Unable to create a customizing request to transport BPC10 content to Quality

Hi
Unable to create a customizing request to transport BPC10 content to Quality .
From the transport connections tab, i am selecting the required objects and then clicking the transport truck but it does not pop up and ask for a transport request .
So please provide any solution.

Hi,
Check whether Standard transport switched-on is enabled or not. To get transport request your setting should be as follows : RSA1-->Transport Connection-->Edit-->Transport
Hope it helps...
regards,
Raju

Similar Messages

Unable to Create a Customer in Accounts Receivable

Hi,
I am unable to create a customer in Accounts Receivable module (in Ver 12.0.04). I am getting the following error message.
FND_SESSION_MANAGEMENT.UPDATESESSIONCONTEXT SQLException: java.sql.SQLException: OALL8 is in an inconsistent state
Could some one help me on resloving the issue.
Thanks
Vijendra

hi
USE tcode <b>VD01</b> in order to create a customer for SD which will have sales area data.
for centrally itis XD01
regards

Cisco CA + Cisco VPN Client - Error 42: Unable to create certificate enrolment request

We find ourselves in a difficult situation with the
Cisco VPN Cleint version 5.0.07.0290 where it keeps giving us an
"Error 42: Unable to create certificate enrolment request" when we attempt to use the Online enrolment method to create and enrol a new certificate.
There is no additional information in the VPN client logs where we have set 3-High for all logs.
In addition, Wireshark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
To create and enrol a certificate we do the following:
1. Click on the Enroll button to show the Certificate Enrolment dialog
2. Select Online
3. Select <New> for Certificate Authority
4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825)
5. Click Next to display the dialog where we can enter certificate details
6. Enter details in all fileds except IP Address and Domain
7. Click Enroll which shows a dilaog with the Error 42 ... message in it.
If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrolment request.
The fact that the client does not send any messages to the Cisco CA leads us to belive that we have a pronblem on the clinet machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem.
We will be grateful for any assistance that you can provide with this issue. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the clinet on a Windows 7 64bit machine and attempted the steps listed above.
Thank you
Emil

FYI, I just came up against this problem and the solution in my instance was to ensure that the Cisco CA Server was configured to automatically grant certificate requests.
Cisco2691#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Cisco2691(config)#crypto pki server CERTSERVER
Cisco2691(cs-server)#grant ?
auto Automatically grant incoming SCEP enrollment requests
none Automatically reject any incoming SCEP enrollment request
ra-auto Automatically grant RA-authorized incoming SCEP enrollment request
Cisco2691(cs-server)#grant auto
% The CS config is locked. You need to shut the server off before changing its configuration.
Cisco2691(cs-server)#shut
Cisco2691(cs-server)#grant auto
Cisco2691(cs-server)#
Mar 25 19:39:53.356: %PKI-6-CS_GRANT_AUTO: All enrollment requests will be automatically granted.
Cisco2691(cs-server)#no shut
% Certificate Server enabled.

Create a custom Request Template

Hello,
i need to create a custom request template.
Custom Template = Create user + disable user.
The request should be creating a user and disabling them automatically.
1. What is the correct way to realize this scenario?
2. Do i need bpel processes for that?
3. Where are the default request templates stored in oim? Is it possible to modify the 'create user' template and add the 'disable user' functionality?
Many thanks in advance!

