Unable to Create Connection ( Connection error DA0005) in DESKI 3 TIER

Hi ,
I have strange error of connection in DESKI 3 Tier.
Work Flow:
=> Wanted to create a deski report in Three Tier( from Infoview) using specific universe.
=> When I ran query it gives me error saying Connection error DA0005( Unable to create connection)
Work around did
=> Created Webi report using same univerese reprort ran fine.
The connection is there on enterprise I don't know whats going wrong.
Can any one help me with this error
Neo.

Hi Experts ,
Any suggestions on this please
Environment : BOXI 3.1 SP3 , OS: AIX , APPS: WAS7, DB Trying to connect is DB2

Similar Messages

Error OAB-90061 unable to create connection to the remote server

hello
i have a problem with introspection: i want to introspect wls.
i installed wls on a virtual machine. zip archive, no installer.
i also installed ovab on my local virtual machine.
start ovab, conect to serverpool: ok. now i want to start a introspection. but i got only an error:
INTROSPECTION STARTED for: juriwls
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Creating local assemblybuilder.zip.
Local assemblybuilder.zip created.
Copying assemblybuilder.zip to remote machine.
Copy at 10%
Copy at 20%
Copy at 30%
Copy at 40%
Copy at 50%
Copy at 60%
Copy at 70%
Copy at 80%
Copy at 90%
Copy at 100%
Copy of assemblybuilder.zip complete.
Copying support scripts
Copy of support scripts complete
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for detail
ok may the interfaces are down: checked, ok. static ip
tied to ping each other: no problem.
nslookup: everything perfect.
firewall off on each machine!
wls is started and in runnig mode!
variables set in .bashrc
so i dont know what to do. anybody else?
thanks in advance

thanks for help
in cli i entered: system-config-securitylevel-tui quiet port=http --port=ssh
well done introspection starts ... but after a while another error occurs
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Introspection failed
Error: Error initializing the remote connection.
Caused by: OAB-90061: Unable to create connection to remote server
Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
Action:
Double click on the failed node for details.
INTROSPECTION STARTED for: juri
- remote ExecutionContext created...
Copy AssemblyBuilder to remote machine.
Copy of AssemblyBuilder is complete.
Start remote AssemblyBuilder.
Remote AssemblyBuilder is started and connected.
- START SUBMIT...
- END SUBMIT...
onProgress<juri>: started WLS dehydration (expect delays during domain template creation)
onProgress<juri>: started processing WLS configuration
onProgress<juri>: creating appliances for the servers in the domain
onProgress<juri>: Processor: 0 completed
onProgress<juri>: capturing application deployment plans
onProgress<juri>: determining the list of application deployments
onProgress<juri>: building target map
onProgress<juri>: Processor: 1 completed
onProgress<juri>: capturing cluster configuration
onProgress<juri>: building list of all clusters
onProgress<juri>: building cluster sub-assemblies
onProgress<juri>: Processor: 2 completed
onProgress<juri>: capturing Coherence Java option configuration
onProgress<juri>: processing setDomainEnv.sh
onProgress<juri>: processing config.xml
onProgress<juri>: adding rehydration scripts
onProgress<juri>: Processor: 3 completed
onProgress<juri>: creating package definition for domain
onProgress<juri>: Processor: 4 completed
onProgress<juri>: processing inputs/outputs
onProgress<juri>: Processor: 5 completed
onProgress<juri>: capturing data source configuration
onProgress<juri>: Processor: 6 completed
onProgress<juri>: start jms message bridge processing
onProgress<juri>: Processor: 7 completed
onProgress<juri>: start ldap processing
onProgress<juri>: Processor: 8 completed
onProgress<juri>: start listen address processing
onProgress<juri>: Processor: 9 completed
onProgress<juri>: capturing node manager configuration
onProgress<juri>: Processor: 10 completed
onProgress<juri>: capturing oracle home
onProgress<juri>: Processor: 11 completed
onProgress<juri>: validating truststore configuration
onProgress<juri>: server truststore configuration is valid
onProgress<juri>: Processor: 12 completed
onProgress<juri>: processing foreign jms connections
onProgress<juri>: Processor: 13 completed
onProgress<juri>: setting resource requirements
onProgress<juri>: Processor: 14 completed
onProgress<juri>: Processor: 15 completed
onProgress<juri>: creating appliance connections
onProgress<juri>: no managed servers found, nothing to do
onProgress<juri>: Processor: 16 completed
onProgress<juri>: capturing BAM configuration
onProgress<juri>: processing BAM managed server specific configuration files
onProgress<juri>: Processor: 17 completed
onProgress<juri>: authenticating admin credentials
onProgress<juri>: admin credentials authenticated
onProgress<juri>: Processor: 18 completed
onProgress<juri>: exporting security configuration
onProgress<juri>: Processor: 19 completed
onProgress<juri>: capturing file store configuration
onProgress<juri>: Processor: 20 completed
onProgress<juri>: adding ready metric data to appliance
onProgress<juri>: Processor: 21 completed
onProgress<juri>: adding contentdata to appliances+
onProgress<juri>: creating common resources
onProgress<juri>: adding admin server resources to appliance AdminServer
onProgress<juri>: adding appliance resources
onProgress<juri>: Processor: 22 completed
INTROSPECTION DONE for: juri
Introspection failed
Error: OAB-50002: Failed to create assembly for WLS domain.
Caused by: OAB-50042: Domain template creation failed.
Action: Check /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18246.out and /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18247.log for details. These log files will be on the remote system if this is a remote introspection. This problem must be resolved before introspection can succeed.
ok lets check these log files: cat on these logs.
these logs are EMPTY!!!
i dont know what to do now ...

