Unable to connect wirelessly on an Acer laptop using Vista

I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

#1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
#2 And check to be sure, if you use a WEP password of Hex or Ascii.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Unable to connect to internet with hp laptop using xfinity router/modem

Hi,I have a hp pavilion computer model dv9910us with windows vista hom premium OS. I have an xfinity wireless gateway device modem/router. I have had this at another location and it worked using verizon with a separate modem and router. I also tried it at a xfinity location with a separate modem and router and it worked. I got a separate wireless adapter and installed that and disabled the atheros ar5007 adapter in the device manager. will that atheros 2011 adapter work with this model computer using the windows vista home premium os. If so, could I leave the ar5007 disabled and install the 2011 to make sure it's ok before uninstalling the ar5007. I'm really a novice and just stumbling my way through this. Any help is appreciated.

Hi: You should enable the atheros wireless card, and install this driver. It will have no effect on the other one you are using. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_108905_1&swEnvOid=4059# Then shut down the PC, remove the usb adapter, reboot, and see if you can connect via the atheros card.

Unable to connect wirelessly to BTHome Hub

I have a ibook G4 running OSX 10.3.9 fitted out with Airport and have recently taken delivery of a BTHomehub, Both my Mac and laptop PC (also fitted out with wireless capability) are unable to connect wirelessly to this Hub despite being able to connect to the NET using an ethernet cable. It appears that there is no wireless signal being transmitted from the Hub, or at least a signal the both computers can recognise. We have contacted the support teams who have been unable to resolve the issue, and have replaced the Hub, guess what same problem.
Has anyone had similar experiences and if so how was it resolved? There doesn't appear to be any real info on the web about this.
ibook G4 Mac OS X (10.3.9)

Duane, The BtHomeHub is a UK device, both the Mac and the PC were purchased and are used in the UK. The hub is configured to detect settings automatically although i have tried all the different channels manually, no joy.
Anyone got any experience of this device or ways to resolve the problem?

Unable to connect wirelessly to new DSL modem - HP Deskjet 3050A - HELP!

I have a HP Deskjet 3050A J611g - I've had it a little more than a year (so out of warranty) and it has also been connected wirelessly to my HP laptop and other devices without any issues. Last month I had to get a new DSL modem from AT&T (the brand is PACE and the model is 4111N). Ever since getting the new modem my printer will not maintain a wireless connection.
I worked with AT&T tech support just after getting the modem and they were able to get me connected (they had remote access to my computer - uninstalled, reinstalled drivers, etc.) but within a few days I lost the wireless signal and cannot get it restored. I have worked with AT&T tech support for more than 10 hours - several different reps - and still not working. I have researched the issue myself, tried all of the troubleshooting steps provided by HP and others. I'm at a loss. My printer works if connected to my laptop with a usb cable but not wirelessly.
All my other devices are able to connect wirelessly to the modem, just not the printer. I'm at my wits end! What is left to try other than paying HP support for their assistance?

Access your router and make sure that MAC Filtering is turned off. Also, set the encryption type to WPA2-PSK (AES) only as HP printers don't work well with the TKIP encryption type, and set the Mode to 802.11g only as that is the Mode that HP printers work best with. Being on channel 11 shouldn't hurt anything unless there is a device that uses the same channel in the area then you might get some interference. Give these things a shot, and let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable to connect wirelessly to home network.

Unable to connect wirelessly to my home network from my MacBook Pro. My Powerbook G4 is connected wirelessly, no problem. However, the MacBook Pro keeps failing. I have tried rebooting both the modem/router and the MBP without success. I have also tried entering in the WEP code several times without success. Need help troubleshooting this. Thank you.

