Unable to create database (Oracle 12c R1 12.1.0.1.0, Windows 2012 )

I have been trying out the new 12c on Windows 2012 Essentials with the same type of errors. The OraDim step fails and cannot create the services. It fails a bit differently if I choose "Create New Windows User", choose a "Use Existing Windows User", or choose the Windows Built-in user. It's insanely frustrating. We are looking at 12c for a new development project, but apparently it's not quite ready for Windows. I am really thankful for vmware snapshots.
Has anyone found a work around for installing a 12c database on Windows 2012?

Also, when I try to install just the software, and use the database assistant to setup the system, the oradim command fails "A new member could not be added to a local group because the member has the wrong account type."
I also found this, which shows that 2012 is not supported, yet
https://blogs.oracle.com/UPGRADE/entry/oracle_database_12c_is_available
Even though page 44 of e17735 (Oracle® Installation Database Guide 12c Release 1 (12.1) for Microsoft Windows E17735-07) states that 2012 is supported:
2.2 Oracle Database Software Requirements
Table 2–3 lists the software requirements for Oracle Database on Windows x64.
Table 2–3 Windows x64 Software Requirements
Requirement
Value
Operating System
Oracle Database for Windows x64 is supported on the following operating systems:
■Windows Server 2008 x64 and Windows Server 2008 R2 x64 - Standard, Enterprise, Datacenter, Web, and Foundation editions.
■Windows Server 2012 x64 - Standard, Datacenter, Essentials, and Foundation editions
■Windows 7 x64 - Professional, Enterprise, and Ultimate editions
■Windows 8 x64 - Pro and Enterprise editions
Note:
■Check My Oracle Support for more information about Hyper-V support.
■Windows Multilingual User Interface Pack is supported.
■The Server Core option is not supported.
See Also: "Hardware and Software Certification" for information about how to access the latest system requirements

Similar Messages

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Unable to create database entry in the directory service. - TNS-04

We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
Unable to create database entry in the directory service. - TNS-04409: Directory service error
We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
In the meantime, I found these errors in the oid logs:
oidldapd01.log:
2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
connection
Any ideas?
Thanks
Naiying

Hi,
Thanks for update.
No, didn't find DSCC agent logs get updated when I have the pop up.
C:\dsee7\var\dcc\agent\logs
In the glassfish server log, I didn't find new transaction when I hit the issue
C:\glassfish3\glassfish\domains\domain1\logs

Unable to create database error

Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
Thanks

There is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to create database on windows7 using Oracle 10g XE

please provide me the steps to create database on windows7 64bit using 10g XE

997763 wrote:
please provide me the steps to create database on windows7 64bit using 10g XEWhy 10g XE when 11g is already there?
Were you able to install the XE software correctly? If yes, you should had a working db with you already.
http://docs.oracle.com/cd/E17781_01/server.112/e18804/startup.htm#CHDGJGHB
Aman....

Unable to Create Database RH6.2 Oracle 8.1.5

I have problem creating a new database. I succeed in startup nomount the instance. I connect internal but I receive also the message
Ora 01012 Not logged on
Can you help me?
Giancarlo

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
I have problem creating a new database. I succeed in startup nomount the instance. I connect internal but I receive also the message
Ora 01012 Not logged on
Can you help me?
Giancarlo<HR></BLOCKQUOTE>
Giancarlo, did you get an answer to this question? I am experiencing it as well. It may also be related to the NLS parameter setting, as I see that error message as well. And the "create database ..." command just doesn't work.
null

Unable to Create database index

Hello All,
I have a table where I'm trying to define indexes.
I make the additional entry for indexes via SE11.
Call transaction SE11.
Enter the table ..
Choose "Change".
Choose "Indexes ...".
Choose the "Create Index" icon and enter the table name and the index name.
However when I goto SE14 to create in the database, ->
Choose "Edit".
Choose "Indexes ...".
Select the index.
Choose continue.
-> Select 'Background' as the processing type.
> Choose "Create database index".
Here, I'm unable to te database index just because it is grayed out.
I tried with user DDIC also.
Can any one help with the reason that I am unable to create it.
Thanks a lot in advance.
Regards,
Pradeep

