Unable to Create Contract Templates In Other Business Units In Fusion Contract Management

Hi All.
I am working on Fusion PPM Release 9.
I Have set Profile Options HZ_DEFAULT_BU_CRM to SH-Business Unit & HZ_ENABLE_MULTIPLE_BU_CRM to Yes in task Manage Administrator Profile Values.
But LOV is showing only SH-Business Unit. I am not able to get other Business Units In LOV & Not able to create contract Template.
Any help regarding above issue is Appreciable 
Thanks
Shaan

Hi Vara,
Check the basic settings for Student Contract accounting. Are you using "Create RFC Destination for Automatic Creation and Update" functionality? Please check that whether you have maintained any RFC or not. If yes, then remove that.
The automatic creation function causes the system to automatically create a student account with the account-specific master data when it creates student master data. Check this in SAP_CM_ACCOUNT_DATA_UPDATE.
The automatic update function causes the system to automatically update the relevant account data when it updates account-specific student master data.
You can activate and deactivate the automatic creation and change function. You make this setting in the IMG activity (De)Activate Automatic Student Account Creation and Update.
Regards
Vinod Kumar

Similar Messages

  • Create a customer in several business units

    Hi SD experts,
    Is there any option in SAP to create a customer in several business units, simultaneously, without being obliged to do it manually ?
    regards,
    Bahia.

    Dear Bahia,
    Could you please explain whats a "Business Unit"?
    As in Standard SAP terminolgy, I've not heard Business Unit.
    Best Regards,
    Amit.
    Note: Are you reffering to Sales Area or Business Area?

  • Outlook Integration: unable to create snapshot templates.

    Dear all,
    I followed all the steps mentioned in note 861055
    "You can easily repeat the step of template creation after running the server installation:
       1. Start the Addon Outlook Integration from Business one.
       2. Choose/Administration/Outlook Integration/Define Snapshot Templates
       3. Select "Create Default Templates" from the "Goto" menu. This will repeat the procedure that could not be started because of the missing layout files."
    But when I choose "Create Default Templates" nothing happens...
    I'm using SBO 2005A SP01 PL31 and Outlook Integration PL60.
    Also, what's the difference between the OIStandAlone and the OutlookIntegration files?
    Best Regards,
    Vítor
    Message was edited by:
            Vitor Vieira

    Hello,
    This issue is really interesting, I really desperate to install it. I read the note and find out that server installation must be run before initialisation of addon in the client workstation. Initialisation means addon registration. I just think the template will be created in the client workstation if the server installation has run. Both must be run. But here the explanation I've got from pdf file :
    Template Layout Files for Microsoft Outlook Integration Snapshots
    The SAP Business One Add-On Server Installer copies the template layout files for snapshots in the following subfolder in <B1DIR>: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default. However, if the SAP Business One 2005 SP01 application is not a new installation but an upgrade, the name of the subfolder is the same as for SAP Business One 2004.
    In the Default folder, there are language-specific folders for all templates. After you complete the registration of the Microsoft Outlook add-on on your server and begin the initialization in a company database from a client, the add-on creates default templates for the current language of the company to which you are logged on. These default layout files are also stored in <B1DIR> in the following subfolder: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default. When you later use the add-on to create additional default templates (by using the Create Default Templates function of the add-on), your default templates are also stored in: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default.
    However, if the application is unable to locate this folder or the folder cannot be created, a selection window will allow you to select a different location. This path will be stored in the company settings of the Microsoft Outlook Integration add-on and can be changed by you. The default layout files for the company are copied to the Default subfolder of the folder you select.
    The OIStandalone is a standalone installer for the Microsoft Outlook Integration add-on. This tool allows you to install the add-on without having to install the SAP Business One client on your PC. The alternative installer is appropriate for scenarios in which the SAP Business One client is not installed on the same PC as Microsoft Outlook. An example of such a scenario is the use of the Terminal Server for SAP Business One.
    If you have tried, let me know the result.
    Rgds,

  • Global Procurement by one business unit and recevied by other business unit

    Dear All
    I am going to implement centralized procurement, in which one business unit will buy the item and shipped directly to
    requesting business unit by the supplier.
    Will you please send me any setup document beside the one that is in metalink called Global Procurement.
    Thanks in advance for your help
    [email protected]
    Edited by: user12193359 on 02-ago-2012 7:06

    Hi
    If you are using inventory, costing is used automatically.
    IF you are using Purchasing, you receive the goods in inventory, so the costing kicks in automatically
    I have a document for global centralized procurement which shall help you.
    Let me know if you need it
    Regards
    emm

  • How to get access to a business Unit in Fusion Sales Cloud for Incentive compensation user

    Hi all,
    We are setting up a new environment and we do not seem to get access to the Business Unit.
    We have all the roles necessary and have access to the required screens but cannot populate any data as the business Unit DropDown is not showing any values.
    Any help is appreciated.