Unable to create connection to Application Server Control from JDev

Hi All,
I am unable to create connection to Application Server Control of SOA Suite from JDeveloper and getting following error:
Error getting OC4J Process for: opmn-home+oc4j-<hostname>-<OPMN Port>-default:
Error connecting to OPMN (is it running?): Connection refused: connect
I restarted all OPMN processes...still getting the same error.
Thanks
Krrish

Hi.
I got a similar error sometime ago.
It was related to OPMN not getting bound to the correct server IP. It happened because my SOA Suite was installed in one machine that does not have a fixed IP (or uses loopback adapter) and then I tried to connect to this SOA Suite from another machine, using JDev.
I checked this by running "opmnctl debug". then you can see on what IP the opmn is listening on.
Didn't know how to solve this.

Module: AppleODClientLDAP - unable to open connection to LDAP server - unable to create connection context

Hi everybody,
I'm running in an urgent problem, because binding to my OpenDirectory got lost. I've lots of "Module: AppleODClientLDAP - unable to open connection to LDAP server - unable to create connection context" messages in the system.log and OD service stoppped running. In the OD-section no server is listed any longer and all buttons are greyed. All network users for sure are not available, but all other services are up. I didn't changed anything to the existing services but started with the netinstall config. I got the following entries in the systemlog
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: server name macminiserver.homenet
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: interface en0: ip 192.168.0.11 mask 255.255.255.0
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: subnets: Failed to convert 'domain_search': Empty array
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: bsdpd: re-reading configuration
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: bsdpd: shadow file size will be set to 48 megabytes
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: bsdpd: age time 00:15:00
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: bsdpd: no NetBoot images found
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: bootpd: NetBoot service turned off
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: DHCP REQUEST [en0]: 1,0:1b:77:36:47:f6 <NB01>
Jun 19 00:35:30 macminiserver.homenet bootpd[95005]: ACK sent NB01 192.168.0.107 pktsize 304
Since these logentries appeared, no network users and groups are available anymore. I'm running OS X ML 10.8.3 and DNS is fine.
Are there any steps to perform to get LDAP working again? With all buttons in the server admin OD section greyed out I even can't setup a new directory.
BR
Jens

I was able to restore the existing server with the automatic OD backup that Server.app creates. When my OD fails to start after a crash and db_recover commands don't work, it's always worked for me to restore the odmaster from a backup using the command:
sudo slapconfig -restoredb /private/var/backups/ServerBackup_OpenDirectoryMaster.sparseimage
I'm careful to keep an independent OD backup with Carbon Copy Cloner and this preflight script.
You can also grab an earlier version of the sparse image ServerBackup_OpenDirectoryMaster.sparseimage from a Time Machine backup. It's also possible to rsync the database files directory from a Time Machine backup.

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

"unable to create *file name*" error

I imported videos from ipod touch to iphoto. Then i try to export the videos on either desktop or external hard-drive and it gives me the "unable to create *file name*" error in both cases. To export videos i go FIle-Export, choose kind "original". Tried to do it with several different albums, and it doesn't work on any of them. Didn't have an issue for exporting pictures though.
Please help!
Nina

What exactly was selected when you did the test?
Regards
TD

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

Unable to create Application. Error No: -2147024891

Hi,
I am trying to create an application in Hyperion Planning Version 4.0.1
Even though I have followed the exact instructions in Oracle Installation Guide, I keep getting following error.
Unable to create Application.
Error No: -2147024891
Kindly suggest, how can I troubleshoot for this.
PS. I have gone through the posts on same topic but that did not helped me.
Regards,
Jitendra

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Unable to create connection to the Oracle Java Cloud server

