Unable to contact vmware host machine

Good Day
I am experiencing a problem where the MS Virtual Machine converter gets stuck on the Source page when you click next button.
( I am trying to convert a virtual VMware based server to hyper v.
It comes up with the message "validating the credentials" for a few seconds then a error comes up "Unable to contact VMware host machine"
I am running the app on the server 2012 R2 VMware host server. I can ping the VMware host. The Firewall is disabled. I have installed the requirements for the application. If I do it from another pc (win 8.1) I manage to connect to the VMware host..
I also installed the message analyzer tool and monitored the NIC. The interesting thing is that I can see the ping packets etc but as soon as I try to use the migration tool there is not a peep on the wire. The fact is that the tool is not even attempting to
contact the source host.
Can someone please help? I need to run this from the server since I need vhdx suport.
Thanks

What version of MVMC are you running, I think 3.1 is the most recent? Since you have all prereqs installed, then I would see if uninstalling and reinstalling MVMC helps.

Similar Messages

VMWare Multi-Hypervisor Manager - Unable to connect to host

I have installed a VMWare Multi-Hypervisor into a test environment running vCentre 5.5. However, when am trying to add Microsoft Hyper-V, it says "Unable to connect to Host".
Winrm are enabled on the Hyper-V host. Also, tried to manually add its IP on TrustedHosts in Winrm. Still no go. Can somebody please provide some directions.

Hi,
Hyper-V 2012 R2 is not supported by Multi Hypervisor Manager, hence your issue with adding the host.
You can refer to the Release Notes for further information.
HTH,

[metaset] bif-ds: unable to contact rpc.metamedd on host "bif-002"

root@bif-001 # metadb -s bif-ds -d /dev/did/d10s7
metadb: bif-001: /dev/did/d10s7: No such file or directory
root@bif-001 # metadb -s bif-ds
flags first blk block count
a uo r 16 8192 /dev/did/dsk/d6s7
a uo r 16 8192 /dev/did/dsk/d7s7
a u r 16 8192 /dev/did/dsk/d11s7
a u r 16 8192 /dev/did/dsk/d10s7
root@bif-001 # bash
root@bif-001 # metadb -s bif-ds -d /dev/did/dsk/d6s7
root@bif-001 # metadb -s bif-ds -a /dev/did/dsk/d6s7
metadb: bif-001: bif-ds: unable to contact rpc.metamedd on host "bif-002"
root@bif-001 # date
Fri Mar 21 16:12:35 CST 2008
root@bif-001 # metadb -s bif-ds -a /dev/did/dsk/d6s7
root@bif-001 # date
Fri Mar 21 16:15:40 CST 2008
root@bif-001 # metadb -s bif-ds
flags first blk block count
a u r 16 8192 /dev/did/dsk/d6s7
a uo r 16 8192 /dev/did/dsk/d7s7
a u r 16 8192 /dev/did/dsk/d11s7
a u r 16 8192 /dev/did/dsk/d10s7
root@bif-001 # uname -a
SunOS bif-001 5.10 Generic_127111-03 sun4u sparc SUNW,Sun-Fire-V490
root@bif-001 # scinstall -pvv
Sun Cluster 3.1u4 for Solaris 10 sparc
SUNWscr: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscu: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscsckr: 3.1.0,REV=2005.07.18.14.37
SUNWscscku: 3.1.0,REV=2005.07.18.14.37
SUNWscnmr: 3.1.0,REV=2005.07.18.14.37
SUNWscnmu: 3.1.0,REV=2005.07.18.14.37
SUNWscdev: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscgds: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscman: 3.1.0,REV=2005.07.18.14.37
SUNWscsal: 3.1.0,REV=2005.07.18.14.37
SUNWscsam: 3.1.0,REV=2005.07.18.14.37
SUNWscvm: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWmdmr: 3.1.0,REV=2005.07.18.14.37
SUNWmdmu: 3.1.0,REV=2005.07.18.14.37, 120485-04
SUNWscmasar: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscmasau: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscva: 3.1.0,REV=2005.07.18.14.37
SUNWscspm: 3.1.0,REV=2005.07.18.14.37
SUNWscspmu: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscspmr: 3.1.0,REV=2005.07.18.14.37
SUNWscssv: 3.1.0,REV=2005.07.18.14.37
root@bif-001 # more /etc/release
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
root@bif-001 # metaset
Set name = bif-ds, Set number = 1
Host Owner
bif-001 Yes
bif-002
Mediator Host(s) Aliases
bif-001
bif-002
Drive Dbase
d6 Yes
d7 Yes
d10 Yes
d11 Yes
root@bif-001 # metastat -cs bif-ds
bif-ds/d301 m 184GB bif-ds/d311 bif-ds/d321
bif-ds/d311 s 184GB d7s0
bif-ds/d321 s 184GB d11s0
bif-ds/d302 m 10.0GB bif-ds/d312 bif-ds/d322
bif-ds/d312 s 10.0GB d6s0
bif-ds/d322 s 10.0GB d10s0
root@bif-001 # svcs \*rpc\*
STATE STIME FMRI
disabled Mar_07 svc:/network/rpc/keyserv:default
disabled Mar_07 svc:/network/rpc/nisplus:default
disabled Mar_07 svc:/network/rpc/bootparams:default
disabled Mar_07 svc:/network/rpc/gss:default
disabled Mar_07 svc:/network/rpc/ocfserv:default
disabled Mar_07 svc:/network/rpc/smserver:default
disabled Mar_07 svc:/network/rpc/rex:default
disabled Mar_07 svc:/network/rpc/mdcomm:default
disabled Mar_07 svc:/network/rpc/rstat:default
disabled Mar_07 svc:/network/rpc/rusers:default
disabled Mar_07 svc:/network/rpc/spray:default
disabled Mar_07 svc:/network/rpc/wall:default
disabled Mar_07 svc:/network/rpc-100235_1/rpc_ticotsord:default
disabled Mar_07 svc:/network/rpc/cde-calendar-manager:default
disabled Mar_07 svc:/network/rpc/cde-ttdbserver:tcp
online Mar_07 svc:/network/rpc/bind:default
online Mar_07 svc:/network/rpc/meta:default
online Mar_07 svc:/network/rpc/metamed:default
online Mar_07 svc:/network/rpc/metamh:default
online Mar_07 svc:/network/rpc/scadmd:default
online Mar_07 svc:/network/rpc/scrcmd:default
online Mar_07 svc:/network/rpc/metacld:default
online Mar_07 svc:/system/cluster/rpc-fed:default
online Mar_07 svc:/system/cluster/rpc-pmf:default
Why do I put another metadb into metaset successfully several minutes later after I run "metadb -s diskset -a or -d".

