Unable to create Database for new planning Application
Hi all,
I have Created a New planning application on Planning 11.1.1.3 using workspace.
When i'm trying to create a database through administration -> Manage Database , im getting error saying
com.hyperion.planning.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
I tried Unlocking the application, using HspUnlockApp.cmd and it is returning a error, and im also unable find the HSP_LOCK Table
Please let me know ur suggestions
Thanks in Advance
Edited by: Rao on Aug 8, 2010 8:57 PM
Hi,
There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
FR reports not working for new planning application
Situation:
Hyperion 9.2.0
New planning application created and also registered to share services. One existing group have role assigned as 'Interactive User' and not able to perform operations on workspace (FR), FR Studio and Smart view. (Note: Admin can perform such activities and there is no error.)
Key user receiving mention below messages while accessing FR report from workspace and using FR studio for particular report related to only new application. The existing FR reports on different planning application working fine working fine from workspace and FR studio. Here are the errors:
*Workspace Error [Only for new application report]*
[Wed Aug 24 15:04:35 2011]Local////Error(1051440) Analytical Services user [abcd] Authentication Fails against the Shared Services Server with Error [Failed to authenticate user abcd against provider Native Directory]
*FR Studio [Only for new application report]*
Error connecting to database connection XYZ: [Wed Aug 24 15:08:50 2011]<Server Name///abcd/Error(1051025) User abcd is not permitted to access application XYZ
Smart View Error (Only for new application connection)
Cannot open cube view. OLAP Error (1051025): User abcd is not permitted to access application XYZ.
Analysis
While looking Essbase, I identified that under security (User/Groups), group that have access as interactive user is not listed. Only I can see the groups that have admin roles. However I can see all other planning application successfully displayed groups associated to particular question.
Please help to resolve the issue. I am new to this concept, so the detailed level description will help me lot
Thanks
Edited by: user10070515 on Aug 25, 2011 4:25 AMHi
Thanks For the replies.
After the data is copied into the layout. User is changing the values of few key figures and saving. A new line item is created in the cube with the new values.
Ex
Cust ....qty.....Value....Revenue
c100....10........100.....1000
Changing the value in layout
Cust ....qty.....Value....Revenue
c100....10........150.....1000
After saving in the cube
Cust ....qty.....Value....Revenue
c100....10........100.....1000
c100....0........50..........0
When the user execute the report revenue is not populating correctly. And i was expecing 150 *10 = 1500. I understood the issue. Can anyone tell me how can i achieve without updating the quantity how can i get this?
Thanks
Annie -
Unable to create query for new dataset
Something weird has happened to our BI Publisher application in production. It was working fine, we could create reports and datasets and templates just fine.
Now all of a sudden when we create a new report and a new dataset the Data Set screen is no longer displaying. When we edit existing reports the Data Set screen does not display either.
Has anyone experienced this problem. We are running 10.1.3.2 in production. Our test instance was just upgraded to the 10.1.3.4 ear file on our old 10.1.3.1 Oracle Application Server.
We just now noticed it because we were going to upgrade the old 10.1.3.2 ear with the 10.1.3.4 ear like we did in test. Now we are worried that about upgrading production.FYI... the screen come up for list of values but not for paramenters
-
Unable to create a new planning application in EPM11.1.3.1
Hello Guru's
I am not able to create a new planning application in the existing environment.
In the last week i created a new application to migrate from prod to dev and it was successfull but it was failing to now for creating new app.
When i checked the database connection and the essbase connection both are fine.
I have checked the logs in the path
D:\Hyperion\deployments\WebLogic9\servers\HyperionPlanning\logs
Environment: 11.1.3.1
error:
<Jan 24, 2012 5:15:46 AM EST> <Error> <JMS> <som-epmdevapp02> <HyperionPlanning> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1327400146994> <BEA-040373> <Could not find a license for JMS. Please contact BEA to get a license.>
Cheers,
Rajcheck the logs clearly, i think schema/user doesn't have admin rights. please check with DBA team and try creating again.
If you have DB admin access, you can create new schema/user and provide Full admin privilizes to the user (even you can ask your DBA team), then create DSN & validate, then try creating new application (make sure you are giving all correct info while creating app), it should work.....if still giving any error, please let us know what's the error in front end & at the same time check the logs.....
with time stamp you tried to create application, logs will be there, check clearly you will definitly find the cause & issue. -
I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up? -
Open project was cancelled or application was unable to load database for pathname
My pc is installed with Robohelp 3x. Recently I shifted the
pc from one room to anther. Now when I attempt to open my existing
workable solution, it give me the following message: "Open project
was canceled or application was unable to load database for
<pathname>". Do I need to call for Robohelp technical
support? If yes, can someone provide me the toll free number?
Can someone pls advise?Thanks Peter, managed to get in through the link you've
given. I seriously doubt it has anything gotta do with a corrupted
project. I have 2 working projects last week but they can no longer
be opened this week.
I tried even to created an empty project from scratch. It was
created successfully but when I reopen the project, it shows the
same error message.
Could there have been other possibilities or ways which I can
troubleshoot?
