Unable to copy plan data through KP97

Hi,
we are trying to copy plan data from budget to forecast c01 for current fiscal year.We could not copy the plan data. On our investigation we found that if we copy cost centres individually planning data for all but two cost centres are copied. Thus we cannot copy data for two cost centres and system issues no errors either in test run or in actual run.
What could be wrong ? any ideas?
Thank you
Umang

Check the validity of the cost centers. Also check the block indicators in cost center master data.
Regards
Rakesh Pawaskar

Similar Messages

KP97 Copy Plan Data - Cummulate in Target Version

Hi Experts,
We have a requirement to commulate (sum) cost center plan data while copying from one plan version to another. Such functionality was avaiable through [SAP Note 792372 - KP97ff.: Cumulating copying |https://service.sap.com/sap/support/notes/792372]in 4.6C version.
However, now we are on ECC6.0 EhP4 and this SAP Note cannot be implemented in system. Any idea how we can get such functionality in ECC6.
Regards,
Hanif

HI,
did you check if the functionality is available in SAP standard without implementing the note?
I just checked an ECC 600 system, the message that needs to be created based on note 792372 (message class KPT3 message number 034) is there so I guess the other functionality is there as well...
BR Christian

Unable to load sample planning data through EAS

Hi
I am using planning 9.3.1 version. I installed Planning ,EAS, previously I loaded the sample data a lot of times , right now I installed Provider services now I am getting error in loading the data through EAS when I am loading the data I am unable to select the error file but I can select the load file . Even when I am hitting the online help it is not opening too.Previously before installing APS I am able to load. Does any one face this issue.....
Thanks

Hi
I am using planning 9.3.1 version. I installed Planning ,EAS, previously I loaded the sample data a lot of times , right now I installed Provider services now I am getting error in loading the data through EAS when I am loading the data I am unable to select the error file but I can select the load file . Even when I am hitting the online help it is not opening too.Previously before installing APS I am able to load. Does any one face this issue.....
Thanks

Unable to Create Planning Application through Planning AppWizard

Hi All,
I have a problem in creating the planning app through app wizard(at port 8300)
Logged into the Planning App Wizard(could able to do this successfully),
Clicked on Create Application and its showing up the error message like
" The page can't be processed check log for details"
I captured the error logs through SysErrFile and SysOutFile.
Could some one please help me to fix this.
Below is the message from log:
org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HyperionPlanning from URL file:E:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
Creating rebind thread to RMI
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.<init>(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
     at com.hyperion.planning.HspServletContextListener.contextInitialized(Unknown Source)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4343)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
Please Help it.
Thanks
kr

Are you using a previously configured datasource to create the application?
Perhaps, try with a new data source..
Regards,
Sayantan

Need to load the data through excel for plan data through IP?

Hi all,
The user needs to load the data through the excel and click on the save button so that the data is saved in the cube through integrated planning.
The objects used are
customer, material, plant, calendarmonth sales qty, gross billing!!
Can anyone pls let me know how to do this?
Thanks

Hi,
You can use the following How to guide to load data from file into transactional cube.
If using IP :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c?quicklink=index&overridelayout=true
Can also Refer to Marc's Blog:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
If you are using bPS you can get the details in Wiki also for the same.
You can then create the hyperlink in Excel ,which user can use to upload data which can then be saved to cube using save button.

BPS Copy plan data from one cost center to another using vairables

Hi experts,
I am trying to copy the planning data from one cost center to another in BPS.
I have just done it using a copy function and in the parameter group entering the costs centers for source and destinations.
What I am trying now it is to let the user select what this destination cost center could be.
I don`t know if this can be done using a variable. What I am thinking is; when the user enters executes the parameter group a pop-up appear that let him select the cost center for the destination.
May be this is not possible. Can you suggest me other ways of doing this?
Thanks in advance

Hi,
u can achieve this by creating a variable with the replacement type as 'User Defined Values'. You also need to enable the check box 'Input Allowed by user'. And at the planning level, in the 'Selection' tab, you should map the charecteristic (Cost Center) with the created variable. Same thing should be done at the planning package level.
Then, when you execute the parameter group, a pop-up comes asking for the value of the costcenter.
Regards,
Srinivas Kamireddy.

Unable to open Planning application through Workspace

Hi All,
I have Installed and configured the Hyperion products in the following Order
->Foundation services
->Essbase server
->Essbase Administration service
->Planning
->Reporting and Analysis
->Workspace
We know that workspace is a single user interface.
After configuring, I tried to open the Planning Application through workspace but I could not able to find "*Classic Application Administration*" under Administer option of Navigate menu Kindly guide me.
Thanks and Regards
chiDam

You don't need to start downloading weblogic.
Usually the issue is that either the web server has not been configured (this is not weblogic) or the permissions are not correct in shared services e.g. the hss roles of application creator, dimension editor.
You can always try going to create a planning application directly first http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/

Unable to delete PSA data through process chain.

Hi Everyone,
I have got a problem in PSA deletion. We have got few PSA and change log deletion jobs which run at daily or fortnight basis. We planned to add few PSA tables to each daily and fortnight jobs depending on requirement.
We added in development and could see jobs deleting PSAs properly. Now on transporting to testing, we could see that PSA tables are not being deleted and there is no change in data. We have checked the PSA table names properly, in table RSTSODS and confirmed PSA is given properly only.
Anyone faced this problem or have idea about this issue, please let us know and suggest us.
Thanks and regards,
Shashidhar.

