Unable to Create customer in TCA SETUP(functional)
Hi Eperts,
when iam creating a customer i am getting this error "provide a positve integer for minimum customer balance amount or percent when balance amount overdue type is amount(in r12)
Thanks,
kumar
Hi,
I have seen another OTN thread on this issue : Re: Creation of customer in R12.(version:12.1.1)-Getting Error
Similar Messages
-
Unable to create custom phone labels for new contacts since the upgrade
I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.
If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Unable to create Customer master in ECC 6
Hii Gurus
I am unable to create customer master in ECC 6 version as system says that sales area defined even though it is defined. if i am going to XD01 when i click on All sales area Button it is showing only sales organisaiton and rest distribution channel and division is not appearing. is there any activation required for distribution channels or at divisions so that i can appear in avalible sales area.
i have tried to enter it manually but it is not accepting. when i check at enterprise structure it is defined and assinged
can any body help me oout?
thanks in advance
surHello,
This is an issue by non-assigning on common distribution channel and common division.
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Distribution channel (Txn : VOR1).
Give you distribution channel to the fields Reference distribution channle for conditions and Reference DC for customer and material masters
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Division (Txn : VOR2)
Maintian Common division 00 agaist your sales org as well as the fields Reference Division for conditions and Reference Division for customer and material masters
Prase -
Unable to create custom analytic in dashboard builder
Hi Gurus
i am currently working on businessobjects edge standard but i am unable to create custom analytic in dashboard builder.it gives me the error like there is no xcelsius template available consult xcelsius
i would really appreciate your help
regards and thanks
Abid paul
Edited by: Abid Husssain Paul on Aug 24, 2009 7:45 AMHi Abid,
I would suggest you open the entry on the forum of BO Edge / Businessobjects Enterprise. this forum is about the SAP Integration Kit.
Ingo -
Unable to create custom analytic in dashboard and analytics in infoview
Hi all,
i am unable to create a custom analytic in dashboard and analytics in infoview, the error i am getting is there is no xcelsius template available consult xcelsius .
Need help ?
regards
Abid PaulHello Falk,
thanks for the reply
this is not the error i am getting in Xcelsius.but this is the error which i am getting in INFOVIEW BO edge standard 3.1 when i am trying to create custom analytic in corporate dashboard FROM INFOVIEW.
THE error i am getting is there are no xcelsius templates availabe consult xcelsius.
i would really appreciate if you could help me regarding this
Regards and thanks
ABID PAUL -
Unable to Create Customer Profile at Site Level
Hello All,
I am working on R12 Customer Conversions.
As part of this, i am trying to load the customer profile amounts at levels. 1. Account Level 2. Site Level
At Account Level, When ever i create a new account defaultly a new record is creating in hz_customer_profiles for the account_id. And i am passing 'cust_account_profile_id' to the hz_customer_profile_v2pub.create_cust_profile_amt. And able to do create customer profile amounts successfully.
But
At the Site level, when ever i create a new site, its NOT creating a record in HZ_CUSTOMER_PROFILES. If it creates i can have this 'CUST_ACCOUNT_PROFILE_ID' and pass it to the API
but its not doing so.
Could you please tell is there any setup for Creating HZ_CUSTOMER_PROFILES while creating SITE Use.
Please help me in this.
Thank you,
AushHi Aush,
There is not specific setup for the same. You might not using the APIs correctly. Did you use hz_cust_account_site_v2pub.create_cust_acct_site API to create site? Once you create the site, you need to defined the site use using api, hz_cust_account_site_v2pub.create_cust_site_use. This Site use api will insert the record into HZ_CUSTOMER_PROFILES for the site record.
Once you create the site use, then you can define the profile amount using hz_customer_profile_v2pub.create_cust_profile_am API. Hope this is helps you.
- Kiran -
How to create customer By using SD_CUSTOMER_MAINTAIN_ALL function module
Hello all,
I want to create customer By passing( T_CUST_HIER_IP - customer no, account group, company code, distribution channel, division, name1, search team, city, country).
using BAPI or function module I am using SD_CUSTOMER_MAINTAIN_ALL
LOOP AT T_CUST_HIER_IP INTO W_CUST_HIER_IP.
MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNA1.
MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNB1.
MOVE-CORRESPONDING W_CUST_HIER_IP TO W_KNVV.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
I_KNA1 = W_KNA1
I_KNB1 = W_KNB1
I_KNVV = W_KNVV.
