Unable to create a inner join

Hello Experts!
I am creating a NW7.1 Laptop application ,I am creating the queries using the query editor in NW DS, I have a scenario where in I need to display data from 2 Data objects using a join condition. In the query editor I am able to see the button Add join conditions for relations in it, but when I click on it I am not able to set the join condition. Please suggest the right way of creating the join.
I also have one more doubt in this, for displaying data using inner joins between 2 data objects Do i need to create association between the data objects in DOE?
Thanks
Regards
Sagar
Edited by: sagark on Jun 8, 2010 2:45 PM

please check the documentation link:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
Regards,
Nipun

Similar Messages

Help with inner join PLEASE IGNORE

Hi I was doing a select with a subquery but I need that the where clause check to values so I couldn't get it so I decided to create a INNER JOIN
Before
insert into BPMTEMP (select * from ODS_VIEWER.BAN_EVENTOS_CONFIRMACION@DBLINK1 where id_solicitud and accion not in (select (id_solicitud, accion) from ODS_VIEWER.BAN_CONFIRMA_RESPUESTA@DBLINK1) and rownum <=200);but the problem with the inner join is that it doesn't accept me the external database source
insert into BPMTEMP (select ODS_VIEWER.BAN_EVENTOS_CONFIRMACION@DBLINK1.*, ODS_VIEWER.BAN_CONFIRMA_RESPUESTA@DBLINK1.*
from ODS_VIEWER.BAN_EVENTOS_CONFIRMACION@DBLINK1
INNER JOIN ODS_VIEWER.BAN_CONFIRMA_RESPUESTA@DBLINK1
ON [email protected]_solicitud = [email protected]_solicitud
ON [email protected] = [email protected]
AND rownum <=200); it shows an:
ORA-02084:
     database name is missing a component
Cause:      supplied database name cannot contain a leading '.', trailing '.' or '@', or two '.' or '@' in a row.
how can I solve this????
thanks for your help
Edited by: Diego Guillen on 29/12/2009 11:14 AM

Hi
Please remove the @dblink stuff in the column descrptions or use a table alias. This should help.
drop database link lokal;
create database link lokal
   CONNECT TO whateveruserineed IDENTIFIED BY whateverthing
   USING 'lokal11g';
select HR.COUNTRIES.* from HR.COUNTRIES@lokal;
select x.* from HR.COUNTRIES@lokal x;And as Dan Morgans says, pls. post you ? in the right forum next time :-))
Mette

Inner join searches too many entries

Hi experts,
In a user exit following code is used:
DATA : h_rsnum LIKE afko-rsnum,
       h_charg LIKE resb-charg,
       h_matnr LIKE resb-matnr,
    SELECT SINGLE rsnum INTO h_rsnum
                 FROM afko
                 WHERE aufnr = x_bncom-aufnr.
    IF sy-subrc = 0 .
      SELECT resbcharg resbmatnr
              INTO (h_charg, h_matnr)
              FROM mara INNER JOIN resb
                ON maramatnr = resbmatnr
                WHERE resb~rsnum = h_rsnum
                AND resb~charg NE space
                AND maramtart = 'HALB' OR maramtart = 'FERT'.
      ENDSELECT.
Goal of the source code is to detemine the reservation number of a process order. From table RESB with key h_rsnum, the material nb and the batch nb of the single material with material type HALB or FERT needs to be selected.
During debugging I found out that this code searches into a very long list of materials before ending up with the correct h_charg and h_matnr.
If the condition resb~rsnum = h_rsnum would be taken into account when creating the inner join, the list would only contain 20 materials maximum.
Can this behaviour be changed and how to do it?
Rgds,
Suzy

if this is inside a user exit 1st of all why are you using a select endselect and i dont see you take that in to a table which means your only looking for one record.
about you tell that before the inner join taking the where condition into consideration. I dont think it will be possible sine normally after making the join it should go for the where condition anyway ill try to check on it and see.
sometimes Siegfried might know an answer dont know if he saw this.
Nafran
Edited by: Nafran Shiraz on Jun 4, 2009 12:36 PM

How to Join two tables using the Inner Join

Hi All,
I have two tables i.e table1 and table2 as i have created two otds and my present requirement is to join this two tables and get the results and using this i need to do some logic and update another table3.
can some one help me out how to go for the above req.
Thanks in Advance
Srikanth

The best efficient way to use inner join is create two input otds,use there otd's in create a collaboration usinf etl.
after selecting two input otd's create a inner join statement and map it to out put otd.
while using the etl the performance of the over all integration is increased 20 time of the normal integration.
Hopes this will helps,,
Thanks,
Papa Rao.