Not a problem. I appreciate whatever assistance you can spare.
I popped an Ethernet cable into the MBP and am downloading the 10.7.5 update. Says it's going to take about an hour. Going to see if that fixes the problem. Seems many Lion users have complained about wireless problems, so it appears I'm not alone.
As far as the other utilities you describe, I can't find anything that fits that description. I have something called AirPort Utility, but when I launch it, the window contains no columns, just a gray window with a globe and a prompt telling me that no AirPort base Stations have been found and that it's searching for one. I see nothing in my Applications or Utilities called Connection Doctor.
Here's hoping the 10.7.5 update remedies the problem. If not, I fear I might have to keep my MBP "tethered" via an Ethernet cable until I can find a fix for this.
Thanks again for your help.

Can my Acer laptop use Time Machine wi-fi?

Can my Acer laptop use Time Machine wi-fi? Is there some Apple proprietary software
that prevents me from accessing the security
enabled wireless network?

Chances are, your Time Capsule's wireless security settings are using WPA2 Personal encryption, which is a very popular industry standard used by both PC manufacturers and Apple.
You can confirm this as follows on your MacBook:
Open Macintosh HD > Applications > Utillities > AirPort Utility
Click Manual Setup
Look for the Wireless Security setting (about half way down the page)
What setting do you see?
If your Time Capsule is using WPA2 Personal security, then you would need to check with Acer Support to see if the laptop is capable of connecting to a WPA2 Personal wireless network.

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
It does not recognise my old connection.
Same case with wifi connection as well.
Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
But before it use to display my name now it is coming as Apple I-phone.
Anyone who can help on this, how to get it resolved.
- I have update my phone with backup (OLD version of IOS) but issue still presists.
This is the same issue somone mention on below.
http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
Kind Regards
@ru..

If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

Unable to Connect Wirelessly to Printer

Hi all.
Since I had my BT Infinity installed I am unable to connect to my printer Wirelessly like I had previous. I have an Epson SX600FW Inkjet All-in-One Printer. I have the BT Homehub 2.0. How do you configure this hub/router for the Wireless Printer? I cannot see any way of doing this?
Out of desperation, I have even tried to attach my old Router to the Homehub (even replace the BT Hub with it) but got nothing at all. Not even internet connection!
Can anyone help?
BT Infinity (Option 2/Unlimited) - BT Telephone (Unlimited 24/7 calls) - BT Vision (The Whole Lot! inc Sky Sports & ESPN)
Solved!
Go to Solution.

rdec1945 wrote:
Infinity installed yesterday. Works perfectly both with laptop and Wi Fi Blue Ray DVD but will not work with printer which is an Epson Stylus SX425W. I have set up printer ok to run on Wi Fi but it will not print and I keep getting error messages. Spoken to Epson who have been thro the set up, confirmed that all is ok and asked me to print a status check. This says that network is working correctly but "A router/access point channel conflict has been detected". According to Epson, the solution is for the BT Hub to be configured so that it allows any Epson product through it's firewalls, and for MAC address filtering to be turned off. This is out of my league - is there anyone out there who recognises this issue and can help?
Hi rdec1945
I dont use that printer but the epson PX710W.
Have you used the printers on screen menu.
Setup
OK
Network Settings
OK
Wireless setup wizard or even Advanced setup and then WPS Wireless LAN setup, where you use the WPS button on the side of the HH3.
Setting up mine did not involve opening any thing in the firewall or doing anything with MAC address filtering.
[edit] have a look at this post from geaves, again not the same printer but suggests setting it up with ethernet first, I think its post 6.
http://community.bt.com/t5/Other-BB-Queries/Cant-get-wireless-printer-working-with-Home-Hub-3/m-p/29...
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