root@bif-001 # metadb -s bif-ds -d /dev/did/d10s7
metadb: bif-001: /dev/did/d10s7: No such file or directory
root@bif-001 # metadb -s bif-ds
flags first blk block count
a uo r 16 8192 /dev/did/dsk/d6s7
a uo r 16 8192 /dev/did/dsk/d7s7
a u r 16 8192 /dev/did/dsk/d11s7
a u r 16 8192 /dev/did/dsk/d10s7
root@bif-001 # bash
root@bif-001 # metadb -s bif-ds -d /dev/did/dsk/d6s7
root@bif-001 # metadb -s bif-ds -a /dev/did/dsk/d6s7
metadb: bif-001: bif-ds: unable to contact rpc.metamedd on host "bif-002"
root@bif-001 # date
Fri Mar 21 16:12:35 CST 2008
root@bif-001 # metadb -s bif-ds -a /dev/did/dsk/d6s7
root@bif-001 # date
Fri Mar 21 16:15:40 CST 2008
root@bif-001 # metadb -s bif-ds
flags first blk block count
a u r 16 8192 /dev/did/dsk/d6s7
a uo r 16 8192 /dev/did/dsk/d7s7
a u r 16 8192 /dev/did/dsk/d11s7
a u r 16 8192 /dev/did/dsk/d10s7
root@bif-001 # uname -a
SunOS bif-001 5.10 Generic_127111-03 sun4u sparc SUNW,Sun-Fire-V490
root@bif-001 # scinstall -pvv
Sun Cluster 3.1u4 for Solaris 10 sparc
SUNWscr: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscu: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscsckr: 3.1.0,REV=2005.07.18.14.37
SUNWscscku: 3.1.0,REV=2005.07.18.14.37
SUNWscnmr: 3.1.0,REV=2005.07.18.14.37
SUNWscnmu: 3.1.0,REV=2005.07.18.14.37
SUNWscdev: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscgds: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWscman: 3.1.0,REV=2005.07.18.14.37
SUNWscsal: 3.1.0,REV=2005.07.18.14.37
SUNWscsam: 3.1.0,REV=2005.07.18.14.37
SUNWscvm: 3.1.0,REV=2005.07.18.14.37, 120500-14 120500-16
SUNWmdmr: 3.1.0,REV=2005.07.18.14.37
SUNWmdmu: 3.1.0,REV=2005.07.18.14.37, 120485-04
SUNWscmasar: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscmasau: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscva: 3.1.0,REV=2005.07.18.14.37
SUNWscspm: 3.1.0,REV=2005.07.18.14.37
SUNWscspmu: 3.1.0,REV=2005.07.18.14.37, 120489-05
SUNWscspmr: 3.1.0,REV=2005.07.18.14.37
SUNWscssv: 3.1.0,REV=2005.07.18.14.37
root@bif-001 # more /etc/release
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
root@bif-001 # metaset
Set name = bif-ds, Set number = 1
Host Owner
bif-001 Yes
bif-002
Mediator Host(s) Aliases
bif-001
bif-002
Drive Dbase
d6 Yes
d7 Yes
d10 Yes
d11 Yes
root@bif-001 # metastat -cs bif-ds
bif-ds/d301 m 184GB bif-ds/d311 bif-ds/d321
bif-ds/d311 s 184GB d7s0
bif-ds/d321 s 184GB d11s0
bif-ds/d302 m 10.0GB bif-ds/d312 bif-ds/d322
bif-ds/d312 s 10.0GB d6s0
bif-ds/d322 s 10.0GB d10s0
root@bif-001 # svcs \*rpc\*
STATE STIME FMRI
disabled Mar_07 svc:/network/rpc/keyserv:default
disabled Mar_07 svc:/network/rpc/nisplus:default
disabled Mar_07 svc:/network/rpc/bootparams:default
disabled Mar_07 svc:/network/rpc/gss:default
disabled Mar_07 svc:/network/rpc/ocfserv:default
disabled Mar_07 svc:/network/rpc/smserver:default
disabled Mar_07 svc:/network/rpc/rex:default
disabled Mar_07 svc:/network/rpc/mdcomm:default
disabled Mar_07 svc:/network/rpc/rstat:default
disabled Mar_07 svc:/network/rpc/rusers:default
disabled Mar_07 svc:/network/rpc/spray:default
disabled Mar_07 svc:/network/rpc/wall:default
disabled Mar_07 svc:/network/rpc-100235_1/rpc_ticotsord:default
disabled Mar_07 svc:/network/rpc/cde-calendar-manager:default
disabled Mar_07 svc:/network/rpc/cde-ttdbserver:tcp
online Mar_07 svc:/network/rpc/bind:default
online Mar_07 svc:/network/rpc/meta:default
online Mar_07 svc:/network/rpc/metamed:default
online Mar_07 svc:/network/rpc/metamh:default
online Mar_07 svc:/network/rpc/scadmd:default
online Mar_07 svc:/network/rpc/scrcmd:default
online Mar_07 svc:/network/rpc/metacld:default
online Mar_07 svc:/system/cluster/rpc-fed:default
online Mar_07 svc:/system/cluster/rpc-pmf:default
Why do I put another metadb into metaset successfully several minutes later after I run "metadb -s diskset -a or -d".