Help: Modifying inner join

Hello Folks,
I have an Access Query and am rewriting the whole query in Oracle to run a report.The thing is Am a beginner in oracle and am scratching my head on how to modify this inner join. please help me in rewriting this inner join in oracle. thanks a million
   ((Debtor INNER JOIN MAX_TRANS_DATE AS MAX_TRANS_DATE_1 ON Debtor .
        EVENT_ID = MAX_TRANS_DATE_1.EVENT_ID) INNER JOIN
        TMP$ALL_RECOVERY_TYPE
        ON(Debtor . EVENT_CASE_ID = TMP$ALL_RECOVERY_TYPE . EVENT_CASE_ID) AND
        (Debtor . EVENT_ID = TMP$ALL_RECOVERY_TYPE . EVENT_ID))
INNER JOIN CUBS TRANSACTIONS
    ON (Debtor . EVENT_ID = CUBS TRANSACTIONS . EVENT_ID)
   AND (Debtor . EVENT_CASE_ID = CUBS TRANSACTIONS . EVENT_CASE_ID)

Thanks for getting back. But still am unable to get the correct data. I will try to break it down.
Microsoft Access Table MAX_TRANS_DATE menitoned above in the inner join was originally coming from table called TRANSACTIONS i.e.( MAX_TRANS_DATE = SELECT [Transactions].[EVENT_ID], Max([Transactions].[TRANSDATE]) AS MaxOfTRANSDATE
FROM Debtor INNER JOIN Transactions ON [Debtor].[EVENT_ID]=[Transactions].[EVENT_ID]
GROUP BY [Transactions].[EVENT_ID];
Here the problem is am recreating the access database query in oracle database and we dont have MAX_TRANS_DATE in the Oracle database but we do have TRANSACTIONS table.
So i just used TRANSACTIONS in the inner join instead of MAX_TRANS_DATE.
But the result is wrong.The Field Transdate from TRANSACTIONS is pulling dates as 10/5/2006 instead of 02/01/2010. I suspect something is wrong with the joins.Please help me. I can provide the old access query and the new oracle query that i have created.
Thanks
Edited by: user11961230 on Mar 5, 2010 11:49 AM

Unable to discover Why No Join Predicate

Please help me, I have this query:
select pc.Val,
PC2.Valstring as valstring,
pc.ValString as MessageType,
pc2.Val as Port
from dbo.tblproperty p with(nolock)
inner join dbo.tblpropertycfg pc with(nolock) ON p.pkPropertyID = pc.fkPropertyID
inner join dbo.tblpropertycfg pc2 with(nolock) ON p.pkPropertyID = pc2.fkPropertyID
where p.pkPropertyID = 5
and pc.Concept = 'PBX'
and pc2.Concept = 'PBXIP'
I am attaching the Excution Plan, this plan showing "No Join Predicate" Warning, I am unable to discover where is the problem, please help.

Hi SathyanarrayananS:
Thank you for your support, when you say "are there any chance they are UDF or View" you mean if I could create and UDF or View with those tables?, because both tables are physical.
I am already readed the link and IMHO my query does not meets on any of examples provided.
As you can see, the first joins using the table, does not cause NJP, but when we apply the third join is when the NJP arise.
Do you need additional information about my schema?
Best regards.

Unable to create report. Query produced too many results

Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
        <br>
        <br>
        Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
   at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
   at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.

Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
              maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to create cluster, hangs on forming cluster

Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          29/08/2008 19:43:14
Event ID:      1570
Task Category: None
Level:         Critical
Keywords:
User:          SYSTEM
Computer:      <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
    <EventID>1570</EventID>
    <Version>0</Version>
    <Level>1</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
    <EventRecordID>4481</EventRecordID>
    <Correlation />
    <Execution ProcessID="2412" ThreadID="3416" />
    <Channel>System</Channel>
    <Computer>NODE2</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          01/09/2008 12:42:44
Event ID:      1207
Task Category: Network Name Resource
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.

I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate.