ENDLOOP
But it gives error SALES_AREA_NOT_VALID.Hi,
Check in TVKO and TVTA master tables, for Sales Area (Sales OrganizationDistribution ChannelDivision) is vaild or not..
If no entreis availble , it will raise the exception SALES_AREA_NOT_VALID.
-somesh
reward points if it is helpful -
Hi,
I am getting the following message while creating customer for act group with external no. assignment.
"Act group xxxx uses ext no. assignment. specify and account number"
And please briefly explain about internal and external no. assignment.
Thanks and Regards,
VenkatHello,
Here the account group of sold-to-party uses external number assignment, so you need to specify a number for the customer master (externally).
If you want to make it as internal then:
Go to SPRO --> Financial Accounting --> Account receivable and payable --> Customer accounts --> Preparations --> number ranges , you can see the external number range is checked, you need to uncheck it. aftert that the system will create the customer with internal number.
Prase -
Problems Creating Custom Skin w/ further functionality
Hello,
To add that final piece to my project i have been attempting to modify the controls within the flash files located in the program files. I have been successful in editing the look without any problems, but that isn't the end of my plan. I have been attempting to create a "full screen mode" button for my captivate project. As of now i have a button widget that i have created with the appropriate code to make this happen. But i am having some problems it doesn't fit our layout very well. So to fix this i'm wanting to add an additional button into the theme template swf. After looking through the files though i'm unable to locate AS3 class features that show functionality. Or any linkage to point me in an appropriate direction to make my changes/addition. If any of you have any experience in this or if there is just no way to add this feature without an extensive amount of work. Any information would help.
I am using Adobe Captivate 5 as well as Flash CS5, if there's any more info you need i will gladly provide it.
Thank youMarcos,
I am trying to create new site template and getting below error for wcshell:panel.
"No grammer available for namespace http://xmlns.oracle.com/webcenter/shell, content of element panel cannot be validated"
Do you know which JSP Tag Libraries i need to add?
Thanks
JP -
Unable to create partition after RAID setup failure
SL - Tried to create RAID 1 with two external 250G drives. The RAID setup failed indicating improper format pair. So....I attempted to re-create the partition on one of the drives with proper settings.
It will not partition at all. It returns a POSIX error: unable to allocate memory.
I've tried the following:
Using startup disk
Partitioning using WindowsXP (which worked....only for Windows)
Tried erasing
Tried to partition with each partition type.
Nothing works! However, when I restart SL, it pops open a window indicating the drive needs to be 'initialized'. I click 'initialize' button, but that doesn't help.Do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Are you trying to create a RAID using partitions on hard drives or using the entire drive? -
Unable to create Customer in Accounts Receivable
Hi,
I am using Oracle Applications : 12.0.4. I that I am trying to create a customer, But the system is flaging the follwoing error.
FND_SESSION_MANAGEMENT.UPDATESESSIONCONTEXT SQLException: java.sql.SQLException: OALL8 is in an inconsistent state
Could some one help me out in resolving the issue.
Thanks,
VijendraIn Release 12.0.4:
Please check and do the necessary entry of the Customer Address, with the proper state, county, city, and province., because in R12 it is become mandatory and address need to be checked.
this information may helps.
Regards,
NSrikanth -
Unable to create Custom Attributes
I just recently did an install of EPM 11.1.2.3. When I go to add custom attribute in Planning under entity I get an error stating "An error occurred while processing this page". I have uninstalled and re-installed about 3-4 times and still get the same message. I had no problem with release 11.1.2.0, 11.1.2.2.
Maybe related, but when I add a member to the Period dimension I get the message "The member you selected does not exist", but it adds the member anyway. Clicking on help result in error 404--Not Found.
Diagnostic only reveal "Failed REG:Registry -- PROJECT (id: 168ab7c3ac0344677a37fbee13f1c5e7dc3S7fc8):"APPLICATION" child missed
Any ideas?
ThanksHi,
Whatever steps you have done seems to be correct for adding an UDF in Create User page. If the UDF is not displayed, then refresh the content by clicking the refresh icon at the top right hand corner of the dialog box while selecting Add Content -> "Data component - catalog" -> userVO. Also I would suggest you to give an unique name while creating the UDF using form designer in sysadmin console. Try it again and it should work.
