Unable to create Aggregation level on Multiprovider
Hello Experts,
I am getting the following error when activating a newly created aggregation level on a certain Multiprovider.
Error : Aggregation level B2MP01L02: InfoProvider 0COMP_CODE cannot be used for definition.
0comp_code is a characteristic that I have included in a dimension of the Multiprovider. In the same dimension, i have another characteristic opcomp_code whose reference characteristic is also 0comp_code.
Could this be the source of the error? There are already many queries built on the Multiprovider, I am reluctant in deleting opcomp_code and check the impact while activating the Agg level.
Has anyone encountered this issue?
Any help will be greatly appreciated.
Thanks,
Nitish.
Hi Nitisch,
it seems that you get message RSPLS192, cf. long text of the message.
Not all multiproviders can be used as a basis for an aggregation level. The multiprovider has to contain at least one real-time InfoCube and not aggregation levels (aggregation levels cannot be nested).
Regards,
Gregor
Similar Messages
-
Problems creating aggregation levels over a Multiprovider
Hi experts,
When I create a aggregation level over a multiprovider the system returns an error " Infoprovider XX cannot be used for definition". I have read other threads with the same question and its solutions. I have checked my system and all is correct. The multiprovider has linked five infoproviders, one as real time.
Any Idea?
Please, it is very urgent to solve this.
Thanks a lot in advance.Hi Mayank and Ravi,
I have checked the identification of chars and kf. The realtime cube has five chars and a kf. All of them are assigned with all cubes witch are linked with the multiprovider.
I have tried by removing the realtime cube and the system shows the same error message. I have also tried by reactivating the cubes and multicube.
Any idea?
Thanks. -
Aggregation Level on Multiprovider
Hi All,
I have a planning function on aggregation level built on multiprovider.
When I try to Execute the planning function,the report is throwing an error as below-
*InfoProvider YF2_OTIFA is being used in manual planning or in a planning function. YF2_OTIFA is a MultiProvider or an aggregation level based on a MultiProvider. You are trying to create a data record for InfoProvider YF2MM_C1 but this InfoProvider is not contained in the MultiProvider.
System Response
The data record is invalid.
Procedure
Correct the entries in manual planning or check the parameterization of the planning function.*
Any Inputs?
regards,
RajendraHi Einstein,
Thanks for your valuable answer.
And sorry for delayed responce.
Yes you are right.I am using Web as front end and using data binding with query results.
Can you pls elaborate what you mean by use Infoprovider as a condition in the planning function
regards,
Rajendra
Edited by: Rajendra.Vmath on Jun 1, 2009 8:07 AM -
Input-ready query and aggregation level or multiprovider
Hi,
is it true that input-ready querys can only be created based on an aggregation level and not a multiprovider?
thanks.
regards
P.RexHi,
Input Ready Queries can only be built on aggregation levels.
If you want to create an input ready query on a multiprovider, first create an aggreagtion level on top of this multiprovider and build your query on this aggregation level.
If you have any problems in getting the input readiness, you can always revert.
Regards,
Srinivas kamireddy. -
User unable to create queries on a multiprovider that exists in production.
Helo,
I have an issue where one of the users is unable to create queries in BE X on a multiprovider as the multiprovider is not geting listed .He gets the message "No objects found ".
I have Checked and the multiprovider exist in test and production
We replicated the same user's production id into a test id in Test system , and the user is able to see the mutiprovider geting listed to create the query
Not sure what is the problem in production, Any help on this will be very useful.
Regards
JayuHi,
That User may not have the authorizations on that InfoArea and MP, so check it. See SAP help on Roles and Authorizations.
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/be/076f3b6c980c3be10000000a11402f/frameset.htm
Using RSECADMIN we can define the roles and authorizations in BI 7.
See some good posting sin SDN
First define the Roles as per your business and then assign the Objects i.e. Plant . Division etc..
http://wiki.sdn.sap.com/wiki/display/BI/AnalysisAuthorizationsinBI-+approach
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
Thanks
Reddy -
Aggregation Level Vs Multiprovider
Hi Folks,
Can some one can explain me what makes to use Aggregation Levels as we have an option of building Read Input Queries on Multiprovider it self?
Is it a mere performance issue or else thats the only way we need to go build a Input Query.