Unable to Contact xVM VirtualBox Host

Hello,
I have a problem during the installation of the Sun VDI demo:
i reached the stage where i add a new desktop provider; and i receive an error:
"Unable to Contact xVM VirtualBox Host
No certificate was found on host <ip address> at port 443"
i did everything step by step and it seems correct and all the services are up.
thanks in advance.

hi,
i installed vbox 2.0.8 and the apache is running, and also i can access the host on port 443.
now i've noticed that during system boot i receive a message:
"svc:application/virtualbox/webservice:default: Method or service exit timed out. killing contract 41."
now when i check this service after the system is up:
"svcs svc:application/virtualbox/webservice:default" it's online.
do you have any other ideas?
Edited by: Michael87 on Mar 29, 2009 12:31 AM

Unable to access SP App from host machine. Page not found

I have created a virtual machine and configured SharePoint environment for the trail period on my windows 7 machine. I am able to do the Remote desktop connection from my host machine and access my SharePoint sites from the host machine browsers.
But when I try to access the apps created for SharePoint, it shows the page cannot be found. I am able to access the same App for the same user in the SharePoint server but not its host machine.
I have added this App domain to the intranet zone of host machine and to the server.
Could you pls suggest me what I am missing?
Thanks Sandy (MCTS, MCP)