Data is not fetching in inner join

Hi Experts,
I developed a select query using inner joins, all the fields data is gettting appended, but one field DISPO data is not getting appeneded. please check the innerjoin and suggest me ur soluitons.
MODULE GET_DATA OUTPUT.
select   arbpl
         sptag
         aufnr
         plnum
         posnr
         plnfl
         werks from s022
                    into table it_s022
                     where arbpl in s_arbpl
                      and werks in s_werks
                      and sptag in s_sptag
                      and matnr in s_matnr.
if sy-subrc eq 0.
select a~aufnr
       a~posnr
       a~kdauf
       a~pgmng
       a~plnum
       a~strmp
       b~plnty
       b~gamng
       b~igmng
       b~iasmg
       b~rmnga
       b~gstrp
       b~rsnum
       b~plnbez
       b~dispo
       c~maktx
       b~plnnr
       b~plnty
       b~zaehl
       d~vornr
       d~ltxa1
       b~aufpl
       b~aplzt
       e~astnr
       into corresponding fields of table it_afpo from afko as b
                inner join afpo as a
                 on a~aufnr = b~aufnr
                inner join makt as c
                 on b~plnbez = c~matnr
                inner join plpo as d
                 on b~plnnr = d~plnnr
                  and b~plnty = d~plnty
                  and b~zaehl = d~zaehl
                 inner join aufk as e
                  on b~aufnr = e~aufnr
                inner join marc as f
                 on bplnty = fmatnr
                for all entries in it_s022
                 where b~aufnr = it_s022-aufnr.
                     and e~erdat = it_s022-sptag
                 and a~posnr = it_s022-posnr
                and a~plnum = it_s022-plnum . .
if sy-subrc eq 0.
    it_afpo1[] = it_afpo[].
    sort it_afpo1 by aufpl." aplzt."""
    delete ADJACENT DUPLICATES FROM it_afpo1 COMPARING aufpl." aplzt ."""
    select aufpl
           aplzl
           fsavd
           fsavz
           ssedd
           ssedz
           mgvrg
            FROM afvv INTO TABLE It_afvv
                           FOR ALL ENTRIES IN IT_afpo1
                           WHERE aufpl = IT_afpo1-aufpl.
                            and aplzl = it_afpo1-aplzt.
   endif.
loop at it_afpo into wa_afpo.
DATA : G_SLNO(8) TYPE C.
G_SLNO = G_SLNO + 1.
wa_afpo-slno = g_slno.
    move-corresponding wa_afpo to wa_final.
   move-corresponding wa_afko to wa_final.
read table it_afvv into wa_afvv with key
            aufpl = wa_afpo-aufpl binary search."aplzl = wa_afpo-aplzt binary search."""
*read table it_afko into wa_afko with key aufnr = wa_final-aufnr.
IF SY-SUBRC EQ 0.
    move-corresponding wa_afvv to wa_final.
bal_qty = wa_final-gamng - wa_final-igmng.
    move : wa_afpo-slno to wa_final-slno,
           wa_afpo-aufnr to wa_final-aufnr,
           wa_afpo-posnr to wa_final-posnr,
           wa_afpo-kdauf to wa_final-kdauf, " Sales order Number
           wa_afpo-pgmng to wa_final-pgmng, " Order item qty
           wa_afpo-plnum to wa_final-plnum, " Planned Order Qty
           wa_afpo-strmp to wa_final-strmp, " Planned Order Date
           wa_afpo-gstrp to wa_final-gstrp, " Basic Finish date
           wa_afpo-rsnum to wa_final-rsnum, " Number of Reservation
           wa_afpo-plnbez to wa_final-plnbez, " Material Number
           wa_afpo-maktx to wa_final-maktx,
           wa_afpo-plnnr to wa_final-plnnr,
           wa_afpo-plnty to wa_final-plnty,
           wa_afpo-zaehl to wa_final-zaehl,
           wa_afpo-vornr to wa_final-vornr,
           wa_afpo-ltxa1 to wa_final-ltxa1,
           wa_afpo-aufpl to wa_final-aufpl,
           wa_afvv-fsavd to wa_final-fsavd,
           wa_afvv-fsavz to wa_final-fsavz,
