Unable to create a rule that includes "dimming" setting for lights

Just a quick head's up to the team who is monitoring the forums to correct issues with the new portal: I was unsuccessful with creating a new rule to turn on a light to a specific dimming setting. For example: "I want to create a rule for Living Room Light to turn on at 50% when Front Door is open." I am able to move the slider bar to select a 50% dimmer setting, but the rule still turns the light on to 100%. Going in to edit the rule, it appears that it saved a 100% dimmer setting. I've tried creating the rule on two different Windows 7 machines, using both Internet Explorer 11 and Chrome. I reverted to the original version of the portal, and creating the dimming rule worked fine. Thanks!

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Is there a way to create a rule that sends and Auto Response for a shared mailbox?

I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate

Hi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

How do I create a rule that only applies to one mailbox?

How do I create a rule that only applies to one mailbox? For example deleting the messages in the box after 10 days.

You don't. Rules are applied only to new incoming messages, or manually to the selected messages. They cannot be used to delete messages after an amount of time. You could create an AppleScript or Automator action that would do that and then use a recurring event in iCal to run that script.

Unable to create Picking Rule

Hi Gurus,
I am unable to create picking rule in N->Inv->Setup->Rules->Picking using this navigation.
I have created rule and selected required parameters in the screen, click on save, getting message as "1 transaction completed, saved", If i query same name in Inventory picking rule form, unable to locate the same.
Please let me know where I miss the setups, profile option for seeing created picking rules.
Thanks
AK

Just Enable it in the header, goto tools and generate the corresponding package.
If you are in R12+, then you will also need to associate it with an organization by clicking on assign button.
Thanks,
Hrishi

Outline path to create an outline that includes the rounded edge?

In illustrator CS6 I have a line with a rounded endpoints. When I try to OUtLINE PATH - it will clip off the rounded edge -- as if I'm asking AI to outline a path with a non-rounded edge. How can I get outline path to create an outline that includes the rounded edge? Many thanks!

Karen,
It sounds like something that may require something from this list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Unable to find a WSDL that has a definition for service

Dear all
I have a very simple composite applicationexposing a web service. When I deploy the application I get:
There was an error deploying the composite on soa_server1: Deployment Failed: Unable to find a WSDL that has a definition for service {http://soa/sf/login}bpelprocess1_client_ep and port loginPort_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.
However the build process shows no errors. The entire application was built using Jdeveloper 11.1.1.5 using a pre-constructed WSDL. The SOA suite is 11.1.1.5
Any pointers will be really appreciated.
Thanks
The composite is this:
<?xml version="1.0" encoding="UTF-8" ?>

<composite name="SOA2" revision="1.0" label="2013-02-28_14-25-14_553"
mode="active" state="on" xmlns="http://xmlns.oracle.com/sca/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
xmlns:ui="http://xmlns.oracle.com/soa/designer/">
<import namespace="http://soa/sf/login" location="loginToSFDC.wsdl"
importType="wsdl"/>
<service name="bpelprocess1_client_ep" ui:wsdlLocation="loginToSFDC.wsdl">
<interface.wsdl interface="http://soa/sf/login#wsdl.interface(loginPort)"/>
<binding.ws port="http://soa/sf/login#wsdl.endpoint(bpelprocess1_client_ep/loginPort_pt)"/>
</service>
<component name="BPELProcess1" version="2.0">
<implementation.bpel src="BPELProcess1.bpel"/>
<property name="bpel.config.transaction" type="xs:string" many="false">required</property>
</component>
<wire>
<source.uri>bpelprocess1_client_ep</source.uri>
<target.uri>BPELProcess1/bpelprocess1_client</target.uri>
</wire>
</composite>
The WSDL used to generate the BPEL is:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<definitions
targetNamespace="http://soa/sf/login"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns1="http://soa/sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:typ="urn:partner.soap.sforce.com"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<types>
<xsd:schema targetNamespace="http://uk.gov.fca.sf/login" elementFormDefault="qualified" xmlns:tns1="http://uk.gov.fca.sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com" xmlns:typ="urn:partner.soap.sforce.com"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="urn:partner.soap.sforce.com" schemaLocation="xsd/partner_types.xsd"/>
<xsd:import namespace="urn:fault.partner.soap.sforce.com" schemaLocation="xsd/partner_faults.xsd"/>
<xsd:import namespace="urn:sobject.partner.soap.sforce.com" schemaLocation="xsd/partner_objects.xsd"/>
</xsd:schema>
</types>
<message name="loginInMessage">
<part name="loginIn" element="typ:login"/>
<part name="LoginScopeHeaderIn" element="typ:LoginScopeHeader"/>
<part name="CallOptionsIn" element="typ:CallOptions"/>
</message>
<message name="loginOutMessage">
<part name="return" element="typ:loginResponse"/>
</message>
<portType name="loginPort">
<operation name="loginOp">
<input message="tns1:loginInMessage"/>
<output message="tns1:loginOutMessage"/>
</operation>
</portType>
<binding name="loginPortSOAP11Binding" type="tns1:loginPort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap:operation style="document" soapAction="http://soa:8101/login/loginOp"/>
<input>
<soap:body use="literal" parts="in"/>
</input>
<output>
<soap:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<binding name="loginPortSOAP12Binding" type="tns1:loginPort">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap12:operation style="document" soapAction="http://uk.gov.fca.sf:7101/login/loginOp" soapActionRequired="false"/>
<input>
<soap12:body use="literal" parts="in"/>
</input>
<output>
<soap12:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<service name="loginSrvc">
<port name="login_port_11" binding="tns1:loginPortSOAP11Binding">
</port>
<port name="login_port_12" binding="tns1:loginPortSOAP12Binding">
</port>
</service>
<partnerLinkType name="ProviderRole"
xmlns="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<role name="Role1">
<portType name="tns1:loginPort"/>
</role>
</partnerLinkType>
</definitions>

