Unable to create a contact
Hi Preston,
I am trying to create a contact using createItemRequest method.
I am unable to create a contact when i try to set the EmailAddressList's Primary Attribute for the contact. However if i comment the line for setting the Primary Attribute for email addresses, I am able to create the contact.
The following is the XML Trace.
<createItemRequest xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <item xsi:type="q1:Contact" xmlns:q1="http://schemas.novell.com/2005/01/GroupWise/types">
- + <q1:name>test user</q1:name>
- + <q1:container>4B94C4DE.DSRDOM.BNEPO.104.1737179.1. 87D.1@53</q1:container>
- + <q1:PABGuid>/Y\6` "f <E:*! 6~ !</q1:PABGuid>
- + <q1:fullName>
- + <q1:displayName>test user</q1:displayName>
- + <q1:firstName>test</q1:firstName>
- + <q1:lastName>user</q1:lastName>
</q1:fullName>
- + <q1:emailList primary="test1">
- + <q1:email>test1</q1:email>
- + <q1:email>test2</q1:email>
</q1:emailList>
<q1:officeInfo />
</item>
</createItemRequest>
I am getting two types of error
- + <createItemResponse
xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <status>
- + <gwt:code>53506</gwt:code>
- + <gwt:description>User ambiguous</gwt:description>
</status>
</createItemResponse>
- + <createItemResponse
xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
- + <status>
- + <gwt:code>53505</gwt:code>
- + <gwt:description>User not on post office</gwt:description>
</status>
</createItemResponse>
The code is looking for internet style addresses.
Do you get the same problem if you supply email
address with an internet domain, i.e. [email protected]?
(Where "test.com" is a valid internet domain.)
>>> On Monday, April 12, 2010 at 11:56 PM,
shwetajain<[email protected]> wrote:
> Hi Preston,
>
> I am trying to create a contact using createItemRequest method.
> I am unable to create a contact when i try to set the
> EmailAddressList's Primary Attribute for the contact. However if i
> comment the line for setting the Primary Attribute for email addresses,
> I am able to create the contact.
>
> The following is the XML Trace.
>
> <createItemRequest
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <item xsi:type="q1:Contact"
> xmlns:q1="http://schemas.novell.com/2005/01/GroupWise/types">
> ‑ + <q1:name>test user</q1:name>
> ‑ +
> <q1:container>4B94C4DE.DSRDOM.BNEPO.104.1737179.1. 87D.1@53</q1:container>
> ‑ + <q1:PABGuid>/Y\6` "f <E:*! 6~ !</q1:PABGuid>
> ‑ + <q1:fullName>
> ‑ + <q1:displayName>test user</q1:displayName>
> ‑ + <q1:firstName>test</q1:firstName>
> ‑ + <q1:lastName>user</q1:lastName>
> </q1:fullName>
> ‑ + <q1:emailList primary="test1">
> ‑ + <q1:email>test1</q1:email>
> ‑ + <q1:email>test2</q1:email>
> </q1:emailList>
> <q1:officeInfo />
> </item>
> </createItemRequest>
>
> I am getting two types of error
>
>
> ‑ + <createItemResponse
>
> xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <status>
> ‑ + <gwt:code>53506</gwt:code>
> ‑ + <gwt:description>User ambiguous</gwt:description>
> </status>
> </createItemResponse>
>
>
> ‑ + <createItemResponse
>
> xmlns:gwt="http://schemas.novell.com/2005/01/GroupWise/types"
> xmlns="http://schemas.novell.com/2005/01/GroupWise/methods">
> ‑ + <status>
> ‑ + <gwt:code>53505</gwt:code>
> ‑ + <gwt:description>User not on post
> office</gwt:description>
> </status>
> </createItemResponse>
Similar Messages
-
Unable to creat & Edit contact
I can not creat or edit contact in Thai language.
When I try to do creat or edit.
It will be the same like I push HOME botton.
My device it iPhone 6 PLUS iOS 8.1.2
wichitI had a similar problem. I was supposed to join a meeting using Skype, but missed it because of Skype problems. I was online and so was the other party, but we could not connect. I got messages about missed calls, but I never got the actual calls. I tried calling them, but that didn't work either. Other contacts were able to reach me, but for some reason this particular contact wasn't. I tried restarting but that did not help. I'm not sure if the other party restarted Skype, I could ask that next time.
-
Unable to create custom phone labels for new contacts since the upgrade
I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.