           wa_afvv-ssedd to wa_final-ssedd,
           wa_afvv-ssedz to wa_final-ssedz,
           wa_afvv-mgvrg to wa_final-mgvrg,
           wa_afko-igmng to wa_final-igmng,
           wa_afko-iasmg to wa_final-iasmg,
           wa_afko-rmnga to wa_final-rmnga,
           wa_afko-dispo to wa_final-dispo,
          wa_afko-bal_qty to wa_final-bal_qty,
           wa_aufk-astnr to wa_final-astnr,
           wa_afpo-text to wa_final-text.
*bal_qty = wa_final-gamng - wa_final-igmng.
*bal_qty = wa_afko-bal_qty.
endif.
append wa_final to it_final.
clear:wa_final ,wa_afpo,wa_afvv,wa_aufk,wa_afko.
endloop.
endif.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module DISPLAY_DATA OUTPUT
      text
MODULE DISPLAY_DATA OUTPUT.
IF REF_CONTAINER IS INITIAL.
     PERFORM FIELD_CAT.
CREATE OBJECT REF_CONTAINER
EXPORTING
       PARENT                      =
    CONTAINER_NAME              = 'CUSTOM_CONTROL'
       STYLE                       =
       LIFETIME                    = lifetime_default
       REPID                       =
       DYNNR                       =
       NO_AUTODEF_PROGID_DYNNR     =
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        others                      = 6
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
L_LAYO-ZEBRA = 'X'.
L_LAYO-GRID_TITLE = 'JOB CARD'.
data: variant type disvariant.
CREATE OBJECT REF_ALV_GRID
    EXPORTING
       I_SHELLSTYLE      = 0
       I_LIFETIME        =
      I_PARENT          = REF_CONTAINER
       I_APPL_EVENTS     = space
       I_PARENTDBG       =
       I_APPLOGPARENT    =
       I_GRAPHICSPARENT =
       I_NAME            =
       I_FCAT_COMPLETE   = SPACE
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        others            = 5
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_variant-report = sy-cprog.
*data: l_prnt type lvc_s_prnt.
*l_prnt-print = 'X'.
SORT T_FCAT.
call method ref_alv_grid->set_ready_for_input
   exporting
    i_ready_for_input = 1.
create object event_receiver.
   set handler event_receiver->handle_top_of_page for ref_alv_grid.
CALL METHOD REF_ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
       I_BUFFER_ACTIVE               =
       I_BYPASSING_BUFFER            =
       I_CONSISTENCY_CHECK           =
       I_STRUCTURE_NAME              =
        is_variant                     = variant   "l_variant
        i_save                        = 'X'
       I_DEFAULT                     = 'X'
         IS_LAYOUT                     = L_LAYO
       IS_PRINT                      =
       IT_SPECIAL_GROUPS             =
       IT_TOOLBAR_EXCLUDING          =
       IT_HYPERLINK                  =
       IT_ALV_GRAPHICS               =
       IT_EXCEPT_QINFO               =
       IR_SALV_ADAPTER               =
    CHANGING
      IT_OUTTAB                     = IT_final[]
      IT_FIELDCATALOG               = T_FCAT
       IT_SORT                       =
       IT_FILTER                     =
      EXCEPTIONS
        INVALID_PARAMETER_COMBINATION = 1
        PROGRAM_ERROR                 = 2
        TOO_MANY_LINES                = 3
        others                        = 4
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   create object g_event_receiver.
   set handler g_event_receiver->handle_user_command for ref_alv_grid.
   set handler g_event_receiver->handle_toolbar for ref_alv_grid.
§ 4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
   call method ref_alv_grid->set_toolbar_interactive.
   call method cl_gui_control=>set_focus exporting control = ref_alv_grid.
ENDIF.
ENDMODULE.                 " DISPLAY_DATA OUTPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN001'.
SET TITLEBAR 'xxx'.
Regards,
Bharath Kumar

