Unable to create content area item for RDF-report

According to white paper "Security tips in Oracle Reports Services (release 6i with Portal 3.0)" I'm trying to integrate an Oracle Reports 6i RDF-module in my portal.
All goes well including running the report from de reports definition file.
However, when I want to create an item in the content area referencing the report, the report-application is not visible in the lov Application Components. The only aplication component I'm offered is "PEOPLE_APP: People".
Perhaps the following problems are related to this problem:
1) When looking for applications in the Portal Navigator, the report-application is missing in the applications list. However, after using the Find...-option the application is shown. Should report-definitions been shown ?
2) After installing rwwwvins.sql the package body WWV_RW_SB is invalid with errormessage "PLS-00306: wrong number or types of arguments in call to SET_SSO_SESSION".
Can anybody help ?

One problem solved...
It appears that I should have stated the application as "Expose as Provider". After doing that the report appeared in the lov.
Unfortunately one problem still remains. The package WWV_RW_SB has errors causing the parameterform to fail. I've rerun the rwwwvins-script but the package body stays invalid.

Similar Messages

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Por

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port-Printer. The Adobe PDF Printer may be unavailable. I'm using the original CD to set up

And on what system? Acrobat 7 is not compatible with Windows 7, if that's what you are using. You need to upgrade then.
Mylenium

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

Automatic upload of content area items from the O/S

I wish to automate the upload of content area items into the portal. Can this be done via the PDK or otherwise?
I have a number of PDF and HTML reports that get generated and placed into a physical directory on the server. I want all these files from a specific directory to be uploaded as items into the portal automatically so that users can view the reports with appropriate security. The reports can be modified so that when run they insert a record into a custom table to store their path and file names. This can be used by a custom procedure to point to the files at the point of upload.
However, can this upload actually be done?
Any ideas on how to do this would be useful.
Regards,
John

Physical path on the database server.
Using the api to upload is easy as long as you provide the content-area id, folder-id, display-name, item-type (PORTAL30.WWSBR_API.ITEM_TYPE_FILE), content-area type id (PORTAL30.WWSBR_API.SHARED_OBJECTS), folder-region-id (whatever it is for Regular Items, you'll find it in wwsbr_all_folder_regions) and the physical file-name.

Unable to create SASL client connection for authentication mechanism [PLAIN

I have problem to use dscc to admin my ds/dps servers, since I the dscc can't contact dscc agent. Though the agent is running on the default port number with network-bind-port of 0.0.0.0, there is nothing I can do to fix it.
I debug the problem, and found following errors in server.log under dscc (deployed on SUN AS 8.2):
Message: Unable to create SASL client connection for authentication mechanism [PLAIN]|#]
[#|2007-08-21T15:28:40.252-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.SASLClientHandler.initialize(SASLClientHandler.java:124)|#]
[#|2007-08-21T15:28:40.253-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:131)|#]
[#|2007-08-21T15:28:40.254-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)|#]
[#|2007-08-21T15:28:40.256-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)|#]
[#|2007-08-21T15:28:40.257-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)|#]
[#|2007-08-21T15:28:40.258-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)|#]
[#|2007-08-21T15:28:40.260-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getJmxConnector(NquickClient.java:816)|#]
[#|2007-08-21T15:28:40.261-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnector(NquickClient.java:519)|#]
[#|2007-08-21T15:28:40.262-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnectorSystemAuthentication(NquickClient.java:314)|#]
[#|2007-08-21T15:28:40.263-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool.getSyncServerMBean(NquickPool.java:435)|#]
[#|2007-08-21T15:28:40.264-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool$1.run(NquickPool.java:320)|#]
[#|2007-08-21T15:28:40.271-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | java.lang.Thread.run(Thread.java:534)|#]
[#|2007-08-21T15:28:40.289-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageTitleAlertAndText | Node has no attributes.|#]
[#|2007-08-21T15:28:40.293-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageActions | Could not obtain pageactions element.|#]
[#|2007-08-21T15:28:40.295-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageViewsMenu | Could not obtain pageviews element.|#]
Please help if you could figure out what's going on. Thanks!

Bug ID: 6551672
Synopsis: SunAS claims "Unable to create SASL client conn for auth mechanism" and do not talk to Cacao
Work Around:
Work arround:
Change the JVM of used by App Server.
Edit the file:
     /usr/appserver/config/asenv.conf
and replace
     AS_JAVA="/usr/j2se"
by
     AS_JAVA="/usr/java"
Then restart your AS domain.

