Unable to create a "remote" destination in Compressor 4.0.3

Creating a remote destination works for one iMac but not the other, and I'm wondering why...
We are able to create a remote destination on one iMac with Compressor 4.0.2  When you click on the + tab a small drop box appears with Local... and Remote.. and when we select remote we can create a destination to our Leightronix system's harddrive (for our digital playback system).
However later on we downloaded Compressor 4.0.3 onto another iMac, but this time the + tab does not have an arrow and does not show the Local... and Remote... when you click on it. Why not?? Did .3 eliminate that drop box?  Instead it opens a window with just the Local options as if you are saving a file to your computer.
Any help would be GREATLY appreciated.  This is frustrating.

Did you send feedback through Compressor? I'm trying to do the same thing and it's frustrating that this feature seems to have disappeared. I sent feedback and hopefully I'll get a response. The more people they receive feedback from the more likely they will listen.

Similar Messages

  • Unable to create a jco destination using remote AS Java system on myjava sy

    Dear SAP Gurus,
                  I had ce 7.1 and nw 2004s based AS java Systems.I want to create a jco destination in my CE 7.1 system using usermapping data of  nw 2004s for jco communication.So i created a AS Java  system of NW2004s in my CE 7.1 SLD .when i try to create a jco destination using the AS JAVA as Nw2004s system it is not creating .Please help me to solve this issue.
    regards,
    vanamaSanthosh.

    Hi vanamaSanthosh
    try this
    1. In your CE1 System where u define your JCO destination, Go to C:\WINDOWS\system32\drivers\etc
    open hosts file and define the  identity of AS System like <IP address> <name of the system>
    for example 159.858.2.45  abcd
    restart the server and then check.
    Best Regards
    Satish Kumar

  • Unable to create the Jco destination

    Hi Experts,
    I am facing a strange issue, As part of ESS and MSS i have to create some Jco destinations in the Wedynpro content administrator.I am giving the all the necessary information for the Jco creation when i click on Finish, jco is not getting creted.
    And the status is in Red color...
    Can any one help me what i am missing???

    Hi Anil,
    Hope you are doing good.
    Is the SLD up and running?
    If the issue persists:
    1.)Delete all the JCO destinations from Content Admin and then from SLD
    2.)Restart the complete cluster once and do a SLD data trigger.
    3.)Then recreate all the jco destinations again from content admin. (Important note: using the "New JCO Message Server Destination" button in SLD will create an inconsistent state. Please do not use it.)
    let me know how this goes.
    Thank you!
    Kind Regards,
    Hemanth
    SAP AGS

  • Massive problem with remote destination

    hello all,
    we have massive problems with our remote destinations.
    after i create the remote destination profile and added the line, i create the remote destination for my mobile phone. 
    all ok so. but if im associate my mobile phone with the line by choosing Line Association i´m no able to reach many numbers in my company anymore.
    there is no ringing tone. there is nothing and after 20-30 seconds i got an busy tone.
    if i delete the Line Association i can reach the number normally.
    Perhaps you got any idea . I dont got any anymore

    finally we found the problem
    it was at the cucm service parameters.
    we changed " machting caller id with remote destination " to "partial match" after that all is working fine.

  • CUCM 9.1 Bulk Insert Remote Destinations with a +

    If I try a bulk insert of remote destinations that begin with a + sign (eg +15552125555) I get the following error:
    "A character to numeric conversion process failed"
    If i create the remote destination manually it works fine so I know that the string can contain a + sign. and If I export the existing remote destinations the format is identical to my csv. Is there anything that needs to be done for it to correctly handle the + character?

    CSV file attached. I've removed the identifyig information but this is what i exported from the call manager. If I try to import it back in it throws that error.

  • I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or

    I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.  File activity incomplete. 1 file(s) or folder(s) were not completed.  Files with errors: 1 /html

    Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
    Mylenium

  • Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager

    Hi
    I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
    I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
    I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
    The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
    Any Help regarding this issue will be very appreciated.
    Thanks in Advance.....
    Abhinav | MCTS-Server Virtualization

    Thanks Tim for your response but atleast I should be able to create and configure VMs for high availability. 
    I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
    Please check and let me know if it can be solved. Any help will be really appreciated.
    Thanks in advance.
    Abhinav | MCTS-Server Virtualization