I agree with Shiva Kumar - most likely there is no such field in it_afpo. A few more suggestions though:
1) Do not post large pieces of code here - if you have a question about a particular SELECT statement, post only that statement and relevant data definitions. No one is going to read your whole program anyway - we have work to do too.
2) Your JOIN is way too big and would be difficult to analyze if anything goes wrong. You might want to start with smaller SELECTs and, when you're sure everything is working correctly, then combine them into one. Also huge JOINT is not necessarily more efficient.
3) You don't have to use aliases "AS a... AS b", etc. Instead, just use the table name, e.g. AFKO... AFPO... .It is much easier to read this way. The aliases are needed only if you're joining the same table more than once. Also they're not limited to one letter either.

Convert SSRS dropdown MDX query to INNER JOIN w/ NONEMPTY? Having hard time with this.

I'm having an incredibly hard time with this, mostly because I'm very new with MDX.
I created a simple report (with AdventureWorksDW) whose datasource is an SSAS cube. I select a datekey from the dropdown menu, and the report displays [Measures].[Order Quantity] for that day.
The problem is that the dropdown displays every single value from the dimdate dimension. DimDate goes from 20050101 to 20201231, so the dropdown is very long.
How can I alter the SSRS-generated MDX so that it does an INNER JOIN with Fact table and only the dates shown in the dropdown are the ones where there's data in the Fact table?
Currently, the fact table only has 2 days of data (20141015, 20141016), which means that the dropdown should only display those two dates. I'm including the generated code MDX that populates the dropdown menu:
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS , [Dim Date].[Date Key].ALLMEMBERS ON ROWS
FROM [Adventure Works cube]
Any help is appreciated.
VM

Hi vmhatup,
you can get rid of blank data using nonempty function and get rid of negative values using filter function nonempty should be inside of filter so it applies first, otherwise it is too slow.
Your statement could look like this
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS
, filter(
nonempty([Dim Date].[Date Key].[Date Key],measures.measureName)
,measure.measurename >0
ON ROWS
FROM [Adventure Works cube]
Jiri Neoral

OBIEE error: Getting error in creating cross database joins

Hi,
We are trying to create a cross database join in OBIEE.
CHild table is on SQL server and we are using ODBC 3.5 call interface to connect.
Parent table is in Oracle
11.2.0.3.0
Each table can be queried separately. Main task required was to fetch records from Oracle based on records returned by SQl server (Query based on other saved request).
The count of inner query got increased to 30,000 due to which we got too many records in IN predicate error.
Now while creating cross database join between Oracle and SQL server we are getting following error:
[nQSError: 10058] A general error has occured. ODBC state: 37 000
code: 102 message: [microsoft][ODBC SQL Server driver][SQL Server] Incorredt Syntax near 'Session'
[nQSError: 16015] SQL statement execution failed.

Hi,
Could you give a bit more of context for this case? The table in SQL server; Is it a dimension and the one in Oracle DB is a fact? I am guessing, you have set up the driving table here. Have you given a try taking it off, and let BI Server do the filter in memory?
-Dhar

For All Entries is NOT better than INNER JOIN in most cases

I quote from Siegfried Boes' excellent post here: Will writing an inner join be better or creating a view?
For all the FOR ALL ENTRIES lovers ... there is no proof for these reappearing recommendation.
There is nearly nobody who receives forum points, who recommends FOR ALL ENTRIES instead of Joins. What is the reason ???
It is easier to prove the opposite. A Join is a nested loop inside the database, a FOR ALL ENTRIES is partly outside of the database. FOR ALL ENTRIES works in blocks, joins on totals.
FOR ALL ENTRIES are not recommded on really large tables, because the chances are too high that
too many records are transferred.
People prefer FOR ALL ENTRIES, because JOINs are not so easy to understand. Joins can go wrong, but with a bit of understanding they can be fixed.
Some Joins are slow and can not be fixed, but then the FOR ALL ENTRIES would be extremely slow.
There are several kinds of views:
- projection views, i.e. only one table involved just fields reduced
- join views, several tables, joins conditions stored in dictionary
- materialized views, here the joined data are actually stored in the database. Storing and synchronisation has to be done manually.
Only the last one creates real overhead. It should be the exception.
Join Views and Joins are nearly identical. The view is better for reuse. The join is better in complicated, becuase if the access goes wrong, it can often be fixed by adding a hint. Hints can not be added to views.
Abraham Bukit points out:
If it is cluster table, (you can't use join). If it is buffered table, I would also say avoid join.
If they all are transaction table which are not buffered and are not cluster tables.
He further supports Siegfried's statement that FAE is easier to undestand than INNER JOINs.
Thomas Zloch says, regarding buffered tables:
At least think twice, maybe compare runtimes if in doubt.
So, unless someone has some EVIDENCE that FOR ALL ENTRIES is better, I don't think we want to see this discussed further.
Kind regards
Matt