Hi All,
I am trying to deploy simple ADF application to Oracle Cloud.
I am successfully transfered HR schema to my database cloud service and now am trying to create a connection to the oracle java cloud service instance
but it is failing to create a connection to the cloud server and throwing the error message
Testing Cloud-Admin ... failed.
listApplications failed.
Check username, password, domain, instance.
Check cloud sdk location & version: Tools->Preferences->Oracle Cloud
0 of 1 tests successful.
MyService details are as follows
JDEV : Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229
Cloud version: 13.2.2.0.0
I am pretty sure , i am using proper credentials since am able to java cloud service console with same credentials.
Please help me out on this.
Thanks

Hi Thanks for the reply
I check check-box of proxy settings and restarted the jdeveloper and tried again but still it throws the same error? one doubt here...what all we need to include / exclude in our proxy settings...
and the I tried providing service name as both java and javatrial8477 but no luck i followed the same steps which are mentioned in the below document
Part 2: Deploying ADF Applications to Oracle Java Cloud
Do i need to do any other configuration? Or i can directly deploy my ear file to java service console rt instead of creating connection tot the server from IDE.
Regards,
Kotresh

Creating connection error?

hey all, i have created an application which when run through eclipse works 100% as expected. but when exported as a .jar i recieve an error from conecting to the database in question.
String URL = "jdbc:mysql://82.110.105.79:3306/web79-j-clarkhou", username = "*****", password = "********";
               try {
                    Class.forName("com.mysql.jdbc.Driver").newInstance();
                    con = DriverManager.getConnection(URL, username, password);i have narrowed it down to the above 3 lines, the URL string is 100% correct so im guessing its either not finding my driver or cannot create the connection help please ?