  • Error OAB-90061 unable to create connection to the remote server

    hello
    i have a problem with introspection: i want to introspect wls.
    i installed wls on a virtual machine. zip archive, no installer.
    i also installed ovab on my local virtual machine.
    start ovab, conect to serverpool: ok. now i want to start a introspection. but i got only an error:
    INTROSPECTION STARTED for: juriwls
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Creating local assemblybuilder.zip.
    Local assemblybuilder.zip created.
    Copying assemblybuilder.zip to remote machine.
    Copy at 10%
    Copy at 20%
    Copy at 30%
    Copy at 40%
    Copy at 50%
    Copy at 60%
    Copy at 70%
    Copy at 80%
    Copy at 90%
    Copy at 100%
    Copy of assemblybuilder.zip complete.
    Copying support scripts
    Copy of support scripts complete
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Introspection failed
    Error: Error initializing the remote connection.
    Caused by: OAB-90061: Unable to create connection to remote server
    Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
    Action:
    Double click on the failed node for detail
    ok may the interfaces are down: checked, ok. static ip
    tied to ping each other: no problem.
    nslookup: everything perfect.
    firewall off on each machine!
    wls is started and in runnig mode!
    variables set in .bashrc
    so i dont know what to do. anybody else?
    thanks in advance

    thanks for help
    in cli i entered: system-config-securitylevel-tui quiet port=http --port=ssh
    well done introspection starts ... but after a while another error occurs
    INTROSPECTION STARTED for: juri
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Introspection failed
    Error: Error initializing the remote connection.
    Caused by: OAB-90061: Unable to create connection to remote server
    Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
    Action:
    Double click on the failed node for details.
    INTROSPECTION STARTED for: juri
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Remote AssemblyBuilder is started and connected.
    - START SUBMIT...
    - END SUBMIT...
    onProgress<juri>: started WLS dehydration (expect delays during domain template creation)
    onProgress<juri>: started processing WLS configuration
    onProgress<juri>: creating appliances for the servers in the domain
    onProgress<juri>: Processor: 0 completed
    onProgress<juri>: capturing application deployment plans
    onProgress<juri>: determining the list of application deployments
    onProgress<juri>: building target map
    onProgress<juri>: Processor: 1 completed
    onProgress<juri>: capturing cluster configuration
    onProgress<juri>: building list of all clusters
    onProgress<juri>: building cluster sub-assemblies
    onProgress<juri>: Processor: 2 completed
    onProgress<juri>: capturing Coherence Java option configuration
    onProgress<juri>: processing setDomainEnv.sh
    onProgress<juri>: processing config.xml
    onProgress<juri>: adding rehydration scripts
    onProgress<juri>: Processor: 3 completed
    onProgress<juri>: creating package definition for domain
    onProgress<juri>: Processor: 4 completed
    onProgress<juri>: processing inputs/outputs
    onProgress<juri>: Processor: 5 completed
    onProgress<juri>: capturing data source configuration
    onProgress<juri>: Processor: 6 completed
    onProgress<juri>: start jms message bridge processing
    onProgress<juri>: Processor: 7 completed
    onProgress<juri>: start ldap processing
    onProgress<juri>: Processor: 8 completed
    onProgress<juri>: start listen address processing
    onProgress<juri>: Processor: 9 completed
    onProgress<juri>: capturing node manager configuration
    onProgress<juri>: Processor: 10 completed
    onProgress<juri>: capturing oracle home
    onProgress<juri>: Processor: 11 completed
    onProgress<juri>: validating truststore configuration
    onProgress<juri>: server truststore configuration is valid
    onProgress<juri>: Processor: 12 completed
    onProgress<juri>: processing foreign jms connections
    onProgress<juri>: Processor: 13 completed
    onProgress<juri>: setting resource requirements
    onProgress<juri>: Processor: 14 completed
    onProgress<juri>: Processor: 15 completed
    onProgress<juri>: creating appliance connections
    onProgress<juri>: no managed servers found, nothing to do
    onProgress<juri>: Processor: 16 completed
    onProgress<juri>: capturing BAM configuration
    onProgress<juri>: processing BAM managed server specific configuration files
    onProgress<juri>: Processor: 17 completed
    onProgress<juri>: authenticating admin credentials
    onProgress<juri>: admin credentials authenticated
    onProgress<juri>: Processor: 18 completed
    onProgress<juri>: exporting security configuration
    onProgress<juri>: Processor: 19 completed
    onProgress<juri>: capturing file store configuration
    onProgress<juri>: Processor: 20 completed
    onProgress<juri>: adding ready metric data to appliance
    onProgress<juri>: Processor: 21 completed
    onProgress<juri>: adding contentdata to appliances+
    onProgress<juri>: creating common resources
    onProgress<juri>: adding admin server resources to appliance AdminServer
    onProgress<juri>: adding appliance resources
    onProgress<juri>: Processor: 22 completed
    INTROSPECTION DONE for: juri
    Introspection failed
    Error: OAB-50002: Failed to create assembly for WLS domain.
    Caused by: OAB-50042: Domain template creation failed.
    Action: Check /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18246.out and /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18247.log for details. These log files will be on the remote system if this is a remote introspection. This problem must be resolved before introspection can succeed.
    ok lets check these log files: cat on these logs.
    these logs are EMPTY!!!
    i dont know what to do now ...