Hi Shashidhar
Just check for the PSA requests as below:
Go to PSA in RSA1/ RSA1OLD -
> Select the PSA -
> Settings -> Display selection for PSA tree -> give start date and end date or any other selecetions as per your requirement-> it will show you all the details.
Hope this helps.
Cheers
Chanda

Copying of Data through HFM Copy utility fails wit unspecified error

All,
We are receiving some strange error . Please help if you have any input to this.
The error message shows :
Error : Failed to copy all available data from table XYZ_DCE_1_2008 to table ABC_DCE_1_2008. This may be a driver or DBMS error. Please review driver and DB logs!
Error : Processing aborted for table XYZ_DCE_1_2008. Reason: Unspecified error
I need help to understand , what should be the root cause of this error ? What should be the fix for the same?
Thanks,
Laxmikant

Laxmikanth,
What version of HFM are you on? If you are on 11.1.1.3 and using a 64 bit HFMCopyUtlity, then there is a known bug/issue with that. It fails and you would get the DB errors. We also faced a similar issue and Oracle support recommended to use a 32 bit HFM CopyUtility from a 32 bit server.
It works fine. Hiope this helps!!
Thanks,
SSP

Unable to load clob data through sql loader

Hi Experts ,
My ctl file is :
LOAD DATA infile '$di_top/conversion/devtrack_notes.csv'
truncate into table xxdi_proj
fields terminated by ','
optionally enclosed by '"'
trailing nullcols (bugid,note *clob*)
{code}
The problem is note column is a clob and one of the
values has line breaks like this :
{code}
Hi Sir,
Would you please inform when the reports are scheduled for automatic process?
Maria will stop his process to avoid duplication.
Please inform asap
With Regards ,
Ronaldinho
{code}
When the data gets loaded ,
The first column gets the sentence 'Would you please inform.....' i.e . the data of second columns gets loaded into first column as nulls are recognized as end delimiter.
How to overcome this problem?
Thanks

Pl post your exact OS and database versions, along with your complete sqlldr command, the table description and a sample of your input csv file.
HTH
Srini

Unable to create planning data source

hi,
we having hyperion plannig 11.1.1.3 version . i am trying to create data source it display error i.e i gave sever name ,user id, password after i click validate it display error

Hi,
I am also facing the same issue. I have uninstalled ans installed the application around 20 time..I am also not able to figure out. Please let me know the location of log,
Thanks,
Praveen Joshi

Copy planning for cost center Runtime error

Dear Gurus,
I am running KP97 to copy planning for cost center.
but I got following runtime error:
===================================================================
Runtime Errors         DYN_CALL_METH_CLASS_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_CLASS
       Occurred on     07.01.2009 at 13:21:25
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGUMD " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_CLASS',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_REFRESH_RE_EA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Class "CL_REEX_COPL_MASTERDATA_CHECK" was chosen during dynamic method call,
but could not be found.
=====================================================================
can anybody give me a hint how to solve the problem?
B.R.
George
Hi all, I searched the SAP notes, and found there is one note NOTE_0000632335 related to copy planning, I installed the note by TCode snote. the KP97 can run now, but for the IDES controling area 1000, I tried to test run copy version 0, period 1 to 12 from Fiscal year 2003 to 2004.
there are many records with error.
shall I ignore the error , unselect the test run and continue?
does anyone have similar experience with IDES R/3 4.71? why cannot I carry out all steps in online document for IDES?
B.R.
George
Edited by: George Pan on Jan 7, 2009 11:39 PM

Hi I checked the error with copying plan data. it's all because of 'plan data already exists'.
so I just ignore the error and continue.
thanks!
George

Copying Plan Assessment Version from V0 To Z1

Hi All,
Need assistance in how to Copy & run plan assessment in a different version fom V0 to Z1
I have copied tried copying planning data (KP06) using transaction KP97, however it did not transfer the assessments we had established via KSU9 in version 0 for our building and IT.
Can any one help me in copying plan assessment version from one to another.
Thanks In advance
Arun

Hi,
This is standard SAP behaviour (read note 15966); you have to execute the assessment cycles in the target version separately.
Regards,
Eli

Copying plan allocation

hello
I would like to built some scenario in CO.
I have 2 versions of planning.
Version 0 is for plannig on CCtr and Internal Orders. On this version I make distribution and assessment of planed data from CCtr to Internal Orders.
On version 1 I want to have copied planned data from version 0. So I have done copying data on CCtr from version 0 to 1 and on orders from 0 to 1. That almost ok. The problem which I have is during copying data from version 0 to 1 especially on orders (KO14) allocated data are not copied. How can I change configuration of CO module to get allocated data on version 1?

Hello,
Please try clicking the Settings button in T.code KO14 and ticking the option 'Copy detailed planning for Cost elements'
Field help is as below...
Copy costings?
Specifies whether detailed planning (costing) is to be copied from the reference version into the new version.
You may only copy the detailed planning if the following requirements have been met:
1. Reference and target fiscal years must be identical.
2. You must copy all periods, that is, you may not restrict your selection to individual periods.
3. Exchange rate type and value date of the reference and target versions must be identical.
4. You must copy on a 1:1 copy basis. This means that you must copy according to the reference.
Thanks,
VR

Copy cost center planning through kp97

Hi Team,
My user is facing the following problem, when he tried to copy planed prices from the previous period through KP97 the data is not copying properly, the exact data in previous period id not copying properly i dont know the reason i thought it is sap standard bug, kindly advise month end is unable to do.

Hi Subodh,
Thanks for your reply, the selection criteria what i given is correct, the process what we are following is, initially we run the transaction KP97 for copy the plan prices after that run the transaction KSS4 for plan cost splitting followed by KSPI for plan price calculation. After this process i checked the activity prices in KSBT it is showing difference with the previous period, the same procedure i followed for the previous period system copied the prices properly, but this period only system showing error.
Please help me to solve this error, i am unable to proceed for month end closing.
Regards,
Ravi.

Unable to copy plan data through KP97

Similar Messages

Maybe you are looking for