Unable to create Archiving for non-cumulative InfoCube

Dear Gurus,
I'm working with BI in SAP Nw 2004s with SAPKW70016 (Support Package 16) and need to create archiving on a non-cumulative Infocube (copy of 0RT_C36) but can't use tx RSDAP. Although I found note 1056294, which says that upon SP14 it can't be done the following message is sent:
Cannot create data archiving process for ZRT_C36
Message no. RSDA109
Diagnosis
You can only create a data archiving process for standard DataStore objects and standard InfoCubes. You cannot create a data archiving process for other InfoProviders such as VirtualProviders.
In particular, non-cumulative InfoCubes and write-optimized DataStore objects are not currently supported.
Please let me know what is wrong or how can I do this archiving in 2004s. I also read some documentation about RSDV transaction but couldn't find how to implement it using tx. RSDAP.
Thanks in advanced.
Best regards,
Pilar Infantas.

Please, any feedback about this issue???

Similar Messages

Archiving and reload possible for non-cumulative infocube 0IC_C03 ?

Hello,
Can the cube 0IC_C03 be archived and reloaded into another cube so that the data can be accessed via a multiprovider ? I read in help (http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm) that 'You cannot use the InfoCube together with another InfoCube with non-cumulative key figures in a MultiProvider'..
While archiving seems doable, I have doubts on the reload. How do we report the data once it is archived from this cube.. Any ideas ?
Thanks

hi
please check the below link.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ead8d7b55e1bd2e10000000a11466f/frameset.htm
Regards,
madhu

Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes <b>than</b> other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Incorrect results after compressing a non-cumulative InfoCube

Hi Gurus,
In BI 7.0 After compressing the non cumulative InfoCube its showing the incorrect reference points .leis_03_bf (pintail stock moments) showing as the reference points(opening Balance) after compressing as no marker update. Due to this its showing in correct result in reporting.please suggest me .
Thanks
Naveen

Hi Nirajan,
First of all as I undestood 2LIS_03_BX is the initial upload of stocks, so there is no need of delta load for this datasource, it collects data from MARC, and MARD tables when running the stock setup in R3 and you ahve to load it just one time.
If between delta loads of 2LIS_03_BF you're loading full updates you are dupplicating material movements data, the idea of compression with marker update is that this movements affects to the stock value in the query, it's because of that when you load the delta init you do it without marker update because these movements are contained in the opening stock loaded with 2LIS_03_BX so you dont want to affect the stock calculation.
You can refer to the How to handle Inventory management scenarios in BW for more detail on the topic.
I hope this helps,
Regards,
Carlos.

Error when adding Non-Cumulative InfoCube to a Multi-Providers

I want to include an InfoCube using non-cumulative key figures (0IC_C03) to a MultiProvider that includes other basic cubes. Is this possible? I thought I read that you could include one non-cumulative cube in a MultiProvider. When I added 0IC_C03 to the MultiProvider I get the following error when activating: "Define the characteristics of the validity table for non-cumulatives." The validity table is defined for 0IC_C03, do I need to do anything special in the multiprovider? Any ideas on what I need to do?
Thanks,
Chris
Edited by: Chris Robertson on Nov 18, 2008 4:52 PM

Hi Chris,
I am having the same issue. Did you manage to fix this?
Thanks,
Milind

Non cumulative infocube compression

Hi All,
Presently we have a problem with Non cumulative infocube comression.
It is like: Presently Non Cumulative infocube contains 2 years of data and we are extracting data from two datasources (2LIS_03_BX AND 2LIS_03_BF) since 2years it has not been compressed.
Now we are going to do the comprresion
It is like : 2LIS_03_BX Init load compreesing with marker update (not selecting check box).
2LIS_03_BF init load copressing without marker update (selecting check box)
2LIS_03_BF delta load compressing with marker update(not selecting check box)
2LIS_03_BX delta upload compressing without marker update(selecting check box)
Here my doubt is in between delta loads there are some full uploads from 2LIS_03_BF datasource how can i copress this full uploads from 2LIS_03_BF req's?
Please help me it is quiet urget.
Thanx,
Niranjan.

Hi Nirajan,
First of all as I undestood 2LIS_03_BX is the initial upload of stocks, so there is no need of delta load for this datasource, it collects data from MARC, and MARD tables when running the stock setup in R3 and you ahve to load it just one time.
If between delta loads of 2LIS_03_BF you're loading full updates you are dupplicating material movements data, the idea of compression with marker update is that this movements affects to the stock value in the query, it's because of that when you load the delta init you do it without marker update because these movements are contained in the opening stock loaded with 2LIS_03_BX so you dont want to affect the stock calculation.
You can refer to the How to handle Inventory management scenarios in BW for more detail on the topic.
I hope this helps,
Regards,
Carlos.

