Unable to create cd from Image file

I downloaded the Solaris 8 for Intel, unzipped the files. I have been unsuccessful creating an image file for the file sol-8-1_01-fcs-bin-ia-v1. I have tried various CD writing applications.
I was able to create images from the other files.
Thanks

You are not supposed to create an image file from the unzipped data. These unzipped files are image
files! You just have to rename them using the proper file extension so that your CD-R burning software
recognizes them as cd image files. (common extension are .ISO or .RAW; check with your CD recording
software)

Similar Messages

  • Unusual Bug when creating pdf from image files

    Hi I have a very mindboggling problem which I cant seem to get my head around.
    basically I am trying to create a pdf using a large amount of image files, these images are scans of pages of a book. so I have been trying to create a pdf file from these images, and everytime i try, it all looks ok except for one page which comes up smaller in size than the rest which is a big problem and very unusual. If I change the view of acrobat so that it shows two pages at a time then this is clearly visable where one page is normal and the page next to it is like a third of the size. Ive checked the image file properties for that page and they are more or less the same as the rest, the dimensions of the image file too, but when I add it into a PDF it seems to shrink in size, any ideas as to why? any help would be much appreciated! (and I hope what I said made sense lol )
    Thanks
    Nav

    Hi Davew000
    Can you please tell the steps you are doing to create the PDF ?
    Thanks,
    Tanvi

  • Unable to create PDF from Publisher file

    I am able to create .pdf from a .jpg, also from an .xls ... but not from a Publisher document (2007).
    I get a prompt to run in repair mode and I tried that (twice) but the problem is not being corrected.  At one point I had a message about PDFMOUTLOOK and thought I disabled it.   I tried both ways, from inside Publisher, and dire Any help will be greatly appreciated.ctly from Adobe Acrobat 9 Pro ... neither works.
    Below is the log:
    %%[ ProductName: Distiller ]%%
    %%[ Error: typecheck; OffendingCommand: xshow ]%%
    Stack:
    -169
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    LinK

    Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
    In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
    PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

  • Unable to create PDF from dwg Files

    Hi All,
    I suspect this question is old hat but if anybody can provide a solution it would be greatly appreciated. Acrobat 8.3.0 professional edition Windows XP sp3.
    It used to work a long time ago but when I try to convert a dwg to PDF the message "An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF". I looked at the "create PDF" options in preferences and only security options are shown for Autocad files so I know something is amiss.
    I have tried adding a printer using the ini file in the xtras folder in Acrobat and when I look at printing preferences (before and then after the install) all the boxes are blank - again an indication something is wrong?
    I have tried the repair function in the control panel - still no good.
    Any (polite) suggestions other than buying X?
    Many thanks

    Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
    In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
    PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

  • Unable to create cofile from data file

    Hi All,
    I am trying to create a cofile with the commane **** tp createcofile <TR>**** and getting the following error .....
    ---> tp CREATECOFILE DC1K900012 pf=/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL
    This is tp version 372.04.65 (release 701, unicode enabled)
    /usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/DC1KK900012.DC1: Not a directory
    /usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/SLOG1021.DC1.LOC: Not a directory
    PANIC --> exiting
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0212
    tp finished with return code: 212
    meaning:
    could not access file as supposed (see dev_tp or SLOG1021.DC1 for more details)
    Please help with the syntax of creating a cofile ....
    Thanks in Advance.
    Regards,
    Revanth Kumar

    It may be because of TRANSDIR profile entry pointing to /usr/sap/trans/bin/TP_DOMAIN_DC1.PFL instead of /usr/sap/trans.
    its not able to access tmp folder under the trans file system.