Hi Sandy,
You can check if this issue is related to your virtual machine application network settings.
Please try to ping your SharePoint server from Windows 7 client see if it could be successful.
Please try to access your SharePoint site via IP address from Windows 7 IE browser, see if it works, may add SharePoint server ip map in your hosts file on windows 7 machine.
also check if it is related to SharePoint AAM configuration.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f40c6451-8c49-46ea-a344-ebf9977024d9/sharepoint-top-site-page-keep-getting-the-webpage-cannot-be-found-on-the-remote-machine?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/16bc995d-de85-42f2-a082-98c357965191/sharepoint-on-virtual-machine?forum=sharepointgenerallegacy
Thanks
Daniel Yang
TechNet Community Support

Weblogic 8.1 managed server unable to contact Admin server

I have a strange issue here.
I have admin server on Linux Machine A
Managed server on Linux Machine B.
When i try to start managed server on Machine B, i get the following error.
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: [Configuration Management:150001]An error occurred while connecting to the admin server to bootstrap through URL: http://MachineA:7100/wl_management_internal2/Bootstrap, user: system
java.io.EOFException
at java.io.ObjectInputStream$BlockDataInputStream.readFully(ObjectInputStream.java:2571)
at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:1990)
The error suggests that managed server on machine B, is unable to contact Admin server on Machine A.
But i know for sure that Admin server is running on that port 7100 for sure.
It has been for the last 3 years.
To see if Machine B and Machine A have network issues, i did telnet.
From Machine B: i typed the following
telnet MachineA 7100
Connected to MachineA.
Escape character is '^]'
The above telnet command tells us that no network issues exist.
After a few tries, the managed server contacts to admin server and comes up.
This is not a one time thing.
I saw this behavior many times.
How should i resolve this?
Edited by: gvamsius on Feb 12, 2009 1:23 PM

Every thing is configured fine.
Nothing wrong with Configuration.
This domain has been running for the past 3 years.
Recently, i found something interesting in admin server logs, when i try to start the managed servers.
I realized there will be some amount of hand shake that happens during managed server startup, when it tries to communicate with admin server.
Here is the log snippet when managed server A contacts Admin server and starts up successfully.
####<Mar 10, 2009 12:11:42 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150023> <Bootstrap servlet invoked with action isrunning from managed server Managed Server A.>
####<Mar 10, 2009 12:11:42 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150030> <The bootstrap servlet has acknowledged that the admin server is running to the booting managed server Managed Server A.>
####<Mar 10, 2009 12:11:42 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150023> <Bootstrap servlet invoked with action bootstrap from managed server Managed Server A.>
####<Mar 10, 2009 12:11:46 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150031> <*The bootstrap servlet has finished sending the configuration to Managed Server A*.>
Here is the log snippet when managed server B contacts Admin server and does not start.
####<Mar 10, 2009 12:07:07 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150023> <Bootstrap servlet invoked with action isrunning from managed server Managed Server B.>
####<Mar 10, 2009 12:07:07 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150030> <The bootstrap servlet has acknowledged that the admin server is running to the booting managed server Managed Server B.>
####<Mar 10, 2009 12:07:08 PM EDT> <Info> <Configuration Management> <Admin Host> <admin-server> <ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-150023> <Bootstrap servlet invoked with action bootstrap from managed server Managed Server B.>
The difference as you can see here is that managed server starts up only when Admin Server does the following
<*The bootstrap servlet has finished sending the configuration to Managed Server A*.>
Does any one knows why Admin server would not send the above bootstrap configuation all the times for the managed servers?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

Contact Apple Host for a research purpose

Hello the Apple Host,
I am a postgraduate student at Old Dominion University and currently working on a research focusing on online forums/discussion boards. I plan to conduct a study in Apple Discussions. I need to contact Apple Host to see if Apple can accommodate my request.
Thanks

Just remember any research you perform here may be skewed by certain facts:
1. The vast majority of users come in here if they have complaints or issues with their machines, and not just to rave about Apple products, and/or to help those with issues.
2. Some users may be logged in under multiple names making an issue look more prevalent than it is reality.
3. Updates invariably appear to cause consternation every time they are released, but in the end it turns out to be user lack of knowledge or preparedness that triggers the majority of issues as my FAQ* explains:
http://www.macmaps.com/upgradefaq.html
So when researching this board, be careful not to try to get too many facts skewed out of proportion because of the general tendency for people to complain when they don't understand their computers.
- * Links to my pages may give me compensation.

