Unable to create DC using software component

Hi,
I have created Software component, and later downloaded track into my NWDS but while I am trying to create DC using above Software Component which is in gray out.
The software component does not support the selected development component type. At least one required DC is not visible.
I am working on CE7.2, NWDS v7.2 SP04 PAT0008
Please let me know how to fix the issue. Appreciate your quick response.
Thanks in advance.
cheers
dev

Hi Dev,
Please check required dependancy for the software component which you have created for CE7.2 track and make entries in the Name reservation for custom development. Once you modify then stop/start SLD server. then in the landscape configurator, do the update CMS.
Please check all the required parameters in CMS are updated properly and you have checkin and imported component in checkin and development tab repestively in transport studio.
Best Regards,
Arun Jaiswal
Edited by: Ervin Szolke on May 17, 2011 3:23 PM

Similar Messages

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works.

Create a new software component release in sld

hi,
i have a software component ABC whose version is 1.0 and vendor is SDN
software component: ABC
vendor: SDN
version: 1.0
now I created a new software component like
software component: ABC
vendor: SDN
version: 2.0
but in the SLD, when I check the release history tab of one software component, there is no any information about the release relation between these two software component.
Does anyone know how to make it?
Regards,
Hui

Hui,
Please check this michals weblog for any dependencies:
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
---Satish

Unable to create delivery using ADSUBCON

Hi Gurus,
I am unable to create delivery using ADSUBCON transaction for the PO which has material with different Order Unit. My base unit of measure is EA where as the Order unit is Roll. If I delete the order unit system allows me to create delivery where the PO.
Why the system does not allow me to create the delivery when the order unit is different than base unit of measure.
Thanks in advance,
Shashidhar
Edited by: Shashidhar on Jan 29, 2011 5:19 AM

HI,
Its already been maintained.
Shashi

Unable to create JVM using JNI

Hai,
I am new to java programming. I am trying to invoke native application using JVM. I have a written a pilot code in C using JNI. I am getting the following error when I try to run the binary. I think that the problem is from the fact that 1.2.2 is installed in
/usr/bin directory (and is the default on the server). But I have set both
LD_LIBRARY_PATH, PATH and path
so that it points out 1.4.2. Here is the error
unable to create JVM
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
while building the binary I am using JDK1.4.1 header and lib files
These are my compilation arguments
g++ -g -I/opt/BES/jdk/jdk1.4.1/include/ -I/opt/BES/jdk/jdk1.4.1/include/solaris/ -L/opt/BES/jdk/jdk1.4.1/jre/lib/sparc/ -ljvm -ljava jniTest.C
Help Needed
Thanks
Sunil

I haven't seen this before. Could it be a disk space issue?
Are you using JDevStudio or JDevStudioBase? And do you have your JAVA_HOME set? If you are using JDevStudio, try running JDev in a command window where JAVA_HOME is not set - I'm pretty sure JDev does NOT get confused about this but I haven't done extensive testing.
Also you should try deleting and unzipping JDev again.
Finally, search the JDev TP forum - there are some discussions there about this error and you may find an answer to your specific configuration - it doesn't seem to be a TP4 specific issue.
JDeveloper and OC4J 11g Technology Preview
Heidi.

How to Create a New Software Component

Dear All,
I am trying to prepare a list of steps to develop add-on products over SAP ECC 6.0. I was just wondering how to create a Software component for my namespace development, which I would like to assign my development package to.
Any ideas or guidance is highly appreciated.
Regards
VG

Hi VG,
I think I am just facing the same issue right now. Like you we do not want to do XI/PI development. We registered namespace and starting on developing a product based on ECC, which should be on a seperate namespace. We have read of AddOn Assembly Kit, but we don't have it for th emoment. We might have it at a later stage.
Still we would like to create an own Product and SC for shipment purposes. We created Product and SC in SLD but we are not able to select it in the SE80 dialogues of creating development objects. We haven't found away or documentation on how to sychnronize the SCs from SLD to ABAP system.
Is it possible to create SCs in the systme directly which will then show up for development objects?
Is it mandatory to have the Assembly Kit? (costs good money)
Is it possible to do all that in a later stage? (we saw it's possible to reassign SC for dev ojects)
I know it's been quite some time, I would still highly appreciate a feedback as SAP docu is very limited.
best,
Stefan

Unable to create WebService using Wizard

XML experts,
I am following the 'How to...Send XML Data to BW' guide. In Step 26, for BW 3.5, I start to create WebService using SE37 and use the Wizard. I go thru all the steps as follows:
Virtual Inteface: Myservice
Short Description: Myservice
Endpoint Type: Function Module
Check Name Mapping box
Function Module: /BI0/QI6ASENDXMLDATATOBW_RFC
Name: Myservice
Short Description: Myservice
Profile: Basic Authorization: SOAP Pro
If you select Complete, the following objects are created in the Object Navigator:
The virtual interface Mydemo
The Web service Mydemo
The address of the Web service is default_host/sap/bc/srt/rfc/sap/Mydemo
In addition, the Web service definition is released for the SOAP runtime.
To find the address of the Web service, use the transaction WSCONFIG, which supports you when you publish a Web service in the UDDI.
WHEN I PRESS COMPLETE, I get a message 'Object can only be created in SAP Package'. I SELECT OK and get the CREATE OBJECT DIRECTORY ENTRY popup for entering package info for transport.
<b>Question: Is this normal? I tried local object ($tmp) and ZBIW, but it does not take it. Says, test object cannot be created in foreign namespaces. What do I need to do to bypass this?</b>
Thanks a lot!!