About non-cumulative InfoCubes

Hello Gurus,
what is non-cumulative InfoCubes?
Many thanks.

Hi,
0IC_C03 is used for inventory cube(also called as inventory cube)
normally inventory means both the stock inflow and outflow will be there that means some stock will come to the stock point the same day some stock move out from the godown that fro same object inflow outflow should maintain by using some code in updaterules(by using some indicators we will write the code).
for example: in one stock point one material is there today s its quantiy is 20kg and today itself 100 kg purchasing and 50 kg selling that means the now avilable quantity is old quanti20 + newpurchase100 -selling50kg means finally 70kg balance.
like that the non cumulative(it is not cumulating the all values)so it is working as non cumulative.
like that one more example
no of employs in ur copmany for the year 0f 2009
if it is cumulative keyfigure
if the employs are as below 2007--100no
2008---150
2009---75
if u r using that directly no of employs u can get all(10015075=325) if u not restricting the year with number of employs.
but in case of non cumulative it gives only 75 so it is correct.here we r using the year as ref in non cumulative keyfigure directly we r getting 75.
Thanks & Regarda
sathish
Thank

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

When do you go for non cumulative key figures?

hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hari

Hi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya.

Intregarted Planning Design for Non-Cumulative Key Figures

Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.

Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi.

BIA - Non-Cumulative InfoCubes

Anyone have experience with the BIA and non-cumulative InfoCubes ? Is the validity table (L-table) of the InfoCube indexed making it more feasible to add more validity-determining characteristics to the cube ?

Hi,
BI accelerator ( BIA ) allows you to improve the performance of BI queries when data is read from only possible with InfoCubes that have cumulative key figures...
Note provided by Marc is really nice............Anyways check this.....
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/48c0417951d117e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/11c4b71d-0a01-0010-5ca0-aadc2415b137#top
Regards,
Debjani.....

2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

Deployed four 2960X switches in a stack. All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page. I assumed this was a browser error. So tried Chrome then IE which both failed. Chrome was a bad display and IE fails to connect.
After this, I could not telnet or ssh. Plugged into the console and immediately started receiving:
%AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
%% Low on memory; try again later
I am unable to log in. I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window. When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command. I don't mind disabling HTTP.
Any suggestions?

I am currently working with TAC
The switches failed about 18 hours later and had to be rebooted to get back up. Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
SW13#sho proc mem sort | i Auth Manager
191   0 177721332   95004616   34757416          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177754888   95025696   34759780          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177774316   95037928   34761056          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177799720   95053940   34762888          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177824976   95069732   34764696          0          0 Auth Manager
SW13#
SW13#
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103448576 Free: 339348260
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103454416 Free: 339342420
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103455860 Free: 339340976
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103459236 Free: 339337600
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103461040 Free: 339335796

Cannot export video clips. Get message: "unable to create video for export"

Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GB

Yes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function.

Unable to compress non-cumulative infocube with 0DOC_NUM

Hi Gurus!
I'm working on a retail project. I've created an infocube based on 0RT_C01 to keep the stock movements. It is a non-cumulative cube.
After the load of the initialization data (2lis_03_bx) ,historical movements, the initialization of 2lis_03_bf, the daily delta loads take about 10-11 hours to complete.This is because the cube has not been compressed due to the existence of infoobject 0DOC_NUM. 0DOC_NUM is of the lowest granularity and so compressing on 0DOC_NUM will not yield any performance benefits. But this has impacted the performance of daily delta loads. Also,the report that uses this cube take about 3-4 hours to open initially.Sometimes a timeout occurs.I've checked in ST22, ST21 and no errors or dumps appear.
Is there anything I can check to speed up the process?
Thanks!
Lucia

Hi,
Compressing the request containing the opening stock that was uploaded. Make sure the "No marker update" indicator is not set. Please consider note 643687 ,before you carry out the compression of requests in stock Info Cubes!
After successfully uploading the historical material movements, the associated request has to be compressed. You must make sure the "No marker update" indicator is set. This is necessary because the historical material movements are
already contained in the opening stock.
Regards,
Suman

Unable to create Archiving for non-cumulative InfoCube

Similar Messages

Maybe you are looking for