Problem to connect to VMware virtual machine in VMM

I have a problem to connect to the VMware virtual machine console through the VMM Admin Console. I get the message "For a connection with this virtual VMware machine necessary ActiveX object is not installed. Would like you to install the VMware ActiveX element now?"
If I click "yes", IE opens. To the installation of this ActiveX element I've added the web access side of the VMware-Host to the trustworthy sites in IE. I've also disabled the strengthened security configuration for IE. But it did not help.
What can I still try?
Thx

The most common problem getting the activeX installed is that the VMware infrastructure web portal has not been setup completely. It is from that portal that the activeX is downloaded and installed. Ensure that the VMware infrastructure portal has been setup
and configured for SSL. The Url we attempt to get theactiveX from is https://HostName/ui/plugin/msie/vmware-mks.cab
Uhm, yea, that URL is invalid. Maybe it was for vCenter 3.x? or 4.0 only? Does not resolve on v4.1 :(
If you are having trouble getting the activeX installed there are a couple of workarounds. One workaround is to install the VMWare Infrastructure Client onto your machine where you are running the VMM Admin Console. The Infrastructure Client installation
installs VMWare's activeX along with its own client.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
Another workaround is to login to the VMware Infrastructure Web Access portal and one time connect to a VM. This will also download and install the activeX and let it work.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
So basically I need either the SCVMM guys to figure out to do this in the new version from vmware or I need some vmware experts to tell me where I can find this activex component...

Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0

Hello
I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
The process stops when the disk conversion start. Error log below.
Thanks for any advice.
Regards
Toon
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
This conversion will proceed off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
The uninstallation of tools is not supported in off-line machine conversion scenarios.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
NOT preparing source virtual machine, this conversion is being treated as off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
Downloading VMware virtual disks from source virtual machine
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
04/18/2014 14:53:04 +02:00 [9] EXCEPTION:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
04/18/2014 14:53:04 +02:00 [9] Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
04/18/2014 14:53:04 +02:00 [1] Background task is complete.
04/18/2014 14:53:04 +02:00 [1] Conversion error message is displayed.
04/18/2014 14:53:04 +02:00 [1] Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
04/18/2014 14:53:06 +02:00 [1] Pressing Finish on the 'Completion' page.
04/18/2014 14:53:06 +02:00 [1] UI wizard is closing.
04/18/2014 14:53:06 +02:00 [1] Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
04/18/2014 14:53:09 +02:00 [1] Cancel confirmation prompt was canceled by user.

Hi,
Have you found any solution?
Thanks
Alessandro

Solaris 3i install - did work, now broken - unable to contact OAD

I did have an install on Solaris (single machine) of Discoverer 3i working, but it has stopped working. in the locator.log I find:
Tue Feb 13 11:14:41 CST 2001 Number of server machine = 1
Tue Feb 13 11:14:41 CST 2001 Locator: Server machine 0 = usicesn2
Tue Feb 13 11:14:41 CST 2001 Locator: IP addresses changed. Flushing cache
Tue Feb 13 11:14:41 CST 2001 Locator: IP addresses changed. Initializing OAD list
Tue Feb 13 11:14:41 CST 2001 Locator: Creating new OAD connections
Tue Feb 13 11:14:41 CST 2001 Unable to contact OAD on usicesn2
Tue Feb 13 11:14:41 CST 2001 Locator: IOR = IOR:000000000000001349444c3a4443494c6f6361746f723a312e30000000000001000000000000006200010000
0000000d3137322e32302e31352e32310000e72e0000004600504d43000000000000001349444c3a4443494c6f6361746f723a312e30000000000022444953434445564f726
1636c65446973636f76657265724c6f6361746f72332e3300
Tue Feb 13 15:47:50 CST 2001 Session manager started at 13-Feb-01 3:47:50 PM 743ms
Tue Feb 13 15:47:50 CST 2001 Prefs object GetData took: <Hour:Min:Sec.Ms> 0:0:0.20
Tue Feb 13 15:47:50 CST 2001 Request for Session name = DATESTOracleDiscovererSession3.3
Tue Feb 13 15:47:50 CST 2001 Locator: Request for for Session Manager number = 1
Tue Feb 13 15:47:50 CST 2001 Locator: Creating new cache for DATESTOracleDiscovererSession3.3
Two obvious problems. 1) Can't contact OAD on usicesn2 (the machine that has the entire 3i suite), and the attempt to access DATEST. DATEST was the NT machine we previously were using before migrating to Solaris. How does it know about DATEST?
I've tried stopping, starting, deregistering, re-registering, putting in the hard ip address, and no joy.
null

How did you have discoverer 3i working on one machine (solaris). I was under the impression that in 3i Solaris can only be used as a HTTP server and for the discoverer server you need to use an NT machine.
I am using the above setup but when I start the start_locator it says it cannot bind to the preference session. I then started the locator on the NT machine and moved the locator.ior file on the solaris box. It seemed to work then. Also using everything on one NT box seems to work.
Can you please give me an idea as how use are using solaris for your locator, preference and session component.

