Unable to create Confirmations using Portal

Hi All,
When we are trying to create a Confirmation and trying to search for a particular PO the following error message is being shown
"No documents correspond to search criteria"
But all the POs the created in the backend.
Can anyone give a solution.
Regards,
Rahul.

Check if you have enough auth. If you are using SRM, run BBP_GET_STATUS_2 once for the relevant SC and then try. Make sure the PO is open in backend.
Regards
TGB

Similar Messages

Unable to create confirmation/invoice in SRM,Classic Scenario

Hi Guru's,
I am unable to create Confirmation/Invoice in the Portal, attached the screen shot of the error
its is the problem with the ADRC table, there is no entry in the table for the BP.
I tried to access the table via SM30 to add the entry in ADRC manually, I get a message table maintenance not defined
Regards,
Kiran

Hi Kiran,
Could you please also advise whether all the users are not able to create the confirmation in portal. Or if there is any specific user who is not able to do that?
And I also request you to advise whether you going to do the invoice in SRM portal in classic scenario?
Best Regards,
Bharathi

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works.

Unable to create delivery using ADSUBCON

Hi Gurus,
I am unable to create delivery using ADSUBCON transaction for the PO which has material with different Order Unit. My base unit of measure is EA where as the Order unit is Roll. If I delete the order unit system allows me to create delivery where the PO.
Why the system does not allow me to create the delivery when the order unit is different than base unit of measure.
Thanks in advance,
Shashidhar
Edited by: Shashidhar on Jan 29, 2011 5:19 AM

HI,
Its already been maintained.
Shashi

Unable to create confirmation

Hi,
This is in SRM 7.0 with PPS swtiched on.
I am currently unable to create confirmations or invoices for a SC or PO. This was working fine until PPS was switched on.
I saw that in the PO the indicators for follow-on documents are selected properly but when I select the PO to create a confirmation, the "Create Confirmation" button is greyed out.
Is there any additional changes I need to do for SSP currently (in addition to the normal config) since PPS is switched on now?
Thanks & Regards
Saravanan Sadasivan.

HI, Saravanan Sadasivan:
The SRM PPS scenario does not support the function (confirmation or invoice ),the following like supports my opinion :
"PPS procurement documents are created in SAP SRM, and financial processes, such as goods receipt (GR) and invoice receipt (IR), occur in SAP ERP. "
http://help.sap.com/saphelp_srm70/helpdata/en/93/7f3fc2c58f48c6bb78d1fe06c9c936/frameset.htm
Alex
Bestregards

Unable to create JVM using JNI

Hai,
I am new to java programming. I am trying to invoke native application using JVM. I have a written a pilot code in C using JNI. I am getting the following error when I try to run the binary. I think that the problem is from the fact that 1.2.2 is installed in
/usr/bin directory (and is the default on the server). But I have set both
LD_LIBRARY_PATH, PATH and path
so that it points out 1.4.2. Here is the error
unable to create JVM
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
while building the binary I am using JDK1.4.1 header and lib files
These are my compilation arguments
g++ -g -I/opt/BES/jdk/jdk1.4.1/include/ -I/opt/BES/jdk/jdk1.4.1/include/solaris/ -L/opt/BES/jdk/jdk1.4.1/jre/lib/sparc/ -ljvm -ljava jniTest.C
Help Needed
Thanks
Sunil

I haven't seen this before. Could it be a disk space issue?
Are you using JDevStudio or JDevStudioBase? And do you have your JAVA_HOME set? If you are using JDevStudio, try running JDev in a command window where JAVA_HOME is not set - I'm pretty sure JDev does NOT get confused about this but I haven't done extensive testing.
Also you should try deleting and unzipping JDev again.
Finally, search the JDev TP forum - there are some discussions there about this error and you may find an answer to your specific configuration - it doesn't seem to be a TP4 specific issue.
JDeveloper and OC4J 11g Technology Preview
Heidi.

