Unable to convert disk to dynamic

Hi
I am trying to convert a 1 TB new LUN to dynamic disk on a VM (Vmware); it is giving me an error “Logical
Disk Manager
the operation did not complete. Check the system event log for more information on the error.”
Tried below steps:-
Removed the disk, added it back (RDM).
Unmapped a LUN and presented a new LUN (RDM),
Added a new disk (.vmdk) and tried that to convert,
Uninstalled the drivers and reinstalled them
Replaced VDS.
Reinstalled SP 2
Please help me on this issue.
Chaitanya.

Well if you have converted the disk in another machine there is no more problems right?:)
What OS is the server running?
If you run the diskpart utility as administrator does anything work better?
list disk
select disk <from above, 0>
convert dynamic
Did that help? Otherwise did it work or did you get a good errormessage.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

Similar Messages

Cannot convert disk to dynamic because security is enabled...

I am setting up a new computer with two Crucial m500 960GB SSD drives. I have Windows 8.1 Pro installed on the first drive. I am trying to mirror it to the second drive (using Windows Disk Management), but I get the error below. I can't find
anything online regarding this error. Bitlocker is not enabled on the drive. I tried turning off UEFI Secure Boot, but that didn't help either. There is the System Reserved drive created during the Windows install, but I wouldn't expect that
to cause this problem. Any ideas?
Virtual Disk Manager
The disk could not be converted to dynamic because security is enabled on one or more partitions.
OK

Hi,
According to your description, I suggest we try safe mode to check the result.
Meanwhile,I would to know if you installed other security software on your PC.
Regards,
Kelvin hsu
TechNet Community Support

Inadvertently converted disk to dynamic: can't boot OSX or reinstall

Greetings Folks,
I am on a mid-2012 MacBook Pro 13 that received a few days ago so first ever post on a Mac forum - hope it's as friendly and useful as the one over at Lenovo.
Just came back to Mac. Long story, boring details, but in addressing an 18-month old tantrum and in a Homer moment I was being inattentive and converted my HD to dynamic under Windows 7 while trying to convert a partition to exFAT for sharing files.
Like some noob fool I did not make recovery disks at the get go and the fact that there were no disks shipped with the machine didn't register as it should have (my only complaint regarding the product - the rest is ALL my bad). And no, also like some noob fool I did not, having seen it for the first time, tuck anything into Time Machine either. So it's the short and curlies for me...ah yes, and under Internet Recovery when I tried to access the installation and recovery option in Safari, it told me there is no machine registered under my name, something I thought was addressed when I first accessed updates and etc. from the AppStore.
To get on with it, I can't boot into OSX and I can't erase the HD uneder OSX Disk Utility either - I am in Viet Nam and internet is slow so everytime I resort to CMD R to get Internet Recovery it takes hours to load. Verify says the OSX Base Operating System is ok. Error messages I get:
"Couldn't modify partition map" when trying to erase the OSX partition for a reinstall of ML;
"Couldn't write installion information to disk" when trying to reinstall ML and no disk visible to select
From years dealing with Windoze I know that there's only a clean wipe and reinstall to go back to NTFS from dynamic, so I suspect I will have to completely wipe and reformat the HD. I already tried wiping the original partition under W7 but still can't get Disk Utility to do anything with it. So my question (assuming a fool is correct) is this:
What is the best tool to wipe and reformat the HD to something my MBP will then recognize and I can (go through the days it will likely take to download and) reinstall ML?
Or is there an easier, softer way? My Spidey Sense says no...
H

Drive Preparation and Installation for Mountain Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Envy 5534 on MAC- print error message unable to convert post scrip file

New printer set up fine prints letter but when I want it to print a page with bar code on get error message :-
print error message unable to convert post scrip file
Can any one help please
This question was solved.
View Solution.