  • Unable to create remote app

    Hi,
    I am unable to create remote app, every time I tried to create remote app, I am getting the following error:
    Context:
    32ae8534-a25f-42a1-a1f6-d2bea2ff9305
    Not sure what does that mean and how to resolve this.

    Hi,
    Would you please tell us that which step went wrong when you tried to publish remote app?
    Here is a blog below for your reference:
    Windows Apps in the Cloud: Introducing Microsoft Azure RemoteApp
    http://blogs.msdn.com/b/rds/archive/2014/05/12/windows-apps-in-the-cloud-introducing-microsoft-azure-remoteapp.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Unable to create remote folder

    When I attempt to go to the data bindings on an ASP form I
    have, I get the following error:
    Unable to create remote folder 550 _mmdbscripts: Access
    Denied
    The form works fine, but I can add any new fields to the form
    because I get this error when I attempt to update the field list
    under server behaviors.
    Any suggestions?

    Does your FTP hang on all sites? Or this this the only one?
    How many sites
    do you have? Does it hang with all folders or only these
    specific ones?
    What happens if you create a new folder in the site and try
    to upload that?
    Such curious FTP problems in DW are almost ALWAYS the result
    of an
    interference from your local firewall - are you running one?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "hfeurstein" <[email protected]> wrote in
    message
    news:fe7uu9$34r$[email protected]..
    >I am so glad you are out there - this is the most
    responsive forum I have
    >ever
    > experienced:)
    >
    > Essentially I am trying to upload my site from my hard
    disk to the ftp
    > server
    > using DW.
    >
    > Each time I make an attempt, it will copy a few files
    and then I will get
    > the
    > error message as described in my initial posting. First
    I thought that it
    > had
    > to do with my file and I deleted an entire folder from
    my hard disk. Upon
    > my
    > next attempt to upload, the same error message occurred
    with a different
    > folder. And each time I attempt to upload the same thing
    will happen with
    > "a"
    > folder...
    >
    > In the last two hours while having this correspondence,
    I have switched to
    > FireFTP - a free FTP by Mozilla and the entire site is
    uploading swiftly
    > and
    > without any error messages - I am only half way through
    but the three
    > folders
    > that have given me errors in DW have already been
    uploaded successfully.
    >
    >
    >

  • FTP as remote destination not uploading - why?

    Problem:
    I can't get the Remote FTP destination to work in Compressor 3.1 - anyone able to help?
    Details...
    If I submit a job with a FTP destination, the job creates the compressed file but does not upload to the FTP location. Each and every time when I view the Batch Monitor it shows 'error' and tells me...
    Status: Failed - Failed to upload to ftp://users:••••••@mydomain.com/home/mydomain/public_html/downloads/-29-10-2007. m4v, encoded file is in: /var/tmp/1E668CBD-50D2-4019-AAD1-1CB58C3CE0A7-local--29-10-2007.m4v
    I have tried entering the 'standard' path (usual root address) for the remote destination e.g. /downloads and also the full server path e.g. /home/mydomain/public_html/downloads and it doesn't work with either.
    I use the same settings in an FTP program and it works fine. Not with Compressor. *Anyone know why?*

    Yes, I have checked it. Its ok.
    And if I run this program in foreground it is working fine and posting a file in the FTP remote server.
    I would like to explain the logic which I have used here.
    I pick the data from my program logic and place the data in the application server.
    Now I will pick this file and send it to the remote FTP server.
    This process is working when i do it in foreground.
    But failing in background job.
    My file till application server is ok.
    Regards
    Sunil

  • Forwared calls using Remote Destination is not getting captured in CDR

    Hi
    Our senario is as below,
    A CUG call is made from an extention ( eg 6992 ) to another extention ( eg 6102 ). In 6102 the call is forwared to a mobile number of the user when the user is not avialable at the seat. To make this possible we have created remote destination number and remote destination profile. The call forwarding is happening and the senario is working fine. The issue is, the destination number ( ie.mobile number ) is not getting displayed in the Call Detailed Report.The report was taken and checked on extention basis and on gateway basis, but the destination number was not displayed in CDR. In the CDR both the CUG extentions are displayed, but cannot find the PSTN number which is forwared.
    I have observed the below options in CUCM 8 Service Parameters, but not available on CUCM 7. The options are attached in a doc. Is this a limitation on CUCM 7 or is there options that we need to enable for availing this facility.Please guide me on this case.

