Unable to create a technical system

Hi
I deleted a technical system and try to create the same but it is showing error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCClient.CreationClassName="SAP_BCClient",Name="620.SystemName.SRD.SystemLicenseNumber.0020471770.SystemHome.dbd106
i tried to deleted the components in content maintainance also(in administration),still i am getting same problem,
what other things i have to do,can anybody suggest
regards
raghu

Hi
Look this similar thread will solve your problem
CIM_ERR_ALREADY_EXISTS

Similar Messages

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Boot Camp - Setup was unable to create a new system partition....from Windows install

Hi folks. So I ran the boot camp wizard and made a USB install key for windows from that. I boot to it and everything works until I get to the install. I format the Boot Camp partition as indicated in the walkthrough and then I get "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." from the Windows installer. What do I do? Thanks.

just to add to the mix. . . i just got a new macbook retina.
Originally used a USB flash drive. Hit the same barrier described here.
Spent a few hours with drive unplugging / replugging silliness. No progress. Went back into OSX to attempt using an external DVD drive. There is no option for that in Bootcamp assistant now - must use USB.
Grabbed a different USB stick and started again. This time I used the other USB port on the macbook (the one on the left). Everything worked fine this time!?
You still have to go into "advanced options" and hit "format" when you get to the partition screen.
Moral of the story: different stick, different port. Sounds random. If that doesn't work, try changing your socks and putting on a hat.
Good luck!

Database tab is not filled in SLD after I create a technical system abap

Hi guys,
why is it? what do I have to set up to have this tab filled with valid values?
Thank you
Olian

Hi,
For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
Regards,
Rajeev Gupta

Windows 7 Setup was unable to create a new system partition

I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed. I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
a new system partition blah blah blah. I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
What I eventually found to be the solution was to go into the BIOS and change a setting. Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly. I think that's why other people had success after removing all external hard drives. After a
couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
Andy Mykrantz

Hi.
Thanks for sharing the information here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Acer aspire 5733 windows 7 intel core 13 inside, setupwas unable to create a new system partition orlocate an .......

i woke up today to see my laptop asking for a current password i entered
then it was asking
please input password for st9500325as
and nothing seems to be working
i tried to reboot the system and then the error message displayed in the title comes when i click next screen asking fro where do you want to install windows, i havent connected anything on the laptop and just
1 disc0 unallocated space 465.8gb
and i cant partition it also
i clicked on drive option and clicked on new( thets the only one i can click from the options) and it waited for some time as it is trying to do something and telling me failed to create new partition, what can i do. [laese explain in astep bt step
procedure,
i am not a genius on laptops or computer

Hi,
Quote: setup was unable to create a new system partition or locate an existing system partition.
It can be caused by corrupt partition table.
Boot from Windows installation media, press Shift + F10 at setup screen, and run chkdsk command to fix drive error.
http://technet.microsoft.com/en-us/magazine/dd637756.aspx
Also, please remmember to mark your system partition as active using diskpart command, if you do not have a system reserved partition.
http://www.sevenforums.com/tutorials/71432-partition-mark-active.html
NOTE This response contains a reference to a third
party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Andy Altmann
TechNet Community Support

Bootcamp windows 7 setup was unable to create a new system partition

I've been trying to load Win 7 sp1 64 for a week. Tried 4 versions, all 64b, made a new USB drive each time, I always get stuck in the same place:
"setup was unable to create a new system partition or locate existing system partition". I've tried everything, read MANY forums.
I read format in set-up many times, but it matters not! HELP!

Restart your machine and do a pram reset (google)
Open disk utility and repair permissions twice, also you should only have 1 partition
Then try boot camp assistant again
If this doesn't work, you'll need to either clean install OSX or have a terminal disk wizard from here try and help

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

Create a Technical System Web AS Java

Hi guys,
Anyone knows how to create a Technical Sys Web AS Java like we usual do with RZ70?
Thanks in advance,
Ricardo.

Hi -
Using the VA corresponding to the Web AS Java system, goto the SLD Data Supplier service, then Runtime tab->HTTP Settings tab (bottom). fill in required parms and save. To trigger an initial send, use the button ("This triggers data transfer to SLD...") - left most button on upper toolbar of service. Check your SLD for tech system creation.
Regards,
Jin

Eror Creating New Technical System in portal(SLD)

Hi creating SLD through Techinal system(in portal).When i click to register Message server to enter message server name and port ,it is displaying a below error:-
Please help me out
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.progmodel.context.ContextException: Node(TechnicalSystemDetailView.ABAPSystemDetail.MessageServer.LogonGroups): cannot bind or add elements because the node has no valid parent
    at com.sap.tc.webdynpro.progmodel.context.Node.prepareAddElement(Node.java:656)
    at com.sap.tc.webdynpro.progmodel.context.Node.addElement(Node.java:635)
    at com.sap.sld.wd.technicalsystem.TechnicalSystemDetailView.onActionNewLogonGroup(TechnicalSystemDetailView.java:616)
    at com.sap.sld.wd.technicalsystem.wdp.InternalTechnicalSystemDetailView.wdInvokeEventHandler(InternalTechnicalSystemDetailView.java:974)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; InfoPath.3)
Version     null
DOM version     null
Client Type     msie7
Client Type Profile     ie6
ActiveX     enabled
Cookies     enabled
Frames     enabled
Java Applets     enabled
JavaScript     enabled
Tables     enabled
VB Script     enabled
Server
Web Dynpro Runtime     Vendor: SAP, build ID: 7.0106.20091119084951.0000 (release=NW701_06_REL, buildtime=2010-01-06:15:21:34[UTC], changelist=75637, host=pwdfm246), build date: Mon Jan 10 02:17:55 SGT 2011
J2EE Engine     7.01 PatchLevel 75592.
Java VM     IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system     AIX, version: 6.1, architecture: ppc64
Session & Other
Session Locale     en_US
Time of Failure     Wed Feb 23 16:53:12 SGT 2011 (Java Time: 1298451192938)
Web Dynpro Code Generation Infos
sap.com/tcsldwd~main
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~landscape
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~technicalsystem
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)