If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Unable to create or edit AD (mail) contacts in address book
Hi!
I recently imported quite a list of contacts from an old CRM application into Exchange. All entries are nicely created in domain.local\company\location\Contacts. All fields are visible in Outlook under All Address Lists\All Contacts.
As we have a small company, just a few users, I want to give most of them the rights to create and update entries in the All Contacts folder, just as they were used to in the old app.
I started by creating role groups following this article:
http://blogs.technet.com/b/rmilne/archive/2013/08/07/creating-rbac-role-to-delegate-contact-management.aspx
I created an Admin Role group named Contact Administration, which contains the required Members, and I assigned two role groups to this group: Contact_Management, which is based on the Mail Recipient Creation parent group, and Contact_Management_2,
which is based on the Mail Recipient parent group. The Write Scope is: domain.local\company\location\Contacts.
Because this didn't result in anyone being able to update the contacts, I also created a group in Active Directory and delegated control on the contacts OU to this group, even though I think this doesn't add to the desired result (as it indeed didn't).
What am I missing here? Any help will be greatly appreciated!Hi
As per the information and details provided by you, to create or edit a mail contact in address book, please follow these steps: -
Use the Shell to create a contact
This example creates mail contact for Debra Garcia in Exchange Server 2013
New-MailContact -Name "Debra Garcia" -ExternalEmailAddress [email protected] -OrganizationalUnit Users
This example creates a mail contact for Alan Shen in Exchange online.
New-MailContact -Name "Alan Shen" -ExternalEmailAddress [email protected]
3. This example mail-enables an existing contact named Karen Toh in Exchange Server 2013.
Enable-MailContact -Identity "Karen Toh" -ExternalEmailAddress [email protected]
To add a contact: -
You can use the EAC to change selected properties for multiple mail contacts. When you select two or more mail contacts from the contacts lit in the EAC, the properties that can be bulk edited are displayed in the Details pane. When you change one of these properties, the change applies to all selected recipients.
When you bulk edit mail contacts, you can change the following properties areas: -
· Contact Information: - Change shared properties such as street, postal code, and city name.
· Organization: - Change shared properties such as department name, company name, and the manager that the selected mail contact or mail users report to.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
Unable to create report. Query produced too many results
Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
<br>
<br>
Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace: at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Unable to create IDOCs after client copy
I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FORM SAPLEDI1 LEDI1F09 108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION SAPLEDI1 LEDI1U19 33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION SAPLEDIR LEDIRU01 273
IDOC_INBOUND_WRITE_TO_DB
10 FORM SAPLEDIN LEDINF01 457
ONE_IDOC_STORE
9 FUNCTION SAPLEDIN LEDINU05 234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM SAPLEDIN LEDINV05 19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM SAPMSSY1 SAPMSSY1 254
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 59
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 229
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCV02 28
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 13 Ty. FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store = 0x070000008036F5B8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 14 (0x0000000E)
label = 20 (0x00000014)
fill = 9 (0x00000009)
leng = 1068 (0x0000042C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000048
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000008036F610
pghook = 0x07000000802D86D0
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 23 (0x00000017)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML 00000002#èXD63 070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No. 12 Ty. FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store = 0x0700000080284B80
ext1 = 0x0700000080285308
shmId = 0 (0x00000000)
id = 9 (0x00000009)
label = 10 (0x0000000A)
fill = 9 (0x00000009)
leng = 1062 (0x00000426)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000039
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000080320D90
pghook = 0x07000000802E1508
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 17 (0x00000011)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080284B30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML 00000000##XD63 070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000 00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 11 Ty. FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI 6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store = 0x0000000000000000
ext1 = 0x07000000802853F0
shmId = 0 (0x00000000)
id = 10 (0x0000000A)
label = 11 (0x0000000B)
fill = 0 (0x00000000)
leng = 100 (0x00000064)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000190
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080285340
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1 S005 No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No. 10 Ty. FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store = 0x07000000802D8760
ext1 = 0x07000000802D4490
shmId = 0 (0x00000000)
id = 3 (0x00000003)
label = 3 (0x00000003)
fill = 1 (0x00000001)
leng = 524 (0x0000020C)
loop = 224 (0x000000E0)
xtyp = TYPE#000136
occu = 10 (0x0000000A)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802DB9D8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 10 (0x0000000A)
lineAlloc = 10 (0x0000000A)
store_id = 9 (0x00000009)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack = 0x07000000802D8710
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store = 0x07000000802D8808
ext1 = 0x07000000802D8960
shmId = 0 (0x00000000)
id = 4 (0x00000004)
label = 4 (0x00000004)
fill = 9 (0x00000009)
leng = 1063 (0x00000427)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000138
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802E1550
pghook = 0x07000000802D8860
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 12 (0x0000000C)
shmIsReadOnly = 0 (0xHi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful -
i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????mallar wrote:
i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????
