Unable to connect yamaha dgx 300 to powerbook

I am unablet o mount my yamaha dgx 300 to garage band. OS 10.7.2

Are you using a MIDI interface? You'll need to do that and make sure you have the latest (i.e. working) drivers downloaded into your computer for it.

Similar Messages

  • Connecting Yamaha DGX-500

    I just bought an M-Audio interface and i have it attached with midi cables to my yamaha dgx-500. I have the interface on, the cables plugged in, my yamaha on and in the midi setting. The mac has no problem recognizing my interface and that there's a midi device plugged into it, but I still can't get the yamaha to work with garage band. Any help would be greatly appreciated

    Hey Jman & Hangtime,
    Did you guys ever resolve this. I have the same problem a Roland XP10. GB sees it and interacts via my midisport just fine, but I am limited in the voices to a standard midi set; I can't get all of the voices that I can get just by playing the Roland.
    Midi from Roland to midisport. Usb from midisport to MBpro. And visa versa.
    By the way, this post is being done from memory; I am not in front of it right now. I'm going to try some of the tips I found in these forums when I get a chance, and make sure its not just me being dingy.
    Thanks in advance.

  • Yamaha DGX-500 MIDI ... I have a bad feeling about this

    Hi,
    I am attempting to setup the Yamaha DGX-500 through my Macbook Pro to GarageBand 3. I have searched the forums and found that Yamaha is particularly problematic.
    The Yamaha is connected through a M-Audio Midisport Uno USB-MIDI connector. I went to M-Audio's site and downloaded and installed the latest drivers (3.2.2). The Uno appears fine through the Audio Midi Setup panel. I connect up the keyboard and start to record. The first few notes are okay, but I have lots of missing notes and other notes sustain forever.
    Other threads have suggested replacing the Uno with the Yamaha UX-16. I don't believe I will be able to return the Uno, so I would prefer to make it work if possible.
    Any other suggestions or troubleshooting ideas I could try?
    Thanks.
    - TA
    MBP   Mac OS X (10.4.10)  

    Hi davidgn
    I'll be happy to cast my eye over the account and double check this for you to set your mind at ease if you like?
    Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
    Just send to the email address in my profile and mark FAO Craig please.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Mail: unable to connect to my SMPT server? Also new Mail Account defaults to iMap and won't let me change to Pop?

    Dear All,
    I've been with the same UK internet and email provider for years and they've given me solid and reliable service. I've worked my way through the Apple Knowledgebase checklist and tests and proved that my isp/esp is working normally so the problem has to be with Mail.
    I fiddled about trying to create a Mail Account on my late 2011 but-new-to-me MacBook Pro a couple of days ago and, it might be completely unrelated and simply a coincidence, but since then none of my devices, Iphone 4S, Powerbook G4, iPhone 3G, the MBPro can send email using Mail.
    Whenever I try I get prompted for my password but when I enter it says it's wrong but it definitely isn't because I even changed it this morning through my isp/esp and it worked and I then changed it back again to my correct password and it works also to get into webmail that is, not via Mail.
    When I run Mail\Window\Connection Doctor and check the status it shows Mail is unable to connect to server but that it can connect to the internet. I get the following message: Trying to log in to SMPT account failed.  Try to verify that username and password are correct.
    Now, whenever I try to create a new email account on MacBook Pro Mail keeps defaulting to iMap and wont let me change it to Pop which is what I need.
    Does anyone have any ideas?

    Dear All,
    I'll finish off this thread in case it's of use to anyone else in the future.
    I couldn't get the email pop account to recognise my sign-in even though I've been using it continually and without problem for the last several years. It's always been BT and Yahoo so it's more likely to be the fiddle about I did on my temporary, pre migration user account that caused the hiccup.
    In th end I had to create another pop account which I was able to once I'd migrated my settings from my PB G4 to the MB Pro.  Unfortunately this didn't merge the numerous email folders that I'd created previously in Mail but I still have them on the PB and I believe they can be transferred manually which is what I will do.
    Thanks for everyone that took the time to help.
    K

  • IP Printing Issue -- Unable to connect and print

    I'm trying to print to a network printer that's connected by cable to my wireless router using IPP. The error message reads "Unable to connect to IPP host." The IP address I used for the printer was obtained from the printer test page. I also specified "generic postscipt printer" in the printer setup utility window. My printer and network info as follows:
    Printer -- HP LaserJet 4MV
    Router -- Linksys Wireless G
    Computer -- Powerbook G4, OSX.4
    I've reset the printers in the Printer Utility to use the latest version driver for the HP. I can browse using my PBk so my wireless connection is working (in fact the PBk is in the same room as the router). Any suggestions would be very much appreciated.

