Unable to create a new sheet in the excel

Hi,
We are using BO Dashboards 4.1 SP2 with MS Office 2013 32bit. Problem is we are not able to add extra sheets to the work book. The option to insert additional sheet is greyed out. Is there a solution??
Thanks
Anil

Hi Anil
Which support pack are you currently working SP1 or SP2? Also, you need to check if the installed version is 32 bit.
Please refer below link for any cross check.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
Regards
Kishore Balachandran

Similar Messages

  • Unable to create a new listener from the EM Console

    When I try to create a new listener from Enterprise Manager Console, it displays an error message: Error in getting data for creating new listener. Check if the listener.ora location "/u01/app/oracle/product/10.2.0/db_1/network/admin" is a valid one. It is absolutely a valid ORACLE_HOME, in fact, I can setup TNS Connect Alias and Profiles from here, but the listener has became a pain in the neck.
    I know I can use the java netmgr or netca or even vi to set it up; however, it is a must that it has to be done through Enterprise Manager Console (show EM manageability issues).
    Thanks for your feedback

    Im using EM, not GC. I did not try to create the listener form EM, as I always created them from Net Manager. After creating them, I used to be able to see them listed in EM, following these steps --> click on the target listener on the homepage --> click on Net Services Administration --> scrolling the scrollbox to listeners and click go.
    One day I tried to scroll to "local naming" instead of "listeners", clicked "go" and tried to create a new one (actually cancelled the operation before saving the changes). Since that moment I see the error when trying to see the list of listener in EM.
    Enrico

  • I am unable to create a new entry on the calendar menu, in other words there is no (+) at the bottom right corner of the calendar menu, please help?

    I bought a new iPad 2 and I was trying to create entries on the calendar application but I cannot because there is no plus sign(+) at the bottom right corner of the calendar application. Please assist?

    Try going into Settings > iCloud and toggle Calendars 'off' and 'on' and see if you then get the '+'

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

    I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

    Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
    Check Settings > General > Restrictions

  • I am unable to create a new email message when I connect to the internet through google

    I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.

    Try this. Settings>Safari>Block Pop-Ups>Off.
    I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server.

  • Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Por

    Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port-Printer. The Adobe PDF Printer may be unavailable. I'm using the original CD to set up

    And on what system? Acrobat 7 is not compatible with Windows 7, if that's what you are using. You need to upgrade then.
    Mylenium

  • Unable to Create a new Analysis in OBIEE 11g

    Hi All,
    I have installed OBIEE 11.1.1.6.0 in Windows 8 .All the links in presentations services are working properly except New icon. I am unable to create a new report , dashboard,filter or prompt .I can see my Subject area in Manage privileges but it is not opening all the links in Manage links are not working .Weblogic has following roles Administrators ,BI Author, Bi Administrator ,Bi consumer but still unable to create a new report.
    Any inputs are appreciated.
    Thanks

    Try to Open the catalog offline using Catalog Manager and give permissions as in http://www.cool-bi.com/Issues/CatalogPermissions.php
    Try to do it on root folder.

  • Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

    I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
    These are the steps I followed
    I selected all the options since I didn't have the drivers or an install disk
    it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
    I selected a partition size - I gave windows roughly 100GB
    and I let it install
    Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
    "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
    WHAT DO I DO?

    I had to read the apple instructions several times before they started to make sense.  I burned my iso onto a DVD and had the required USB for support software.  Are you trying to use the single USB method?
    This article has a lot of info on the single usb method

  • Boot Camp - Setup was unable to create a new system partition....from Windows install

    Hi folks.  So I ran the boot camp wizard and made a USB install key for windows from that.  I boot to it and everything works until I get to the install.  I format the Boot Camp partition as indicated in the walkthrough and then I get "Setup was unable to create a new system partition or locate an existing system partition.  See the Setup log files for more information." from the Windows installer.  What do I do?   Thanks.              

    just to add to the mix. . . i just got a new macbook retina.
    Originally used a USB flash drive. Hit the same barrier described here.
    Spent a few hours with drive unplugging / replugging silliness. No progress. Went back into OSX to attempt using an external DVD drive. There is no option for that in Bootcamp assistant now - must use USB.
    Grabbed a different USB stick and started again. This time I used the other USB port on the macbook (the one on the left). Everything worked fine this time!?
    You still have to go into "advanced options" and hit "format" when you get to the partition screen.
    Moral of the story: different stick, different port. Sounds random. If that doesn't work, try changing your socks and putting on a hat.
    Good luck!

  • Unable to create a new company

    Hi All
    I have installed sap business one 8.8
    But i am unable to create a new company. new button only is missing
    Regards
    Farheen

    HI
    The Installation has not been done correctly  also  you  have to install all the Updated version of .net frameworks.
    I got this error & is solved by installing frameworks.
    Regards
    Raman

  • Unable to create a new Message  Layout : 500 attempts failed.

    I am getting this error " Unable to create a new Message Layout : 500 attempts failed." when I am trying to add my custom region to seeded Message Layout.

    Is that all the error message you are getting or java error stack is also there? It looks like a custom message as I couldn't find it in fnd messages. DO you have any other custom code on this page or is this a custom page?
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Unable to create a new calendar

    I'm unable to create a new calendar in iCal. If I open the File menu, and hover on "New Calendar", it doesn't display me any options. Nothing happens! See screenshot below:
    Anyone have any ideas? I mainly use Google calendars, but I'd like to add a local calendar on my mac.
    Regards,
    Joost

    Fix:
    Open iCal preferences, disable all Google calendar accounts. Now I can create a new calendar "on my mac". After creating it I can turn the Google calendars back on and the local calender will stay.

  • Windows 7 Setup was unable to create a new system partition

    I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed.  I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
    a new system partition blah blah blah.  I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
    What I eventually found to be the solution was to go into the BIOS and change a setting.  Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
     After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly.  I think that's why other people had success after removing all external hard drives.  After a
    couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
    Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
    Andy Mykrantz

    Hi.
    Thanks for sharing the information here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Acer aspire 5733 windows 7 intel core 13 inside, setupwas unable to create a new system partition orlocate an .......

    i woke up today to see my laptop asking for  a current password i entered 
    then it was asking
    please input password for st9500325as
    and nothing seems to be working
    i tried to reboot the system and then the error message displayed in the title comes when i click next screen asking fro where do you want to install windows, i havent connected anything on the laptop and just
    1 disc0 unallocated space  465.8gb 
    and i cant partition it also
    i clicked on drive option and clicked on new( thets the only one i can click from the options) and it waited for some time as it is trying to do something and telling me failed to create new partition, what can i do. [laese explain in  astep bt step
    procedure,
    i am not a genius on laptops or computer

    Hi,
    Quote: setup was unable to create a new system partition or locate an existing system partition.
    It can be caused by corrupt partition table.
    Boot from Windows installation media, press Shift + F10 at setup screen, and run chkdsk command to fix drive error.
    http://technet.microsoft.com/en-us/magazine/dd637756.aspx
    Also, please remmember to mark your system partition as active using diskpart command, if you do not have a system reserved partition.
    http://www.sevenforums.com/tutorials/71432-partition-mark-active.html
    NOTE This response contains a reference to a third
    party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Andy Altmann
    TechNet Community Support

Maybe you are looking for