To give food for thought here's an example I gave in a thread:
If you have a statement like
SELECT ... FOR ALL ENTRIES IN FAE_itab WHERE f = FAE_itab-f.
SAP sends it to the database depending how the parameter rsdb/prefer_union_all is set:
rsdb/prefer_union_all = 0 =>
SELECT ... WHERE f = FAE_itab[1]-f
          OR    f = FAE_itab[2]-f
          OR    f = FAE_itab[N]-f
You have some influence of the generated statement type: Instead of OR'ed fields an IN list can be used
if you have only a single coulmn N to compare:
rsdb/prefer_in_itab_opt parameter:
SELECT ... WHERE f IN (itab[1]-f, itab[2]-f, ..., itab[N]-f)
rsdb/prefer_union_all = 1 =>
SELECT ... WHERE f = FAE_itab[1]-f
UNION ALL SELECT ... WHERE f = FAE_itab[2]-f
UNION ALL SELECT ... WHERE f = FAE_itab[N]-f
see: Note 48230 - Parameters for the SELECT ... FOR ALL ENTRIES statement
As you can see for the 2nd parameter several statements are generated and combined with a UNION ALL,
the first setting generates statements with OR's (or uses IN if possible) for the entries in FAE_itab.
I give you a little example here (my parameters are set in a way that the OR's are translated to IN lists; i traced the execution in ST05)
Select myid into table t_tabcount from mydbtable
for all entries in t_table    " 484 entries
    where myid = t_table-myid .
ST05 trace:
|Transaction SEU_INT|Work process no 0|Proc.type DIA|Client 200|User |
|Duration |Obj. name |Op.    |Recs.|RC    |Statement|
| 640|mydbtable |PREPARE|   | 0|SELECT WHERE "myid" IN ( :A0 , :A1 , :A2 , :A3 , :A4 ) AND "myid" = :A5|
| 2|mydbtable |OPEN   |   | 0|SELECT WHERE "myid" IN ( 1 , 2 , 3 , 4 , 5 ) AND "myid" = 72 |
| 2.536|mydbtable |FETCH |    0| 1403|   |
| 3|mydbtable |REOPEN |   | 0|SELECT WHERE "myid" IN ( 6 , 7 , 8 , 9 , 10 ) AND "myid" = 72 |
| 118|mydbtable |FETCH | 0| |
| 2|mydbtable |REOPEN | | 0|SELECT WHERE "myid" IN ( 11 , 12 , 13 , 14 , 15 ) AND "myid" = 72     |
| 3|mydbtable |REOPEN | | 0|SELECT WHERE "myid" IN ( 475 , 476 , 477 , 478 , 479 ) AND "myid" = 72 |
| 94|mydbtable |FETCH | 0| 1403|   |
| 2|mydbtable |REOPEN |   | 0|SELECT WHERE "myid" IN ( 480 , 481 , 482 , 483 , 484 ) AND "myid" = 72 |
You see the IN list contained 5 entries each , wich made up about 97 statements for all 484 entries.
For every statment you have a single fetch operation wich means a separate access to the database.
If you would replace the FAE with a join you would only have one fetch to the database.
With the example above we can derive these observations:
1. From database point of view these settings kill performance when you access a big table and/or have a lot of entries or columns in your FAE_itab. Furthermore, you hide information what data you will access
at all and thus you block the database from creating a more efficient execution plan because it DOESN'T KNOW wich data you will select in the next step. I.e. it may be more efficient to scan the table in one shot instead of having many index accesses - but the database can make this decision only if it can examine ONE statement that has ALL the information of what data to retrieve.
2. A second impact is that with every statement execution you trigger the allocation of database resources
wich will contribute to the overhead described above.
Said that, FAE can never be a replacement for joining big tables (think of having a table with thousands of records in a FAE table )
Edited by: kishan P on Nov 2, 2010 2:16 PM - Format Fixed

Report -without inner join

hi,
this is report i created in this i used two tables and used inner join to make relation b/t these tables...
so my doubt is ..if we r using three diff.. tables without inner join we can do this report ......if u can.. plz can u show me wit example...
TABLES: VBAP,VBAK.
DATA : BEGIN OF ITAB OCCURS 0,
vbeln like VBAK-VBELN, "Sales Document No.
kunnr like VBAK-KUNNR,"customerno
VKORG like VBAK-VKORG,"salesorg
audat like VBAK-AUDAT,"documentdate
matnr like VBAP-MATNR,"materialno
netwr like VBAK-NETWR,"netamount
end of itab.
selection-screen : begin of block a1. "SCREEN 500 AS WINDOW..
select-options : KUNNR for VBAK-kunnr.
select-options : VKORG FOR VBAK-vkorg.
select-options : AUDAT for VBAK-audat.
select-options : MATNR for VBAP-matnr.
select-options : NETWR FOR VBAK-netwr.
SELECTION-SCREEN :end of block a1.
SELECT vbakvbeln vbakkunnr vbakvkorg vbakaudat vbapmatnr vbaknetwr into table itab from vbak
INNER JOIN vbap on vbakvbeln = vbapvbeln
where
VBAK~kunnr in kunnr
AND
   VBAK~VKORG in VKORG
and vbak~audat in audat
AND vbap~matnr in matnr.
write sy-dbcnt.
write:/ 'CUSTOMERNO' ,20 'SALESORG',40 'DOCUMENTDATE',60 'MATERIAL',80 'NETAMOUNT'.
ULINE.
loop at itab.
    write :/ itab-kunnr,20 itab-vkorg, 40 itab-audat, 60 itab-matnr, 80 itab-netwr.
    endloop.
thanx
bhanu