    I don't have a manual for the printer and I'm not aware of a print server being included in the hardware. The printer is simply a HP LaserJet 4MV which has a I/O card installed with local talk, 10Base-T, parellel, and BNC connections. I'm using the 10Base-T connection to my router.
    On the test page printout, it lists several things one of which is "Server Name" but it's blank with no entry. Under the heading "Mode" the entry reads "Queue Server." Don't know if any of this is relevant.

  • Unable to connect to OVD using the odsm

    Hi All,
    I was unable to connect to the OVD 11.1.1.3.0 installed using the ODSM, while i was able to connect to the OID happily.
    I tried to connect to the OVD using the adminssl port (8899), non-ssl port (6501), ssl port (7501). I have the user id as cn=orcladmin. i was redirected to some Certificate Trust Validation pop-window and then it was throwing the error to check the log.
    I cant figure out what might be the issue. please help me. i'm copying the content of the log file below.
    [2012-04-16T22:10:42.891+05:30] [wls_ods1] [WARNING] [] [org.apache.myfaces.trinidadinternal.context.RequestContextImpl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JQw1lFf4io95nf5EiZ1FZ42L00005z,0] [APP: odsm#11.1.1.2.0] Could not find partial trigger viewerId from UIHierarchyViewer[UIXFacesBeanImpl, id=hv1] with the supported partialTriggers syntax. The partial trigger was found with the deprecated syntax. Please use the supported syntax.
    [2012-04-16T22:10:42.906+05:30] [wls_ods1] [WARNING] [] [org.apache.myfaces.trinidadinternal.context.RequestContextImpl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JQw1lFf4io95nf5EiZ1FZ42L00005z,0] [APP: odsm#11.1.1.2.0] Could not find partial trigger cmdb1 from UIHierarchyViewer[UIXFacesBeanImpl, id=hv1] with the supported partialTriggers syntax. The partial trigger was found with the deprecated syntax. Please use the supported syntax.
    [2012-04-16T22:10:43.625+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JQw1lFf4io95nf5EiZ1FZ42L00005z,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #56[[
    javax.servlet.ServletException: com/octetstring/vde/admin/services/client/VDEAdminServiceSoapBindingStub
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:421)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:421)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NoClassDefFoundError: com/octetstring/vde/admin/services/client/VDEAdminServiceSoapBindingStub
         at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
         at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
         at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
         at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
         at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
         at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
         at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
         at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
         at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
         at oracle.ldap.odsm.ui.common.PopupItem._createConnection(PopupItem.java:1815)
         at oracle.ldap.odsm.ui.common.PopupItem.alwaysAction(PopupItem.java:1763)
         at sun.reflect.GeneratedMethodAccessor316.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         ... 9 more
    [2012-04-16T22:11:49.094+05:30] [wls_ods1] [NOTIFICATION] [DIP-10580] [oracle.dip] [tid: UpdateThread] [userId: <anonymous>] [ecid: 0000JQvv94D4io95nf5EiZ1FZ42L000036,0] [APP: DIP#11.1.1.2.0] [arg: (&(changenumber>=11222)(|(targetdn=*cn=Profiles,cn=Provisioning,cn=Directory Integration Platform,cn=Products,cn=OracleContext)(targetdn=*cn=event definitions,cn=directory integration platform,cn=products,cn=oraclecontext)(targetdn=*cn=object definitions,cn=directory integration platform,cn=products,cn=oraclecontext)))] changelog filter : (&(changenumber>=11222)(|(targetdn=*cn=Profiles,cn=Provisioning,cn=Directory Integration Platform,cn=Products,cn=OracleContext)(targetdn=*cn=event definitions,cn=directory integration platform,cn=products,cn=oraclecontext)(targetdn=*cn=object definitions,cn=directory integration platform,cn=products,cn=oraclecontext)))

