Unable to create a jco destination using remote AS Java system on myjava sy

Dear SAP Gurus,
I had ce 7.1 and nw 2004s based AS java Systems.I want to create a jco destination in my CE 7.1 system using usermapping data of nw 2004s for jco communication.So i created a AS Java system of NW2004s in my CE 7.1 SLD .when i try to create a jco destination using the AS JAVA as Nw2004s system it is not creating .Please help me to solve this issue.
regards,
vanamaSanthosh.

Hi vanamaSanthosh
try this
1. In your CE1 System where u define your JCO destination, Go to C:\WINDOWS\system32\drivers\etc
open hosts file and define the identity of AS System like <IP address> <name of the system>
for example 159.858.2.45 abcd
restart the server and then check.
Best Regards
Satish Kumar

Similar Messages

Unable to create the Jco destination

Hi Experts,
I am facing a strange issue, As part of ESS and MSS i have to create some Jco destinations in the Wedynpro content administrator.I am giving the all the necessary information for the Jco creation when i click on Finish, jco is not getting creted.
And the status is in Red color...
Can any one help me what i am missing???

Hi Anil,
Hope you are doing good.
Is the SLD up and running?
If the issue persists:
1.)Delete all the JCO destinations from Content Admin and then from SLD
2.)Restart the complete cluster once and do a SLD data trigger.
3.)Then recreate all the jco destinations again from content admin. (Important note: using the "New JCO Message Server Destination" button in SLD will create an inconsistent state. Please do not use it.)
let me know how this goes.
Thank you!
Kind Regards,
Hemanth
SAP AGS

Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager

Hi
I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
Any Help regarding this issue will be very appreciated.
Thanks in Advance.....
Abhinav | MCTS-Server Virtualization

Thanks Tim for your response but atleast I should be able to create and configure VMs for high availability.
I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
Please check and let me know if it can be solved. Any help will be really appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization

Error when creating a JCo destination

Dear All,
I am trying to create a JCo destination using the 'Content Administrator' but am getting the following error:
"Please choose another name for the new JCo destination. The defined name 'SLD_PROBE_XYZ' is used in the SLD."
It seems that whatever name I give the JCo destination, a similar error occurs.
I have read a couple of pdf's on JCo destinations but to no avail. Any pointers would be much appreciated...
Kind Regards
Chris Jackson

>Hi,
> "com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed >attempts"
As you can clearly see that logs are stating that user you are entering in JCO destination to connect to backend system has wrong password.
Check the password of the user that you are entering in JCO destination.
Thanks
Sunny

Unable to create the JCO connections in webdypro (JAVA) No SLD Connection

HI All,
In webdynpro i am unable to create standard JCo connections. create Jco connections and Maintain Jco COnnections are disabled. when i click any of the standard content of the Jco connections it displays error message No sld check. But SLD is running fine. I have checked in Visual Admin there also SLD supplier is running fine.
But i am unable to create or maintain the Standard content of the JCo Destinations.
Thank You,
Mahesh C

Hi ,
I am having all admin rights. And also i have checked in Check SLD Connection. It showing the error connection to SLD Could not opened successfully. But SLD is running fine and i have checked in Visual admin SLD datasupplier is running fine.
When i check in the log of the SLD there it is showing
#2852 11/18/2008 18:27:18.265 [SAPEngine_Application_Thread[impl:3]_29] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors.
Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors.
Is that i need to change the CIM content?
I could not able to get clue on this.
Thank You,
Mahesh C

Error when trying to create a JCO Destination

Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-Arne

Hi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir

ERROR WHEN I CREATE A JCo DESTINATIONS

Hi to all
I have the SLD running. I want create two JCo destinatios. I want create a Web Dynpro application with adaptive RFC Model.
But, I login to http:///webdynpro/dispatcher/sap.com/tcwdtools/Explorer
and when I attempt create a JCo destinations, appear the following error:
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:985)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
    ... 45 more
Can someone say me, why occurs this error ? I have reviewed all my configuration, but I haven´t found nothing.
Thank you very much.
Regards
Dario Rodriguez

I think while creating the JCOs you must hav left some field with a NULL value.Try to check out that all the connection properties hav been specified correctly also make sure that the connection pooling has a small range.