Hello Pradeep,
Steps to create an Index
1. Goto SE11
2. Enter table name and F6(Change)
3. Select "Indexes" from the Application Tool bar
4. Select "Create Index" Option
5. Select one option
"Non-Unique index"
or
"Unique Index"
In case of a Non-Unique Index, you can use the radio buttons to define whether the index should be created for all database systems, for selected database systems or not at all in the database.
Check the proper Type of the Index in SE11 again. This should solve your problem.
Regards,
Subrahmanya P

ORA-12560 while creating database Oracle 11.1.0.6

Hi,
I tried to create a Oracle Database using Oracle installer.
I got the error ORA-12560
This is part of the logfile:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid labor -gdbName labor.world -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 818 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Can anybody help me
Operating system Windows Server 2008
Regards
siegwiin

Good morning Siegwin,
First, you should probably post to this forum: [Database - General|http://forums.oracle.com/forums/forum.jspa?forumID=61]
However, the error you are getting is a TNS error. You should check the following information in your TNSNAMES.ORA on your system and on the Database Server.
<li>Name of the database
<li>Port Number of the database as defined in the TNSNAMES - compare against the port number that the database is actually listening on
<li>The SID defined in the TNSNAMES file.
On the Database Server:
<li>Check that there is a listener running and that it is listening for your database.
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)

Unable to create database in RAC

Hi All,
I installed oracle RAC 10.2.0 on linux RHEL 4 in VMware 5.5.
The crs and oracle software are successfully installed and asm instance also create with one diskgroup, then i start dbca in first node, that time i am getting the error like this.
the current asm instance in single asm instance, if you wnat to use this asm for rac then convert the single asm indtance to RAC asm instance.
Kindly tell me how to convert it. if i try to create daatabse in node 2 that time i am getting the ora-12547.
Kindly tell me...
DEatils about the installtion
Server : VMWARE
node : RAC1 and RAC1
CRS version: 10.2.0
Oracel version: 10.2.0
OS : linux RHEL4
REgards
Senthil Kumar.

Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide 10g Release 2 (10.2) for Linux
D.3.6 Converting Single-Instance ASM to Cluster ASM
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14203/cvrt2rac.htm#BABJDAJG

Unable to create database

Hi,
dbassist gives this error while creating a database:
ORA-01012: not logged on
while in 2nd state: "Create database file" (orig. German:
"Datenbankdateien erstellen"). What did we do wrong? Forgot to
start any server forgot to free any file, something else?
Our Shell-Variables are:
#Base vars
ORACLE_BASE=/oracle/app/oracle
ORACLE_HOME=$ORACLE_BASE/product/8.1.5
NLS_LANG=WE8ISO8859P1
#NLS_LANG=$ORACLE_HOME/ocommon/admin/nls/data
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
ORA_OWNER=oracle
ORACLE_OWNER=oracle
export ORACLE_BASE ORACLE_HOME NLS_LANG ORA_NLS33
export ORA_OWNER ORACLE_OWNER
#Additionals:
PATH=$PATH:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH LD_LIBRARY_PATH
Konrad Rosenbaum (WSDB Team)
null

I had the same problem before. Apparently, it happened to me
because I was insisting on creating a db using shared server
processes (MTS). The following quote says it all:
==========================================================
Restricted Operations of the Multi-Threaded Server
Certain administrative activities cannot be performed while
connected to a dispatcher process, including shutting down or
starting an instance and
media recovery. An error message is issued if you attempt to
perform these activities while connected to a dispatcher process.
These activities are typically performed when connected with
administrator privileges. When you want to connect with
administrator privileges in a
system configured with multi-threaded servers, you must state in
your connect string that you want to use a dedicated server
process
(SRVR=DEDICATED) instead of a dispatcher process.
=======================================================
So, the answer is create a db using dedicated server processes,
and then perhaps later on change them to shared server processes.
John Salvo
WorkShop DB (guest) wrote:
: Hi,
: dbassist gives this error while creating a database:
: ORA-01012: not logged on
: while in 2nd state: "Create database file" (orig. German:
: "Datenbankdateien erstellen"). What did we do wrong? Forgot to
: start any server forgot to free any file, something else?
: Our Shell-Variables are:
: #Base vars
: ORACLE_BASE=/oracle/app/oracle
: ORACLE_HOME=$ORACLE_BASE/product/8.1.5
: NLS_LANG=WE8ISO8859P1
: #NLS_LANG=$ORACLE_HOME/ocommon/admin/nls/data
: ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
: ORA_OWNER=oracle
: ORACLE_OWNER=oracle
: export ORACLE_BASE ORACLE_HOME NLS_LANG ORA_NLS33
: export ORA_OWNER ORACLE_OWNER
: #Additionals:
: PATH=$PATH:$ORACLE_HOME/bin
: LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
: export PATH LD_LIBRARY_PATH
: Konrad Rosenbaum (WSDB Team)
null