Hi,
I don't see a loginPort_pt port in the wsdl, but it is referenced by the composite...
There's only ports login_port_11 and login_port_12 defined...
Cheers,
Vlad

I get a message upon launching iTunes that the registry setting for burning are missing.

I get a message upon launching iTunes that the registry setting for burning CDs and DVDs are missing. I uninstalled and reinstalled iTunes. I didn't touch the registry. iTnes is fine except, of course, I cannot burn songs to CD.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Unable to save a report that includes a datasource of "Microsoft SQL azure" type

I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to create the Rule Index (SEM_APIS.CREATE_RULES_INDEX) getting error

Hi,
I am trying to create the Rule Index with the below script its giving the temp table space error.
The number of records in that specific table is 17473708 (17+ M) and the available temp space is 120GB.
Execute SEM_APIS.CREATE_RULEBASE('ecc_md_rb')
--Insert to mdsys.semr_ecc_md_rb Values(.............)
BEGIN
SEM_APIS.CREATE_RULES_INDEX(
'ecc_rule_indx',
SEM_Models('FOUNDATION'),
SEM_Rulebases('RDFS','ecc_dm_rb'));
END;
Create rule index statement is running more than 8hrs and i tried with the sem_apis.create_entailment its also giving the same Temp table space error.
Please find the below error details
BEGIN sem_apis.create_entailment('ecc_rule_inx', sem_models('FOUNDATION'), sem_rulebases('OWLPRIME','ecc_dm_rb'),SEM_APIS.REACH_CLOSURE,'RDFS2-, RDFS3-, RDFS4a-, RDFS4b-, RDFS5-, RDFS6-, RDFS7-, RDFS8-, RDFS9-, RDFS10-, RDFS11-, RDFS12-, RDFS13-','USER_RULES=T'); END;
Error at line 1
ORA-29532: Java call terminated by uncaught Java exception: oracle.jdbc.driver.OracleSQLException: ORA-01652: unable to extend temp segment by 64 in tablespace TEMP
ORA-06512: at "MDSYS.SDO_SEM_INFERENCE";, line 4866
ORA-06512: at "MDSYS.RDF_APIS";, line 16
ORA-06512: at line 1
Please Help me to create rule index.
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
Please use the create_entailment API.
As far as temp tablespace goes, please create a bigfile temp tablespace. You can follow Slide #36 of the
following document.
http://download.oracle.com/otndocs/tech/semantic_web/pdf/2010_ora_semtech_wkshp.pdf
Thanks,
Zhe Wu

Need help with adding form fields to PDF created in InDesign that includes links

I created a collateral piece in InDesignCC that includes hyperlinks and bookmarks - I then used LiveCycle to add an image field and text field to the front cover so our sales folks can customize it before use - the sales people with Reader can't save it without the hyperlinks and bookmarks being lost. Anyone have an option on how to fix that?