    Hi,
    you must set the following Parameter in the "Service Parameter" List to "true"
    "Show Line Group Member DN in finalCalledPartyNumber CDR field"
    Regards Ralf

  • Disk Utility "Unable to create" Disk Image "error -39"

    I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
    The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
    When I do the same on my computer, the process completes fine.
    What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
    PowerBook G4   Mac OS X (10.4.5)  

    I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
    This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
    Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
    In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
    I'll try to confirm all of this in the next few days and report my findings.

  • Disk Utility: Unable to create "ImageName.dmg" error -39

    Ladies,
    Gentlemen,
    I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
    The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
    The iMac is running OS X 10.4.11.
    I proceed as follows:
    Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
    Menu option: File, New, Disk Image from disk0s3 (Mac HD)
    The target disk is Porche_LaCie FireWire drive.
    After +/- 2 hours I end up with the above message.
    The hard drive has following characteristics:
    Name : Mac HD
    Type : Volume
    Disk Identifier : disk0s3
    Mount Point : /
    File System : Mac OS Extended (Journaled)
    Connection Bus : ATA
    Partition Type : Apple_HFS
    Device Tree : sata/k2-sata@0/@0:3
    Writable : Yes
    Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
    Capacity : 148,9 GB (159.907.627.008 Bytes)
    Free Space : 96,9 GB (103.996.362.752 Bytes)
    Used : 52,1 GB (55.911.264.256 Bytes)
    Number of Files : 419.419
    Number of Folders : 104.321
    Owners Enabled : Yes
    Can Turn Owners Off : Yes
    Can Repair Permissions : Yes
    Can Be Verified : Yes
    Can Be Repaired : Yes
    Can Be Formatted : Yes
    Bootable : Yes
    Supports Journaling : Yes
    Journaled : Yes
    S.M.A.R.T. Status : Verified
    Disk Number : 0
    Partition Number : 3
    The target drive characteristics:
    Name : Porche_LaCie
    Type : Volume
    Disk Identifier : disk1s1
    Mount Point : /Volumes/Porche_LaCie
    File System : Mac OS Extended (Case-sensitive, Journaled)
    Connection Bus : FireWire
    Partition Type : Apple_HFS
    Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
    Writable : Yes
    Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
    Capacity : 232,9 GB (250.056.705.024 Bytes)
    Free Space : 160,8 GB (172.646.076.416 Bytes)
    Used : 72,1 GB (77.410.627.584 Bytes)
    Number of Files : 15
    Number of Folders : 4
    Owners Enabled : No
    Can Turn Owners Off : Yes
    Can Be Formatted : Yes
    Bootable : Yes
    Supports Journaling : Yes
    Journaled : Yes
    S.M.A.R.T. Status : Not Supported
    Disk Number : 1
    Partition Number : 1
    The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
    So what is going wrong?
    I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
    I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
    Can any one help?

    If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    You can also do the same using other backup utilities that can create bootable backups:
    Backup Software Recommendations
    My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Donationware)
    6. SuperDuper! (Commercial)
    7. Intego Personal Backup (Commercial)
    8. Data Backup (Commercial)
    Also read How to Back Up and Restore Your Files.

  • "Unable to create volume" error when exporting

    Exporting photos from iPhoto gives me the "unable to create Volume" error. iPhoto and Mountain Lion are the latest versions, and most recent updates. Library of 30,000 images is currently on an NAS. Destination drive is formatted Mac OSX Extended (Journaled, Encrypted).
    Library has already been rebuilt. No change.
    PNGs have been deleted from library. No change.
    Tried batch re-titling every image in the library library, and exporting so that exported files were named according to title, followed by a number--thus no two files would have the same name. No change.
    Any suggestions?

    Library of 30,000 images is currently on an NAS.
    Likely cause right there.
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?

Maybe you are looking for