Hi @itsalex,
What type of bar code are you printing, and from what program? Just a thought, what if you print the barcode as an image, if you are not already? Try File>Print> Advanced> Print as Image> print.
If the issue persists, let's reset the printing system and repair the disk permissions; doing so may resolve the issue.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer drive. In the screenshot below, you will see Airprint is auto selected, you can change it to the HP driver though.
I look forward to hearing back from you.
Talk to you later alligator
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

Error while trying to export with Preview: 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace'

When I try to export a PDF with preview, the dialog doesn't show and this error appears in the system log.
11/2/13 2:01:01.684 PM Preview[828]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
          0   CoreFoundation                      0x00007fff8e24d41c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8a400e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff8e24d1f8 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff8be42c61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8a08165c -[NSSecureColor initWithColor:] + 724
          5   ViewBridge                          0x00007fff8a08136f +[NSSecureColor secureColorWithColor:] + 48
          6   ViewBridge                          0x00007fff8a0a4cfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
          7   ViewBridge                          0x00007fff8a0a5bf5 -[NSRemoteView viewDidMoveToWindow] + 197
          8   AppKit                              0x00007fff881461d0 -[NSView _setWindow:] + 2899
          9   AppKit                              0x00007fff88143804 -[NSView addSubview:] + 364
          10 AppKit                              0x00007fff88157953 -[NSFrameView addSubview:] + 45
          11 AppKit                              0x00007fff88165cb5 -[NSWindow setContentView:] + 511
          12 AppKit                              0x00007fff889cb233 -[NSVBSavePanel init] + 287
          13 AppKit                              0x00007fff8874d5b9 +[NSSavePanel newRemotePanel] + 309
          14 AppKit                              0x00007fff8874d675 +[NSSavePanel _crunchyRawUnbonedPanel] + 120
          15 AppKit                              0x00007fff885a54fc -[NSDocument _preparedSavePanelForOperation:] + 260
          16 AppKit                              0x00007fff885a5f6f __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_2 + 320
          17 AppKit                              0x00007fff885d5910 -[NSDocument _commitEditingThenContinue:] + 501
          18 AppKit                              0x00007fff885d5abd -[NSDocument _commitEditingWithDelegate:didSomethingSelector:contextInfo:thenContinue:] + 138
          19 AppKit                              0x00007fff885a5e20 __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke + 375
          20 AppKit                              0x00007fff885989b8 -[NSDocument _processActivity:blockingMainThread:] + 1373
          21 AppKit                              0x00007fff88599921 -[NSDocument performActivityWithSynchronousWaiting:usingBlock:cancellationHandler:] + 220
          22 AppKit                              0x00007fff885a5c9a -[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:] + 137
          23 Preview                             0x000000010392901b Preview + 917531
          24 AppKit                              0x00007fff8834d3d0 -[NSApplication sendAction:to:from:] + 327
          25 AppKit                              0x00007fff88368348 -[NSMenuItem _corePerformAction] + 394
          26 AppKit                              0x00007fff88368084 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
          27 AppKit                              0x00007fff883b74dd -[NSMenu _internalPerformActionForItemAtIndex:] + 35
          28 AppKit                              0x00007fff883b7359 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
          29 AppKit                              0x00007fff8835e176 NSSLMMenuEventHandler + 716
          30 HIToolbox                           0x00007fff8973c6d4 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 892
          31 HIToolbox                           0x00007fff8973bc87 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 385
          32 HIToolbox                           0x00007fff8974fd90 SendEventToEventTarget + 40
          33 HIToolbox                           0x00007fff89785a30 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 420
          34 HIToolbox                           0x00007fff897b8618 SendMenuCommandWithContextAndModifiers + 59
          35 HIToolbox                           0x00007fff897b85c4 SendMenuItemSelectedEvent + 178
          36 HIToolbox                           0x00007fff897b84a5 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
          37 HIToolbox                           0x00007fff897c0425 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 718
          38 HIToolbox                           0x00007fff897c0051 _HandleMenuSelection2 + 446
          39 AppKit                              0x00007fff882d079c _NSHandleCarbonMenuEvent + 284
          40 AppKit                              0x00007fff8812f56e _DPSNextEvent + 2170
          41 AppKit                              0x00007fff8812e8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          42 AppKit                              0x00007fff881229cc -[NSApplication run] + 553
          43 AppKit                              0x00007fff8810d803 NSApplicationMain + 940
          44 libdyld.dylib                       0x00007fff868025fd start + 1
          45 ???                                 0x0000000000000001 0x0 + 1
timestamp: 14:01:01.684 Saturday 02 November 2013
process/thread/queue: Preview (828) / 0x7fff741cc310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions

When I try to export a PDF with preview, the dialog doesn't show and this error appears in the system log.
11/2/13 2:01:01.684 PM Preview[828]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
          0   CoreFoundation                      0x00007fff8e24d41c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8a400e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff8e24d1f8 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff8be42c61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8a08165c -[NSSecureColor initWithColor:] + 724
          5   ViewBridge                          0x00007fff8a08136f +[NSSecureColor secureColorWithColor:] + 48
          6   ViewBridge                          0x00007fff8a0a4cfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
          7   ViewBridge                          0x00007fff8a0a5bf5 -[NSRemoteView viewDidMoveToWindow] + 197
          8   AppKit                              0x00007fff881461d0 -[NSView _setWindow:] + 2899
          9   AppKit                              0x00007fff88143804 -[NSView addSubview:] + 364
          10 AppKit                              0x00007fff88157953 -[NSFrameView addSubview:] + 45
          11 AppKit                              0x00007fff88165cb5 -[NSWindow setContentView:] + 511
          12 AppKit                              0x00007fff889cb233 -[NSVBSavePanel init] + 287
          13 AppKit                              0x00007fff8874d5b9 +[NSSavePanel newRemotePanel] + 309
          14 AppKit                              0x00007fff8874d675 +[NSSavePanel _crunchyRawUnbonedPanel] + 120
          15 AppKit                              0x00007fff885a54fc -[NSDocument _preparedSavePanelForOperation:] + 260
          16 AppKit                              0x00007fff885a5f6f __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_2 + 320
          17 AppKit                              0x00007fff885d5910 -[NSDocument _commitEditingThenContinue:] + 501
          18 AppKit                              0x00007fff885d5abd -[NSDocument _commitEditingWithDelegate:didSomethingSelector:contextInfo:thenContinue:] + 138
          19 AppKit                              0x00007fff885a5e20 __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke + 375
          20 AppKit                              0x00007fff885989b8 -[NSDocument _processActivity:blockingMainThread:] + 1373
          21 AppKit                              0x00007fff88599921 -[NSDocument performActivityWithSynchronousWaiting:usingBlock:cancellationHandler:] + 220
          22 AppKit                              0x00007fff885a5c9a -[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:] + 137
          23 Preview                             0x000000010392901b Preview + 917531
          24 AppKit                              0x00007fff8834d3d0 -[NSApplication sendAction:to:from:] + 327
          25 AppKit                              0x00007fff88368348 -[NSMenuItem _corePerformAction] + 394
          26 AppKit                              0x00007fff88368084 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
          27 AppKit                              0x00007fff883b74dd -[NSMenu _internalPerformActionForItemAtIndex:] + 35
          28 AppKit                              0x00007fff883b7359 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
          29 AppKit                              0x00007fff8835e176 NSSLMMenuEventHandler + 716
          30 HIToolbox                           0x00007fff8973c6d4 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 892
          31 HIToolbox                           0x00007fff8973bc87 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 385
          32 HIToolbox                           0x00007fff8974fd90 SendEventToEventTarget + 40
          33 HIToolbox                           0x00007fff89785a30 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 420
          34 HIToolbox                           0x00007fff897b8618 SendMenuCommandWithContextAndModifiers + 59
          35 HIToolbox                           0x00007fff897b85c4 SendMenuItemSelectedEvent + 178
          36 HIToolbox                           0x00007fff897b84a5 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
          37 HIToolbox                           0x00007fff897c0425 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 718
          38 HIToolbox                           0x00007fff897c0051 _HandleMenuSelection2 + 446
          39 AppKit                              0x00007fff882d079c _NSHandleCarbonMenuEvent + 284
          40 AppKit                              0x00007fff8812f56e _DPSNextEvent + 2170
          41 AppKit                              0x00007fff8812e8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          42 AppKit                              0x00007fff881229cc -[NSApplication run] + 553
          43 AppKit                              0x00007fff8810d803 NSApplicationMain + 940
          44 libdyld.dylib                       0x00007fff868025fd start + 1
          45 ???                                 0x0000000000000001 0x0 + 1
timestamp: 14:01:01.684 Saturday 02 November 2013
process/thread/queue: Preview (828) / 0x7fff741cc310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions

HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
Help me Obie One Canobie you are my last hope

I have confused myself with the facts! Started out keeping track of every step and every variable but have sort of lost it as we progress here. First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question. Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option. Then powered down the computerator.
Next started up computerator. Turned Time Machine ON and experienced multiple successful backups! Then I started up a few applications, Mail and Text Edit (but not Safari so far). Had a few more successes. After each backup, I used Disk Utility to verify the backup disk is still OK. This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
Put computer to sleep for the night. Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD! Did a restart and verified the backup disk... OK.
Did a few Sleep-bad, Restart -OK repetitions.
It seems consistent: Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
=============================
Now then, I don't understand everything I know here. Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier). Is there any truth in this?
I may abandon this Seagate thing for something more compatible. What's out there that we know works reliably for us?