Can't Create database Oracle XE on windows2003 !

Dear all,
After i installed Oracle XE 10g on windows2003 i will create database but i cound not see dbca .Can anybody suggest me ?
Thanks for advance
Chara

By default Oracle XE edition will create database by SID as XE and i think Xpress edition will allow you to have only one database.
Some more limitations are there with Oracle XE.
Plz refer to Oracle Documentions installed along with that.
Message was edited by:
GK Joe

Cloudscape - JSP - Unable to create database CloudscapeDB

I created a Cloudscape database in a Java program:
try {
Class.forName(COM.cloudscape.core.JDBCDriver).newInstance();
     connection = DriverManager.getConnection(jdbc:cloudscape:CloudscapeDB;create=true);
A CloudscapeDB directory is automatically created in the same directory as my
Java program. I then ran cloudview -start from the DOS prompt, opened my database, created my tables and added data.
In another Java program, I display the list of customers:
public void displayCustomers(){
try {
Class.forName("COM.cloudscape.core.JDBCDriver").newInstance();
connection = DriverManager.getConnection(jdbc:cloudscape:CloudscapeDB;create=true);
     Statement s = connection.createStatement();
     ResultSet rs = s.executeQuery("SELECT * FROM customer");
This Java program works fine, displays the data from the customer table.
I then take this same code and put in into a JSP to display the list of customers to a web page and deploy my application using the Deployment tool:
<%
try {
Class.forName(COM.cloudscape.core.JDBCDriver);
     connection = DriverManager.getConnection(jdbc:cloudscape:CloudscapeDB;create=true);
My getConnection() method throws the following SQL Error:
SqlException Error Thrown Failed to create database 'CloudscapeDB'
I am able to access the CloudscapeDB using the same driver and URL in the Database Tool but I don't know what I am doing wrong in my JSP.
In the Deployment Tool, I have configured the Driver Class as COM.cloudscape.core.JDBCDriver and the JNDI Name as jdbc/CloudscapeDB and the JDBC URL as jdbc:cloudscape:CloudscapeDB;create=true. I am not sure I even needed to do this.
Any idea why my JSP cannot create the CloudscapeDB? I believe the CLASSPATH is configured correctly because I am able to get access to the Cloudscape database in my Java program.
Any help would be greatly appreciated.

Hi, I saw your message in sun's forum. I am wondering how you g ot this issue resloved because I have a similar problem using Tomcat4.0 and cludscape 3.6. Would you please drop me a few lines and let me know your solution? I think it may be Tomcat configuration issue but just don't know how to fix it.
Thanks in advance
please reply to [email protected]
I created a Cloudscape database in a Java program:
try {
Class.forName(COM.cloudscape.core.JDBCDriver).newInsta
ce();
connection =
=
DriverManager.getConnection(jdbc:cloudscape:Cloudscape
B;create=true);
A CloudscapeDB directory is automatically created in
the same directory as my
Java program. I then ran cloudview -start from the
DOS prompt, opened my database, created my tables and
added data.
In another Java program, I display the list of
customers:
public void displayCustomers(){
try {
Class.forName("COM.cloudscape.core.JDBCDriver").newIns
ance();
connection =
DriverManager.getConnection(jdbc:cloudscape:CloudscapeD
;create=true);
     Statement s = connection.createStatement();
ResultSet rs = s.executeQuery("SELECT * FROM
OM customer");
This Java program works fine, displays the data from
the customer table.
I then take this same code and put in into a JSP to
display the list of customers to a web page and deploy
my application using the Deployment tool:
<%
try {
Class.forName(COM.cloudscape.core.JDBCDriver);
connection =
n =
DriverManager.getConnection(jdbc:cloudscape:CloudscapeD
;create=true);
My getConnection() method throws the following SQL
Error:
SqlException Error Thrown Failed to create database
'CloudscapeDB'
I am able to access the CloudscapeDB using the same
driver and URL in the Database Tool but I don't know
what I am doing wrong in my JSP.
In the Deployment Tool, I have configured the Driver
Class as COM.cloudscape.core.JDBCDriver and the JNDI
Name as jdbc/CloudscapeDB and the JDBC URL as
jdbc:cloudscape:CloudscapeDB;create=true. I am not
sure I even needed to do this.
Any idea why my JSP cannot create the CloudscapeDB? I
believe the CLASSPATH is configured correctly because
I am able to get access to the Cloudscape database in
my Java program.
Any help would be greatly appreciated.