1) Use these templates. Create and Disable User.
3)__Default Request Template in OIM:__
1-Assign Roles:Default template for assigning roles to users
2-Create User:Default template for creating users
3-De-Provision Resource:Default template for deprovisioning resources
4-Delete User:Default template for deleting users
5-Disable Provisioned Resource:Default template for disabling provisioned resources
6-Disable User:Default template for disabling users
7-Enable Provisioned Resource:Default template for enabling provisioned resources
8-Enable User:Default template for enabling users
9-Modify Provisioned Resource:Default template for modifying provisioned resources
10-Modify Self Profile:Default template for modifying self profile
11-Modify User Profile:Default template for modifying user profiles
12-Provision Resource:Default template for provisioning resources
13-Remove from Roles:Default template for removing users from roles
14-Self-Register User:Default template for self registering users
15-Self-Request Resource: Default template for requesting resources for self
Default template are:
Go to Advanced Administration-->left pane of the Request Templates -->Advanced Search
To modify:
Select a template name in the search results table.--> Actions menu, select Open.
Template Details section-->the details of the template are displayed in the fields
I hope this helps,
Thiago Leoncio

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Create a Shipment Request in Transport mgt system through XI

Hi All,
I'm trying to create a shipment request in SAP TM System 7.0 from SAP ECC 6.0 thru PI 7.0.
Once output message type is saved in Outbound delivery in ECC, the xml message is comming to PI.
(Service to service scenario) i'm using xi adapter in receiver side of PI.
Queue is getting created in TM System and i'm trying to process through SMQ2. But shipment request didnt get created in TM System.Thanks in advance for any help.
I searched in forum and didnt get any idea.Also provide anyother best solution for this scenario.
Thanks
Hari

Hi,
Actually this is not the right place for your question,please look in to Java Development infrastructure Forum.However i will answer your query.
System admin has to create domain(Three letter word)
if you check this url http://<server>:port/devinf as you mentioned you will get DTR,CBS and CMS.With cmsadm user you can create track before that you have to creta Software component.
if you post what, message you are getting it helps us to answer.
Regards,
RK

Unable to Create a custom folder in Discoverer Administrator

Hi,
I have a discoverer report which is based on on standard query(Which cant be modified).The requirement is to add a new column to it which doesn't exist in that folder.I can create a custom folder and add the column to the report,but the problem is whenever i create the folder and hit the Validate SQL button it is throwing the error " *The custom SQL entered is not valid SQL statement - ORA-00942: table or view does not exist* "
I have all the privileges for the user and when I am trying to validate the existing queries ,it is throwing the same error .
Discoverer Version - 4 i
Oracle Application - 11.5.9
Appreciate your help .
Thanks ,
Vijay

Hi,
Creating new folders should be done when you are logged on as an application user.
If your application user does not have admin access to the EUL then log on the Disco Admin as the EUL owner and grant full admin privileges to an applications user or responsibility.
Then logon to Disco Admin with that user or responsibility. You should then be able to create and import folders.
Rod West

Unable to create a custom tag

Hi All
i am trying to make a custom tag in jsp2.0. I have made the java class which override the doTag method. I have created the tld file and put it in the directly WEB-INF FOLDER.I have written a jsp as well which uses this tag and the uri in the jsp mathces the uri in the tld file. Then it gives me the error message that unable to find the tld file.
then i made entry in the web.xml as well but now it is giving me an error:
JSPG0227E: Exception caught while translating /UseCustom.jsp: /UseCustom.jsp(19,1) --> JSPG0009E: Unable to load tag handler class com.hcl.taghandlers
I am using jstl 1.1 and jsp2.0 and the IBM Rational editor.
please help as soon as possible.
thanks in advance!!!!!!!!

There was a very minute syntax mistake in the web.xml.
now it is working fine.
By the thanks to all those who devoted some time to think over it.

Unable to create entry under Product Specific Transportation Lane by BAPI Function Module

I am developing one RFC function module which will trigger BAPI_TRLSRVAPS_SAVEMULTI2 to create transportation lane (/n/SAPAPO/SCC_TL1) in APO. But I am facing one problem while creating a new entry under “Product Specific Transportation Lane”. But I am not able to pass ‘Group Selection’ radio button field in BAPI11201TRPRODLANE2 structure since I am not getting suitable field, but Product Group Type and Product Group value I am able to pass. Can anyone help me if you have any idea on this?