  • Unable to Create a Disk Image of Device

    Hello.
    The MacIntosh is a Mac Mini w/1.83Ghz Intel Core 2 Duo. The OS is Snow Leopard, 10.6.2. I am unable to create a disk image of the device "Macintosh HD".
    Here's my procedure:
    1) Reboot the Mac Mini from the Snow Leopard Install Disk
    2) Set Language and then load "Disk Utility"
    3) Select the Macintosh HD from Disk Utility
    4) Set "Create a New Image from Macintosh HD"
    5) Leave the settings as they are (type of disk image is "compressed" target repository is root home dir)
    6) Error message is "Unable to create Macintosh HD (error -61)"
    7) When I then try to create a blank disk image, once again, with root home as repository the error message is "Unable to create name.dmg (read-only) file system"
    Any suggestions how to fix?
    Thanks
    Mike

    you can smb from terminal but it will not help you. you'll need to create a folder which will serve as the mount point first and where will you put it? you can not do it on the dvd. and you can not put it in the main drive itself. but why do you need to do it that way at all. there is no need to boot from the DVD period. boot normally and clone your hard drive to a remote disk image on an smb share using one of many backup programs that can do this. Superduper can do it. so can CCCloner.

  • Unable to create envelope from given source:

    Hi all,
    1) actually i have wrote a servlet and i am trying to get a SOAPMessage from input stream...the code is as follows
    public void doPost(HttpServletRequest request, HttpServletResponse response)
                   throws ServletException, IOException      {
              try
              {     InputStream inputStream= request.getInputStream();
                   InputStreamReader ir = new InputStreamReader(inputStream);
                   BufferedReader br = new BufferedReader(ir);
                   String theLine;
         while ((theLine = br.readLine()) != null)
         System.out.println(theLine);          
         MimeHeaders headers = getHeaders(request);
         MessageFactory msgFactory = MessageFactory.newInstance();
         SOAPMessage msg = msgFactory.createMessage(headers, inputStream);
         SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
         SOAPBody body = envelope.getBody();
              catch(Exception e)
                   e.printStackTrace();
    public MimeHeaders getHeaders(HttpServletRequest req) {
              Enumeration enum1 = req.getHeaderNames();
              MimeHeaders headers = new MimeHeaders();
              while (enum1.hasMoreElements()) {
              String headerName = (String)enum1.nextElement();
              String headerValue = req.getHeader(headerName);
              StringTokenizer values = new StringTokenizer(headerValue, ",");
              while (values.hasMoreTokens()) {
              try{
              String strValue = values.nextToken().trim();
              headers.addHeader(headerName, strValue);
              }catch (Exception e){
              System.out.println("SAAJ_Simple_Receive getHeaders: " + e);
              return headers;
    2) i have added mails.jar,saaj-api.jar,saaj-impl.jar,saaj-ri.jar,xalan.jar,activation.jar,xercesimpl.jar and servlet.jar
    3)but i am getting following exception
    com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
    13:39:29,986 ERROR [STDERR]      at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:148)
    13:39:29,986 ERROR [STDERR]      at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPPart1_1Impl.createEnvelopeFromSource(SOAPPart1_1Impl.java:102)
    13:39:29,986 ERROR [STDERR]      at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:156)
    13:39:29,986 ERROR [STDERR]      at InterceptorServletClass.doPost(InterceptorServletClass.java:88)
    13:39:29,986 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    13:39:30,018 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    13:39:30,018 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    13:39:30,018 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
    13:39:30,018 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
    13:39:30,018 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    13:39:30,018 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
    13:39:30,018 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
    13:39:30,018 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
    13:39:30,018 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
    13:39:30,018 ERROR [STDERR]      at java.lang.Thread.run(Unknown Source)
    4) can anyone plz tell me how would i resolve this problem... do i need to add any more jar fils?????
    thanks in adavance(waiting for reply)

    Try editing the file and put only the <SOAP-ENV:Envelope> XML into your file.
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Head
    er><edc:transid xmlns:edc="http://www.edc.com">4</edc:transid><edc:cmdid xmlns:edc="http://www.edc.com">50</edc:cmdid><edc:attDataInfo xmlns:edc="http://www.edc.com">.\testdata\FormExample.xml</edc:attDataInf o></SOAP-ENV:Header><SOAP-ENV:Body/></SOAP-ENV:Envelope>
    i.e remove all the "Part", "Content-type: text/xml", "image.jpeg" stuff.