Unable to create DC using software component

Hi,
I have created Software component, and later downloaded track into my NWDS but while I am trying to create DC using above Software Component which is in gray out.
The software component does not support the selected development component type. At least one required DC is not visible.
I am working on CE7.2, NWDS v7.2 SP04 PAT0008
Please let me know how to fix the issue. Appreciate your quick response.
Thanks in advance.
cheers
dev

Hi Dev,
Please check required dependancy for the software component which you have created for CE7.2 track and make entries in the Name reservation for custom development. Once you modify then stop/start SLD server. then in the landscape configurator, do the update CMS.
Please check all the required parameters in CMS are updated properly and you have checkin and imported component in checkin and development tab repestively in transport studio.
Best Regards,
Arun Jaiswal
Edited by: Ervin Szolke on May 17, 2011 3:23 PM

Unable to create WebService using Wizard

XML experts,
I am following the 'How to...Send XML Data to BW' guide. In Step 26, for BW 3.5, I start to create WebService using SE37 and use the Wizard. I go thru all the steps as follows:
Virtual Inteface: Myservice
Short Description: Myservice
Endpoint Type: Function Module
Check Name Mapping box
Function Module: /BI0/QI6ASENDXMLDATATOBW_RFC
Name: Myservice
Short Description: Myservice
Profile: Basic Authorization: SOAP Pro
If you select Complete, the following objects are created in the Object Navigator:
The virtual interface Mydemo
The Web service Mydemo
The address of the Web service is default_host/sap/bc/srt/rfc/sap/Mydemo
In addition, the Web service definition is released for the SOAP runtime.
To find the address of the Web service, use the transaction WSCONFIG, which supports you when you publish a Web service in the UDDI.
WHEN I PRESS COMPLETE, I get a message 'Object can only be created in SAP Package'. I SELECT OK and get the CREATE OBJECT DIRECTORY ENTRY popup for entering package info for transport.
<b>Question: Is this normal? I tried local object ($tmp) and ZBIW, but it does not take it. Says, test object cannot be created in foreign namespaces. What do I need to do to bypass this?</b>
Thanks a lot!!

Hi
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-i 1</a>
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-ii 2</a>
Regards
Abhijith Ys

Unable to create queries on portal

Hi,
We have implemented Buyer business package on portal and all the ABAP views are coming up fine. For the POWL views like "My Vendors", My Materials" there is an option to create a new query and then view the results in the table based on the query.
Now this step of creating query is coming up for a particular user. But for certain users the view shows message "No active queries" and there is no option to even create a new query.
Please let me know what authorization do I need to give in ECC so that they can get this option of creating new queries.
Regards,
Namrata

Hi,
That User may not have the authorizations on that InfoArea and MP, so check it. See SAP help on Roles and Authorizations.
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/be/076f3b6c980c3be10000000a11402f/frameset.htm
Using RSECADMIN we can define the roles and authorizations in BI 7.
See some good posting sin SDN
First define the Roles as per your business and then assign the Objects i.e. Plant . Division etc..
http://wiki.sdn.sap.com/wiki/display/BI/AnalysisAuthorizationsinBI-+approach
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
Thanks
Reddy

Creating confirmation using Purchase Order details

Hi all,
I am trying to create a confirmation for a Purchase Order in SRM Version 5,ECC 5.0(ECS Scenario).
In my program, I first get all the Purchase Orders using the function module, BBP_PD_PO_GETDETAIL. Then I want to confirm this Purchase Order in the back end and front end using some funtion module.
I have tried with the function module, BP_PD_CONF_CREATE, to create the confirmation.For this function module, I have passed the header details such as Object_id,process_type,log_system_FI ,be_log_system,
be_object_type , be_refobj_type.
I have also passed the Item,partner,account,org,longtext,pridoc and tax details of the PO as input to this function module.
On execution of this function module, I get the Confirmation number, but the confirmation does not get created in the front end as well as backend. I also tried with the following function modules,
BAPI_CONFEC_CREATE - For this function module I first tried passing the PO details as above as input but it didnt work. Then I tried passing the output of the Function module BP_PD_CONF_CREATE which had the Confirmation number, as input to BAPI_CONFEC_CREATE. It gives an error 'There has been a unexpected exception'.
I also used the following function modules,
BBP_PD_CONF_UPDATE
BBP_GOODS_MVT_CREATE
BBP_PROCDOC_CREATE
But none of them works....
Please help me if anyone has dealed with such a scenario.
Thanks,
Sowmiya M