why would you steal your music id password? ..nokia id / account is different from windows live id btw.
maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials. -
i have got X120e from my college with ubuntu 11.04 installed. But my half of softwares dont work on this Lunix OS so decided to install windows 7, downloaded officially as i have keys for activation.
I used USB drive to install, Windows 7 setup sucessfully started on boot up but its getting error
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I have not connected any other devices.
My Hard disk is NOT dynamic, its basic.
I have contacted lenovo service centre, but this are taking up calls.
I am fed up of this, please help me..
I have exams coming and i need this urgently.
Solved!
Go to Solution.Hello,
Do you just want to delete the Ubuntu partition? If so, you may be able to do by booting from the Microsoft Windows 7 installation disc, pressing Shift+F10 to get to a Command Prompt, and then using the DISKPART.EXE program to erase the hard disk drive.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Photoshop CC and Bridge CC - Creating a contact sheet.
I am really frustrated that the process has changed in making a contact sheet as a PDF. I'm trying to follow the instructions on Adobe Photoshop help with little success. Contact Sheet II is not a good option given you have to create multiple Photoshop files. Am I missing something? What happened to the "Output" option in Bridge? If you shoot 300 pictures you end up with 15 separate Photoshop files instead of 1 PDF file. How is this better for a contact sheet? My guess is there is a fix out there that I haven't found yet.
In part of the instructions online you are instructed to..."If the Output space is not listed, open Adobe Bridge Preferences (Ctrl + K on Windows or Command + K on Mac OS), select the Startup Scripts panel, and select Adobe Output Module." I went there but "Output Module" is not an option in the list.
I'm a high school Photography teacher who is learning the latest Photoshop software. Previously I worked in Photoshop CS4 and creating a contact sheet was very simple! My tech department is unable to help so any suggestions will be greatly appreciated. This new process is really cumbersome for the students. Thank you.I'm using version 6.0.1.6. i've attached what my window looks like
-
Posting this on behalf of abrahamkf from the jsp newsgroups.
I am using eclips 3.1.2 and BEU free jsp editor. I have a eclipse project created by appfuse with the WEB-INF folder under 'web' directory, but my jsp pages are under the directory 'web/pages'. The following error is being thrown on opening the jsp pages.
Unable to create editor ID com.m7.wide.eclipse.jstudio.DocEditor.jsp: An unexpected exception was thrown.
java.lang.NullPointerException
at com.m7.wide.doceditor.EditorFactory.createDocEditor(Unknown Source)
at com.m7.wide.eclipse.jstudio.DynamicMultiPageEditor.createPages(Unknown Source)
at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:241)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:609)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:384)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:283)
at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:126)
at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:269)
at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:391)
at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1102)
at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1051)
at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1256)
at org.eclipse.ui.internal.PartStack.add(PartStack.java:442)
at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:109)
at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:60)
at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:212)
at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:202)
at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:758)
at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:665)
at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:628)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2360)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2295)
at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2287)
at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2273)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2268)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2249)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:371)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:334)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:251)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:131)
at org.eclipse.jdt.internal.ui.actions.OpenActionUtil.open(OpenActionUtil.java:49)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:169)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:153)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:222)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:198)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:296)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:869)
at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148)
at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739)
at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968)
at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067)
at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243)
at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238)
at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1021)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2867)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2572)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.eclipse_main(Main.java:948)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:29)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Please contact [email protected] with following information.
- The product you downloaded (or installer zip file name)
- email-id & installation key used (in case of Studio/Struts/JSF product)
- The OS you are working on
br
Srinagesh Susarla wrote:
Posting this on behalf of abrahamkf from the jsp newsgroups.
I am using eclips 3.1.2 and BEU free jsp editor. I have a eclipse project created by appfuse with the WEB-INF folder under 'web' directory, but my jsp pages are under the directory 'web/pages'. The following error is being thrown on opening the jsp pages.
