Unable to create blank CD image

I am unable to create a blank MS-DOS FAT CD image using Disk Utility.
New Image
size: 663 (CD-ROM 80min)
Format: MS-DOS (FAT)
Encryption: none
Partitions CD/DVD
Image Format: read/write disk image
Hit [Create] button then progress bar appears and moves to completion. Then an error message box appears that says "Unable to create "test2.dmg." (Invalid argument)
Need to get this done so I can create gift CD's of my photos so if you know a work around for buidling a PC compatible CD I can take that too.
Thanks so much for your help.
Frank

Allan,
Thanks for the response.
I am making photo CDs for the parents of my son's soccer team. On each CD I put the JPEG originals plus a Flash slide show.
In the past this is what I have done:
1. In Disk Utility -> New Image with above parameters
2. Mount the new image
3. Put JPEGS and flash show on the image
4. In Disk Utility, select the image and select Burn
If I do this with MS-DOS (FAT) format, then anyone can read it (PC or MAC). If I use the Mac OS Extended (Journaled) then it can only be read on a MAC.
Can you think of another way to create a data CD?
Thanks!

Similar Messages

Unable to Create a Disk Image of Device

Hello.
The MacIntosh is a Mac Mini w/1.83Ghz Intel Core 2 Duo. The OS is Snow Leopard, 10.6.2. I am unable to create a disk image of the device "Macintosh HD".
Here's my procedure:
1) Reboot the Mac Mini from the Snow Leopard Install Disk
2) Set Language and then load "Disk Utility"
3) Select the Macintosh HD from Disk Utility
4) Set "Create a New Image from Macintosh HD"
5) Leave the settings as they are (type of disk image is "compressed" target repository is root home dir)
6) Error message is "Unable to create Macintosh HD (error -61)"
7) When I then try to create a blank disk image, once again, with root home as repository the error message is "Unable to create name.dmg (read-only) file system"
Any suggestions how to fix?
Thanks
Mike

you can smb from terminal but it will not help you. you'll need to create a folder which will serve as the mount point first and where will you put it? you can not do it on the dvd. and you can not put it in the main drive itself. but why do you need to do it that way at all. there is no need to boot from the DVD period. boot normally and clone your hard drive to a remote disk image on an smb share using one of many backup programs that can do this. Superduper can do it. so can CCCloner.

Unable to create restore disk image with Disk Utility

I've tried three times in order to create a restore image of the users' volume of my Powerbook. I followed exactly the procedure explained typing "man asr" in a terminal window. I booted the Powerbook in target disk mode while connected to my iMac G5 from which Disk utility was run. Every time the disk image creation failed with a log report like this:
Creating Image HOME_HD.dmg
Initializing...
Copying...
/Volumes/HOME_HD: Authentication error
Initializing...
Finishing...
Initializing...
Creating...
Copying...
could not access /Volumes/HOME_HD/./Users/delos/Music/iTunes/iTunes Music/David Bowie/The Best Of David Bowie 1974-1979/01 Sound And Vision.m4a - Input/output error
Finishing...
Unable to create HOME_HD - Input/output error.
I don't know how my imported music could create such a problem to Disk utility, nevertheless I removed the incriminated song from the Music library but another one raised to be not accessible. Then I booted the powerbook from the supplied Tiger DVD too, and I got an error over the music file, something about an allocation that was 190 instead of 1, I got the volume repaired from Disk utility but the Disk image creation failed again without any hint because booting from DVD does not allow to save log file anywhere. Why on Earth I can't manage such a critical task as back up under Tiger while using Panther everything worked like a charm following the same procedure? Is anyone experiencing something similar?
Greetings
Gianmarco

Hi Lee, thank you for your answer, indeed I've just read carefully your article few hours ago, while I googled the net to find some hints on my issue. I think that I've followed exactly the right procedure to make the back up image, and can't find what is wrong. Actually Disk utility Repair disk successfully repaired the allocation bit (whatever that means) of the music files but that wasn't enough to let the creation of the disk image. Quite odd that the music files where recognized as messed up by Disk utility only booting from Tiger DVD and not while the Powerbook was connected to an iMac running Tiger too.
I'll do further investigation during weekend.
Greetings
Gianmarco