    I don't think the IT Security Manager role is going to help you in the Incentive Comp plan UI.
    This is a screenshot from my test environment where I have these two roles for the business unit "IC Performance Test".  I am not an IC expert and this was set up a couple of years ago, so I don't recall all the details.  I have pinged the IC team to comment on this.
    Thanks,
    Oliver
    Fusion Apps Developer Relations
    https://blogs.oracle.com/fadevrel

  • Unable to create new connection using SAP Business One

    Hi all,
    I am unable to make a connection using the new SAP Business One connetion provided with the 8.8 release of SAP Business One Crystal Report Integration Package.
    There are no Companies available to select from.  When I try to manually type in the company name, the logon fails.  If I then press "Cancel", I get a message that Crystal reports encountered a problem and needs to close.  The details of the error refers to the following DLL: crdb_b1.dll.
    The connection is successful from another PC that only has the Client installed (and uses the License server on our server, which also contains the databases.)
    I have a local installation with my own license server.  I am not even able to connect to the database on my local PC.
    Please can anyone explain why this isn't working?
    Regards,
    Rikard

    Hi Rikard,
    You may get better help if you post your question to the Business One forum. I can' t move your post.
    Thank you
    Don

  • Unable to create VM template

    Hi Folks,
    I am trying to create a VM template from an existing VM on the host machine.  I keep getting an error (2903)  VMM could not locate the file/folder \\...\VMMLibrary\..\VMxyz.vhdx on the abc server.     The system cannot find
    the specified file.     
    The VM was created in Hyper-V on server 2012 R2 and is a generate 1 VM using a VHD  (its just a simple VM with 4gb memory and a 60GB disk).  I'm not sure why there is a reference to a VHDX.
    Its SCVMM 2012 R2.
    Does anyone have an idea what the real issue might be?
    Regards
    Andy

    Output of Adminserver.log :
    ####<Mar 23, 2015 12:57:57 PM PDT> <Info> <Common> <rac11gr2.example.com> <AdminServer> <Odof Tcp Client Thread: /127.0.0.1:54321/541> <<anonymous>> <> <0000Kl80bpq3n3WjLxZR8A1L46BN000002> <1427140677283> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "1" are available and "0" are unavailable.>
    ####<Mar 23, 2015 12:58:05 PM PDT> <Info> <Health> <rac11gr2.example.com> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <9e364e94b90406d2:33c960d3:14c48021b6b:-8000-000000000000000c> <1427140685606> <WL-310002> <48% of the total memory in the server is free>
    Hmmm.... Not much info there methinks
    Hi Michal.
    In answer to your q's :
    - Do your servers have "Utility" role checked? Where can I check this. I'm new to the world of OVM tmanagers, servers and templates so very much a learning curve for me here.
    - What kind of repository you are using (nfs, ocfs, local)?: - NFS
    - Is your repository presented to these servers? Yep

  • Disk Utility Error - Unable to Create....

    Hey everybody,
    I've been having a **** of a time creating disk images...
    When trying to create a disk image on the Mac HD I get the error...
    "Unable to create {disk name here}, Resource Busy"... tried everything, closing down everyhting, rebooting ect. Still get same error.
    When I try to create on another external HD I get the error...
    "invalid argument".
    Anyone figure this one out and how to fix?
    Thank you

    Hello,
    I think this might have something to do with Onyx messing with Idisk utility settings.
    the utility does not allow me to specify a disk image size, so it's trying to turn the entire hard drive into a disk image.
    I had to re-install the operating system and it fixed it.
    However, when I installed and ran Onyx the same problem has showed up.
    In onyx I reverted the parameters back to default, but it didn't fix it. I still cannot specify the disk image size.
    I don't want to have to re-install the operating system again. Does anyone know a fix? Is it possible to just install the idisk utility and not the operating system?
    thanks

  • Unable to Create PO

    Is there a way to tell the System that WE ARE NOT TRYING TO CREATE A LOCAL PO & We would want to create the PO in ECC directly?
    Inorder to execute the below code & skip the First Block of the Below code & Perform the Second Block.
    Second Block is PERFORM CLASSIC_LIGHT_PRICING.
    In debugging mode i_object_type is having value "BUS2201" & C_PO is having value "BUS2201", So the control enters the first part of the below code & RAISES THE ERROR.
    Code from Function Module "BBP_PDPRC_UPDATE" :
    IF i_object_type = c_po.
    PERFORM error_message USING c_msgty_a gc_msgid_bbp_pd
    gc_prc_msg_simplpricepo gc_no.
    ELSE.
    PERFORM classic_light_pricing
    TABLES it_pridoc
    USING i_com
    i_p_guid i_inp_guid
    CHANGING e_com
    ev_price_unit.
    ENDIF.
    --> Are there some relavent Notes to resolve this issue?

