Unable to create customer

Hi,
I am getting the following message while creating customer for act group with external no. assignment.
"Act group xxxx uses ext no. assignment. specify and account number"
And please briefly explain about internal and external no. assignment.
Thanks and Regards,
Venkat

Hello,
Here the account group of sold-to-party uses external number assignment, so you need to specify a number for the customer master (externally).
If you want to make it as internal then:
Go to SPRO --> Financial Accounting --> Account receivable and payable --> Customer accounts --> Preparations --> number ranges , you can see the external number range is checked, you need to uncheck it. aftert that the system will create the customer with internal number.
Prase

Similar Messages

Unable to create Customer master in ECC 6

Hii Gurus
I am unable to create customer master in ECC 6 version as system says that sales area defined even though it is defined. if i am going to XD01 when i click on All sales area Button it is showing only sales organisaiton and rest distribution channel and division is not appearing. is there any activation required for distribution channels or at divisions so that i can appear in avalible sales area.
i have tried to enter it manually but it is not accepting. when i check at enterprise structure it is defined and assinged
can any body help me oout?
thanks in advance
sur

Hello,
This is an issue by non-assigning on common distribution channel and common division.
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Distribution channel (Txn : VOR1).
Give you distribution channel to the fields Reference distribution channle for conditions and Reference DC for customer and material masters
Go to SPRO --> Sales & Distribution --> Masterdata --> Define Common Division (Txn : VOR2)
Maintian Common division 00 agaist your sales org as well as the fields Reference Division for conditions and Reference Division for customer and material masters
Prase

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Unable to create custom analytic in dashboard builder

Hi Gurus
i am currently working on businessobjects edge standard but i am unable to create custom analytic in dashboard builder.it gives me the error like there is no xcelsius template available consult xcelsius
i would really appreciate your help
regards and thanks
Abid paul
Edited by: Abid Husssain Paul on Aug 24, 2009 7:45 AM

Hi Abid,
I would suggest you open the entry on the forum of BO Edge / Businessobjects Enterprise. this forum is about the SAP Integration Kit.
Ingo

Unable to create custom analytic in dashboard and analytics in infoview

Hi all,
i am unable to create a custom analytic in dashboard and analytics in infoview, the error i am getting is there is no xcelsius template available consult xcelsius .
Need help ?
regards
Abid Paul

Hello Falk,
thanks for the reply
this is not the error i am getting in Xcelsius.but this is the error which i am getting in INFOVIEW BO edge standard 3.1 when i am trying to create custom analytic in corporate dashboard FROM INFOVIEW.
THE error i am getting is there are no xcelsius templates availabe consult xcelsius.
i would really appreciate if you could help me regarding this
Regards and thanks
ABID PAUL

Unable to Create Customer Profile at Site Level

Hello All,
I am working on R12 Customer Conversions.
As part of this, i am trying to load the customer profile amounts at levels. 1. Account Level 2. Site Level
At Account Level, When ever i create a new account defaultly a new record is creating in hz_customer_profiles for the account_id. And i am passing 'cust_account_profile_id' to the hz_customer_profile_v2pub.create_cust_profile_amt. And able to do create customer profile amounts successfully.
But
At the Site level, when ever i create a new site, its NOT creating a record in HZ_CUSTOMER_PROFILES. If it creates i can have this 'CUST_ACCOUNT_PROFILE_ID' and pass it to the API
but its not doing so.
Could you please tell is there any setup for Creating HZ_CUSTOMER_PROFILES while creating SITE Use.
Please help me in this.
Thank you,
Aush

Hi Aush,
There is not specific setup for the same. You might not using the APIs correctly. Did you use hz_cust_account_site_v2pub.create_cust_acct_site API to create site? Once you create the site, you need to defined the site use using api, hz_cust_account_site_v2pub.create_cust_site_use. This Site use api will insert the record into HZ_CUSTOMER_PROFILES for the site record.
Once you create the site use, then you can define the profile amount using hz_customer_profile_v2pub.create_cust_profile_am API. Hope this is helps you.
- Kiran

Unable to create Customer in Accounts Receivable

Hi,
I am using Oracle Applications : 12.0.4. I that I am trying to create a customer, But the system is flaging the follwoing error.
FND_SESSION_MANAGEMENT.UPDATESESSIONCONTEXT SQLException: java.sql.SQLException: OALL8 is in an inconsistent state
Could some one help me out in resolving the issue.
Thanks,
Vijendra

In Release 12.0.4:
Please check and do the necessary entry of the Customer Address, with the proper state, county, city, and province., because in R12 it is become mandatory and address need to be checked.
this information may helps.
Regards,
NSrikanth

Unable to create Custom Attributes

I just recently did an install of EPM 11.1.2.3. When I go to add custom attribute in Planning under entity I get an error stating "An error occurred while processing this page". I have uninstalled and re-installed about 3-4 times and still get the same message. I had no problem with release 11.1.2.0, 11.1.2.2.
Maybe related, but when I add a member to the Period dimension I get the message "The member you selected does not exist", but it adds the member anyway. Clicking on help result in error 404--Not Found.
Diagnostic only reveal "Failed REG:Registry -- PROJECT (id: 168ab7c3ac0344677a37fbee13f1c5e7dc3S7fc8):"APPLICATION" child missed
Any ideas?
Thanks