No. Not at all. I feel like I have clicked EVERYTHING. Lol. But obviously I have missed something.

Can I create a PDF that includes photos using Adobe Reader?

Is it possible to create a PDF document that includes photographs using only Adobe Reader?
Or do you have to pay yet more for Acrobat?

Rachel, although Word is not specifically designed for the job you describe, it can be used for it. Once you have completed your document, you can export it to a PDF file directly from Word (File > Save as > PDF). I would suggest trying first with a single page containing text and photographs like those you'll be eventually using. If results are not as good as you would like, you can explore other methods, such as using a proper design program to produce your originals. And, whatever method you use, don't forget to keep the original files along with your PDFs, and backup copies of both.

Upgrade to Final Cut 10.0.7 destroyed my generators created in Motion that include drop zones. Anyone experienced the same problem ?

In Motion 5 I created generators that included a drop zone. The objective it to bring them into Final Cut and insert into the drop zone a clip of the same duration.
In FCX 10.0.6 I used to bring a clip to the time line and re size it to the exact duration of my generator. Then I bring the generator to the time line and selected the generator, click in the drop zone of the published parameters menu and select this clip I wanted to insert. The result was the generator using my clip and the clip playing during all the duration of the generator with the generator effect.
Now, with 10.0.7 I can’t make that work. When I click in the clip I would like to import into the drop zone, the result is that there’s just a frozen image of the clip (in the same place I clicked with the mouse)
Is this a known problem of 10.0.7. It used to work well in 10.0.6
Thanks for your help !

I can't see that the update would have any effect on custom generators as they are housed separately from FCP X.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Can I create a task that includes 2 C series modules?

I am trying to create a single task that includes 2 NI-9425 C series modules but when I wire the physical channel constant "Mod3/port0, Mod4/port0" into the DAQmx Create Virtual Channel.vi I receive error -200086 which states physical channel range syntax in the input string is invalid because multiple devices were listed in the string. It is my understanding from LabView help that multidevice tasks are allowed. Also according to this KB article http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA multi-device tasks are supported for S Series devices, C Series, and DSA devices, and according to this KB article http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I have formatted my physical channel constant correctly.
Can someone please explain why I am getting this error when all indications are that this should be a simple thing to do?
My C series modules are in slots 3 and 4 in a cDAQ-9188 chassis, I am currently running LabView 8.5.1, with Windows XP
Thank you,
Eric
Solved!
Go to Solution.

Hi Eric,
I'm afraid that you can't configure hardware timing with the NI 9425 in CompactDAQ. The NI 9425 data sheet explains: "The NI 9425 is a static digital module, so you can use it to perform software-timed or static operations only when installed in an NI CompactDAQ chassis."
For AI, AO, and counters, daisy chaining multiple calls to DAQmx Create Channel is equivalent to specifying a list of physical channels, but for DIO it's different. A single DIO virtual channel can contain multiple physical channels (lines). It would be completely reasonable to assume that specifying a list of lines with "one channel for all lines" would cause DAQmx to put all of the lines in a single virtual channel, but due to how it's implemented in the DAQmx framework, this is not possible when the lines are on multiple devices. It would also be reasonable to assume that if DAQmx couldn't put all of the lines in a single virtual channel, then it would create one virtual channel per device, but that's also not how it's implemented--it returns the error that you received.
Instead, here are two approaches to putting all 64 lines in one task. Either one should work.
Approach A: Create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0/line0:31 and MyChan1 contains cDAQ1Mod4/port0/line0:31. The Digital 2D Bool NChan 1Samp read VI returns a 2x32 array of Booleans. To flatten this into a 1D 64-element array, you need to use Reshape Array or some other method.
The DAQmx Task >> Channels property is there to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a for-loop to show that you don't have to hardcode multiple calls to DAQmx Create Channel. The "one channel for all lines" constant is redundant because that is the default.
Approach B: Create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This uses the "one channel for each line" constant, which is not the default. MyChan0 contains cDAQ1Mod3/port0/line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc. The Digital 1D Bool NChan 1Samp read VI returns a 1D 64-element array of Booleans. If you used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64x1 array because there are 64 virtual channels containing 1 line each.
Brad
Brad Keryan
NI R&D

Create type outline that includes stroke?

Hello. How do I create an outline out of type (as in Type>Create Outline) that includes the stroke? Can't find it anywhere.

