Unable to Control Half-yearly & yearly Budget in Payment Budget

Hi Expert,
Our Client's requirement is to control the FM Budget on half-yearly as well as yearly in payment Budget category.
Here they want that system will enable to make PR & PO for entire year but at the time of MIGO or ML81N if half-year budget get exhausted it will stop.
Example: They will create PR for SAP Service AMC for full year as 100000*12 month = 12,00,000. But at the time of MIGO or SES system will stop to make any SES if budget will exceed for half-year(100000*6month = 6,00,000).
Which is might be impossible because once budget get consumed at PR level it will not asked for budget again @ MIGO or SES.
I can do the same if activate the commitment budget but they want only payment budget not commitment budget.
Kind Regards
Shyam

Hi Eli,
I agreed with you and it's 100% correct but for the same I raise the OSS and I got the below reply:
But I have one doubt as below which I got the reply from SAP against OSS 457351/2014.
SAP has provided below three option for this issue.
1. Use Budget releases
2. Use different budget type, or even different AVC Ledger
3. Use Budget period as FM Dimension.
I use option 1 & 3 issue is not resolved but if I use the option 2(use Commitment Budget), then issue will get resolved which is not correct because our requirement is to control the budget by Payment Budget only not from any other Budget category.
Please suggest.
Regards
Shyam Singh

Similar Messages

Budget control - Assigned funds are less than payment budget for fiscal year in document item

Dear Experts,
We are using Former budgeting, when ever we run the transaction FMBV getting the following message to a particular user.
Budgeting
Assigned funds are xxxx BHD less than payment budget for fiscal year
2014 in document item XXXX /XXXXX .
And also when purchasing creates the PO getting similar message to a particular user.
Purchase order 450000XXXX
Assigned funds are XXXX BHD less than the commitment budget for
fiscal year 2014 in document item 010 XXXX /XXXXX .
How to know where these users were maintained.
Thanks for the help

Hello Itai,
Sorry for my late reply. Have you been able to find a solution for this?
If not, please update, otherwise please make this thread as answered.
Sorry for the delay...
Kind regards, Mar.

Commitment and Payment budget

Hi,
I want to have control over my commitments and payments. Is it possible to maintain both commitment and payment budget separately?
Moderator: Yes, it depends on the Update Profile. Please, read help.sap.com material for PSM-FM

Example of payment budget
Use update profile 101 and you will have a payment budget. this means:
earmarked funds (reservations, precom, com) are updated in the FM ledger payment budget
real (invoice and payments) are also updated in FM ledger payment budget. Attention. if you are in release before 5.0 you have to run RFFMS200 program in order to see the invoices paid. In ECC 6.0 it is online if you are a new FM customer.
Via MM PR, PO, GR, invoices MIRO and payments are also updated in FM ledger payment budget
Example of parallel ledgers commitment budget and payment budget
You can not use only commitment budget ledger if you want to see your real invoices and payments
Some clients like EU and others use separate FM ledgers. Then you have to enter twice data in the two ledgers.
Then they use update profile for this like 500 or 350(please check).
Commitments (earmarked funds and PR, PO) update the ledger commitment budget and invoices and payments are updated in ledger commitment budget.
Hope this is a litle bit clear.
Before implementing FM it is important to ask what your client wants and ask if you don't know the best update profile to use to SAP AG
ciao
Salvator
PSM-FM Consultant
Suisse

Can i get month, quarterly, half yearly, yearly wise sales report basing on

hi,
sap gurus,
good evening to all,
how can i get month, quarterly, half yearly, yearly wise sales report basing on division and material.
is there any std transaction code for that.
customization is requried for that.
regards,
balaji.t
09990019711

Standard SAP SD Reports:=
Statistic Group:
Purpose u2013 To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Regards,
Rajesh banka

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

Unable to view the Calendar Year/Month in the Query

Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJ

hi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks

Payment budget not checked in MIGO against last years PO

We are using Former Budgeting. We have customised specific tolerance (OF23) to generate error message when budget exceeds 100% against payment budget. (not commitment budget).
Now we have a scenario: Purchase order was created in the last year. Good was received in the current year. There is no budget against the commitment item in the relevant fund center. I expect the system to throw error messsage and stop good receipt posting. However, system does not give any message and goods receipt is posted. I would like the system to stop processing of goods receipt.
Appreciate any help in this regard
Cheers
Raghuveer