Hello,
I am also new in SCM ICH, but may be there is no transportation line defined for this material.
Call transaction /SAPAPO/SCC_TL1 in your ICH-System or select menu Inventory Collaboration Hub - Master Data - Transportation Lane.
Create a product-specific transportation line.
I am not sure, if it's neccessary to transfer the PO once more before confirming.

Unable to create DSN using SQLConfigDataSource on windows 64bit

Hi all,
I have a 32bit application that needs to be ported and installed on to 64bit Win2k3 server.
During installation of the product, Install script is failing to create a DSN using SQLConfigDataSource API on 64bit windows2k3 server.
I installed 32 bit Oracle client(10.2) on the 64bit m/c, despite this, I am getting an error "ORA-12154: TNS:could not resolve the connect identifier specified, Driver's SQLSetConnectAttr failed"
But when I invoke odbcad32.exe from "C:\windows\syswow64\", I am able to see all 32bit drivers and I am able to create the DSN and Test the connection successfully to a 64bit ORACLE 10g DB installed on the same m/c. I am even able to connect to the same database from the COMMAND PROMPT through the command "sqlplus" with same credentials and SID.
Based on observations from the debug, I feel the Installer is picking up odbcad32.exe from "C:\windows\system32\" folder. Hence what I did was, I copied the 32 bit odbcad32.exe from "c:\windows\syswow64" folder into the above folder. At this juncture, the product Installer was able to create the DSN, but it is still failing to TEST the connection successfully and my Installer quits giving the above error.
Can somebody help me out in this regard, about how I can overcome this problem. Is there something that I am missing ?
Thanks in advance for your help.
Regards,
Murali.

Thanks for your prompt reply.
If I access the SQLPLUS from the below 3 locations and connect through the same user credentials(test/test@orcl) and same SID, the connections are successful.
C:\oracle\product\10.2.0\db_1\BIN\sqlplusw.exe(64 bit DB server)
C:\oracle\product\10.2.0\client_1\BIN\sqlplusw.exe(64 bit Client)
C:\oracle\product\10.2.0\client_2\BIN\sqlplusw.exe(32 bit Client)
The TNSNAMES.ORA file in all the below 3 locations have the same content !!
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN (64 bit DB server)
C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN (64 bit Client)
C:\oracle\product\10.2.0\client_2\NETWORK\ADMIN (32 bit Client)
Hence my concern turned over to the error details which point to " Driver's SQLSetConnectAttr failed".
When I debugged my code, I could see the SQLConfigDataSource() is getting called with params (NULL, "ODBC_ADD_SYS_DSN", "Oracle in OraClient10g_home2", "DSN=DSNTemp;UID=test;PWD=test")
The above values suggest, Oracle 32bit driver is used to create the above TEMP DSN. I think my setup's runtime is picking up 64bit ODBC DATA SOURCE ADMINISTRATOR from "C:\windows\odbcad32.exe" by default, which cannot find the specified 32 bit driver !!
Do you think my assumption is valid/true ? If so, how can I make my SETUP's runtime to pick up 32 bit ODBC DSA from "C:\windows\syswow64\odbcad32.exe"?
Can you suggest me what might create the above error(Driver's SQLSetConnectAttr failed). Do you think there is some problem with the Connection string ?
Thanks for you help,
Murali

Unable to create text using SAVE_TEXT FM

Dear Experts,
I' m trying to automaticly create a text in Create measurement Document (IK11 in PM) when notification is created . For this in program IMRC0004 on exit i put FM SAVE_TEXT but its not working as it should.
BAPI_ALM_NOTIF_CREATE & BAPI_ALM_NOTIF_SAVE is used to create notification & in order to create text SAVE_TEXT is used.
But when the document is saved the specific text is not created. In debug the FM returns with no error.
Can anyone help me?