That's one possible solution. But you still have a two color print. If your publication is B/W (or one color only) and you want a more richer black - be assured that at the print shop they can control te amount of ink that's printed.
In case of a B/W (one color) publication you coul'd also use a Spot colour, Pantone Coated or Uncoated (depends on the paper used) - as such a color has much better pigmentation it looks better when printed on paper than standard CMYK colors. The result is a better looking printed publication and you will save some money as you have only one color to print.
Just select a Pantone swatch and you will have no problems with trapping.
The same goes for full colour print - also in that case you will have a 5 color print (the four CMYK plates + one Spot color) but your solid background printed with the Spot color will be much better looking than when printed only in black.
When using negativ small type on a solid background I usually use a Spot color (I prefere Pantone) and a sans-serif or a slightly bolder serif typeface. I avoid using typefaces like regular TimesNew Roman. You could try to find some type face that has a SemiBold or DemiBold font style.

Unable to find a WSDL that has a definition for service name

Hello,
I have a wsdl shared in mds and a composite with a bpel process that consumes that wsdl, but when that happens I get the following error:
oracle.fabric.common.FabricInvocationException: Unable to find the WSDL service defined for service name {http://directvla.com/schema/businessdomain/ServiceConfigurationRules/v1-0}ServiceConfigurationRules_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.
I checked the composite, the wsdl and the endpoint and everything is ok. At the momment to avoid the error, the wsdl is local, but this is not a real solution, what I really need is to make it work with the mds.
Can somebody help me?
Thank for advance.