Hi Siva,
Thaks for those function modules. I tried with '/SAPAPO/TR_TRPRODM_PUT'. This deletes from table /SAPAPO/TRPRODM but not from /SAPAPO/TRM and so the means of transport still appears in the transaction. Do you have any idea why it behaves this way.
Thanks

When Creating OR, customer requested date is coming two days after ???

Dear Pals,
When ever I am creating OR, requested date of delivery is not the present date, but it is coming after two days(i.e. if I request for today, it is giving after Plus two days). I have checked at VOV8 for the proposed date, I have not mentioned any specific date. Please let me know, how to over come this.
Regards
Madhu Vaddi

Hi Madhu,
plz do like :
1.VOV8 Lead time - 0 or Blank
2. propsed del date - tick
3. date type - days
4. VOV7 - Schedule line relevent
untick
5. VTLA- Document flow shud be tick at item level.
let me know ur query status
thanks
mahi

Unable to refer to custom resource bundle in WPC content rendered with xslt

Hi,
I need to use the resource bundle messages inside WPC content.
When rendered by standard xsl templates the call to XSLTHelper class is done to retrieve message from the standard SAP resource bundle com.sap.nw.wpc.bundles.core.properties, like this:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:wpc="com.sap.nw.wpc.km.service.editor.hslt.XsltHelperCore">
<xsl:value-of select="wpc:getString([key defined in sap bundle], string(/document/@locale))"/>
The problem is that helper class doesn't provide any API to use custom bundles.
I tried to create xslt helper (including config in KM), but that didn't succeed neither. It would return with error NoClassDefFound.
Could you please help on configuring xslt helper and registering it with xslt rendering engine for Web Page Composer? I could not find any how-to guides on xslt helpers for WPC.
Thanks in advance.
Ruslan

Hi
Did you find a solution?
Christof

Unable to Create Transport request in more then one DEV client (in ChaRM)

Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
Kathir

Hi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM

Unable to create custom analytic in dashboard and analytics in infoview

Hi all,
i am unable to create a custom analytic in dashboard and analytics in infoview, the error i am getting is there is no xcelsius template available consult xcelsius .
Need help ?
regards
Abid Paul

Hello Falk,
thanks for the reply
this is not the error i am getting in Xcelsius.but this is the error which i am getting in INFOVIEW BO edge standard 3.1 when i am trying to create custom analytic in corporate dashboard FROM INFOVIEW.
THE error i am getting is there are no xcelsius templates availabe consult xcelsius.
i would really appreciate if you could help me regarding this
Regards and thanks
ABID PAUL

Creating an approval workflow for a customized request form

Hello,
I have created a customized request form in FIM that users are to fill up and submit for rights request. A workflow is required for for request process from the requester an escalation of approvers for the request to be approved or denied.
My challenges are:
Adding a control to my xml configuration file that will allow users to select multiple items, a checkbox feature with a list of rights to apply for
Creating a workflow for the customized request form, so that the approvers receive mail with the details filled on the form as the body text of the mail.?
How can I achieve these? I will greatly appreciate your help.
Regards,
Josephine

I would suggest you go through this walkthrough here:
http://technet.microsoft.com/en-us/library/ee534919(v=ws.10).aspx
and this is also very helpful:
http://blog.msresource.net/2012/07/13/including-who-approved-or-rejected-an-approval-in-its-notification-email/
- You need an email template with all your custom content
- you need a notification workflow containing the recipient Information
- you need a MPR starting the workflow when the user checks the box
- FIM needs to know the email attribute of the approver to be able to send the mail
- the owner Attribute of the Group must be set, this is the recipient of the approval mail in case of the Default owner approval workflow. in your case you set the appropriate Attribute of the group
- and of cause the Connection between FIM and Exchange must be available. If not, you see a lot of Errors and warnings in the eventlog.
Henry

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Unable to create a customizing request to transport BPC10 content to Quality

Similar Messages

Maybe you are looking for