How to install Oracle 11.2.0.4.0 Rac Database on Grid Infrastructure 12.1.0.2.0 (Windows 2012 R2)

Hi all.
This is the scenario:
I have a 2 node cluster Microsoft Windows 2012 R2 x86_64, the nodes are part of domain.
Installed Oracle 12cR1 (12.1.0.2.0) as follows:
Installation done using domain administrator named "installoracle" that has been EXPLICIT promoted to local administrator in both nodes.
One domain user named "oracle12c" with no administrator privileges neither in the domain or nodes.
Installation, after a lot of customization in the OS of the nodes, has gone ok, perfect indeed, not even a warning during runinstaller execution.
All services and resources are up & running, I have rebooted nodes and all comes back ok in place. In windows services I can see some services started with "oracle12c" user, and all windows groups: DBA, SYSKM, etc, has been created.
Now I have to install Oracle RAC database in 11gR2 version (11.2.0.4.0) to accomplish with application requirements.
So, I execute runInstaller (setup.exe) logged as administrator via domain administrator "installoracle" (the one that was able to do the smooth 12c GI installation) and the gui comes with out problems, but at 4th screen the one in which you have to choose what kind of installation you want to do (Single, RAC or RoN) I select RAC option, the gui returns error: crs is not running in the local node...
Finally, in order to deliver some database 11.2.0.4.0 for my customer, I try to do installation of SW for Single Node, I did using "installoracle". The sw has been installed in one of the nodes. Then I have created a database and I have stored datafiles in ASM (this ASM is part of 12c clusterware) and also register the 11gR2 single instance database in the Grid Infrastructure listener
So, whats next??? Why is this behavior??? I did similar installations in Linux/Solaris with no issue (well as everyone can imagine, always there are some issues, but when solved you got GI in 12c and databases in the release that you want 12c, 11g, 10g...)
Any clue?
Thanks in advance!!
Best Regards!!

To go back to old version (without changing compatible parameter), you can perform downgrade.
Instructions are available at
How to Downgrade from Database 11.2 to Previous Release (Includes 11.2.0.4 - 11.2.0.1) (Doc ID 883335.1)
In this case you will having all the data file including the new one.
But remember database may not be in the same status as before (Before upgrade). it may have invalid objects of higher version after downgrade.
Downgrade is applicable only to successfully upgraded databases. In case upgrade faced some issue, do not try downgrade there.
Your second approach it not correct. Note that each datafile header will have db version. We can not open database in normal mode when header version and binary versions are different.

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

Unable to create Database for new planning Application

Hi all,
I have Created a New planning application on Planning 11.1.1.3 using workspace.
When i'm trying to create a database through administration -> Manage Database , im getting error saying
com.hyperion.planning.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
I tried Unlocking the application, using HspUnlockApp.cmd and it is returning a error, and im also unable find the HSP_LOCK Table
Please let me know ur suggestions
Thanks in Advance
Edited by: Rao on Aug 8, 2010 8:57 PM

Hi,
There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Unable to create database (Oracle 12c R1 12.1.0.1.0, Windows 2012 )

Similar Messages

Maybe you are looking for