VMWARE host does not support VT

My system is HP Pavillion DM3. I want to run Pi 7.1, when I start Virtual machine I got error 'VMWARE host does not support VT'.
Please suggest me.
PI7.0 server is running my in system, but for PI7.1 these error is showing.
Could you please help me out.
Edited by: rs_Rashmi on Jan 11, 2011 10:05 AM

Markus Waldorf wrote:
Apparently you need to go into the BIOS setting of your computer. Normally you would have to press a certain key right after your computer reboots or starts. Usually there is also a brief message about which key to press in order to enter your system's BIOS (not inside vmware). Is this what you tried?Yes I have tried that using F2 key to bring up the BIOS and when I bring up the system BIOS, I just can't same to fine where I need to enable VT. The first 3 options in SYSTEM can not be edited.
>
I found the following in Google that seems to match your case:
http://www.petri.co.il/virtual_run_a_64_bit_guest_operating_system_in_vmware.htm
"In my case, I have a Dell Optiplex GX620 with an Intel 64bit processor. The VMware 64-bit compatibility tool told me that my computer was capable of running a 64-bit Guest, however, when I went to run it, I was told this: I found that I had to go into my BIOS and enable my Intel VT VMM capabilities. After I did that and rebooted my system, I was able to run my 64-bit OS using my already installed VMware Server."I have the same system - I will appreciate if you enter your BIOS again and find a specific area where I can enable VT.
Thank you

Invoke windows sound recorder in host machine by flex application

Hi
I have a flex application which provides option to invoke
windows sound recorder in client machine. User provides path of
windows sound recorder exe file and using 'navigateToURL('path of
recorder given by user)' method i plan to invoke the recorder in
client machine.
While executing this code in flex builder it runs properly
and invokes recorder. Then i deployed the flex application in a
server and requested using internet explorer. But this time it does
not invoke recorder. The error messge it displayed is gi ven below
SecurityError: Error #2148: SWF file
http://localhost:8080/flex/bin/DEVM.swf
cannot access local resource C:\WINNT\system32\sndrec32.exe. Only
local-with-filesystem and trusted local SWF files may access local
resources.
at global/flash.net::navigateToURL()
I think it is a security issue of sand boxes. Anyway i tried
to make the directory where exe file is kept (ie. system32) as a
trusted location using 'Global security settings panel'. But that
also did not solve the problem. I think only swf files, not any
other files, in the trusted local directories can be accessed by
the remote flex application. Is it right ???
Anyway i dont wish to keep any swf file under
'local-with-filesystem' sandbox in client machine.
Can anybody please help me to resolve this issue please ....
-rakesh

Hi,
The problem is I am not able to connect to database (11i/R12) from host machine. I am successfully able to run the application from host machine after putting entry in "hosts" file.What is the error?
To connect to database I have installed Oracle 9i client on host machine and put the entry in TNSNAMES.ORA generated by 11i/R12, but even doing so I am not able to connect to database.Are you able to tnsping the entry? If not, what is the error?
Please make sure you also follow the steps in (Note 291897.1 - 11.5.10 New Features : Managed SQL*Net Access from Hosts).
Is there any way I can connect to database (Installed on VMWARE) from HOST Machine.Post the error you get when you connect to the database remotely as well as the output of tnsping command.
Regards,
Hussein

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

I phone purchased online did not boot and it is said to have been locked through i cloud and i an unable to contact the seller how can i activate the phone

Unfortunately, your best bet is to obtain original proof of purchase and escalate your issue for assistance in detaching the Apple ID from that device. If your unable to get the proof of purchase, expensive paperweight . Did you get it through amazon?? Because I just got one through amazon....
<Edited by Host>

Unable to contact server, try again later

I am trying to buy a movie on my Apple TV but it says unable to contact server. Help please

My 6month long term Problem solved with your Help! am not using any Ghostery ad blocking software, but yes certain block in my host file '''"C:\windows\System32
\Drivers\etc\Hosts" '''I edit it & remove it now everything is ok. Thank you! so much for your valuable efforts! You are real Gem!

Unable to contact vmware host machine

Similar Messages

Maybe you are looking for