Unable to create editor ID com.m7.wide.eclipse.jstudio.DocEditor.jsp: An unexpected exception was thrown.
java.lang.NullPointerException
at com.m7.wide.doceditor.EditorFactory.createDocEditor(Unknown Source)
at com.m7.wide.eclipse.jstudio.DynamicMultiPageEditor.createPages(Unknown Source)
at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:241)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:609)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:384)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:283)
at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:126)
at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:269)
at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:391)
at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1102)
at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1051)
at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1256)
at org.eclipse.ui.internal.PartStack.add(PartStack.java:442)
at org.eclipse.ui.internal.EditorStack.add(EditorStack.java:109)
at org.eclipse.ui.internal.EditorSashContainer.addEditor(EditorSashContainer.java:60)
at org.eclipse.ui.internal.EditorAreaHelper.addToLayout(EditorAreaHelper.java:212)
at org.eclipse.ui.internal.EditorAreaHelper.addEditor(EditorAreaHelper.java:202)
at org.eclipse.ui.internal.EditorManager.createEditorTab(EditorManager.java:758)
at org.eclipse.ui.internal.EditorManager.openEditorFromDescriptor(EditorManager.java:665)
at org.eclipse.ui.internal.EditorManager.openEditor(EditorManager.java:628)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2360)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2295)
at org.eclipse.ui.internal.WorkbenchPage.access$9(WorkbenchPage.java:2287)
at org.eclipse.ui.internal.WorkbenchPage$9.run(WorkbenchPage.java:2273)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2268)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2249)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:371)
at org.eclipse.ui.ide.IDE.openEditor(IDE.java:334)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:251)
at org.eclipse.jdt.internal.ui.javaeditor.EditorUtility.openInEditor(EditorUtility.java:131)
at org.eclipse.jdt.internal.ui.actions.OpenActionUtil.open(OpenActionUtil.java:49)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:169)
at org.eclipse.jdt.ui.actions.OpenAction.run(OpenAction.java:153)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.dispatchRun(SelectionDispatchAction.java:222)
at org.eclipse.jdt.ui.actions.SelectionDispatchAction.run(SelectionDispatchAction.java:198)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerActionGroup.handleOpen(PackageExplorerActionGroup.java:296)
at org.eclipse.jdt.internal.ui.packageview.PackageExplorerPart$4.open(PackageExplorerPart.java:869)
at org.eclipse.jface.viewers.StructuredViewer$2.run(StructuredViewer.java:741)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:44)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:148)
at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:739)
at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:968)
at org.eclipse.jface.viewers.StructuredViewer$6.handleOpen(StructuredViewer.java:1067)
at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:243)
at org.eclipse.jface.util.OpenStrategy.access$2(OpenStrategy.java:238)
at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:277)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1021)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2867)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2572)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.eclipse_main(Main.java:948)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:29)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110) -
Unable to create a Service Connection Point
Hi -
I set up a new SharePoint 2013 environment. Everything installed successfully. When I launch Central Admin, it doesn't accept my logon ID/password. I found the following in the application event logs. I assume our AD guys will
need to set up a new SCP as pointed out here: http://technet.microsoft.com/en-us/library/ff730261.aspx
I just don't recall having to ever do this before in any of the dozen or environments that I had set up.
Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=cprt,DC=adt,DC=net doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.ProvisionAdminVs()
By the way, when I tried to run PowerShell to create the Admin Content DB, I got this error, even though the install account has sysadmin privileges on all databases:
New-SPConfigurationDatabase : Cannot connect to database master at SQL server
at SP2013Server -AdministrationContentDatabaseName. The database might not
exist, or the current user does not have permission to connect to it.
At line:1 char:1
+ New-SPConfigurationDatabase -DatabaseName SharePoint_Config -DatabaseServer
VMRS ...
I just went ahead and then ran the Product Config Wizard and it set up everything fine. Some folks were able to resolve by running config wizard twice?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6ae61eb1-9405-4421-9bc7-a0037f4ec29b/sp1-upgrade-failure-service-connection-point?forum=sharepointadminpreviousHi,
According to your post, my understanding is that you were unable to create a Service Connection Point.
To resolve the “Unable to create a Service Connection Point in the current Active Directory domain”
error, you need to make sure you have permission to write to this container.
“You have to grant permission to write to this container to any user accounts or domain accounts that could run the SharePoint Products
Configuration Wizard. If the account does not have permission to write to this container, the following warning will appear in the log file for the SharePoint Products Configuration Wizard: Unable to create a Service Connection Point in the current Active
Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.”
http://technet.microsoft.com/en-us/library/ff730261.aspx
The “New-SPConfigurationDatabase : Cannot connect to database master at SQL server”
error is a common issue and has various resolutions.