    Hello,
    Small Update....
    Our scenarios is:
    SC -> Sourcing -> RFx -> RFx Response -> PO in ERP (
    Directly create PO in ERP )
    We are able to successfully create the below scenario.
    PR in ECC --> Get PR in SRM --> Start Collective processing -> Transfer to Central System (SC is created for the PR @ this time) --> Create RFx --> Rfx Response --> Create PO. (PO is created in ERP, Classic Scenario)
    We are able to get the PR & we are able to create SC successfully and the PR/ SC is available in Sourcing cocpit.
    Able to create RFx --> Rfx Response.
    Now once the RFx Response is Accepted --> We go for creating PO.
    The same error. We are unable to create PO.
    The error is due to pricing - debugged and checked as mentioned in my earlier message.
    Kindly Suggest.
    Unable to Create PO
    Regards.

  • Assign Chief Position to custom OM Object Business Unit

    Hello
    Is it recommended or doable to assign chief position via 012 relationship to the top most custom object Business  Unit. Currently the  chief position relationships is for Org Units. We would like to keep Chief Position to OU, also if possible to create similar 012 relationship to Business Unit. Since Business Unit will have one-to-many relationship with Regions, need is to identify chief position for the Business Unit for reporting purposes.
    Evaluation path for Business Unit - Region - OU - Position - Person.
    Thank you.

    yes, in om structure it will be seen as top most OM object business unit (top most)  region --> o.u. --> position --> person. Can I use 012 relationship of position assigned to top most business unit and keep 012 position relationship to OU.?
    Narrowing down. Currently, chief position relationship is assigned to top OU that is tied to region 1:1 relationship. Now with the new top most custom object business unit has many regions. So need to identify top most region tied to business unit via 012 position.
    Is it possible and how?

  • Unable to create service central contract items

    Hi Experts
    We are in SRM 7 EHP 2 ECC 6 EHP 6
    We are unable to create Central Contract with Service.
    There is no "Outline" or "Service" on drop down from ADD LINE in Central Contract.
    Please help urgently.
    Thanks
    Ajit

    Hi Ajit,
    Please check if hierarchy template HIER_SE is assigned to this contract transaction type in the following customizing.
    spro -> SRM Server -> Cross-Application Basic Settings -> Service Procurement Activate Service Procurement
    Also SM34: /SAPPSSRM/VC_HT -> Assign to Transaction Type
    Best regards,
    Wendy

  • Unable to create Business System with role Integration Server

    hi Experts,
    we are unable to create a BS with role of integration server, its throwing error with internal server 500.
    please advise. we do not have any issues while creating TS with role of WEBASABAP.
    thanks and regards,
    Kesava
    Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

    Hi Kesava,
    what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
    The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
    If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
    best regards,
    Markus

  • Unable to create a business service from a jca file

    I have taken a jca file of a file adapter from Oracle JDeveloper and I am trying to create a business service though eclipse for OSB.
    But I am unable to create a business service as the jca protocol is NOT available in the "Transport Configuration" section of a business service.
    I have got OSB 11.1.1.3 and wls 10.3.3.0 installed along with the corresponding integrated eclipse(oepe_11gR1PS2).
    Pls suggest!

    Refer this for the solution
    Business service NOT getting configured from jca file in Windows 7

  • Unable to create Business Partner in CRM

    Hi I am unable to Create a Business Partner (BP)in CRM though I could  see that the INBOUND  IDOC ( Msg type : CRMXIF_PARTNER_SAVE_M ) is getting posted.I created the IDOC through the test transaction (we19).Also i dont have any data to give in the field PARTNER_GUID without which the IDOC was failing.So i took an existing value from the table BUT000 and used it and it posted successfully but still the BP is not getting created in the system.Request you to pls suggest a solution..

    Kanth,
    You dont have to populate BP IDOC with partner guid.System generates partner GUID whenever BP is created.
    Try to create a BP without populating guid.
    Thanks,
    Thirumala.

  • Unable to create Human Task and Business Rule in JDeveloper

    Hello,
    I am unable to create Human Task or business rule in my JDev... am getting below error in Feedback tab.
    Previously reported error [NoSuchMethodError in o.mds.internal.dt.config.NamespaceConfigBuilder:397]
    And Below is the message log trace.
    Oct 15, 2012 12:58:51 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
    WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
    Oct 15, 2012 12:58:51 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
    WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.
    Oct 15, 2012 12:58:51 PM oracle.jps.common
    WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: line 3 column 19.
    Any idea/suggestions would be greatly helpful.
    Thanks,
    Sudheer

    Its due to JDeveloper installation or cache issue...
    I uninstalled completely and installed again. I am able to create Human Task now. Maybe it helps someone.
    -Sudheer

Maybe you are looking for