Hi
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-i 1</a>
<a href="/people/baris.buyuktanir2/blog/2007/02/12/how-to-create-dynamic-configurable-web-services-easily-with-netweaver-development-components-part-ii 2</a>
Regards
Abhijith Ys

Unable to Create Website using "Create Web Site" action component in Release Management

Hi Team,
I am trying to use Release Management to Deploy my Website along with DB in staging servers.
I have set-up 2 Staging Servers SIT & UAT Both 2012 Servers with IIS 8.5 Configured.
Defined Release Path and Release template.
Deployment Sequence is something like this :
Deployment Sequence - Server Name - Create Folder - XCopy - Create Website - Configure Website
Build is successful, drops the output to Output folder and RM gets initiated with it's work.
It creates folders as mentioned in the "Create Folder" activity.
It copies the whole content from _PublishedWebsites to the mentioned location.
It gets stuck with the "Create Website" step.
Initially I have provided details as follows :
AppPoolName
IsPreloadEnabled
IsAutoStart
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Later, I tried providing
AppPoolName DefaultAppPool
IsPreloadEnabled 1
IsAutoStart 1
SiteName FabrikamSIT
PortNumber 80
PhysicalPath c:\FabrikamRM\WebSite\SIT
Then also no luck.
Deployment gets rejected and the error that you can see when you hover the mouse is :
Task failed with the exit code -2146232576".
No much info available with this eror code in net also.
Any help in getting this simple site created is highly appreciated.
Thanking you in advance,
Regards,
TFS Queries

Hi,
For the deployment sequence, you might need add the action of "create application pool" before creating a website.
Another method is check whether the build output can be deployed manually. If yes, then you can trobleshoot the problem in your deployment sequence and parameters. You can create the website manually and deploy your build output to the website. If you have
any other concerns about the deployment, you can also open a new thread in IIS forum for a better response.
If the issue persists, please elaborate more details about your scenario with sceenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HTTP logs not created when using software load balancer

This is my setup:
1. I have a server running a software load balancer - call it A
2. There are two servers clustered under A - call it X and Y
3. I am able to access the application deployed on X and Y through A.
Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
Problem is:
Let us take server X.
$ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
however has an error log.)
Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
Specifics on the setup:
1. A, X, Y - all three are OAS 10.1.3.2
2. All three are deployed on individual server machines
3. All three servers have one OC4J instance each running in them
4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
5. This *.war file is deployed on A
6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
Has anybody encountered this problem before? Or is there anything wrong
with the setup? What is the resolution for the same?
Any help is greatly appreciated.
Thank you.

Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
While the logs are not critical to the component we are working on, was just wondering why they were not being created.
As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

Unable to create Composite Application Webdynpro Component

Hi,
I am getting an error
Invalid component: componentName=com.sap.caf.core.gp.ui.visibleco.config.pattern.COConfigUIPatterns dcName=sap.com/cafcoregpuivisibleco~admin
when i click on Create callable object->Composite Application Webdynpro Component.
The DC mentioned here is not there in the deployed components.How to deploy this DC?
I am able to create other callable objects.
Regards
Rohit

Hi,
Tell me one thing that are you able to test the project from CAF service browser?
Please test it first. If it does not work then please deploy the CAF project again and test it. Then go to the GP and create the callable object. If it does not work then please let me know which version of NWDS as well as WAS are you using?
Thanks
Chandan

Unable to create DSN using SQLConfigDataSource on windows 64bit

Hi all,
I have a 32bit application that needs to be ported and installed on to 64bit Win2k3 server.
During installation of the product, Install script is failing to create a DSN using SQLConfigDataSource API on 64bit windows2k3 server.
I installed 32 bit Oracle client(10.2) on the 64bit m/c, despite this, I am getting an error "ORA-12154: TNS:could not resolve the connect identifier specified, Driver's SQLSetConnectAttr failed"
But when I invoke odbcad32.exe from "C:\windows\syswow64\", I am able to see all 32bit drivers and I am able to create the DSN and Test the connection successfully to a 64bit ORACLE 10g DB installed on the same m/c. I am even able to connect to the same database from the COMMAND PROMPT through the command "sqlplus" with same credentials and SID.
Based on observations from the debug, I feel the Installer is picking up odbcad32.exe from "C:\windows\system32\" folder. Hence what I did was, I copied the 32 bit odbcad32.exe from "c:\windows\syswow64" folder into the above folder. At this juncture, the product Installer was able to create the DSN, but it is still failing to TEST the connection successfully and my Installer quits giving the above error.
Can somebody help me out in this regard, about how I can overcome this problem. Is there something that I am missing ?
Thanks in advance for your help.
Regards,
Murali.

