Unable to convert the warning message to error message no.06881

Dear SAP gurus,
I have tried to convert the message no . 06881 from warning message to error message through the spro setting material management ->purchasing->environment data-> define attribute message -> system messages->selecting the message as 00 06 881 "Purchase orders released until & only (for quality reasons)" E.
kindly help on this........
Thanks in advance....
Thanks and Regards,
R.DIWAKAR

Thanks for your response guru,
This request is actually for Quality information record QI01 - where the setting for release date doesn't have any control over the procurement (while performing ME21N) - only warning message poping up
I have tried using the said option still the message doesnot changes to Error message,
I have checked in SPRO ->Quality management->QM in logistics->QM in procurement->Define control keys....all the keys checked ...still no change
Guide me....
Thanks and Regards,
R.Diwakar

Similar Messages

PI Trace : Unable to convert the sender service in error log

Good Day to All !
There are many messages failing in PI Production system. I think Interface & Sender service doesn't exist in PI system. Any suggestions ? Much appreciated.
Regards,
Hari Suseelan

Issue:
Unable to convert the sender service to an ALE logical system
Verification:
If the incoming messages from SAP Back end system having different Sender Component Name defined.
Error Log :
Resolution:
Step 1:
Ensure which is the relevant SAP Backend system to feed the incoming messages (SAP ECC, SAP CRM, SAP SRM etc).
Have to assign the relevant logical system name of the underlying SAP backend system.
Step 2:
Ensure that all the relevant business system (for the above logical system) defined and configured on SLD.
Step 3:
We have to map the above logical system by enabling header mapping on Receiver Agreement , enable check box- > Sender Communication Component.
Future Prevention:
Ensure while any new interface is developed have this configuration enabled if the incoming messages from SAP system and custom defined Sender Component name is defined.

I get a "Unable to process the back up file" error message when trying to restore the bookmarks I lost when I follwed the prompts to Reset Firefox settings.

I followed the prompts over the weekend to reset my Firefox settings, reassured by the message that said it would save my bookmarks, and now they appear lost. I followed the steps of your help articles and got the error message above. Help!

You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

Unable to convert the sender service insertgoods to an ALE logical system

Hi ,
I am trying to send an IDOC to sap system through XI BPM . But I am getting error as "Unable to convert the sender service insertgoods to an ALE logical system"
To rectify this error, I selected the integration process in integration directory and in (services---adapter specific properties I gave the logical system name as "LS" . Now i do not get any error in XI but idoc failed in SAP with error as "Partner profile not available "
Please advice .
Thanks & Regards,
Suvarna

Hi Suvarna
I have done this type scenarios using A2A and BPM also. I got success.
Here what i mean to say , forget about your integration process for a while.
For example you are sending a vendor file from System1 to a SAP System (IDOC). Here that file send by sender should be converted into IDOC.
So during the configuration of SLD for Sender system ,we should give logical system (any name) for Business System.
That logical system should be created in SAP system in (SALE tcode).Then you can't get that "Unable to convert the sender service"error.
For integration process no need to assign any logical system , leave it blank.
If you have any doubt you please call me on my mobile or give me your mail id I will forward the document which i have done.
thanks
Prasad 9960226467

How to Convert the Warning Message to Error Message in Standard Transaction

Hi,
I face one problem in Standard Transaction Code CS02. In that by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

Mohan,
It appears that there is some configuration you can do for BOM Message types to change the message type. The IMG link for this function is:
Production->Basic Data->Bill of Material->General Data->Change Message Type
However you need to read the IMG documentation to see if this will work for you. There are only certain messages that can be changed with this configuration step.
Also, please do not double post questions in the forums.
Best Regards,
Chris H.