Unable to convert a postscript file on c3180

hp photosmart c3180 printer
printing from windows 8 64-bit ms word on a mountain lion mac using parallels 7
unable to convert a postscript file
unable to use after installing windows 8 64-bit

If I understand what it is you want, open the PDF file in Preview and from the File Menu select Export as PDF. In the file selector there's a button labeled Show Details. Click it. Select encrypt, enter a password, and save using a different name. The new document will show a lock indicated it is passworded. Delete the original version.

Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5

Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SV

I just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected]

Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 6.

Hi All,
I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
FROM (SELECT CASE Isnumeric(
accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
WHEN 1 THEN Cast(
fact_highweedsandgrassdetails.vendorinvoiceamount AS
VARCHAR(
10))
END AS
Total_Dollar_Amount,
fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township AS
CaseTownship,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag AS
CaseReferredToLegalFlag,
fact_casedetails.macinitiatedflag AS
CaseMACInitiatedFlag,
fact_casedetails.conversionstatusdesc AS
CaseConversionStatusDesc,
fact_casedetails.assignedstaff AS
CaseAssignedStaff,
fact_casedetails.completedstaff AS
CaseCompletedStaff,
fact_casedetails.closedbystaff AS
CaseClosedByStaff,
fact_casedetails.initiator AS
CaseInitiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
DECIMAL(6, 2))
AS
DaysOpen,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursOpenToMow,
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE
(fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime)) AS
NUMERIC(9, 2))
* 24 AS
HoursAssignedToMow,
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END AS
NumberComplete,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate IS
NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate
<=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHoursOLD,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)) * 24 AS
AbatementDurationHours,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
Assigned_Department_Staff,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
'HWG', 0)
, '-', 0)) AS compliancejoin,
fact_highweedsandgrassdetails.maccomments AS Expr1,
dbo.dim_highweedscensustracts.b1_census_tract
FROM dbo.fact_highweedsandgrassdetails
INNER JOIN dbo.fact_casedetails
ON fact_highweedsandgrassdetails.casenumber =
fact_casedetails.casenumber
INNER JOIN dbo.dim_highweedscensustracts
ON fact_highweedsandgrassdetails.casenumber =
dbo.dim_highweedscensustracts.casenumber
GROUP BY fact_highweedsandgrassdetails.casenumber,
fact_highweedsandgrassdetails.row_index,
fact_highweedsandgrassdetails.mowingsector,
fact_highweedsandgrassdetails.caseclosedflag,
fact_highweedsandgrassdetails.casecloseddateid,
fact_highweedsandgrassdetails.maccomments,
fact_highweedsandgrassdetails.lastfeeinvoicedateid,
fact_highweedsandgrassdetails.casehasvendorinfo,
fact_highweedsandgrassdetails.mowingstatus,
fact_highweedsandgrassdetails.receiveddateid,
fact_highweedsandgrassdetails.assignedtovendordateid,
fact_highweedsandgrassdetails.assignedtovendor,
fact_highweedsandgrassdetails.reassigneddateid,
fact_highweedsandgrassdetails.reassignedtovendor,
fact_highweedsandgrassdetails.currentvendor,
fact_highweedsandgrassdetails.currentassigneddateid,
fact_highweedsandgrassdetails.mowingduedateid,
fact_highweedsandgrassdetails.vendormoweddateid,
fact_highweedsandgrassdetails.invoiced,
fact_highweedsandgrassdetails.invoicedstatus,
fact_highweedsandgrassdetails.invoicedstatusdateid,
fact_highweedsandgrassdetails.vendorinvoicenumber,
fact_highweedsandgrassdetails.vendorcomments,
fact_casedetails.captypename,
fact_casedetails.casenumbersubgroup,
fact_casedetails.casetype,
fact_casedetails.township,
fact_casedetails.casestatus,
fact_casedetails.caseopendateid,
fact_casedetails.referredtolegalflag,