    you need java connector

  • Unable to connect clients to WAP121

    I have an issue with a WAP121.
    It's in an extremely congested area, and most client devices are unable to connect.
    The log (see below extract) shows repeated entries for reason 3.
    The AP is config'd with a fixed channel (6), and I've tried turning off 'n' support. It's running firmware version 1.0.4.4.
    What is happening here, and how should I fix it? Currently its embarrassingly been replaced by a £15 TP-Link AP (don't ask..) which is functioning perfectly, so although it's a harsh environment it's clearly possible :)
    Thanks all.
    J
    Aug 5 2014 01:10:43
    info
    hostapd[4140]
    wlan0: IEEE 802.11 Assoc request from b8:c7:5d:d5:87:3c BSSID 3c:08:f6:24:26:dc SSID WirelessLink
    Aug 5 2014 01:10:43
    info
    hostapd[4140]
    wlan0: IEEE 802.11 STA b8:c7:5d:d5:87:3c deauthed from BSSID 3c:08:f6:24:26:dc reason 3: STA is leaving IBSS or ESS

    My name Eric Moyers. I am an Engineer in the Small Business Support Center.
    I am sorry to hear that you are experiencing this issue. Since I am not sure which settings you have tried, I am listing everything I do and check below. If it is something that you have tried please excuse me.
    Here are a couple of things to try to resolve this issue:
    1) If you have more than one device and the devices are in Cluster Mode or Single Point Setup, I would ask that you disable that as a test.
    2) Go to Wireless-Bandwidth Utilization tab and disable Bandwidth Utilization.
    3) Go to Wireless-Radio tab, under Legacy Rate Sets supported and basic disable rates 1 and 2. 
    4) Change fixed multicast from auto to 54.
    5) Disable the "Broadcast key refresh rate" duration from 300 seconds to 0 seconds.
    6) If you have not already completed a wireless scan of the network area, you can do that using the Wi-Fi Analytics tool found here: http://www.ampedwireless.com/wifianalytics/
    It is a free download and I like it a lot.
    If this does not improve your issue, please call our support center and open a case so that one of our engineers can work directly with you.
    Also just as information the diagnostic download you did (diagnostic after reboot) is a real-time snapshot. It just shows what is going on at that moment in time. 
    Eric Moyers
    .:|:.:|:. CISCO | Cisco Technical Support | Wireless and Surveillance Subject Matter Expert
    Please rate helpful Posts and Let others know when your Question has been answered.

  • IBooks unable to connect to iCloud/bookstore

    After installing Mavericks on a MacBookPro late 2008 everything goes fine but iBooks:
    After opening iBooks my fulll iTunes library has been moved (approx. 300 books). but i’m unable to connect to my Apple-account. Clicking the menu-item ( .../Store/..) nothing happens. As a result all my categories are lost (which I had on iTunes/iPad/iPhone) and I’m unable to open books I already purchased.
    Internet connection is establishes, iTunes-Store etc works fine.
    There is a process „bookstoreagent“ wasting 100% CPU-time and console says every second
    23.10.13 20:30:15,069 bookstoreagent[448]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9813)
    I need help !

    my problem has been solved by the following thread:
    rudlab
    Re: Cannot Connect to the iBooks Store 
    11.11.2013 15:50 (in response to rudlab)
    Solved for me!
    Here is how it goes:
    1. Make a change to any one of the 10 setting that can be manipulated under the "Get info" window for the "VeriSign Class 3 Public Primary Certification Authority - G5" certificate but leave the "When using this certificate: Always Trust"-setting unchanged.
    2. Close the "Get info" window (password required).
    3. Again open the "Get info" window for ""VeriSign Class 3 Public Primary Certification Authority - G5" certificate.
    4. Now change the setting of  "When using this certificate: ..." to "Use System Defaults" (the 10 other setting should all show "no value specified").
    5. Close the "Get info" window (password required).
    Bingo! - Now it should be possible to log into iBookstore right away!

  • Error Message: Unable to Connect to Background Process........ HELP!!