FF4580 unable to connect Wireless - Windows 8

I have historically used the HP F4580 on XP and Windows 7 but not wirelessly. I have a new PC running Windows 8 64 Bit and am trying to re install the F4580 but would prefer it to run wirelessly.
I have downloaded the software and drivers from the HP website and the printer works fine using a USB connection.
I am trying to convert from USB to wireless using the HP installation and it states my SSID is not available.Even when I type in the SSID it states it is not avaialable. It then tells me the printer I have selected is not connected.
I have added the printer using the mac address to my router as a trusted source.
I have configured the wireless network direct from the device using the wizard and have an IP address for the printer.
The scan print states that wireless is up and running and working ok but I cannot print to it wirelessly. As soon as I remove the USB the printer is unavailable.
I have tried removing the printer and rebooting and reinstalling. I have disabled antivirus and firewalls but still am unable to print wirelessly.
Does anyone have any other ideas or have I missed something really simple.
Thanks
This question was solved.
View Solution.

Hi,
Many thanks to let us know problem solved.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to connect wireless printer

I am unable to connect my HP photosmart 5514 to my router-D link WBR 1310
Wireless Network Test Results show MAC filtering is on. It is not.
Very frustrating as I have 3 other devices connected and yet cannot connect my printer!
Help? Suggestions?

vbriere wrote:
1. yes the router is broadcasting it's network name
2. WPA is in use
3. router is on channel 11 as it has been
still this printer will not connect to my network...!!
any other suggestions?
Reset the printer to it factory defaults. Use WPA2-AES encryption in your router. Try another fixed channel, never 'auto'. Power off both printer and router. Power on router, wait 2 mns. Power on printer and connect to your SSID with your password. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Unable to connect wirelessly to homehub

I wonder if anyone can shed any light on this problem.
I am trying to connect a laptop running xp to a homehub. I can connect to the fon network ok and I can connect to other wireless networks ok. I can connect fine with a different laptop so I am certain the problem lies with the laptop, Is there a simple way to delete the hub connection and set it up from scratch?
Many thanks

cotswold
gotto control panel network connections - then right click on your wireless connection and select properties. Click the Wireless networks tab then in preferred networks select the home hub connection and remove it. Prob best to then reboot and start again
Banz

Unable to connect wirelessly to the Internet

I have a Linksys WAG200G connected via ethernet cable to an Apple Base Station.
I can connect wirelessly to the Base Station (as it appears in the Airport Menu Bar) but I'm unable to connect to the Internet.
I can, however, connect to the Internet via my iPhone so it must be something to with the MBP.
I've run disk permissions but still nothing. I've also attempted to connect wirelessly direct to the Linksys Router and that also works okay.

Why do you need the Apple Base Station? The WAG200G is a modem/router. Just connect to it and you should be able to connect to the internet. Connecting to 2 routers has them fighting for giving out IP addresses. Yes you can connect to both but you must disable one of them in their function to provide IP addresses.

WRT160N connects wirelessly on Windows 7 laptop, but not on Windows XP

Windows XP was working well on WRT54G, but obtained additional laptop which has Windows 7 which evidently was not compatible with WRT54G according to the trouble shooter on Windows 7. So, bought a WRT160N, which I believe is Version 3.
1. Ran the setup for the WRT160N on the XP computer and went fine. But when trying to connect wirelessly, the connection screen sits there trying to connect to the router with indication stating "Verifying Identity". The number of packets being received only amounts to about 3. The LAN cable works like a champ, though this is not the purpose of a wireless router.
2. I applied the WEP password to the Windows 7 Laptop and it works great.
3. What to I need to do to clean up the connection to the Windows XP computer?
Thanks!
Solved!
Go to Solution.

Click on the Start button >>> Control Panel >>> Network Connections- Here right click on the "Wireless Network Connection" icon and select Properties- Click on the 'Authentication' tab- Uncheck "Enable network access control using IEEE 802.1x" and click on Ok. Now,again go to Network Connection and try to connect the Wireless Network.

Unable to connect wireless print server while using wireless modem to ISP

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 modem for ISP access thru ATT. Either the ISP is connected and works, or the printer works but no internet access. HP (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

Unable to connect wirelessly on an Acer laptop using Vista

Similar Messages

Maybe you are looking for