fact_casedetails.macinitiatedflag,
fact_casedetails.conversionstatusdesc,
fact_casedetails.assignedstaff,
fact_casedetails.completedstaff,
fact_casedetails.closedbystaff,
fact_casedetails.initiator,
fact_casedetails.reasonforinvestigation,
fact_casedetails.primaryaddress,
fact_casedetails.parcelnumber,
fact_highweedsandgrassdetails.vendormoweddatetime,
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.receiveddatetime,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
Cast(Datediff([day],
fact_highweedsandgrassdetails.assignedtovendordate,
COALESCE (
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.recordimportdatetime))
AS
NUMERIC(9, 2)),
CASE
WHEN mowingstatus = 'Mowed'
OR mowingstatus = 'Closed' THEN 1
ELSE 0
END,
fact_highweedsandgrassdetails.recordimportdatetime,
fact_casedetails.macsiebelnumber,
fact_highweedsandgrassdetails.mowingduedate,
fact_highweedsandgrassdetails.vendormoweddate,
fact_highweedsandgrassdetails.lastfeeinvoicedate,
fact_highweedsandgrassdetails.investigationopendatetime,
fact_highweedsandgrassdetails.investigationopendate,
fact_highweedsandgrassdetails.investigationopendateid,
Cast(Datediff([day],
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
( vendormoweddatetime IS NOT NULL
AND vendormoweddatetime <=
fact_highweedsandgrassdetails.casecloseddate ) THEN
fact_highweedsandgrassdetails.vendormoweddatetime
ELSE
CASE
WHEN (
fact_highweedsandgrassdetails.casecloseddate
IS NOT NULL
AND
fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime )
THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE
fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(9, 2)),
Cast(Datediff(ss,
fact_highweedsandgrassdetails.investigationopendatetime,
CASE
WHEN
COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate) IS
NOT NULL THEN COALESCE (vendormoweddatetime,
fact_highweedsandgrassdetails.casecloseddate)
ELSE
CASE
WHEN
( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
AND fact_highweedsandgrassdetails.casecloseddate <=
fact_highweedsandgrassdetails.recordimportdatetime ) THEN
fact_highweedsandgrassdetails.casecloseddate
ELSE fact_highweedsandgrassdetails.recordimportdatetime
END
END) AS NUMERIC(18, 2)) * 60,
fact_casedetails.assigneddepartment,
COALESCE (fact_casedetails.assignedstaff, '[null]')
+ '/'
+ COALESCE (fact_casedetails.assigneddepartment, '[null]'),
fact_highweedsandgrassdetails.casecloseddate,
fact_highweedsandgrassdetails.receiveddatetime,
fact_highweedsandgrassdetails.assignedtovendordate,
fact_highweedsandgrassdetails.vendorinvoiceamount,
fact_highweedsandgrassdetails.invoicedstatusdate,
fact_highweedsandgrassdetails.complaint_source,
fact_highweedsandgrassdetails.inspection_result,
fact_highweedsandgrassdetails.reason_for_complaint,
fact_highweedsandgrassdetails.contractcompliancevendor,
fact_highweedsandgrassdetails.vendor_action,
fact_highweedsandgrassdetails.date_of_complaint_id,
fact_highweedsandgrassdetails.date_of_inspection_id,
CONVERT(INT, Replace(
Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
, '-', 0)),
fact_highweedsandgrassdetails.maccomments,
dbo.dim_highweedscensustracts.b1_census_tract) AS
[High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
ASC
SV

I just counted the columns from the top:
1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
might be staring on the wrong column.
Erland Sommarskog, SQL Server MVP, [email protected]

Unable to Convert Sender Service to an ALE Logical system

Hi,
I am doing a simple SOAP -> PI 7.11 -> IDOC scenario. All objects are created and activated. In testing I get an error
Unable to convert the sender service TemporaryDisconnection_Sender to an ALE logical system
Sender is a Business Service.
I search SDN and found this blog /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
I did the Compare with SLD for the Business System. But still the error comes.
In mapping I Disable EDI_DC40 segment.
Also find one suggestion which tells to change the Header Mapping in Receiver Agreement, what exactly should I put in Sender Communication Component of the Header mapping?
Thank you,
Pankaj.