In worst case try the below steps
1. Create and activate a Sandbox.
2. On the left nav pane, expand Upgrade and click on link Upgrade User Form.
3. On the page that opens, the table will display all your UDFs. Click Upgrade Now and wait for completion.
4. Export(recommended) and Publish the sandbox.
After that create another sandbox in identity console,create sandbox, click on customize and after that try following the same process of adding from userVO -
Unable to create PivotChart from build in function in PowerPivot
Hello,
I am trying to create Pivot chart from the ribbon in Power Pivot, but receive the following message:
Unable to get the PivotTable property of the Range class
============================
Call Stack:
============================
Server stack trace:
Exception rethrown at [0]:
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at Microsoft.AnalysisServices.XLHost.Addin.GeminiRibbon.InsertPivot(String connectionString, String cubeName, MultiObjectsReportType reportType)
I tried to do it with the file which I downloaded from tutorial on MS site "ContosoSales", if has access database which I downloaded in PowerPivot and it worked with this file, but does not work with any PowerPivot files I create myself which linked
to excel file as I do not have any database software on my computer. I can create a Pivot chart manually linking it from Excel sheet to Pivot table but wanted it to be working when i need quickly create dashboard with several charts.
Thanks
NataliaHi Natalia,
I would like to collect more information to troubleshoot this issue. Please help to collect the following information:
What're the versions of SQL Server PowerPivot for Excel and SQL Server?
What's the underlying data source for your PowerPivot data model.
Is this issue only occured for you?
Currently, please refer to the following actions to deal with this issue:
Please try to reinstall PowerPivot for Excel to see if this helps. If so, please install the latest PowerPivot version.
We can design a small PowerPivot data model to perform a test to reproduce this issue. Please let us know the result.
Hope this helps.
Regards,
Elvis Long
TechNet Community Support -
Unable to create Custom Datasource on AFRU -Invalid extract structure error
Hello folks,
All SDN experts I need urgent help with an issue here.I am trying to create a custom datasource on a view on AFRU table.But i am getting this error 'Invalid extract structure template ZAFRU_V ' , i know it could be cuz of the field SMENG which is refrenced to AFVV tables MEINH field.My boss needs to have this field.I would like to know what can i do to get it, do i need to write a user exit, will that help or not. Please tell me what to do.
Thanks,i tried what you asked me to do, this was my joing condition
AFRU MANDT = AFVV MANDT
AFRU AUFPL = AFVV AUFPL
AFRU APLZL = AFVV APLZL
But then what i ran into was if the counter (APLZL) was 0 or blank it wouldnt get that data for me.That means i will loose hundreds or thousands of records if they have confirmation and routing number of ops in order but no counter.Please assist.
And to answer is open so please any one who sees this and knows the answer please reply.
Thanks. -
Unable to create custom B2C application
Hi
I am trying to create a custom B2C application via NWDS .
The track is ready , all the SCAs including the CUSTCRMPRJ are available in NWDS
But as I say right click and say Create New DC in CUSTCRMPRJ , the name dropdown shows blank.
If you click finish it says "Invalid name :appropriate prefix not found;choose another name or name server.Hi sumit singh ,
did you create a dc name prefix in your SLD? If so is your SLD server up and running? Name reservation acitve?
Please let us know. So far the information you provided is a little thin imho to make a good guess about what is going on.
Thank you
Jan
Maybe you are looking for
-
ITunes 6.0.1.3 crashes often when importing cds -- help!
I just installed iTunes 6.0.1.3 for the first time on my PC since I have it already on my iMac. It crashes fairly consistently when importing CDs. It seems basically useless on my Windows machine. My import settings are: 320kbps/VBR-highest/normal st
-
Why don,t external hard drives go to sleep using Mavericks?
Since I have downloaded Mavericks, external hard drives will not go to sleep when putting the computer to sleep using a FireWire connection. I have found out that external hard drives will go to sleep using a USB cable. It seems that talking to the f
-
Is there a way to apply changes in default WAD template to KM Bookmarks?
Hi gurus. WE ran into the following issue. We have bunch of portal favorites and km bookmarks saved by the users from our BEx Web Analyzer reports. Our Bex Web utilizes a default template 0ANALYSIS_PATTERN (renamed to ZZ..). We have made some customi
-
hello everyone. i'm trying to free up space on my hard drive. what is the easiest way to find and delete duplicate photos and files. specifically in iphoto. thank you.
-
before i ok'd your update, on my internet i had yahoo as my ISP appear on the page prior to going to another www. now it comes up with mozilla, instead and I WANT TO RETURN TO YAHOO. am sorry i am not computer literate, so i dont really know how to e