    When I try to compress a FCP file from FCP version 5.1.4 i get an error message in Compressor Version 2.3.1: *Unable to Connect to Background Process*. I usually work on my G5 but I am on location and have been editing on my Laptop; Powerbook G4 1.25 GHz, with 1.25 gigs of RAM, 80GB Internal. Externals LA CIE 1TB & LA CIE 120GB Firewire external, running OSX 10.5.
    Any suggestions???
    Model Name: PowerBook G4 15"
    Model Identifier: PowerBook5,2
    Processor Name: PowerPC G4 (1.1)
    Processor Speed: 1.25 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 1.25 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.7.1f1

    Moving this discussion to the Help with using Adobe Muse CC forum.

  • "Unable to Connect to Background Process." Revisited

    Hello,
    I am getting the dreaded "Unable to Connect to Background Process."
    YES I tried the apple suggestion. I also tried the hostconfig suggestion (that one was a mistake!). Archive instal on the system then a re instal of Compressor & Q Master and no luck.
    I did notice one thing in activity monitor "Compressord (Not Responding)" It is hung force quit it and re launch compressor again and it dose that.
    Same is true on my PowerBook G4 17 and my New MacBook Pro 17 (Witch I migrated from the PowerBook)
    I am use Compressor 2.1
    Not sure where to go from here.
    Thanks for any info you can give me!
    Shaun
    MacBook Pro 17 inch   Mac OS X (10.4.6)   2 GB Ram 100 GB 7200 RPM Drive

    Robert's suggestion above is the only thing that worked for me. I tried all of the other "fixes" on this and other threads, but nothing solved the problem until I did this:
    - Quit Compressor
    - Run Terminal and then enter...
    sudo /Library/StartupItems/Qmaster/Qmaster
    ...and enter your system password.
    - Re-Run Compressor and re-submit the batch and it
    should work. Sometimes you need to wait a minute or
    so for Qmaster to get "up and running" but it has
    always worked for me. And Qmaster keeps running
    until you reboot.
    Hopefully, this will help someone else with the same problem.
    G5   Mac OS X (10.4.6)  

  • Unable to connect to Master Repository - AE Tool

    Hi,
    We are implementing LSO and are on the latest version of 604. Initially we had an approach to save the courses to SAP KM. Everything worked fine until we decided to use a new Content Management Server (CMS). The BASIS team has setup the CMS properly and have successfully tested it.
    They have created a file system in an ECC System and have requested to use the URL http://<QA ECC>:1090/saplsq/lsqcs/contrep/Z_LSO_CONTENT
    I would also like to mention that the BASIS team have setup the Z_LSO_CONTENT repository in OAC0 with a Staorage Type as "HTTP COntent Server'.  Under CMSADMIN, I am able to see things OK for this repository.
    When I run this URL on the browser, I can see the files and folders.
    But I am unable to connect to this folder from the Repository explorer tool.
    I get the below error message.
    No access: 405
    -> Please verify the settings: WebDavSlide-Repository: [ServerURL=http://<SAP-ECC>:1090/saplsq/lsqcs/contrep/Z_LSO_CONTENT/]
    com.sap.hcm.ls.shared.repository.access.NoAccessException: No access: 405
    -> Please verify the settings: WebDavSlide-Repository: [ServerURL=http://<SAP-ECC>:1090/saplsq/lsqcs/contrep/Z_LSO_CONTENT/]
    at com.sap.hcm.ls.shared.repository.access.wdslide.WDRepository.checkAccessability(WDRepository.java:402)
    at com.sap.hcm.ls.shared.repository.access.Repository.checkOnlineState(Repository.java:120)
    at com.sap.hcm.ls.las.repository.explorer.ConfigContext.checkMasterAccess(ConfigContext.java:886)
    at com.sap.hcm.ls.las.repository.explorer.ConfigContext.goCMOnlineCore(ConfigContext.java:866)
    at com.sap.hcm.ls.las.repository.explorer.ConfigContext.goCMOnline(ConfigContext.java:767)
    at com.sap.hcm.ls.las.repository.explorer.ExplorerControl.updateConfigurationAndControl(ExplorerControl.java:1543)
    at com.sap.hcm.ls.las.repository.explorer.ConfigContext.applyBackendConfiguration(ConfigContext.java:718)
    at com.sap.hcm.ls.las.repository.explorer.ConfigContext.resetLASLoginContext(ConfigContext.java:531)
    at com.sap.hcm.ls.las.repository.adapter.auth.AuthRepAdapter.setLoginContext(AuthRepAdapter.java:300)
    at com.sap.hcm.ls.las.ide.RepositoryAccess.setLoginContext(RepositoryAccess.java:121)
    at com.sap.hcm.ls.las.ide.ConfigurationManager.changeConfiguration(ConfigurationManager.java:355)
    at com.sap.hcm.ls.las.ide.EditorFrame.start(EditorFrame.java:318)
    at com.sap.hcm.ls.las.ide.IDE.startLAS(IDE.java:171)
    at com.sap.hcm.ls.las.ide.REX.main(REX.java:25)
    Any suggestions.
    Regards
    Murali
    Edited by: Muralidaran Shanmugam on Mar 1, 2010 3:23 AM
    Edited by: Muralidaran Shanmugam on Mar 1, 2010 4:48 AM
    Edited by: Muralidaran Shanmugam on Mar 1, 2010 4:48 AM