More often than not it is a firewall issue on the SQL server so check that OR it's that SQL server has not been enabled for remote connections.
I would recommend you follow all the steps and options in
Cannot connect to database master at SQL server
and
SharePoint Install – Cannot connect to database master.
More information:
Configuring Service Connection Points for SharePoint 2013:
http://onpointwithsharepoint.blogspot.in/2013/06/configuring-service-connection-points.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Unable to create SASL client connection for authentication mechanism [PLAIN
I have problem to use dscc to admin my ds/dps servers, since I the dscc can't contact dscc agent. Though the agent is running on the default port number with network-bind-port of 0.0.0.0, there is nothing I can do to fix it.
I debug the problem, and found following errors in server.log under dscc (deployed on SUN AS 8.2):
Message: Unable to create SASL client connection for authentication mechanism [PLAIN]|#]
[#|2007-08-21T15:28:40.252-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.SASLClientHandler.initialize(SASLClientHandler.java:124)|#]
[#|2007-08-21T15:28:40.253-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:131)|#]
[#|2007-08-21T15:28:40.254-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)|#]
[#|2007-08-21T15:28:40.256-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)|#]
[#|2007-08-21T15:28:40.257-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)|#]
[#|2007-08-21T15:28:40.258-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)|#]
[#|2007-08-21T15:28:40.260-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getJmxConnector(NquickClient.java:816)|#]
[#|2007-08-21T15:28:40.261-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnector(NquickClient.java:519)|#]
[#|2007-08-21T15:28:40.262-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnectorSystemAuthentication(NquickClient.java:314)|#]
[#|2007-08-21T15:28:40.263-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool.getSyncServerMBean(NquickPool.java:435)|#]
[#|2007-08-21T15:28:40.264-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool$1.run(NquickPool.java:320)|#]
[#|2007-08-21T15:28:40.271-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | java.lang.Thread.run(Thread.java:534)|#]
[#|2007-08-21T15:28:40.289-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageTitleAlertAndText | Node has no attributes.|#]
[#|2007-08-21T15:28:40.293-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageActions | Could not obtain pageactions element.|#]
[#|2007-08-21T15:28:40.295-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageViewsMenu | Could not obtain pageviews element.|#]
Please help if you could figure out what's going on. Thanks!Bug ID: 6551672
Synopsis: SunAS claims "Unable to create SASL client conn for auth mechanism" and do not talk to Cacao
Work Around:
Work arround:
Change the JVM of used by App Server.
Edit the file:
/usr/appserver/config/asenv.conf
and replace
AS_JAVA="/usr/j2se"
by
AS_JAVA="/usr/java"
Then restart your AS domain. -
I am unable to create reminders or events in iCal with my iPhone 5
I am unable to create reminders or events in iCal with my iPhone 5.
Go to settings>iCloud and turn Contacts and Calender on.
-
Unable to create site hierarchy for any variation label
I am unable to create a site hierarchy for our source variation and any subsequent variation labels we setup. The error when trying to do so is:
“An error was encountered performing this operation.
You may re-try the operation, and you may need to clean up the half-created data first before re-trying. If the problem persists, please contact your system administrator. “
We have a test farm which didn't have this problem.
Any help gratefully received.Thanks Mark. I'll certainly give that a try. But today I started digging into the SharePoint Logs and found this entry:
10/01/2007 11:42:59.28 w3wp.exe (0x1240) 0x17FC Windows SharePoint Services Runtime 8yr8 Exception An unhandled exception has occurred. Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'. System.InvalidCastException: Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'. at Microsoft.SharePoint.Publishing.PublishingPage.FixWebPartUrlsForVariation() at Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.CreateVariantPage(PublishingPage sourcePage, PublishingWeb targetArea, String destPageWebRelativeUrl, String pageLayoutName, String title, String description, Boolean copyResources, Boolean enforceMajorVersion, SPWeb& webToClose) at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationInner(VariationLabel varla...