Hi,
here is my wsdl:
<definitions
targetNamespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0"
xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0" xmlns:tns="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
     <types>
          <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0" xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules" xmlns:tns="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
               <xsd:import namespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters" schemaLocation="oramds:/apps/schemas/RESB/RulesParmsInput_2.xsd"/>
          </xsd:schema>
     </types>
     <message name="ServiceActivationRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
     </message>
     <message name="ServiceActivationResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
     </message>
     <message name="ServiceActivationException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
     </message>
     <message name="GetAddActivationConfigurationRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
     </message>
     <message name="GetAddActivationConfigurationResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
     </message>
     <message name="GetAddActivationConfigurationException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
     </message>
     <message name="ResourceChangeMigrationRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
     </message>
     <message name="ResourceChangeMigrationResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
     </message>
     <message name="ResourceChangeMigrationException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
     </message>
     <message name="ResourceChangeMigrationUpgradeRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
     </message>
     <message name="ResourceChangeMigrationUpgradeResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
     </message>
     <message name="ResourceChangeMigrationUpgradeException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
     </message>
     <message name="GetServiceConfigurationException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
     </message>
     <message name="GetAntenaSenialRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
     </message>
     <message name="GetAntenaSenialResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
     </message>
     <message name="GetAntenaSenialException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
     </message>
     <message name="OrderPayPerViewRuleRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
     </message>
     <message name="OrderPayPerViewRuleResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
     </message>
     <message name="OrderPayPerViewRuleException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
     </message>
     <message name="GetOperationForWOServiceTypeRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
     </message>
     <message name="GetOperationForWOServiceTypeResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
     </message>
     <message name="GetOperationForWOServiceTypeException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException"/>
     </message>
     <message name="CompareResourceTechnologyRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
     </message>
     <message name="CompareResourceTechnologyResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
     </message>
     <message name="CompareResourceTechnologyException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyException"/>
     </message>
     <message name="GetBasicProductMigrationRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
     </message>
     <message name="GetBasicProductMigrationResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
     </message>
     <message name="GetBasicProductMigrationException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationException"/>
     </message>
     <message name="GetMaxResourcesForCustomerRequest">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
     </message>
     <message name="GetMaxResourcesForCustomerResponse">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
     </message>
     <message name="GetMaxResourcesForCustomerException">
          <part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException"/>
     </message>
     <portType name="ServiceConfigurationRules_pt">
          <operation name="GetAddActivationConfiguration">
               <input message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
               <output message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
               <fault name="GetAddActivationConfigurationException" message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
          </operation>
          <operation name="ResourceChangeMigration">
               <input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
               <output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
               <fault name="ResourceChangeMigrationException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
          </operation>
          <operation name="ResourceChangeMigrationUpgrade">
               <input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
               <output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
               <fault name="ResourceChangeMigrationUpgradeException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
          </operation>
          <operation name="GetAntenaSenial">
               <input message="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
               <output message="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
               <fault name="GetReasonResponseException" message="ServiceConfigurationRules-v1-0:GetAntenaSenialException"/>
          </operation>
          <operation name="OrderPayPerViewRule">
               <input message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
               <output message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
               <fault name="OrderPayPerViewRuleException" message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
          </operation>
          <operation name="GetServiceActivation">
               <input message="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
               <output message="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
               <fault name="ServiceActivationException" message="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
          </operation>
          <operation name="GetOperationForWOServiceType">
               <input message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
               <output message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
               <fault message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException" name="GetOperationForWOServiceTypeException"/>
          </operation>
          <operation name="GetMaxResourcesForCustomer">
               <input message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
               <output message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
               <fault message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException" name="GetMaxResourcesForCustomerException"/>
          </operation>
          <operation name="GetBasicProductMigration">
               <input message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
               <output message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
               <fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="GetBasicProductMigrationException"/>
          </operation>
          <operation name="CompareResourceTechnology">
               <input message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
               <output message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
               <fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="CompareResourceTechnologyException"/>
          </operation>
     </portType>
     <binding name="ServiceConfigurationRules_ptSOAP11Binding" type="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_pt">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="GetAddActivationConfiguration">
               <soap:operation style="document" soapAction="http://xxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAddActivationConfiguration"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="GetAddActivationConfigurationException">
                    <soap:fault name="GetAddActivationConfigurationException" use="literal"/>
               </fault>
          </operation>
          <operation name="ResourceChangeMigration">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigration"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="ResourceChangeMigrationException">
                    <soap:fault name="ResourceChangeMigrationException" use="literal"/>
               </fault>
          </operation>
          <operation name="ResourceChangeMigrationUpgrade">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigrationUpgrade"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="ResourceChangeMigrationUpgradeException">
                    <soap:fault name="ResourceChangeMigrationUpgradeException" use="literal"/>
               </fault>
          </operation>
          <operation name="GetAntenaSenial">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAntenaSenial"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="GetReasonResponseException">
                    <soap:fault name="GetReasonResponseException" use="literal"/>
               </fault>
          </operation>
          <operation name="OrderPayPerViewRule">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/OrderPayPerViewRule"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="OrderPayPerViewRuleException">
                    <soap:fault name="OrderPayPerViewRuleException" use="literal"/>
               </fault>
          </operation>
          <operation name="GetServiceActivation">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetServiceActivation"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="ServiceActivationException">
                    <soap:fault name="ServiceActivationException" use="literal"/>
               </fault>
          </operation>
          <operation name="GetOperationForWOServiceType">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetOperationForWOServiceType"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="GetOperationForWOServiceTypeException">
                    <soap:fault name="GetOperationForWOServiceTypeException" use="literal"/>
               </fault>
          </operation>
          <operation name="GetMaxResourcesForCustomer">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetMaxResourcesForCustomer"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="GetMaxResourcesForCustomerException">
                    <soap:fault name="GetMaxResourcesForCustomerException" use="literal"/>
               </fault>
          </operation>
          <operation name="GetBasicProductMigration">
               <soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetBasicProductMigration"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="GetBasicProductMigrationException">
                    <soap:fault name="GetBasicProductMigrationException" use="literal"/>
               </fault>
          </operation>
          <operation name="CompareResourceTechnology">
               <soap:operation style="document" soapAction="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/CompareResourceTechnology"/>
               <input>
                    <soap:body use="literal" parts="parameter"/>
               </input>
               <output>
                    <soap:body use="literal" parts="parameter"/>
               </output>
               <fault name="CompareResourceTechnologyException">
                    <soap:fault name="CompareResourceTechnologyException" use="literal"/>
               </fault>
          </operation>
     </binding>
     <plnk:partnerLinkType name="ServiceConfigurationRules_pt_PL">
          <plnk:role name="ServiceConfigurationRules_pt_Role">
               <plnk:portType name="tns:ServiceConfigurationRules_pt"/>
          </plnk:role>
     </plnk:partnerLinkType>
     <service name="ServiceConfigurationRules_pt">
          <port name="ServiceConfigurationRules_ptPort" binding="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_ptSOAP11Binding">
               <soap:address location="http://host:port/soa-infra/services/default/ServiceConfigurationRules/ServiceRules"/>
          </port>
     </service>
</definitions>
Thank you.

Unable to create a rule that includes "dimming" setting for lights

Similar Messages

Maybe you are looking for