Hi,
Whatever steps you have done seems to be correct for adding an UDF in Create User page. If the UDF is not displayed, then refresh the content by clicking the refresh icon at the top right hand corner of the dialog box while selecting Add Content -> "Data component - catalog" -> userVO. Also I would suggest you to give an unique name while creating the UDF using form designer in sysadmin console. Try it again and it should work.
In worst case try the below steps
1. Create and activate a Sandbox.
2. On the left nav pane, expand Upgrade and click on link Upgrade User Form.
3. On the page that opens, the table will display all your UDFs. Click Upgrade Now and wait for completion.
4. Export(recommended) and Publish the sandbox.
After that create another sandbox in identity console,create sandbox, click on customize and after that try following the same process of adding from userVO

Unable to Create customer in TCA SETUP(functional)

Hi Eperts,
when iam creating a customer i am getting this error "provide a positve integer for minimum customer balance amount or percent when balance amount overdue type is amount(in r12)
Thanks,
kumar

Hi,
I have seen another OTN thread on this issue : Re: Creation of customer in R12.(version:12.1.1)-Getting Error

Unable to create Custom Datasource on AFRU -Invalid extract structure error

Hello folks,
All SDN experts I need urgent help with an issue here.I am trying to create a custom datasource on a view on AFRU table.But i am getting this error 'Invalid extract structure template ZAFRU_V ' , i know it could be cuz of the field SMENG which is refrenced to AFVV tables MEINH field.My boss needs to have this field.I would like to know what can i do to get it, do i need to write a user exit, will that help or not. Please tell me what to do.
Thanks,

i tried what you asked me to do, this was my joing condition
AFRU     MANDT     =     AFVV     MANDT
AFRU     AUFPL     =     AFVV     AUFPL
AFRU     APLZL     =     AFVV     APLZL
But then what i ran into was if the counter (APLZL) was 0 or blank it wouldnt get that data for me.That means i will loose hundreds or thousands of records if they have confirmation and routing number of ops in order but no counter.Please assist.
And to answer is open so please any one who sees this and knows the answer please reply.
Thanks.

Unable to create custom B2C application

Hi
I am trying to create a custom B2C application via NWDS .
The track is ready , all the SCAs including the CUSTCRMPRJ are available in NWDS
But as I say right click and say Create New DC in CUSTCRMPRJ , the name dropdown shows blank.
If you click finish it says "Invalid name :appropriate prefix not found;choose another name or name server.

Hi sumit singh ,
did you create a dc name prefix in your SLD? If so is your SLD server up and running? Name reservation acitve?
Please let us know. So far the information you provided is a little thin imho to make a good guess about what is going on.
Thank you
Jan

Unable to create custom analytic from infoview in dashboard and anlaytics

Hi all
i am getting the error in INFOVIEW BO edge standard 3.1 when i am trying to click on the settings button on the custom analytic in corporate dashboard FROM INFOVIEW.
THE error i am getting is there are no xcelsius templates availabe consult xcelsius.
i would really appreciate if you could help me regarding this
Regards and thanks
ABID PAUL

HI Ingo,
you are absolutely right .i need to solve this issue
could you please help me out as i was following your blogs as well while installing the edge standard 3.1 ...
i would really appreciate if could help me in solving this error
Regards
Abid Paul

Error While Creating Customer Account Site.

Hi ,
I am creating a customer thru API's.
I am succesffuly creating location,party,party site,party site use,customer account.But unable to create customer account site. I am getting the below error:
Unable to process your transaction. The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
Could anyone help me to resolve out this issue.

Hi,
What is the application release?
Did you set the Application/Multi-org context properly before using this API?
Note: 732671.1 - 'Change PO API' Errors with 'Multi-Org profile options' as Org Context Is Not Set Correctly
Note: 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code
Note: 209185.1 - How To Set the Applications Context (FND_GLOBAL.APPS_INITIALIZE)
Regards,
Hussein

Unable to create a QUEUE in custom schema

Hi,
I was able to create a Type & queue table in custom schema, but using them was unable to create a QUEUE in custom schema
I'm using the following piece
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
Whereas in APPS schema I'm able to create the same queue.
Pls advice ...

Hi,
The only reason is that, we create all the custom objects (owner as custom schema), and a synonym in APPS.
I did not get any error, but the queue, is not getting created
Following are the scripts used
CREATE OR REPLACE TYPE 'XXXXXX_QUEUE_TYPE
AS OBJECT (TYPE VARCHAR2(15));
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE (queue_table => 'XXXXXX_QUEUE_TABLE',
queue_payload_type => 'XXXXXX_QUEUE_TYPE'
END;
BEGIN
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
END;
BEGIN
DBMS_AQADM.START_QUEUE(queue_name => 'XXXXXX_QUEUE'
END;
Thanks.....

Unable to Create a Customer in Accounts Receivable

Hi,
I am unable to create a customer in Accounts Receivable module (in Ver 12.0.04). I am getting the following error message.
FND_SESSION_MANAGEMENT.UPDATESESSIONCONTEXT SQLException: java.sql.SQLException: OALL8 is in an inconsistent state
Could some one help me on resloving the issue.
Thanks
Vijendra

hi
USE tcode <b>VD01</b> in order to create a customer for SD which will have sales area data.
for centrally itis XD01
regards

Unable to create customer

Similar Messages

Maybe you are looking for