Unable to create a disk image for mass deployment or to restore on other

I am attempting to create a master 10.5 Leopard image that can be deployed to other Macs, but the restore process fails with the following error:
*Restore Failure. Could not find any scan information. The source image needs to be imagedscanned/scanned for restore.*
I setup the master as I want it. I've booted from another drive and used Disk Utility to create a new image from Folder. (If I try to create a new image from drive, I get an error that the disk is in use.) I've run the checksum. I've run the scan image for restore. All process with out any errors.
The error mentioned above occurs when I try to restore the image to another computer.
Has anyone else been able to make a master image for deployment without using Leopard Server?

Hello,
I am also getting a similar error, but not trying to create an image, but rather reading one I created before upgrading to Leopard. I was having some HD trouble (power surge during install of Quicktime 7.3) that put my HD in any unstable state (resistant to Disk Utility/Disk Warrior,) but fortunately, I'd cloned the HD w/ SuperDuper (anticipating possible trouble during the upgrade.) I then made a disk image of the BOOTCAMP partition on another drive. Now, after re-formatting the HD, installing Leopard and partitioning for Bootcamp, I am unable to scan the image before restoring the disk image to the HD. It might be a FAT32 thing, but I don't think so.
The error is: Unable to scan "disk0s3.dmg". (Invalid argument)
The disk utility log is:
2007-11-08 20:33:43 +0100: Scanning image “disk0s3.dmg”
2007-11-08 20:33:53 +0100: cannot scan read/write images.
2007-11-08 20:33:53 +0100: Unable to scan “disk0s3.dmg”. (Invalid argument)
2007-11-08 20:33:53 +0100:
Any help would be appreciated. Thanks.

Why suddenly unable to create a disk image from a CD?

I successfully created a disk image from a CD only 5 days ago. Now when I try to create a disk image from a CD (with Disk Utility) the Superdrive rumbles along for sveral minutes, while the progress bar indicates that it has reached the end of its progress.
Only after all that does a dialog box indicate:
"Unable to create "___.dmg"-Invalid Argument. "
I haven't added software but did upgrade to iTunes 6. Doubtful that could affect my abilty to create a disk image.
Would someone kindly shed some light on why this may be happening?
Steve

Is it strange that this problem seems CD-specific?
Some CDs are copy-protected and some CDs are not copy-protected; so, no, it's not strange at all that you should be able to copy some CDs and not be able to copy others.
Tuttle
1682/8380

Unable to create a Disk Image

Hi!
I am trying to backup my boot HD to a disk image, a sparse bundle. I have done this successfully in the past using Carbon Copy Cloner and Super Duper, but this time I am getting an error message in both programs — "The image creation procedure failed". I have tried two internal HDs on my Mac Pro, and then an external Firewire HD as a target area for the disk image, and I get a same result. FInally I just tried to use OS X Disk Utility to create a disk image from scratch, and this also fails with a dialog "Unable to create name.sparsebundle, Resource Busy".
I can see there is some systemic issue here, but I don't understand what could that be. I would appreciate any wisdom on the matter, as I really have to backup my HD. Thanks in advance!
Rad

Hello,
I'm having the same problem. Re-installing the operating system fixed it, but I think Onyx messed it up again. Still not sure what it is that is causing it.
Reverting the setting on Onyx did not fix, and I don't want to go about re-installing again.
I'm wondering if you have run Onyx on your system lately?

Creating blank tiff image

Hi,
I want to create a new blank tiff image and attach the existing tiff images to this blank image side by side or columnwise.
How can i do this using java/JAI ?

Create the image on the hard disk, compress it or use a tool such as this one to split it into two, and move the compressed or segmented file to the external drive.
(37541)

Unable to create a 'computer image' for system recovery purposes using an external drive!