10/01/2007 11:42:59.28* w3wp.exe (0x1240) 0x17FC Windows SharePoint Services Runtime 8yr8 Exception ...bel, String pageLayoutName, String destPageName, String title, String description, Boolean copyResources, Boolean overrideStopUpdate, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, Boolean stopAutoSpawnAfterDelete, Boolean sendNotificationEmail, LongRunningOperationJob lroLogger) at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationAuto(VariationSettings variationSettings, VariationLabel varlabel, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, LongRunningOperationJob lroLogger) at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeepForChildren(VariationSettings variationSettings, PublishingWeb sourceParentPubWeb, VariationLabel varlabel, Boolean isCrea...
10/01/2007 11:42:59.28* w3wp.exe (0x1240) 0x17FC Windows SharePoint Services Runtime 8yr8 Exception ...teHierarchies, LongRunningOperationJob lroLogger, List`1 errors) at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeep(VariationSettings variationSettings, ReadOnlyCollection`1 varLabels, Boolean isCreateHierarchies, Boolean recurse, LongRunningOperationJob lroLogger, List`1 errors) at Microsoft.SharePoint.Publishing.Internal.VariationSettings.CreateHierarchies(LongRunningOperationJob lroLogger, List`1 errors) at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.CreateVariationHierarchies() at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.DoWork() at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__11() at Microsoft.Office.Server.Diagnostics.Fir...
10/01/2007 11:42:59.28* w3wp.exe (0x1240) 0x17FC Windows SharePoint Services Runtime 8yr8 Exception ...stChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock) at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowException, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock) at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__f() at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock) at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowExcep...
10/01/2007 11:42:59.28* w3wp.exe (0x1240) 0x17FC Windows SharePoint Services Runtime 8yr8 Exception ...tion, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock) at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.ThreadEntryPoint() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()
This exception totally amazes me because I thought from WSS 3.0/MOSS 2007 onwards all Web Parts could be derived from System.Web.UI.WebControls.WebParts.WebPart. So does this mean I will have to change all of them?
Did you run into anything similar?
Thanks. -
Unable to create a test via Content Management via Content Administration
I am unable to create a test or survey via Content Management via Content Administration because insufficient privileges message. I create the folder and enter the test information for creating a test and then I after I click apply. I get message “You have insufficient privileges for the current operation. Please contact your System Administrator”.
The System Administrator viewed the profile being tied to the responsibility and thinks there is no problem. Somebody please!!!!!!!!!!!!!!
Help……Hi, James.
If you add the main "Learning Administrator" role (UMX|OTA_LRNG_ADMIN), it will include all child roles for the Administrator, including the Learning Content Administrator, Learning Catalog Administrator, Learning Enrollment Administrator, Learning Finance Administrator, Learning Resource Administrator, and Learning Setup Administrator. If you don't have all of these roles, there are functions you will not have access to under the Learning Administrator responsibilities.
The "Learning Instructor - Update" role only allows users that have the Learning Instructor Self-Service responsibility to update enrollment statuses for Learners that have attended classes that they are set as a resource for and won't impact the Administrator functionality.
Anne
Edited by: anne2 on Jun 5, 2013 2:09 AM (Fixed code for Learning Administrator role - Just noticed it was listed as the Enrollment Administrator role instead of the main Learning Administrator role)
Maybe you are looking for
-
How do i get non-tunes videos on to my ipod?
i have a 30G ipod video i have manged to get the videos into itunes but i cnt upload it to my ipod, if this problem can be fixed pls could u lert me know? or if its broke could u also let me now?
-
RSEOUT00 run sends duplicate IDOCs causing duplicate payments
We are using RSEOUT00 to send out payments to vendor using PAYEXT type. Program is run in background job mode on daily basis. Occasionally, 1 IDOC out of couple of hundred gives error and then program starts from the beginning and send out all IDOCs
-
Iphone 3g Dismiss button stuck. Also no service available. Help?
This is has been doing my head in! I've just bought this iphone from Ebay, upon turning it on you unlock the screen and it comes up with the whole rearranging icons and whatnot. But the dismiss button is stuck and nothing works! People have come up w
-
How Oracle compute the cardinality if no stats
Hi 9.2.0.6 very simple query SELECT * FROM TRFPRDTXT.F559215A WHERE (QALOTN = :KEY1) | Id | Operation | Name | Rows | Bytes | Cost | | 0 | SELECT STATEMENT | | 2 | 392 | 2 | | 1 | TABLE ACCESS BY INDEX ROWID| F559215A | 2 | 392 | 2 | |* 2 | INDEX RAN
-
Hi, Please give me a few URLs or documents to understand Database Design techniques thorughly for both OLTP and Data Warehousing projects, thank you. Regards, DR