Refer to this psuedo code
SELECT vbak~vbeln vbak~kunnr vbak~vkorg vbak~audat vbap~matnr vbak~netwr into table itab from vbak
INNER JOIN vbap on vbak~vbeln = vbap~vbeln
where
VBAK~kunnr in kunnr
AND
VBAK~VKORG in VKORG
and vbak~audat in audat
AND vbap~matnr in matnr.
SELECT vbak~vbeln vbak~kunnr vbak~vkorg vbak~audat vbak~netwr vbak~matnr
             into table itab
from vbak
where kunnr in kunnr....
select vbeln matnr
      into table itab2
from vbap
for all entries in itab
where vbap~matnr = itab~matnr....
loop at itab assigning <fs_itab>.
read table itab2 into wa_itab2 with key vbeln = <fs_itab>-vbeln
                                                         matnr = <fs_itab>-matnr.
" your move's to final table
endloop.

Need help with program for Inner join

Hello Experts,
I need to create a list from table sbook containing booking number (sbook-bookid), customer number (sbook-customid), customer name (scustom-name) , customer class (sbook-class) and ticket price (sflight-price). I am new to ABAP and am very confused I tried reading up some examples and came up with the attached program
Attached is my program for inner join
Kindly Help
Thanks Su

Hi Su K
          You May use key fields , Foreign keys for joining , Here
SELECT SBOOK~BOOKID SBOOK~CUSTOMID SBOOK~CLASS
SCUSTOM~ID SCUSTOM~NAME FROM SFILGHT
   INNER JOIN SBOOK ON   SBOOK~CARRID EQ SFILGHT~CARRID
                                          SBOOK~CONNID EQ SFILGHT~CONNID
                                          SBOOK~FLDATE EQ SFILGHT~FLDATE
INNER JOIN SCUSTOM ON SCUSTOM~ID = SBOOK~ID

Unable to create Measures dimension in proper relationshipin Essbase Studio

I am planning to build measure hierarchy in Essbase studio with TBCSample(SQL Server 2005) which is came by default with Essbase Studio installation
I built the hierarchy with parent child relationship.
However the hierarchies is not coming in the proper order
Generally Sales,COGS should come under “Margin ” and it should be under “Profit”
Eg:      Profit
     Margin
          Sales
          COGS
However it is showing differently in “Preview” mode.
Profit
Margin
Margin
Sales
COGS
When I deployed the cube I got the below errors because of the duplicate members
The error file is located on the server at: E:\Hyperion\products\Essbase\EssbaseStudio\Server\.\ess_japihome\data\TBCSampl.TBCSampl_03-29-11_23-16-00.err
\\Record #6 - Member name (Measures) already used
Measures Inventory
\\Record #7 - Member name (Measures) already used
Measures Profit
\\Record #8 - Member name (Measures) already used
Measures Ratios
\\Record #9 - Member name (Margin) already used
Profit Margin
\\Record #14 - Member name (Total Expenses) already used
Total Expenses Marketing
\\Record #15 - Member name (Total Expenses) already used
Total Expenses Misc
\\Record #16 - Member name (Total Expenses) already used
Total Expenses Payroll
Please let me know how to resolve this issue
Database: SQL Server 2005
EPM Version : 11.1.1.3
Thanks,
SatyaB

open the minischema and in the graphic go to your measures table. highlight either the parent or child member and right click. select create join. In the screen that comes up, selet the other column from the same table. It will create the join. You wnat an inner join. You can also click on the member and drag and drop the join line to the child member to create the join

Unable to create a inner join

Similar Messages

Maybe you are looking for