Also can some one tell me how I should final Layout after I have designed a RI Query in Bex Designer. So far my understanding is to Execute that Query
1. Bex Analyzer or else
2. Go and hook this query by using WAD.
What difference that really makes me in terms of functionalities between both layouts except for the Visual Feel might be different one in Excel and other on Web. Any major bottle necks here?
I really appreciate any kind inputs here for my above concerns.
Points will be assigned.
Thanks in advance for every input on this.
BI-IP GuestRavi/Manyak,
Thanks for your responses. I appreciate that and I understand that we cant build Input Ready Queries on regular Multiprovider.
How to decide like whether we should go with Multiprovider or Aggr Level for building my Ready Input Queries.
Ravi saying that it's when we want to do manipulations or else while using Planning Functions.
I find BPS more easy to understand when seen with IP especially when I built Lay outs. Atleast in BPS we can feel on what we are building. But here in IP Iam getting Confused on how to build Rolling Forecast Layouts and also using Aggregate Levels/ Multiproviders. Iam saying this in general what my situaion is.
Any comments for Knowledge Transfer will be highly appreciated.
Thanks,
BI-IP Guest -
Authorization for creating Aggregation Level
Hi Gurus,
i cant create AL in the planning modeler, i was reading some notes and i got the next questions:
1- I got in my profile the next auth objects, but still exist the problem, now appears something about Authorization templates for Integrated planning, where i can get this Auth objects? i do this or a Portal or basis Consultant?
S_RS_PL_ADMIN
S_RS_PL_PLANNER
S_RS_PL_PLANMOD_D----
> Planning modeler(Dev System)
You need following auth objects
S_RS_ALVL --> aggregation levels
S_RS_PLSE -->planning functions
S_RS_PLSQ-->planning sequences
S_RS_PLST-->planning function types
S_RS_PLENQ-->maintain and display lock settings
A portal role is required to use the planning modeler.
2- I read this note and said about import the support packages, this who can do it? me? a basis?
IP: Content-transferring aggregation levels
SAP Note Number: 913852
Support Packages
Add to Basket Software Component Release Package Name Download
SAP_BW 700 SAPKW70007
SAP_BW 71 710
SAP_BW_VIRTUAL_COMP 700 SAPK-70007INVCBWTECH
Solution
Import the specified Support Package or implement the attached corrections into your system
Support Packages
Add to Basket Software Component Release Package Name Download
SAP_BW 700 SAPKW70007
SAP_BW 71 710
SAP_BW_VIRTUAL_COMP 700 SAPK-70007INVCBWTECH
3- i think applying these 2 solutions i can solve the problem, i asked because i want to be sure to open a case to the related groups to apply this corrections to continue working, thanks Gurus i will really appreciate itx
-
What are steps followed in aggregation level in multiprovider
what are steps followed in aggregation level in multiprovider
I am kind of new too. But this site helped me to understand and deploy the example in weblogic.
Hope it helps you.
http://e-docs.bea.com/wls/docs81/webserv/example.html#1052582 -
Unable to create Aggregate Level on Multi Provider ( Real and Standard)
Hi all ,
I am not able to create a " Aggregate Level " on a Multi Provider. When i say create i can't see any info Objects for selections and everything is grayed out i can't select the check boxes . Any idea on what i am doing wrong ?
Is this an authorization issue ?Hi Suresh,
Are you trying to create an aggregate on the multiprovider? This is not possible...multiprovider itself does not contain any data.. -
Unable to Create Planning Level in BW3.5
Hi Friends:
I am trying to use SEM-BPS in BW3.5. I am in the process of creating a PLanning Area. I created it and assigned a InfoCube to it. When i click on the Variables Tab of the Planning Area it asks me to register the object. I guess it assumes that i am trying to modify a standard obbject where as I am only trying to create a 'Z' Object. I am already registered as a Developer in the system. Could anyone tell me what i am doing wrong.
Thanks
Mathew JohnHello Mathew,
the OSS note 781371 solves the problem!
Kind regards
Michael -
Change multiprovider which is assigned to aggregation level
Hi guys,
is there a easy way to change multiprovider which is assigned to aggregation level?