Thanks for your prompt reply.
If I access the SQLPLUS from the below 3 locations and connect through the same user credentials(test/test@orcl) and same SID, the connections are successful.
C:\oracle\product\10.2.0\db_1\BIN\sqlplusw.exe(64 bit DB server)
C:\oracle\product\10.2.0\client_1\BIN\sqlplusw.exe(64 bit Client)
C:\oracle\product\10.2.0\client_2\BIN\sqlplusw.exe(32 bit Client)
The TNSNAMES.ORA file in all the below 3 locations have the same content !!
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN (64 bit DB server)
C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN (64 bit Client)
C:\oracle\product\10.2.0\client_2\NETWORK\ADMIN (32 bit Client)
Hence my concern turned over to the error details which point to " Driver's SQLSetConnectAttr failed".
When I debugged my code, I could see the SQLConfigDataSource() is getting called with params (NULL, "ODBC_ADD_SYS_DSN", "Oracle in OraClient10g_home2", "DSN=DSNTemp;UID=test;PWD=test")
The above values suggest, Oracle 32bit driver is used to create the above TEMP DSN. I think my setup's runtime is picking up 64bit ODBC DATA SOURCE ADMINISTRATOR from "C:\windows\odbcad32.exe" by default, which cannot find the specified 32 bit driver !!
Do you think my assumption is valid/true ? If so, how can I make my SETUP's runtime to pick up 32 bit ODBC DSA from "C:\windows\syswow64\odbcad32.exe"?
Can you suggest me what might create the above error(Driver's SQLSetConnectAttr failed). Do you think there is some problem with the Connection string ?
Thanks for you help,
Murali

Unable to create text using SAVE_TEXT FM

Dear Experts,
I' m trying to automaticly create a text in Create measurement Document (IK11 in PM) when notification is created . For this in program IMRC0004 on exit i put FM SAVE_TEXT but its not working as it should.
BAPI_ALM_NOTIF_CREATE & BAPI_ALM_NOTIF_SAVE is used to create notification & in order to create text SAVE_TEXT is used.
But when the document is saved the specific text is not created. In debug the FM returns with no error.
Can anyone help me?

Hi,
try to check the FM READ_TEXT by passing the same parameters used in SAVE_TEXT and check.whether read text is working.
if read text is workingthen save text is working.
and also see the parameter SAVEMODE_DIRECT import parameter in save_text if it is X it will save every tiome if it is space it will save at LUW(when Logical unit of work executes)
Prabhudas

Unable to create Confirmations using Portal

Hi All,
When we are trying to create a Confirmation and trying to search for a particular PO the following error message is being shown
"No documents correspond to search criteria"
But all the POs the created in the backend.
Can anyone give a solution.
Regards,
Rahul.

Check if you have enough auth. If you are using SRM, run BBP_GET_STATUS_2 once for the relevant SC and then try. Make sure the PO is open in backend.
Regards
TGB

Unable to create integrator using webadi

Hello,
We are trying to create a custom integrator from our custom schema - XXXXX.It errors saying PER PER_289870_ADI_IFACE_FAIL : An error occurred and the interface was not created. Please check input values and try again.The same Integrator works when we run this in apps schema.Since we are on on demand we are not allowed to push any code into apps.Please advice.
Regards,
J

Hi,
Check the value of "BNE: Server Log Path" profile option, if it is set you can find the log file under this directory. Otherwise, check under $FND_TOP/log directory.
Regards,
Hussein

Unable to create file using java.io.File

I have attached my code
public boolean validateZip(MultipartFile file, List<String> files) throws Exception {
          String fileName = file.getOriginalFilename();
          File tempFile = new File("C://workspace//tempData//" + fileName);
          LOG.info("Absolute path : " + tempFile.getAbsolutePath());
          ZipFile zipFile = new ZipFile(tempFile);
          LOG.info("No of enteries in the zip : " + zipFile.size());
          //loop through the list and check if the entry is in the zip file
     }The problem is, no exception is thrown in
' File tempFile = new File("C://workspace//tempData//" + fileName);
but, a FileNotFoundException is thrown in
ZipFile zipFile = new ZipFile(tempFile);Also, it specifies the Absolute Path, but when I check there, there is no file created.
Any help is appreciated.
TIA

ok, when I debug my application for the following code :
String dir = "C:\workspace";
String fileName = file.getOriginalFilename();   // file is an instance of a multipart file
File tempFile = new File(dir, fileName);
ZipFile zipFile = new ZipFile(tempFile);it runs smooth, no issues, if I run my app, the following line throws a FileNotFoundException...
ZipFile zipFile = new ZipFile(tempFile);

Unable to create DC using software component

Similar Messages

Maybe you are looking for