Hello Ajay
Thanks for your reply. I could not get back in time since I was on holiday.
We do not carry specifically execute carry forward of PO commitments step (PMJ2). System automatically carry forward the commitment. Question is not about the commitment budget. We have configured the system to give error message only when the payment budget is exceeded not at the time commitment. Because the budgeting is done based on payments (actual receipt of goods).
For example:
Fund center budget : 2013 1000
2014 100
PO created in 2013 for 800.
Good receipt in 2013 for 600.
In 2014 good receipt done for 200 (remaning value of PO). I expect the system to give error message for payment budget since 200 is more than the budgeted amount of 100. However, no messages are issued and GR is posted.
Appreciate if you can throw some light on tis.
Thanks.
Cheers
Raghuveer

Somehow I can't hear people talking on my iphone 4 either when calling or being called. I've bought this one for half a year. I need your help~Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

Date half a year from now, how to create?

How can I create a Date () instance which resembles half a year, or 2 months or a year or a day etc. etc. from now?
Thanks!

So, I did something like...
Date now = new Date ();
Timestamp timeStamp = new Timestamp (now.getTime ());
GregorianCalendar calendar = new GregorianCalendar ();
// TODO - FOR NOW WE ADD 60 DAYS TO THE EXISTING TIMESTAMP FOR THE EXPIRY DATE.
calendar.add (Calendar.DATE, 60);
Date expiryDate = calendar.getTime ();
Timestamp expTimeStamp = new Timestamp (expiryDate.getTime ());

Hi i have half a year ago, adobe photoshop elements 11 serial gedwonloaden and then bought my laptop and had seized a week ago and I had to have my laptop but all programs off adobe photoshop elements 11 and I wanted to resume in download photoshop elemen

hi i have half a year ago, adobe photoshop elements 11 serial gedwonloaden and then bought my laptop and had seized a week ago and I had to have my laptop but all programs off adobe photoshop elements 11 and I wanted to resume in download photoshop elements 11 but does not exist more I had to photoshop elements 12 download I have done but accepter my serial code is not that my serial number is not existing database? ?

The download link for photo shop 11 is :
Download Photoshop Elements products | 11, 10
Download and Installation Help
Hope it helps you.
Regards
Rajshree

How to carry forward the payment budget to next fiscal year

How to carry forward the payment budget to next fiscal year. Please provide us the Tcode for indivisual and for mass activity also.
Thanks,
Vivek Gupta

Done

Unable to Move 0P_FPER; fiscal year variant is ambigous

I have a very simple report with 12 RKF. Restriction is set on Period/Fiscal Year variable entered by user for the first column. For the rest of the columns offset is set accordingly.
Once I execute the report following message pops up
Unable to Move 0P_FPER; fiscal year is ambiguous
If some one has faced the similar issue please provide some insight regarding the solution. Ther eis a note about a similar message and it suggests to aplly SP17 and we are on SP20 so that should not be an issue now unless it has resurfaced.
Your help will be highly appreciated.
thanks!
Edited by: Aslam Khan on Jun 29, 2009 7:53 PM

Hey I have the same problem. Can you tell me how did you solve it? Looks like its a Fiscal year variant issue. Please tell me asap. Appreciate your help.
Thanks.

Unable to control volume on headphones for Spotify when using Apple Iphone Dock

I have an Iphone 5 and its connected to the Apple Iphone Desk docking station.
I have plugged my headphones into the Line Out port on the back of the docking station
However I am unable to control the volume of Spotify and it plays music at full volume through my headset
When undocked it works fine.
How can I fix this?

I have an Iphone 5 and its connected to the Apple Iphone Desk docking station.
I have plugged my headphones into the Line Out port on the back of the docking station
However I am unable to control the volume of Spotify and it plays music at full volume through my headset
When undocked it works fine.
How can I fix this?

Unable to control brightness in target display mode

I use my 27" mid2010 iMac as a display for my MacPro. However after the Mac OS X recent update to 10.6.8, I noticed I am unable to control the screen brightness. Usually, I was able to do so using the iMac keyboard to adjust brightness etc. but now they do not respond in Target Display Mode. The brightness adjustment do respond if I am using the iMac but not anymore in Target Display Mode. This is a little frustrating as the screen is really bright and is hurting my eyes.

Same here. Late 2009 iMac 27". This must be a bug. (Apple: please fix this, thanks!)
As a temporary solution I installed one of the brightness control apps you can find in the App store.
I used Midnight from Ollix, searching for 'brightness' in the app store reveals some more.
<note: controlling brightness this way affects colors and is no REAL fix, just makes your eyes hurt less until the bug is fixed>

Unable to Control Half-yearly & yearly Budget in Payment Budget

Similar Messages

Maybe you are looking for