Error "Unable to convert the sender service to an ALE logical system"

Hi,
I send I message from XI to R3 and I get the error "Unable to convert the sender service to an ALE logical system" in transaction "sxmb_moni". I've configured the idoc-adapter, as following:
-I have created a business system "r3sys_bs" with a logical system "r3system". This business system is the idoc-adapter. This logical system is also created in transaction "bd54". In the ID I have assigned the business system the logical system (adapterspecific identification).
So, this error still appears.
Can anybody help me please?
Regards
Stefan

Hi,
our scenario is JMS --> XI --> IDoc
so, I have created a business system "jms_bs" without a logical system in sld, that I use for the jms-connection to another software. so, the business system is a "third party".
Then I have created a business system with assigned logical system for the IDoc-Receiver as I in my first posting mentioned.
Which of both business systems need a logical system?
Thanks
Regards
Stefan

Converting Warning Message to Error Message in Benefits Enrollment Screen

Hello SAP,
How to convert Warning Message to Error Message in Benefits Enrollment Annual Enrollment Screen.
Warning Message: No beneficiaries selected for plan XXXX.
As per my requriement, there is one warning message which is popping up when all the plans total donot count to 100 %. At that time we need to show a Error message instead of Warning Message. Now warning message is displayed.
Reason: Insurance plans require error message when beneficiaries donot total to 100%
My question is in which message class or in which Table these messages are maintained and how to modify it.
Thanks,
Sankar Narayana

which badi you are using?
You cant use all methods to raise a error message
for example
Error_table of the method CHECK_DEPENDENTS of user exit PBEN0032 should
olny be used to raise configuration errors. Please use
CONSISTENCY_ERRORS to display any error message[move the content of
error_table to consistency_errors and clear the error_table inside the
method CHECK_DEPENDENTS].

To change the warning message to error message in VA01.

I want to change the warning message into error message in the standard VA01 transaction..
The steps I follow :
order type -->
enter
sold to part -->
ship to party -->
Purch order no -->
Req deliv date -->
Material -->
Order quantity -->
SU -->
enter.
The warning error dispayed is
No add. vendor / customer data maint. for 16320340 - please maintain J_1IMOCUST...
Want to change the above into error so that it shud not go further.

Hi Arif,
Click on Save Icon.
System will give information: No add. Vendor / Customer data maint. For INJ95C01 -Please maintain J_1IMOCUST. Ignore it.
Result
System will calculate Price of the Material creates Schedule Lines and saves the document. System will give a message: Standard Order has been saved.
**REWARD IF THIS HELPS WITH POINTS**
Regards
AK

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

Unable to convert the sender service XID_900 an ALE logical system Error~

Dear Expert:
I received a IDOC Ack but there is an error ocour~
Unable to convert the sender service XID_900 an ALE logical system
XID_900 is our business system that config in SLD.
it's very weird ....sender server should be like point to our BPM isn't?
Regards
Jack Lee

hi,
>>>it's very weird ....sender server should be like point to our BPM isn't?
this means that your XID_900 business system in Integration directory
does not have adapdater specific identifiers filled in
it has nothing to do with a BPM
also check out my blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Michal Krawczyk

ERROR" unable to convert the service as an ALE logical system"

Hello All,
In SOAP to IDOC scenario I tested the webservice with the client tool. Its hitting the integration engine but its throwing up an error" unable to convert the service as an ALE logical system". How can I maintain a logical system for a service as its outside our landscape. Can any one let me know how to proceed with this.
Looking forward to expert comments.
Thanks and regards,
Neelima

Hi,
Check this blog by Michal.
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Sudheer.

Error: Unable to convert the sender service SC_PO_fileidoc to an ALE logica

Hi,
I'm currently creating an Idoc adapter receiver with BPM. However I've received an error at the second stage from BPM - IDOC. It gives the error "Unable to convert the sender service SC_PO_fileidoc to an ALE logical system". Appreciate if anybody can help me.
Cheers
Zubair

Hi,
This weblog will help you resolve this issue.
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
under the section "Intgeration Process as the receiver system"
Check whether you have assigned the Logical system (LS) name to the integration process in the adapter specific identifiers (Integration Directory). Also check whether an entry for the LS is available in the SLD for the sender Business system.
Regards,
Sridhar

TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

HT6001 After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS3694 Unable to back up my Iphone 4S, error message states that my backup is corrupt and needs to be deleted. How do I delete the backup file?

Unable to back up my Iphone 4S, error message states that my backup is corrupt and needs to be deleted. How do I delete the backup file?
Help needed.

Thanks I did that and it worked.
Another question if you dont mind. If i want to undelete the backup file, is there a way?

Unable to convert the warning message to error message no.06881

Similar Messages

Maybe you are looking for