*puzzled* -
Unable to Access New Planning Application via Workspace
Hi all
i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.Hi,
Did you create a new Planning app in your new environment? Can you access this new app as a test?
You will need to asociated your app with an active instance and datasource.
In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
When you configured BI+ did you make sure you ticked Planning?
Seb
www.taysols.com.au -
Created a new planning application with Admin id ..while loggin in giving error as :.....
Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator
Steps i followed :
1. created schema
2.created DSN on application servr
3.Created planning Applicaion from AppWizard plannig link
4.Application was succesfully created.
5.tried login into the plannig aplication got the boce error.
6.the application i not seen when i login with Admin id through EAS console ....
7.Applicaction is not created in essbase server also...i see in essbase server back endCheck out in shared services if the user is still provisioned with appropriate access, if not do it.
Try running updateusers utility because user dosent exists as NTLM and try creating the application again from Essbase and from Planning.
If it doesnt work then Create a new user with administrator access and In EAS refresh the security from shared services and try creating the essbase and planning applications using new admin. Check if it works.
Edited by: RahulS on Dec 2, 2010 4:12 AM -
Unable to Load Database/Unable to create database.
RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild. -
Unable to create database error
Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
ThanksThere is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Unable to create database entry in the directory service. - TNS-04
We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
Unable to create database entry in the directory service. - TNS-04409: Directory service error
We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
In the meantime, I found these errors in the oid logs:
oidldapd01.log:
2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
connection
Any ideas?
Thanks
NaiyingHi,
Thanks for update.
No, didn't find DSCC agent logs get updated when I have the pop up.
C:\dsee7\var\dcc\agent\logs
In the glassfish server log, I didn't find new transaction when I hit the issue
C:\glassfish3\glassfish\domains\domain1\logs -
We are currently on Hyperion Planning 9.2. I have created a new Planning application in my test environment. I can see the application in the Planning Desktip. I have ran the Configuration Utility on the Shared Services server and updated my Hspjshome.properties file. We have restarted the Planning server and the Planning services. However, the Hspjshome.properties file on the Planning server has not been updated. I can see the new application in the Administration console but not in Shared Services or in the Planning Web. If I register it in the console, it tells me it is already registered. What am I missing? Do I need to run the Configuration Utility on the Planning server as well. Also, do I need to restart the Shared Services server.
Thanks in advance for your help.Have you copied your updated Hspjshome.properties into the web application, sometimes it just updates the file but doesn't copy into the web application, once copied you will need to restart the planning application service.
Cheers
John
http://john-goodwin.blogspot.com/ -
Cannot export video clips. Get message: "unable to create video for export"
Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GBYes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function. -
Hi all, May i know how to create filters in Hyperion Planning Application?
Hi all, May i know how to create filters in Hyperion Planning Application?
i don't know how to create filters in Planning Application. but my superior asking me to create filters.
Thanks & Regards,
SekharGo to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
Repeat process for all access permissions.
If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
Refresh Planning including security filters
Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
Cheers
John
http://john-goodwin.blogspot.com/ -
To create req for new BOM component
hello all,
i confirm the order and now i need to add one more component to the header material for the same order.
how can i create requirement for new BOM component.
what i done is i 1st cancel the confirmation. then go for read PP mater data. after that should i run the MRP for header material to create planned order for new BOM component?
regardsDear,
If you have execute any transaction like GI confirmation then read PP master data will not work.
Best way you can cancel the confirmation and reveres the good issue by 262 movement type. Then do TECO to the order all reservation get deleted.
Then update the BOM with new component and run MRP with planning mode-3 delete and recreated. It will create planned order then convert it to production and go ahead.
Regards,
R.Brahmankar
Maybe you are looking for
-
Determine the required parameters in a VM/AssemblyInstance creation...
Oracle Enterprise Manager Cloud Control's Cloud API documentation [12.1.0.2 EM with 12.1.0.4 Cloud Service Portal Plugin|http://docs.oracle.com/cd/E24628_01/doc.121/e28814/cloud_part5.htm#sthref1171] illustrates some examples on creating VM and Assem
-
I'm looking for a good ad blocker for firefox version 31.0
Since I'm now on a new computer using Win 7 home premium, I need a new ad blocker for Firefox. When I try to open some website, nice ones, I get so many ads popping in from all directions, that I can't see the web site. Any help or suggestions apprec
-
Getting path to application associated with file type
Hello, I'm looking for a platform-independent way to get path to application associated with given file type. Desktop API introduced in JSE 1.6 seems to do this, but it only lanuches the app. Any suggestions will be apprecieted
-
Is it possible to trigger a popup from f:selectItem
I have a use case, where I have a dropdown (selectOneChoice), which shows a list of existing oracle homes, and last label gives the user an option of 'create new location'. I tried something like below: <af:selectOneChoice id="ohSelector"> <f:selectI
-
Problems with iSight and Messages
Hi there, im having problems using Messages... i dont use it very frecuently but today i wanted to use a videochat and found i cant do it. I check in preferences and have this going on in the audio/video section: if someone dont understand spanish, i