BEA-002606 Unable to create a server socket for listening on channel

Hi,
I am trying to stand up JDEVELOPER suite 11.1.2 on Windows 7 64 Bit.
When I sreate a sample app and try to compile, I get the error:
<Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.56.101 might be incorrect or another process is using port 7102: java.net.BindException: Cannot assign requested address: JVM_Bind.>
This IP is not active on my machine, although it was initialized at one point through a VBox instance I installed. I have tried to clean off the VBOX instance and the JDEVELOPER, rebooting between loads. Can anyone help me get what look like a ghost IP off my machine. Note: I set the weblogic server to port 8003, so I am also not sure why itis looking at port 7002.
Thanks
JT

It is the integrated server. I have taken everything off (JDev adn VBOX) and cleaned some of the hard to find file structures just to make sure there wasn't a hidden config file I was missing.
I am new to Web Logic, so I was hoping to get the integrated server running first and then learn the ins and outs of deployment to a production system.

HT4436 I m unable to create an apple id for iCloud as its showing that the limit for creating a free id has been exceeded

I m unable to create an apple id for iCloud as its showing that the limit for creating a free id is no longer available on your device

Yes. On the other iPhone go to Settings>iCloud, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud. Any data being synced with iCloud on this phone will be deleted from it when you delete the account, but will sync back with you sign back in later.
After deleting the account, set up a new one with a different Apple ID. Then delete this account from the phone and sign back into the original account to sync the iCloud data back to this phone. You can then go to the other phone (the one that doesn't have any remaining accounts on it) and sign into the new account you just created on your other phone using the ID you used to create it.

How do i create 2 parameter pages for 1 report?

Hi,
I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
my difficulty is how do i create 2 parameter page for 1 report?
thank you

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How to create a z-tcode for a report in FSI3 transaction

hi friends,
i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and report is not getting executed. kindly help.
regards,
nagarajan.j

Hi,
follow these steps:
1. enter into transaction SE43 and change any Z area menu (we won't save it anyway)
2. choose to add a new entry
3. in the popup, choose to add a new report
4. select "Drilldown"
5. the application class depends on the area from you are trying to define/launch drilldown reports. In case of transaction FSI3, the appropriate application class is "FBR FI:FIS - Balance sheet, balance sheet key figures
6. then choose the suitable report type. This corresponds to the nodes that you'll see in transaction FSI3
7. finally choose a report, and optionally a variant.
8. you'll return to the screen "Transaction code for reports" (same as in step 4)
9. expand the button to display further options
10. optionally, specify a custom transaction code and/or description
11. accept all popups. This will create the transaction
12. finally, exit and don't save the area menu
I hope this helps. Kind regards,
Alvaro

Is it possibel to create one connection [pool for one report only

Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
Thanks,

Hi,
Why do u want seperate connectionpool for that single report?
I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
Regards,
Srikanth

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How to create a user parameter for a report

Hi,
I am writing a report in ORACLE 6.0, and I need to create a user
parameter for my report.
My database includes fields: item_id, item_cost, and item_desc.
What I want to do is: set up a user parameter for item_cost, and
the report will prompt the user to enter number into this
parameter, then the report will display item_id and item_desc
depending the user-entered item_cost.
thanks.
Jun

My SQL code is below:
select item_id, item_invo, item_desc
from tb_item
where item_invo=:p_1
but I got an error message:
REP-0788:Warning: The value of restricted LOV parameter p_1 is
not among the selectedble values.
Would you help me again? Thanks.
Jun

Create a Transaction code for a Report

Hi
I have created a report through report painter. How can i create a transaction code for the report.
Thanks
J

Hi,
T.Code: SE93 - Maintain Transaction
Transaction Code = Zxxxxxx
Click on Create.
Short Text = Name of Report
Click on the radio button for 'Transaction with Parameters'
Press Enter.
Transaction = GR55
Parameters Window...
Screen Field : Screen field can be viewed in technical information screen of the report group to which report belongs for which t.code is to created.
Value: Report Group
Click on Save.
Now you have a custom transaction for the report(s) in a report group.
Hope this helps.
Please assign points to say thanks.

[svn:fx-trunk] 14462: Quick fix to ensure total byte counts are accurate for -size-report.

Revision: 14462
Revision: 14462
Author:   [email protected]
Date:     2010-02-26 14:11:20 -0800 (Fri, 26 Feb 2010)
Log Message:
Quick fix to ensure total byte counts are accurate for -size-report.
QE notes: None
Doc notes: None
Bugs: SDK-25600
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25600
Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SizeReport.java

If this is textual input (as in a CSV file), you wouldn't use a DataInputStream or DataOutputStream. Use FileReader and FileWriter objects instead.
Actually, unless this is a homework assignment that tells you to write it yourself, you should just use a library that can parse and format CSV files and just use that.
My battle plan is to count the number of rows and commas. I would then use these counts in my subsequent loops. Why? What is the purpose of those counts?
Personally, I'd suggest that you start by writing a method that does the changes you need on a single line of input. (The changes you describe sound like they can all happen on a per-line basis.) Write lots of unit tests to try out various inputs and that you get the correct outputs, given the changes you say you need on a given line.
When you're done with that and have it working perfectly, then you can write the code to read a file, loop through it, call the method that fixes a single line, and then output that line.

Unable to create content area item for RDF-report

Similar Messages

Maybe you are looking for