  • Illustrator script to create symbols from images in folder

    Time to give back to the community...
    Here is a script I recently devised to bulk create symbols from images in a folder. Tested with Illustrator CC 2014.
    // Import Folder's Files as Symbols - Illustrator CC script
    // Description: Creates symbols from images in the designated folder into current document
    // Author     : Oscar Rines (oscarrines (at) gmail.com)
    // Version    : 1.0.0 on 2014-09-21
    // Reused code from "Import Folder's Files as Layers - Illustrator CS3 script"
    // by Nathaniel V. KELSO ([email protected])
    #target illustrator
    function getFolder() {
      return Folder.selectDialog('Please select the folder to be imported:', Folder('~'));
    function symbolExists(seekInDoc, seekSymbol) {
        for (var j=0; j < seekInDoc.symbols.length; j++) {
            if (seekInDoc.symbols[j].name == seekSymbol) {
                return true;
        return false;
    function importFolderContents(selectedFolder) {
        var activeDoc = app.activeDocument;     //Active object reference
      // if a folder was selected continue with action, otherwise quit
      if (selectedFolder) {
            var newsymbol;              //Symbol object reference
            var placedart;              //PlacedItem object reference
            var fname;                  //File name
            var sname;                  //Symbol name
            var symbolcount = 0;        //Number of symbols added
            var templayer = activeDoc.layers.add(); //Create a new temporary layer
            templayer.name = "Temporary layer"
            var imageList = selectedFolder.getFiles(); //retrieve files in the folder
            // Create a palette-type window (a modeless or floating dialog),
            var win = new Window("palette", "SnpCreateProgressBar", {x:100, y:100, width:750, height:310});
            win.pnl = win.add("panel", [10, 10, 740, 255], "Progress"); //add a panel to contain the components
            win.pnl.currentTaskLabel = win.pnl.add("statictext", [10, 18, 620, 33], "Examining: -"); //label indicating current file being examined
            win.pnl.progBarLabel = win.pnl.add("statictext", [620, 18, 720, 33], "0/0"); //progress bar label
            win.pnl.progBarLabel.justify = 'right';
            win.pnl.progBar = win.pnl.add("progressbar", [10, 35, 720, 60], 0, imageList.length-1); //progress bar
            win.pnl.symbolCount = win.pnl.add("statictext", [10, 70, 710, 85], "Symbols added: 0"); //label indicating number of symbols created
            win.pnl.symbolLabel = win.pnl.add("statictext", [10, 85, 710, 100], "Last added symbol: -"); //label indicating name of the symbol created
            win.pnl.errorListLabel = win.pnl.add("statictext", [10, 110, 720, 125], "Error log:"); //progress bar label
            win.pnl.errorList = win.pnl.add ("edittext", [10, 125, 720, 225], "", {multiline: true, scrolling: true}); //errorlist
            //win.pnl.errorList.graphics.font = ScriptUI.newFont ("Arial", "REGULAR", 7);
            //win.pnl.errorList.graphics.foregroundColor = win.pnl.errorList.graphics.newPen(ScriptUIGraphics.PenType.SOLID_COLOR, [1, 0, 0, 1], 1);
            win.doneButton = win.add("button", [640, 265, 740, 295], "OK"); //button to dispose the panel
            win.doneButton.onClick = function () //define behavior for the "Done" button
                win.close();
            win.center();
            win.show();
            //Iterate images
            for (var i = 0; i < imageList.length; i++) {
                win.pnl.currentTaskLabel.text = 'Examining: ' + imageList[i].name; //update current file indicator
                win.pnl.progBarLabel.text = i+1 + '/' + imageList.length; //update file count
                win.pnl.progBar.value = i+1; //update progress bar
                if (imageList[i] instanceof File) {         
                    fname = imageList[i].name.toLowerCase(); //convert file name to lowercase to check for supported formats
                    if( (fname.indexOf('.eps') == -1) &&
                        (fname.indexOf('.png') == -1)) {
                        win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Not a supported type.\r'; //log error
                        continue; // skip unsupported formats
                    else {
                        sname = imageList[i].name.substring(0, imageList[i].name.lastIndexOf(".") ); //discard file extension
                        // Check for duplicate symbol name;
                        if (symbolExists(activeDoc, sname)) {
                            win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Duplicate symbol for name: ' + sname + '\r'; //log error
                        else {
                            placedart = activeDoc.placedItems.add(); //get a reference to a new placedItem object
                            placedart.file = imageList[i]; //link the object to the image on disk
                            placedart.name =  sname; //give the placed item a name
                            placedart.embed();   //make this a RasterItem
                            placedart = activeDoc.rasterItems.getByName(sname); //get a reference to the newly created raster item
                            newsymbol = activeDoc.symbols.add(placedart); //add the raster item to the symbols                 
                            newsymbol.name = sname; //name the symbol
                            symbolcount++; //update the count of symbols created
                            placedart.remove(); //remove the raster item from the canvas
                            win.pnl.symbolCount.text = 'Symbols added: ' + symbolcount; //update created number of symbols indicator
                            win.pnl.symbolLabel.text = 'Last added symbol: ' + sname; //update created symbol indicator
                else {
                    win.pnl.errorList.text += 'Skipping ' + imageList[i].name + '. Not a regular file.\r'; //log error
                win.update(); //required so pop-up window content updates are shown
            win.pnl.currentTaskLabel.text = ''; //clear current file indicator
            // Final verdict
            if (symbolcount >0) {
                win.pnl.symbolLabel.text = 'Symbol library changed. Do not forget to save your work';
            else {
                win.pnl.symbolLabel.text = 'No new symbols added to the library';
            win.update(); //update window contents
            templayer.remove(); //remove the temporary layer
        else {
            alert("Action cancelled by user");
    if ( app.documents.length > 0 ) {
        importFolderContents( getFolder() );
    else{
        Window.alert("You must open at least one document.");