Error while creating the JCO destinations

Hi All,
I am getting the following error while creating the JCO destinations.
<b>There are no message servers maintained in the associated SLD. Please contact your system administrator.</b>
Please help me in resolving this
Thanks

http://help.sap.com/saphelp_erp2005vp/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
Creating New Web AS ABAP Technical Systems
/*Reward if helpful
Message was edited by:
Anant
Message was edited by:
Anant

CUP 5.3 (SP9) Error message when creating a JCO Destination

Dear Experts,
When I try to create a new JCo Destination in Web Dynpro Content Administrator, I get the following error message and I cannot create a connection in CUP:
"com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts"
Please give me some advice if you can.
Thanks,
HM

>Hi,
> "com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed >attempts"
As you can clearly see that logs are stating that user you are entering in JCO destination to connect to backend system has wrong password.
Check the password of the user that you are entering in JCO destination.
Thanks
Sunny

SLD Communication between Remote ABAP & JAVA system through WebDispatcher

Hi All,
We are having the listed requirement at one of my Client.
We want to register Remote ABAP system into Remote SLD of JAVA system. Both SAP systems are located in different regions.The SLD is local to the remote JAVA system. The ultimate objective is to create JCO Destinations in Remote JAVA system using the Entries of its Local SLD and to run some WebDynpro Application to access Data from Remote ABAP system.
We have already setup the above mentioned same scenario between Remote ABAP Dev and Remote Poratl DEV systems with the help of their Direct Live IP communciation. The setup is working fine, as both systems are accessing each other using Direct Live IPs in both directions on ports 3200, 3300, 50000....
But in Portal PRD scenario, the Cleint's Enterprise Portal is accessed through SAP Webdispatcher. The User Access Request of PRD Portal is first captured at SAP Webdispatcher and then the requrest is redirected to the J2ee Application Servers based on Load balancing. So in this PRD scenario, how we can establish such SLD communication setup between Remote ABAP and JAVA systems in both directions via SAP WebDispatcher.
One of the option may be to use SAP Gateway of Portal Development, whcih is accessed through Live IP and register Remote ABAP system to Poral PRD system (by maintaining SLD entriy in SLDAPICUST T-code). I don't know weather such communication will work or not ..as it may require SLD Bridge configuration from Portal DEV to Portal PRD... may be... and may be to enable some portal communcaitons on Ports 3300, 50000 (Java Side), 3200, (ABAP side) ...
Or
at SAP Webdispather host (which is accessed first for Portal PRD requests..), the Standalone gateway needs to be setup to establish such SLD communication ?
I am confused abt the final setup of the above mentioned SLD setup. So requesting you to provide possible options/suggestions for the same.
Regards,
Bhavik G. Shroff

Hi,
I would suggest you to install standalone gateway between portal and your PRD system. Register portal host and gateway in the SLD and same enter in RZ70 on your PRD system. As a result both will be able to communicate with each other.
Thanks
Sunny

Wrong JCO destination used at Runtime

hi,
I created a Model using the following JCO Destinations
'WD_RFC_METADATA_DEST_HCM'
When I run the application, it gives me folowing error
Failed to resolve JCO destination name 'WD_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD
Where is it getting this 'WD_RFC_METADATA_DEST' ? though my JCO destination name is 'WD_RFC_METADATA_DEST_HCM'
Thanks !
seventyros

Hi,
Make sure you deploying to the SAME server where you have configured and maintained the JCo destination.
Also check the server name and port when you are running your WD application and server name and port you are using for WD content administration.
Also What is the version of your NWDS ?
In NWDS 7.1, we would require a totally different way to maintain the JCo destinations comparing to the past.
We now have to maintain the JCo destinations not in the JCo Connection Administrator, but in the NWA under u201CConfiguration Managementu201D - > Security -> Destinations.
This [doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09527da-39a7-2b10-9f99-c6a007e516a5?overridelayout=true] explains the same...
Regards,
Vijay.