    The BASIS team forgot to turn on the Web DAV feature on the Apache server on which the Content Server was installed.
    Issue solved.

  • Problems connecting Yamaha P-90 to GB08/Leopard via M-Audio Uno USB

    I am able to connect my Yamaha P-90 to my old G4 Powerbook running 10.3.9 using an M-Audio Uno USB MIDI interface. GB correctly detects that a new MIDI device has been added. I have just bought an 20" iMac with Leopard, but it cannot detect the MIDI device when I plug it in. The Yamaha and the interface clearly work, so I assume there must be an issue in Leopard. Do I need to install any specific drivers to make this work? I don't remember having to do this with the old machine, although admittedly it was a while ago.
    I've read numerous posts bemoaning the issues that seem to surround trying to connect Yamaha to Apple via USB. Any help would be appreciated. Many thanks, Guy

    I just found this on the M-Audio website:
    Mac OS X 10.5 (Leopard)
    Updated 10/26/07
    M-Audio has a history of quickly bringing the benefits of significant new advancements in computer technology to the pro audio community—from the advent of USB and FireWire to the release of Mac OS X. We are working closely with Apple to ensure that our products and technologies will support Mac OS X Leopard.
    Due to the nature of software and driver development, we are not able to provide exact dates for when specific drivers will become available—but please rest assured that supporting Leopard is a top priority for us. As soon as Leopard drivers or updates for any product become available, our Web site will be immediately updated to reflect this.
    If you choose to install Leopard on your system before your M-Audio product has been qualified for use with the new OS, please be aware that your M-Audio device may not function properly. Please continue to check M-Audio.com for updates.
    * suppose I should wait

  • ADF / OBIEE Integration : Unable to connect to the BI Presentation Server

    Hi,
    Using JDeveloper 11.1.1.6, I have created one ADF application to test its integration with OBIEE 11.1.1.6. The application contains jsf page which holds OBIEE dashboard. At OBIEE side, I have created Impersonate user. When I run this application on Integrated Weblogic Server, it shows OBIEE dashboard perfectly. But when I deploy the application on OBIEE weblogic server, it is deployed successfully but shows following error when we try to access application through URL.
    Unable to connect to the BI Presentation Server. Please ensure that it is running, configured properly, and that the connection details within this application are correct.Please check the log file for more details.
    The connection (http) is working fine when we check it inside application. Can you please help how to resolve this issue?