Just finished another very frustrating long session with HP Tech Support without a resolution to a simple problem.
This laptop is only 4 months old, but the hard drive is failing, according to constant notifications, and repeated BIOS hard drive diagnostic tests.
I wanted to be sure that all back-up/system restore precautions were taken. Not much to 'back-up' because the laptop is new. The standard 'back-up' was easily done on a 4 GB flash drive.
I followed instructions for 'create a system image' in order to make a 'copy of the drives required to restore your computer if your hard drive or computer ever stops working' (instructions right on the page).
I wanted to create this 'system image' on an external flash drive. First attempt at storing a system image failed because: 'the drive is not formatted with NTSF. The G flash drive was easily formatted to NTSF. Repeated attempts at copying now failed because: 'the drive is not a valid back-up location' (!?).
I see absolutely no clear reason why a 'computer image' cannot be created on a flash drive that has been correctly formatted.
HP Tech Support claims that the reason for this is a 'Windows incompatibility with the program' (used to create a 'system image?).
No solution was given. According to HP Tech Support, this is now a 'Windows software problem', which doesn't make any sense to me.
Standard CD-R data disks (the only ones I have on hand now) are not big enough: 700 MB capacity, but a DVD-R data disk, which has 4.7 GB capacity, may not be enough (especially in the future) for the creation of a 'system image'.
Since HP Tech Support is incapable of solving a straightforward problem like this, I am asking for some more experience tech geek to bring me up to speed on this whole issue of 'system image' creation, for the purpose of computer restoration, as I am hesitant to go ahead and remove the hard drive, if I haven't properly done everything to 'back-up' as much as I can.

Again: HP Tech Support cannot answer this question for me.
I posted the above problem onto the Windows Recovery forum also.
There are super-experienced people that view these questions. (I meant the term 'geek' in an appreciative way: without users solving problems, everything would grind to a halt!).
Please, if there is anyone who can comment on this, whether the whole issue of 'system image' is redundant, whether it is necessary at all, I would be grateful for a stab at this.
I have the sense that the answer is staring me right in the face, yet even HP Tech Support has no idea what it is.

Unable to create a recovery image

Hello,
I've just bought an HP Pavillion x2, it has a 64 GB SSD. I want to create a recovery image using the HP utility but when I try to it fails. I think it is because there isn't enough space on the Windows partition in order to create the image. I have a USB drive plugged in with 27GB free but it seems like it's creating the image on the C drive before it copies to the USB drive. I don't want to delete my recovery partition until I know I've got another copy and I can't find anything else to uninstall to get the 14 GB i need (have 12 GB free). I've only had the tablet a few days so haven't got much on here, have uninstalled everything I've put on here except for the Windows updates I did. I've cleared the temp file wimy user profile.
Does anyone have any ideas what I can do?
Thanks
Juliet
This question was solved.
View Solution.

I did go through the Windows routine of creating a recovery image but it was slightly vague as to whether it would be suitable. Anyway I eventually restored the machine to factory defaults, created the recovery image straight away and it worked fine, then after installing Win 8.1 I ended up with loads more free space anyway.

Unable to create from an image

Hi,
First use of Kuler/Color CC. 'm logged in, but I cannot get the 'Create from image' function to work - I've tried uploading a number of images as a jpg, gif, bmp, png, but on each occasion I get the 'Selected file type is not supported' message. Is there something I've been overlooking? Any advice gratefully received.
Nick

Hi musti168,
You're going through your entire image pixel-by-pixel and getting each of their values - why don't you just use the IMAQ ImageToArray function?
On this forum post I found an example of IMAQ ArrayToImage: http://forums.ni.com/t5/LabVIEW/IMAQ-arraytoimage-example/td-p/68418
You can use some of the IMAQ Image Processing palette to change the image to gray scale - possibly a threshold.
Julian R.
Applications Engineer
National Instruments

Unable to create cd from Image file

I downloaded the Solaris 8 for Intel, unzipped the files. I have been unsuccessful creating an image file for the file sol-8-1_01-fcs-bin-ia-v1. I have tried various CD writing applications.
I was able to create images from the other files.
Thanks

You are not supposed to create an image file from the unzipped data. These unzipped files are image
files! You just have to rename them using the proper file extension so that your CD-R burning software
recognizes them as cd image files. (common extension are .ISO or .RAW; check with your CD recording
software)