I will gladly show you the code nested between them two areas, but i can assure you that the code is never reached. the application does not even make the connection. i have manually tested this by printing out after every command as it wasnt throwing any error
Connection con = null;
               String URL = "jdbc:mysql://82.110.105.79:3306/web79-j-clarkhou", username = "****", password = "******";
               try {
                    Class.forName("com.mysql.jdbc.Driver").newInstance();
                    con = DriverManager.getConnection(URL, username, password);
                    if (!con.isClosed()) {
                         mainAddNote("DATABASE # Successfully connected to "
                                   + "MySQL server using TCP/IP");
                    Statement stmt = con.createStatement();
                    /* Load customer list */
                    ResultSet rs = stmt.executeQuery("SELECT * FROM `Customers`");
                    while (rs.next()) {
                         Customer cust = new Customer();
                         cust.customerID = rs.getInt("customerID");
                         cust.firstName = rs.getString("firstName");
                         cust.lastName = rs.getString("lastName");
                         cust.houseNumber = rs.getString("houseNumber");
                         cust.postCode = rs.getString("postCode");
                         cust.telephone = rs.getString("telephone");
                         customer.addCustomer(cust);
                    rs.close();
                    /* Load buy list */
                    rs = stmt.executeQuery("SELECT * FROM `Buy`");
                    while (rs.next()) {
                         Buy trans = new Buy();
                         trans.transID = rs.getInt("transID");
                         trans.staffID = rs.getInt("staffID");
                         trans.vehicleID = rs.getInt("vehicleID");
                         trans.customerID = rs.getInt("customerID");
                         trans.date = inputValidation.dateConvert(rs
                                   .getString("date"));
                         trans.isPrivate = inputValidation.stringToBoolean(rs
                                   .getString("isPrivate"));
                         trans.boughtPrice = rs.getDouble("boughtPrice");
                         buy.addBuy(trans);
                    rs.close();
                    /* Load Sell list */
                    rs = stmt.executeQuery("SELECT * FROM `Sell`");
                    while (rs.next()) {
                         Sell trans = new Sell();
                         trans.transID = rs.getInt("transID");
                         trans.staffID = rs.getInt("staffID");
                         trans.vehicleID = rs.getInt("vehicleID");
                         trans.customerID = rs.getInt("customerID");
                         trans.date = inputValidation.dateConvert(rs
                                   .getString("date"));
                         trans.isPrivate = inputValidation.stringToBoolean(rs
                                   .getString("isPrivate"));
                         trans.soldPrice = rs.getDouble("soldPrice");
                         trans.warranty = inputValidation.dateConvert(rs
                                   .getString("Warranty"));
                         trans.isNew = Boolean.parseBoolean(rs.getString("isNew"));
                         sell.addSell(trans);
                    rs.close();
                    /* Load Service list */
                    rs = stmt.executeQuery("SELECT * FROM `Service`");
                    while (rs.next()) {
                         Service serv = new Service();
                         serv.serviceID = rs.getInt("ServiceID");
                         serv.customerID = rs.getInt("CustomerID");
                         serv.vehicleID = rs.getInt("VehicleID");
                         serv.date = inputValidation.dateConvert(rs
                                   .getString("Date"));
                         serv.confirmed = inputValidation.stringToBoolean(rs
                                   .getString("Confirmed"));
                         serv.cost = rs.getDouble("Cost");
                         serv.notes = rs.getString("Notes");
                         services.addService(serv);
                    rs.close();
                    /* Load Staff list */
                    rs = stmt.executeQuery("SELECT * FROM `Staff`");
                    while (rs.next()) {
                         Staff staffMem = new Staff();
                         staffMem.staffID = rs.getInt("staffID");
                         staffMem.password = rs.getString("password");
                         staffMem.staffID = rs.getInt("staffID");
                         staffMem.firstName = rs.getString("firstName");
                         staffMem.lastName = rs.getString("lastName");
                         staffMem.isSenior = inputValidation.stringToBoolean(rs
                                   .getString("isSenior"));
                         staffMem.wage = rs.getDouble("wage");
                         staffMem.houseNumber = rs.getString("houseNumber");
                         staffMem.postCode = rs.getString("postCode");
                         staffMem.telephone = rs.getString("telephone");
                         staff.addStaff(staffMem);
                    rs.close();
                    /* Load Vehicle ID's for FTP download */
                    rs = stmt.executeQuery("SELECT `vehicleID` FROM `Vehicles`");
                    rs.last(); // move to last record so a count can be initiated
                    int id[] = new int[rs.getRow()];
                    rs.first(); // return to first record
                    while (rs.next()) {
                         id[rs.getRow() - 1] = rs.getInt("vehicleID");
                    rs.close();
                    /* Download images to temp directory */
                    Ftp.downloadAll(id);
                    /* Load Vehicles list */
                    rs = stmt.executeQuery("SELECT * FROM `Vehicles`");
                    while (rs.next()) {
                         Vehicle car = new Vehicle();
                         car.vehicleID = rs.getInt("vehicleID");
                         car.make = rs.getString("make");
                         car.model = rs.getString("model");
                         car.engine = rs.getDouble("engine");
                         car.reg = rs.getString("reg");
                         car.yearMade = Integer.parseInt(rs.getString("yearMade"));
                         car.fuel = Integer.parseInt(rs.getString("fuel"));
                         car.mileage = rs.getInt("mileage");
                         car.bodyType = rs.getInt("bodyType");
                         car.isSold = inputValidation.stringToBoolean(rs
                                   .getString("isSold"));
                         car.salePrice = rs.getDouble("price");
                         car.colour = rs.getString("colour");
                         car.comment = rs.getString("comment");
                         if (new File("vehImg/" + car.getVehicleID() + ".jpg")
                                   .exists()) {
                              car.image = ImageIO.read(new File("vehImg/"
                                        + car.getVehicleID() + ".jpg"));
                         } else {
                              car.image = null;
                         vehicle.addVehicles(car);
                    rs.close();
                    break;
               } catch (Exception e) {
                    System.out.println("Exception : " + e.getMessage());
                    System.out.println("Stack trace: " + e.getStackTrace());
                    System.out.println("Cause      : " + e.getCause());
                    Object[] options = { "Retry", "Exit" };
                    Component frame = null;
                    okFlag = JOptionPane
                              .showOptionDialog(
                                        frame,
                                        "There has been an error connecting to the database.\n"
                                                  + "Please check that you are connected to the internet",
                                        "Connection Error", JOptionPane.YES_NO_OPTION,
                                        JOptionPane.WARNING_MESSAGE, null, options,
                                        options[0]);
               } finally {
                    try {
                         if (con != null) {
                              con.close();
                    } catch (SQLException e) {
                    mainAddNote("DATABASE # All lists loaded!");
               }

Unable to open connection error

Hi All,
   I have a report that is connecting to two ODBC DSN connections. Using Crystal Reports 2008 it opens fine and generates reports (we did this even on the Crystal Server using CR 2008).
   When we load this report onto the Crystal Reports Server 2008 Server and try to open it using InfoView, it gives a message "Unable to open connection". Does anyone have any ideas to get it to work on the CR Server 2008? It is a very basic report with 2 ODBC connections. The driver for the ODBC connection is installed on the Server and was tested successfully with Crystal Reports just not with Crystal Reports Server 2008.
   Thank you in advance.

Used System DSN instead of User DSN

Disk Utility "Unable to create" Disk Image "error -39"

I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
When I do the same on my computer, the process completes fine.
What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
PowerBook G4 Mac OS X (10.4.5)

I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
I'll try to confirm all of this in the next few days and report my findings.

Unable to Create Connection ( Connection error DA0005) in DESKI 3 TIER

Similar Messages

Maybe you are looking for