    Hi,
    I can see 2 errors and 1 trace message in EM for that deployed application.
    Error 1
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.soap.connection.BISoapConnectionFactory
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Cannot lookup the connection,Obiee using fallbacks
    Supplemental Detail javax.naming.NameNotFoundException; remaining name 'Obiee'
    at oracle.adf.share.jndi.ContextImpl.findObject(ContextImpl.java:647)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:144)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:149)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionFallback(BISoapConnectionFactory.java:522)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionImpl(BISoapConnectionFactory.java:296)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionAndAddIfNecessary(BISoapConnectionFactory.java:580)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory.getConnection(BISoapConnectionFactory.java:163)
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:318)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Error 2
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Supplemental Detail oracle.bi.presentation.soap.connection.BISoapException: Please check the log file for more details.
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:323)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Trace Message
    Message Level 16
    SRC_CLASS oracle.bi.presentation.runtime.binding.BIRegionBinding
    SRC_METHOD _updateOrCreateSessionStylesheet
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Unable to get the Session Attribute. oracle.bi.presentation.runtime.styles.biStylesheet
    I hope this may help to identify the root cause and solution.

  • Unable to connect wirelessly to home network.

    Unable to connect wirelessly to my home network from my MacBook Pro. My Powerbook G4 is connected wirelessly, no problem. However, the MacBook Pro keeps failing. I have tried rebooting both the modem/router and the MBP without success. I have also tried entering in the WEP code several times without success. Need help troubleshooting this. Thank you.

    Not a problem. I appreciate whatever assistance you can spare.
    I popped an Ethernet cable into the MBP and am downloading the 10.7.5 update. Says it's going to take about an hour. Going to see if that fixes the problem. Seems many Lion users have complained about wireless problems, so it appears I'm not alone.
    As far as the other utilities you describe, I can't find anything that fits that description. I have something called AirPort Utility, but when I launch it, the window contains no columns, just a gray window with a globe and a prompt telling me that no AirPort base Stations have been found and that it's searching for one. I see nothing in my Applications or Utilities called Connection Doctor.
    Here's hoping the 10.7.5 update remedies the problem. If not, I fear I might have to keep my MBP "tethered" via an Ethernet cable until I can find a fix for this.
    Thanks again for your help.

  • Unable to connect to internet with cable modem

    I have a Imac about 2yrs old. Was running beautifully until lately. My modem shows all solid lights but for some reason it is unable to connect. Did all the things like rebooting, takng out the power cord on my modem letting rest a minutes. Changed the setting to manual from DHCP. Changed it back the other way.
    Can someone help me,
    Biscuit's

    Now when you plug your iBook directly into the modem, the internet works. Correct? Which Airport do you have? Try resetting your Airport. Below are some more links that should be useful...
    Knowledge Base Document #106858 is the Airport Troubleshooting Guide
    Knowledge Base Document #107451 on Resetting the Airport Extreme Base Station
    Knowledge Base Document #106602, which explains How to Reset the Airport Base Station (Dual Ethernet)
    Knowledge Base Document #58613 - Resetting the Airport Base Station (Graphite)
    Airport Express FAQ
    Knowledge Base Document #108044 on Resetting Airport Express
    Knowledge Base Document #166602 troubleshoots I Don't See My Airport Network
    I didn't know what Airport you had, so I included all of them. Select your model and try reseting it. If worse comes to worse, just do a Factory Settings Reset. You will have to configure it like you just took it out of the box. I have found that this usually fixes most AirPort problems.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Maybe you are looking for

  • Is it possible to set  Local Currency - INR in SAP B1 8.81

    Hi, In SAP B1 Version  8.81 , i have taken Type -Chart of Accounts - as Global and  Localization - United Kingdom  And just tell me is it possible to set Local Currency - INR in SAP B1 8.81

  • Acrobat X Pro ouput preview issue

    I have recently upgraded Acrobat from version 9 to 10. I frequently use the separations preview in the Output Preview tool to check the black separations on PDF files I receive for printing. When I try to click the black separation on and off again,

  • Need help setting up DSL modem

    I just spent 45 min. with a techie from my server trying to get an ethernet DSL modem set up. He was a Windows man and not familiar with Mac OS. We got everything in the control panels set up but activation failed. When I got to the final stage where

  • Why can't i save my itunes producer file

    I created a book using iBooks Author (simple) Trying to uploaded through iTunes producer (not so much) I've uploaded the same book about 20 times making revision after revision. Now my darkest hour is that I can't upload it anymore because Producer d

  • Why is my bill so much?

    I recently called costumer service about how much my data usage went up and made some changes to my account. From what I understand the agent told me I would be saving at the end and the total was going to be a little over 420. How did I get charged