    Thank you, nice job & I am looking forward to trying it out!

  • Unable to create xml from xml schema

    JDeveloper 10.1.3 EA1
    I am unable to create a new xml file from an xml schema when the starting root element is a complex type (but it works with a simple type). It does not matter if the xml schema is registered within JDeveloper.
    Is this a bug or intended behaviour?
    Error message:
    ''XML Document from XML Schema creation could not be competed succesfully. Make sure the source schema is valid and that you have write permissions to the output directory."
    NB The xml schema is valid and I have write permissions on the specified directory.

    When I do not register this (or other) schema with JDeveloper, I can create an xml document from xml schema. However, when I register this schema and then try to generate an xml document (either from the registered xsd either from a filesystem xsd) with person as starting node it fails with the mentioned error. However, when I use city as starting node it is generated successfully.
    <?xml version="1.0" encoding="windows-1252" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns="http://www.amis.nl/demo/hrm"
    targetNamespace="http://www.amis.nl/demo/hrm"
    elementFormDefault="qualified">
    <xsd:element name="person">
    <xsd:annotation>
    <xsd:documentation>
    A sample complex element
    </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="name" type="xsd:string"/>
    <xsd:element name="length" type="xsd:int"/>
    <xsd:element name="weight" type="xsd:int" />
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    <xsd:element name="city" type="xsd:string">
    <xsd:annotation>
    <xsd:documentation>
    A sample simple element.
    </xsd:documentation>
    </xsd:annotation>
    </xsd:element>
    </xsd:schema>

  • Unable to create the test suits file!

    Dear Experts!
    Getting the "Unable to create the test suits file!" error while opening .bpel file in JDeveloper 10.1.3.5. Also, all the partner links showing warning symbol. When I click on them, getting the following error:
    ERROR:WSDLException: faultCode=INVALID_WSDL: Invalid XML in document at: Start of root element expected.
    Looks like partner links are not mapped correctly. Could you please throw some light, where I need to fix the issue.
    Appreciate your help.
    Thank you.

