)
4:47 PM Friday; May 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Mac App Store Connection Failed After Mavericks Update
Hi y'all,
immediately after I updated my Lion to Mavericks (10.9.1), I could not access no more Mac App Store: as I enter my (valid and active) Apple ID credentials, I receive a "Connection Failed" message (in red, in the same login dialog, under the user id field).
So I've tried to set to "Always Trust" all of my Class 3 Certificates in my Keychain, I removed all of the Mac Appstore plist files (appstore and storeagent), I've also tried to remove the network preferences plist file to reset my network interfaces preferences, I've also deleted the ocsp and crls cache files, and I've setup the ocsp and crls certificates preferences in my Keychain Access to off.
I obviously checked out my App Store account and it's correct and active - I'm also currently using it on my iPhone, iPad and iPod with no problem at all!
Anyway I wanted to try creating a new App Store account from the Mac AppStore itself: after I validated it, I tried to login into Mac AppStore... with no success!
So, NONE of the above mentioned attempts solved the problem, and I'm WORRIED and astonished wondering HOW APPLE COULD RELEASE A MAJOR O.S. UPDATE THAT SMASHES THE MAC APP STORE, WHICH IS ONE OF THE CORE APPS OF THIS O.S.!!! I use Mac OSes since many years and I never had O.S. problems (only some minor issue with third party applications out of Apple's scope and solved with some simple workaround).
CAN ANYBODY PLEASE HELP ME? :-)
THX IN ADVANCE,
DANILaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Secure Connection Problems after Yosemite update
Hi all
I'm using a MacBook Air 2012 and since upgrading to Yosemite, I have had a lot of issues using an Ethernet connection. I was using the same Ethernet connection for Mavericks and there were no problems whatsoever.
None of my apps which use the internet can connect. Examples include Skype not signing in, my Mail app not connecting and being unable to connect to the App Store.
When using Safari and Google Chrome I cannot access secure websites (https), however on Firefox I can access the majority of secure websites. Non-secure websites (http) are not a problem on any browser. Error messages on Safari say "Safari can't open the page (web address) because Safari can't establish a secure connection to the server." On Google Chrome the error message reads, "The connection to (web address) was interrupted."
I have tried and failed with numerous different suggestions including:
Ensuring correct time and date
DNS Flush
Changing Network Location in Preferences
Setting Network Location to Automatic in Preferences
Turning Firewalls/Anti-Virus Software off
Typing the following commands into the terminal:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Any help would be greatly appreciated!Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, restart as usual and post the results. -
Unable to connect to iPhone software update server
I'm trying to upgrade the firmware/software on my new iPhone and am unable to connect to the server. Is it experiencing high traffic at the moment? Just wondering if I should just try in a couple of days once the demand for the update slows down.
Cheers!
-jonI had the same problem on Fri evening and eventually gave up. Tried again on Sat morning and it was fine. So it probably is just high volume of traffic.
-
I am unable to save screenshot after black update
Hello Admin,
I am unable to take screenshot after updating black release.
Last night I have updated my Lumia 720 with Black release afterwards I'm unable to take the screenshot.
I am getting the error like "couldn't take screenshot".
Please help me out with this problem.
I am following the conventional way to take screenshot like "lock key + start key".
Thanking you in advance.
Phone Model: Nokia Lumia 720
Updated with Black Release
Solved!
Go to Solution.Yeah!! Its related to problem with folders on MMC. It happens when you share MMC or unplug phone un-safely from PC.
You can solve problem on memory card by formatting it. Do remember to take backup. Then insert MMC in phone. Let phone create folders, then copy back data.
You can try short cut, by deleting folder called pictures. But at times it doesn't work.
Cheers! -
Unable to download apps after iOS7 update
Hi,
After updating my iPad 3 to iOS 7, I can't download any apps from the app store. I've tried signing out and in from the app store but it did not work. Could this be a bug after the update?
ThanksApple's servers have been swamped since yesterday's release of iOS 7. Even the iTunes Store is/was showing signs of oddness with your apps needing updates not showing at all or when finally downloading the update, would stall and just sit there. All you can do is keep trying. Hopefully things will ease off today and into tomorrow.
-
i can't use the windows update program. i think i have to use internet exployer to do this. i tried but it doesn't work.. can firefox connect to the windows update site
== URL of affected sites ==
http://windows updateWindows Updates rely on [[ActiveX]] technology. It's a Microsoft technology that is used to add functionality to Windows programs.
'''Firefox does not support ActiveX technology''' for multiple reasons.
* ActiveX is only available on Windows operating systems, and as a result webpages that require it will not work on Linux or Mac.
* ActiveX integration with the Windows operating system has made it a target for [http://en.wikipedia.org/wiki/Malware malicious software].
Firefox uses [http://support.mozilla.com/en-US/kb/Using+plugins+with+Firefox plugins] to view and use multimedia content embedded in web pages, and [http://support.mozilla.com/en-US/kb/Using+extensions+with+Firefox extensions] to add new functions.
Internet Explorer comes with the Windows OS family by default, and to update the system, please just do '''Start''' > '''Windows update''', which opens IE regardless which browser is the default one. -
ITunes unable to connect, find music, or update iPhone.
My iTunes is permanently "Previous iTunes Library" and won't connect to the store, update, find purchased music, etc. The program rarely works. I can't update my iPhone because of this either.
Take it one issue at a time and search the forums for that issue and possible resolutions.
Maybe you are looking for
-
I don't know what I did. I started messing around with After Effects and accidentally opened up Adobe Media Encoder Queue. After that, that's when I noticed the problem. I can still import the video frames into layers but I can't open it up directly.
-
Defining XSLT from Abap to XML and XML to Abap (Internal Table)
Hi Experts, I need help with this XSLT for call transformation. I have defined an internal table and intend to use it as a source for Call Tranformation. But I have a Problem defining its XSLT and help would be greatly appreciated! I also wonder if t
-
Calling SQL Stored Procedure using Oracle Gateway
Hi Do you know how i can call a stored procedure with parameters from Oracle using oracle gateway?
-
How to generate unique PKIDs to add a new translation
We need to add a new translation to the table commonXLAExtensionCache. However in the documentation it states: -Verify that the pkid that is being inserted is unique per insert. It must start with 1058. How can we generate a unique pkid, is there a d
-
Group Policy Logon Script to create folder based on username, run as admin
Hello, I'm at a loss as to how to make this work. I wrote the following PowerShell script that will check to see if the currently logged in user has a folder on a share, and if not it will create the folder and set appropriate permissions. I want t