Hi,
try to check the FM READ_TEXT by passing the same parameters used in SAVE_TEXT and check.whether read text is working.
if read text is workingthen save text is working.
and also see the parameter SAVEMODE_DIRECT import parameter in save_text if it is X it will save every tiome if it is space it will save at LUW(when Logical unit of work executes)
Prabhudas

Unable to Create Website using "Create Web Site" action component in Release Management

Hi Team,
I am trying to use Release Management to Deploy my Website along with DB in staging servers.
I have set-up 2 Staging Servers SIT & UAT Both 2012 Servers with IIS 8.5 Configured.
Defined Release Path and Release template.
Deployment Sequence is something like this :
Deployment Sequence - Server Name - Create Folder - XCopy - Create Website - Configure Website
Build is successful, drops the output to Output folder and RM gets initiated with it's work.
It creates folders as mentioned in the "Create Folder" activity.
It copies the whole content from _PublishedWebsites to the mentioned location.
It gets stuck with the "Create Website" step.
Initially I have provided details as follows :
AppPoolName
IsPreloadEnabled
IsAutoStart
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Later, I tried providing
AppPoolName DefaultAppPool
IsPreloadEnabled 1
IsAutoStart 1
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Then also no luck.
Deployment gets rejected and the error that you can see when you hover the mouse is :
Task failed with the exit code -2146232576".
No much info available with this eror code in net also.
Any help in getting this simple site created is highly appreciated.
Thanking you in advance,
Regards,
TFS Queries

Hi,
For the deployment sequence, you might need add the action of "create application pool" before creating a website.
Another method is check whether the build output can be deployed manually. If yes, then you can trobleshoot the problem in your deployment sequence and parameters. You can create the website manually and deploy your build output to the website. If you have
any other concerns about the deployment, you can also open a new thread in IIS forum for a better response.
If the issue persists, please elaborate more details about your scenario with sceenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to create integrator using webadi

Hello,
We are trying to create a custom integrator from our custom schema - XXXXX.It errors saying PER PER_289870_ADI_IFACE_FAIL : An error occurred and the interface was not created. Please check input values and try again.The same Integrator works when we run this in apps schema.Since we are on on demand we are not allowed to push any code into apps.Please advice.
Regards,
J

Hi,
Check the value of "BNE: Server Log Path" profile option, if it is set you can find the log file under this directory. Otherwise, check under $FND_TOP/log directory.
Regards,
Hussein

Unable to create file using java.io.File

I have attached my code
public boolean validateZip(MultipartFile file, List<String> files) throws Exception {
          String fileName = file.getOriginalFilename();
          File tempFile = new File("C://workspace//tempData//" + fileName);
          LOG.info("Absolute path : " + tempFile.getAbsolutePath());
          ZipFile zipFile = new ZipFile(tempFile);
          LOG.info("No of enteries in the zip : " + zipFile.size());
          //loop through the list and check if the entry is in the zip file
     }The problem is, no exception is thrown in
' File tempFile = new File("C://workspace//tempData//" + fileName);
but, a FileNotFoundException is thrown in
ZipFile zipFile = new ZipFile(tempFile);Also, it specifies the Absolute Path, but when I check there, there is no file created.
Any help is appreciated.
TIA

ok, when I debug my application for the following code :
String dir = "C:\workspace";
String fileName = file.getOriginalFilename();   // file is an instance of a multipart file
File tempFile = new File(dir, fileName);
ZipFile zipFile = new ZipFile(tempFile);it runs smooth, no issues, if I run my app, the following line throws a FileNotFoundException...
ZipFile zipFile = new ZipFile(tempFile);

Unable to create Confirmations using Portal

Similar Messages

Maybe you are looking for