    I had similar issue sometimes back, error was because sample xml my test was using wasn't conforming to my code. In my case, I didn't write test suite so deployment was successful and was getting error while testing post deployment. In your case, test suite will execute.
    Try to follow your xslt mapping or any xpath statements within bpel flow, it must be having direct mapping of some element from source but your sample input xml might not be having that element and hence resulting in error. Try iterative debugging by adding more elements in input xml.
    Regards,
    Ankit

  • Unable to Create Invoice from iSupplier

    I am unable to create invoice from isupplier module,
    the moment i click on create invoice "with a PO" or "without a PO" under finance Tab,
    i get this error "You cannot complete this task because you accessed this page using the browser's navigation button(the browser Back button, for example).
    But I have not accessed the pages with any browser navigation buttons at all.
    please advise what may be preventing me from creating invoice?

    This is caused by the incorrect setup of the browser.
    The browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" was set to "Never". This caused the browser to pull up the old data instead of querying the server.
    Please make sure the browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" is set to "Automatic".
    You Used Your Browser's Navigation Buttons To Get Here (Doc ID 1214138.1)

  • Unable to view two different image files at once in PS CS4

    For some reason I am unable to open two separate image files and view them both on my screen in Photoshop CS 4.  My goal is to combine two versions of the same raw file in order to expand the tonal range.  I want to stack the 2 images and then use a layer mask to blend the best parts of both versions.  The problem is that when I open the second version, the first isn't visible until I close the top image.  I want to view both images on the screen and stack them but can't do that because I only see one.  Can some kind soul tell me what I'm doing wrong here?

    Thanks for responding.  This works really well.  I did learn that if I go to Window>Arrange>Float All in Windows (thanks to another email from the forum) that I can view both images at the same time.  I sure appreciate your help.  You have no idea how I've agonized over this darn thing.  Thanks again, Gladys
    Please view this as an Option to perform your task. There are smarter ways to do this but this is what I do...
    *) I pull up the image file (say pic_01) and adjust the levels in the area of the photo I want.
    *) I then open from the RAW doc and it is now sitting as a Tiff in Photoshop.
    *) I rename that file (such as pic_01Top) and SAVE. (But keep it open)
    *) I go back and reopen pic_01 in RAW and adjust the other properties I want.
    *) Open that image from RAW.
    *) Perform a ctrl c to copy.
    *) Close pic_01
    *) Do a cntrl v to copy that over pic_01Top
    *) Go to Layers-Layer mask-Hide all. (This also give you your "free" layer mask)
    *) Go to my brush tool.
    *) Use the black over white box arrow to reveal or conceal your bush strokes.
    *) Flatten file when done and Save anyway you wish.
    Hope this helps.
    >

  • Unable to create an executable jar file

    Hi,
    I am unable to create an executable jar file,
    I am using the command as follows:
    C\> jar cvfm MyJarName.jar manifest.txt Demo.class
    where as Demo.class has appropriate main method; manifest.txt contains [ Main-Class: Demo ] and a new line
    Please help.
    thanks & regards
    M K Rayapudi
    Edited by: R6i on Apr 30, 2009 5:15 AM

    Your jar is perfectly generated, but your machine has a problem with .jar file associations.
    You have two options:
    1. Play with the registry. Dangereous if you are not used to.
    2. Reinstall the jre.
    Just to verify my theory, open a command prompt and the command:
    reg query HKCR\jarfile\shell\open\command
    What does it say? I have executed your command , here is the output
    HKEY_CLASSES_ROOT\jarfile\shell\open\command
        (Default)    REG_SZ    "C:\Program Files\Java\jre6\bin\javaw.exe" -jar "%1" %*I am not getting anything from this command, can you please explain clearly.
    thanks & regards
    M K Rayapudi
    Edited by: R6i on May 3, 2009 10:18 PM

  • Choose File Form Data Create Spreasheet From Data Files

    I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
    However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
    What am I not doing properly? How do I accomplish this task?
    Thanks!

    Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
    Best wishes,
    Kevin Palmer

  • Unable to create the test suite file

    Hi,
    I imported a BPEL project to my JDeveloper ver 10.1.3.3.0. When I clicked on the <project name>.bpel, I got the
    "unable to create the test suite file" error and all the partnerlinks have a bang sign (!). None of the partner link works.
    Please help,
    Thanks,
    Amorsolo

    Probably you might want to post it in the BPEL forum.
    BPEL
    -Arun

Maybe you are looking for