Hi,
In this thread I could find a solution by Michal: Unable to convert the sender service to an ALE logical system
3. click on sender service (header mapping section) and select your business system that represents XI business system
Will try if it works for me also.
If there are any suggestions, then please do post.
Thank you,
Pankaj.

Unable to convert the file name in Target directory

Dear Experts,
Currently iam facing a problem with some files.my interface is a File to file .As per the interface the sender will pick the flatfiles from source directory which the file name was BNP_NE201.txt once my file reached to target directory the name of the file willrenamed as VENDOR_Payment.NE201 automatically for this they have done some OS level script in receiver communication channel of the first interface which we have added "un operating system command after message processing" in processing parameters tab.again one more sender comm channel wil pick the file from first target directory which is having naming convesion of "VENDOR_Payment.NE201 " and post it to target. all the two interfaces are file to file (NFS) . for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
from our side i check every thing .could you please suggest me the way to approch
Reagrs,
Kiran tanuku

>> for a parctuclar day files has been posted to 1 st target directory and the receiver communication channel is not yet convert the file names bcz of that the second communication channel can't able to pick the files from target directory. for some times that is working fine and some times it is unable to convert.
You need to wait until the file is converted. After when it is converted then the second interface sender communication channel will pick the files.
What do u mean by unable to convert?
Is it unable to do the content conversion? if so then check the data as you said that it sometimes it works fine.
> The best approach is to change the name of the file in the receiver communciation channel instead of using a script.
Thanks,

BPM - IDoc to SOAP problem (Unable to convert sender service)

Hi,
I have a BPM scenario where I'm sending an Idoc from r/3 to XI to SOAP. As part of my scenario I'm sending an acknowledgment (ALEAUD) back to R/3.
I'm getting Unable to convert sender service IP_BPEL_INBOUND_ORDER to an ALE logical system on the Ack back.
So I usually know what to do when I get this, I do the SLD settings on the r/3 service and I'm OK. But in this case, it's asking for those ALE settings on the Integration Process?
I tried adding a logical system on it but now I'm getting the error that this is already used by the r/3 service. So I'm not to sure what to do next???
Rgds,
Yves

Ok do one thing, in you mapping take one field at target side (may be u can create one or use which is not been used yet) just map the standard function called Sender to this field in target.
Now in Intergration Directory when you do the header mapping by using F4 do not map the business systems this time, just press the button "Etended Path" (m not sure abt the exact name of this button) not use the X-Path here and select that target field which you mapped with Sender function in mapping.
How To Handle Acknowledgments for IDoc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
I hope this will solve your problem.
Regards,
Sarvesh

Unable to convert the sender service to an ALE logical system

Hello,
file adapter > XI 3.0 > Idoc adapter > r/3 system
In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI > idoc scenario to this same r/3 system (using same sld business system)
I read other topics on this error but it seems they all talk about an IDOC outbound interface.
What should I check?
Thanks
Boaz

I do have the same problem as Boaz Paz
When I try :
file adapter > XI 3.0 > Idoc adapter > r/3 system
> This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
I get an error while XI tries to call its IDoc Adapter:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>AwayOrders</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
With the following trace logs :
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = AVTItalie</Trace>
<Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
2. declare "AVTItalia" as a business partner in SLD with the logical system name
Plz help!

File-idoc Unable to convert the sender service to an ALE logical syste

Hi experts
iam working on file-idoc scenario ,iam getting the below error in sxmb_moni and RWB
"Unable to convert the sender service to an ALE logical system"
i checked the partnetr profile, RFC(sm59) and IDX1 t codes.
the connection is ok. but still i could figureout the problem.
please suggest me
Thanks
vasavi

Hi,
Have u checked the logical system is added in the Sender Business service in the Integration Directory?
Open the Buiness Service/System --> EDIT-ADAPTER SPECIFIC IDENTIFIERS
then specify the logical system name.
Go throgh the following link
Troubleshooting File-to-IDOC Scenario in XI.
Regards
Sridhar Goli

Unable to convert disk to dynamic

Similar Messages

Maybe you are looking for