We have already some queries, filters and functions on the aggregation level. So we cant simply delete it and create another one. I just want to change multiprovider definition under the aggregation level as we decided to change naming convention for multiproviders.
Thanks in advance.
ZaferHi,
Aggregation levels are built on top of specific multiprovider. And you can not change the technical name of multiprovider.
But you can try following approach,
1) Create copy of current multiprovider, and then create aggregation level on top of that multiprovider.
2) Now try to copy the queries from source aggregation level to target using 'RSZC' transaction.
I am not sure whether this will work or not, but you can just give a try.
Regards,
Durgesh. -
Aggreagtion level in Multiprovider
Hello all,
need information on aggregation level.
What is aggregation level in multiprovider tab and in which scenario we use this tab?
Thanks,
Om Ambulker
Edited by: om4all on Jul 26, 2011 12:25 PMHi Om,
Transactional cubes are called real time infocubes in BI 7.0 terminology.
Once you create a real time infocube, you have to go to Tcode 'RSPLAN' which would open up the 'Planning Modeller' in portal.
You have to define your aggregation level in Portal and it would also be created in the backend.
Please refer documentation on Integated Planning for further details.
Thanks,
krishnan -
Aggregation level is locked by the Change and Transport Organizer
Dear All,
I have created aggregation level in the planning cube and transported to Production from dev, Once i transported to production i am not able to change the aggregation level in Dev, and also aggregation level is Inactive. Aggregation level YPNC2 is locked by the Change and Transport Organizer. Please suggest how to activate the aggregation level in Dev.
Thanks
ChristopherHi,
Kindly check the following,
1. Is your aggregation level transported properly to the production system ?
2. Was your aggregation level active while you were including it in the transport request ?
3. Did you properly include the aggregation level in the request?
If you find that the answers of all the above questions is "YES", then there should not be any problem in your aggregation level.
Hope this solves your issue, if not kindly get back to me.
Regards,
Balajee -
Aggregation level and filters in bi 7.0 reporting
hi friends,
what the use of creating aggregation level and filters in reporting in bps.
if u have any videos for bps, please send me links.
thanking u
suneel.Aggregation levels and filters are spefic objects used in Integrated Planning; they did ot exist in BPS. Aggregation level is similar to planning level and filter is similar to planning package. Agg levels and filters are the essential objects for planning with Integrated planning.
Ravi Thothadri -
When i try to create Filter on aggregation level the system gives me error
Hi BI Guru's,
I am facing a problem BI - IP .
When i try to create Filter on aggregation level the system gives me follwoing error.
"Authorization check of component failed"
"You do not have authorisation for Add or Create".
"Could not create Filter "
Please let me know if have any solution for this
Thanks & Regards,
Nilesh LabdeHere are list of auth objects for BI IP
S_RS_ALVL --> aggregation levels
S_RS_PLSE -->planning functions
S_RS_PLSQ-->planning sequences
S_RS_PLST-->planning function types
S_RS_PLENQ-->maintain and display lock settings
Authorization templates for Integrated planning are
S_RS_PL_ADMIN
S_RS_PL_PLANNER
S_RS_PL_PLANMOD_D----
> Planning modeler(Dev System)
A portal role is required to use the planning modeler.
Maybe you are looking for
-
There are many sites with 74.120.16. ranging from.19 to .150. They do not show up on Explorer, only on Mozilla. When checking on Bing these sites seem to be ad sites with a mention of honey pots?, although a description is limited. Using windows XP.
-
HT1414 I can't update Api 9-4-2013 because of hacker declear to deleting. How to do?
I can't send to Imported mails and connect from Facebook coads because of hacker using and look can see my secrm when what to do write ok?
-
Hey! Are there any better examples with diargrams how to configure zbf ha than these: http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_zbf/configuration/15-2mt/sec-data-zbf-15-2mt-book.pdf I just need a simple configuration where 2 routers LAN in
-
Final cut xprs 4 and capturing HDV from tape
Hi all I just tried for the first time to get FCXP4 to capture from my Canon HV20 in hidef and the software didn't do what the manual says it would do. Manual tells me to create a new bin in the browser and then hit command 8 and instead of the DV ca
-
How can i conect my iphone to a computrt and send music into the phone
i cant send music from itunes to the iphone