Will suggest opening an OSS message.
Nikhil

Unable to create a Wiki - System Error!

Hi,
I have been trying to add a couple of child pages to some parent (main) pages.
I can enter the page name and enter the text (say).
When I click on save it gives me an 'system error!' message.
What could be the cause? Is there anyone who also is getting that error or it is just confined to me?
Best regards,
Harsh Dave

Thanks Hilit for your efforts!
Hilit wrote: 1. I've checked the permissions of the "The new Enhancement Framework and the new kernel-based BAdI" Wiki, you are supposed to able to edit it. This, in addition to the fact that you had managed to edit it before, leads me to think that maybe it was a temporary bug. Did you try to re-edit it after a couple of hours/days?
1. I tried to re-create wiki couple of times after the first time I encountered that situation. Since a week, I am trying daily but the situation remained same as before.
I hope that should be a temporary 'bug'.
Hilit wrote: 2. Regarding the other Wikis- can you recall whether the "The new Enhancement Framework..." and the "BTE - Business Transaction Event" were child pages of "Enhancements and Modifications...." also before you had this error? (i.e. when you managed to add the child pages in earlier times) ? In other words, is it a part of your error or was this said regardless?
Also, please note that the child page of "Enhancements and Modifications...." is actually a COPY of "The new Enhancement Framework...".
2. The wikis in the second point. I did not see that before as I attempted to add child pages recently and not anytime earlier. So, I am unaware of the situation that time .
This is the first time I am adding as child pages under "Enhancements and Modifications..." and "BTE - Business Transaction Event"
If you need more clarifications please give feedback!
Hilit wrote: since we're heading on our Passover Break
Have a nice break!
Any updates or possibilities?
Best regards,
Harsh Dave
Edited by: Harsh Dave on Apr 13, 2009 4:01 PM

Boot Camp - Setup was unable to create a new system partition

I'm getting this problem installing windows 7 via bootcamp on the macbook pro retina 13 using an usb drive. I looked up solutions online, and they involved unplugging other usb ports or moving the usb drive from one port to the other. I don't have any other usb drives connected when doing the windows installation, and I tried moving the usb drive with windows setup from one port to the other, but I'm still getting this error message. Are there any other solutions to the problem? Do I have a problem with the USB drive?

Hi Pharotek,
I had the same issue, trying to install Windows 7 on my new iMac yesterday and this morning. I couldn't ever get it to work in any configuration of usb port plugging but I read a lot of those suggestions too. Ultimately, I borrowed an external dvd drive and burned the Windows 7 iso to a dvd. Booting from the external dvd did the trick. To summarize, so hopefully I help others with this terribly-frustrating problem:
Use the Bootcamp Assistant to remove any half-finished windows partition (that should be checking the last checkbox only, to "remove").
Plug in an external dvd drive with a Windows 7 install disk. (Use the Disk Utility to burn the ISO to the DVD if needed.)
Plug in a USB thumb drive, which we will use to hold the Apple support files.Because order seems to matter, on my iMac with 4 usb ports at the back, facing the back of the iMac from right to left I had: external DVD drive, thumb drive, blank, apple keyboard w/ non-apple mouse plugged into keyboard.
Use Bootcamp Assistant:
uncheck option one (we don't need to copy the iso to the thumb drive, since we're using dvd)
check option two (we do want to copy the support files to the thumb drive)
check option three (we do want to install Windows! )
During the install process, if you've been booting from USB thumb drive, you'll likely get a message about making the thumb not bootable. Yes, we want to make the USB thumb drive not bootable now, as we are booting from the DVD and just using the thumb for support files.
Now the installation should work. Select the bootcamp partition, choose advanced, choose to format the BOOTCAMP partition as usual.
Dance around the office (optional.)
I believe the core issue is a unhappy melding of USB 3.0 issues and having a bootable USB thumb drive be the source of installation.
My external DVD drive was an Apple USB SuperDrive.

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
<b> "RFC Call failed: Error Opening an RFC Connection "</b>.
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

Error While Creating Technical System for SNC

Hi There,
I am trying to create technical system for SNC in SLD, I am not able to seee SNC as a s/w component/product in the list.
when I checked the list of components in SLD, I found SNC is there under product "SCMSNC" but this product is not in the list of products.
Please help me how I can get "SCMSNC" product in the product list.
Thanks,
Nishant

Can you please explain it little bit clearly?
I think you first create product, then SWC and then try to create Technical system.
While you will create the Technical system, in the last step it will ask you for installed products.
There you can specify ur product.
Thanks,
Hetal

Problem while creating WebAS ABAP Technical System in WAS 7

Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nair

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Unable to create a technical system

Similar Messages

Maybe you are looking for