Unable to create a pdf file using the print routine

Hey all,
Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver....
I have vista and cs3... Any thoughts?
Thanks,
Murph
[email address deleted by host]

If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

[B2B/B2C] Create a JCO Connection using XCM Framework

Hello colleagues,
I need to create a Java class that create and initializate the XCM framework.
I need to create a JCO Connector to a custom Function Module in my Backend, by
using RFC XCM Configuration.
Any kind of Idea? I see this example from SAP http://help.sap.com/saphelp_nw04/helpdata/en/d2/561106b8b3bc449f890cddfdc8d3e2/content.htm , but I don't want to maintain
myself rfc logon configuration.
I see that I need to configure a BO on ISA framework by modify backend-object.xml, but I don't now if
it's enougth
Thanks in advance
Nicola

Hi -
But I have a question,
It isn.t possible to read the jco information and add it manually to the JCO Connection class?
Does this mean to provide the JCO connectivity details in your JCO class? Try the below code which is not a best practice to my knowledge.
   JCO.Client mConnection;
   JCO.Repository mRepository;
        try {
        // Change the logon information to your own system/user
        mConnection =   JCO.createClient("001", // SAP client
                                                              "<userid>", // userid
                                                                "****", // password
                                                                  null, // language
                                                                 "<hostname>", // application server host name
                                                                 "00"); // system number
        mConnection.connect();
        mRepository = new JCO.Repository("ARAsoft", mConnection);
     catch (Exception ex) {
One question, why do you want to do this if the the JCO - XCm is handling this in a standard way , and what are you trying to do?
Raj-

How to Maintain Jco Destinations ( using ARFC2 )

Hi Friends
I call ARFC2 setting WD_MODELDATA_DEST and WD_RFC_METADATA_DEST.
... then get error message.
com.sap.conn.jco.JCoException: (106) JCO_ERROR_RESOURCE: Destination WD_RFC_METADATA_DEST does not exist
    at com.sap.conn.jco.rt.DefaultDestinationManager.update(DefaultDestinationManager.java:195)
    at com.sap.conn.jco.rt.DefaultDestinationManager.searchDestination(DefaultDestinationManager.java:344)
    at com.sap.conn.jco.rt.DefaultDestinationManager.getDestinationInstance(DefaultDestinationManager.java:96)
    at com.sap.conn.jco.JCoDestinationManager.getDestination(JCoDestinationManager.java:61)
    at com.sap.tc.cm.arfc2.metadata.RFMParser.<init>(RFMParser.java:78)
    ... 74 more
I wnat to Maintain the demo01's JCo Destinations, but the page is null.
Where can I create WD_MODELDATA_DEST、WD_RFC_METADATA_DEST.
thx.

Hi BenChen,
You need to create JCO Destination in the SAP Portal >> Content Administration >> Web dynpro >> Maintain Jco Destinations.
If "Create" button not active,then you need to check SLD running or not and SLD data supplier.
Please refer to below documents will helps
[System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
[JCO Destination Errors|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0019b1a-775f-2910-beb8-d81f27d0d8d0?quicklink=index&overridelayout=true]
[How to Configure the JCo Destination Settings|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf]
Hope it will helps
Regards
Arun Jaiswal

CAF service: import web services using Remote Location / File System

Hallo Experts
I use the NetWeaver DevStudio 7.1 SP5.
I have a CAF project and in this project I want to import one WebService as external service. I have chosen the option "Remote location/ File System" in the import web service wizard, then I enter the URL in the following step. But at the end of wizard I got the error "WSDL could not be downloaded because Server returned HTTP response code 403 for URL". The web service I've deployed and tested on the server. It runs well. Any Hints?
Thanks in advance
Kind Regards
Ping

Hallo
I found out: if I enter one URL "http://xxxx.xx.ch:51000/ExampleService/ExampleBean?wsdl&mode=ws_policy". Afterwards I got the error "http://xxxx.xx.ch:51000/ExampleService/ExampleBean?wsdlmode=ws_policy". & ist not correct displayed. Is this the problem that I got 403 Error... It is a bug in SP5
Thanks if you can tell me some work-arround.
Ping

Unable to create a jco destination using remote AS Java system on myjava sy

Similar Messages

Maybe you are looking for