Unable to create an encrypted disk image in Lion

disk utility gives the error Unable to create "Volume.dmg." (error - 60008) when creating an encrypted disk image. I am using the following steps:
    1.    Open disk utility
    2.    Select the disk (internal or external) to create the image on
    3.    Select File>New>Blank Disk Image…
    4.    Save As: 'Volume'
    5.    Name: Volume
    6.    Size: 50GB
    7.    Format: Mac OS Extended (Journaled)
    8.    Encryption: 128-bit AES encryption
    9.    Image Format: read/write disk image
    10.    Click the Create button
    11.    Password dialog appears
    12.    When I enter a password the dialog closes after entering only a few characters i.e. before I've finished typing, and the following error message displays:
Unable to create "Volume.dmg." (error - 60008)
I have previously, successfully, created encrypted disk images in Snow Leopard, and I don't know why I can't in Lion
Does anyone have any ideas?

Thanks for this Thomas.
I've tried naming the image differently, but still received the error, I did however try different permutations for the password.
The error seems to happen if I use a purely numerical password string and occurs on input of the 10th numerical character, if I start with numerical character but use an alpha before the 9th number I can continue and create a password, and I can create a password if I start with an alpha and switch to numerals after the first alpha character, purely alphabetical passwords are fine too.
It seems that Lion doesn't like purely numerical passwords greater than 9 characters, whereas Snow Leopard wasn't so fussy. Seems it's a bit of a bug.
Thanks for your help

Unable to create an encrypted disk image with Disk Utility

Hi:
With our upgrade to Lion a few weeks ago, we're now unable to create an encrypted disk image of any type using Disk Utility any more. This problem occurs on 3 different machines, and is reproducible whether one is using an internal HD or an external FW HD. We can successfully create nonencrypted disk images.
This is a duplicate post with all the details here: https://discussions.apple.com/message/18469359#18469359
We haven't had any luck with a solution trying various permissions fixes as helpfully suggested by other readers in response to the error message # (-60008 error), so I'm hoping that someone else has run across a solution from the encrypted disk image perspective and that this tag line will generate some help.
Thank you!

Save As: 01 (on Desktop)
Name: 01
Size: 100 MB
Format: Mac OS Encrypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890
This says password strength is "Weak"
All works fine
Then I repeated this using:
Save As: 02 (on Desktop)
Name: 02
Size: 100 MB
Format: Mac OS Encypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890 and when I start to enter the next "1" I get the "Unable to create "02.dmg." (error -60008)
OS 10.7.4
Disk Utility Version 12.1.1 (353)

Unable to create image buffer after RAM preview

Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
Some more details about my comp:
1920x1080 @ 29.97
Ray-traced 3D
About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
Running Windows 7 Professional
i7 2600K
32GB RAM
2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
508GB free on my 2TB internal drive where the project and cache lives
From my GPU info window in case it's useful:
Fast Draft:
Available
Texture Memory:
600.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 570/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
2 (GeForce GTX 570, GeForce GTX 570)
Current Usable Memory:
1.04 GB (at application launch)
Maximum Usable Memory:
1.25 GB

Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
Mylenium

Unable to create Disc Image from DVD

I get the following error when trying to make a copy of a family wedding DVD. I'm using Disc Utility and creating the image as a DVD/CD master (.cdr) file. It gets to about 3/4 of the way and then gives the following error.
The internal drive is a PIONEER DVD-RW DVR-K05
Sep 10 22:13:24: Disk Utility started.
Creating Image “Wedding of xxx & xxx.cdr”
Reading VOLUME_IDENTIFIER (Apple_UDF : 0)...
Unable to create “Wedding of Sarah & Federico.cdr” - Input/output error.
I've tried twice now and the same error. Looks like I might have to use Toast/Popcorn etc?
Thanks,
Darren
iMac G5 2.1GHz 1Gb RAM 260Gb HDD Mac OS X (10.4.7)

I do not know what that error means. However, if you open up the Disk Utility & go into it's Help Menu & in the search field type duplicating a CD or DVD. There you will find detailed instructions on how to create a disc image from a DVD.
Good possibility your answer may be found there and/or there may have been something you missed in creating a disc image.
Good luck.

Unable to create blank CD image

Similar Messages

Maybe you are looking for