Unable to create GR against PO

Hi
User xyz cannot create goods receipt for the first item from purchase order in every case.even though we could not found any error msgs in SU53.so what is the problem.
kindly advise with ur inputs.
Regards
sss

HI,
it means he is not able to do GRN only for the First items and he is able to do for all other items?
--->then in the PO at item detail tab option -->in the delivery Tab --> GR indicator  would be unchecked in PO item.
->then in the PO at item detail tab option -in the tab confirmation control> the item has a confirmation control activ -- means Deliver expected etc ..make it blank,
--->are you trying to Process for a Stock transport order ? (item category would be U
>does the PO have release strategy--> is the PO released.?
>There would be a Block og GRN maintained for the Material ,if the Quality Mangement is active for the material and vendor in the QM info record and in the PO item Level in the delivery tab.
---> IN the Material master for the item in the Purchae order at the MM03 in the Purchasing View -->Plant mat status. a blocked reson might have entered.
the above can be any one one the reason ,if you really think authorization is the not the issue or else it can be also one of the factor.
Regards
Anjanna.

Similar Messages

  • Unable to create Invoice against a Project based Purchase Order

    Hi,
    We have a scenario, wherein there is Purchase Order created against a NETWORK ACTIVITY of a PROJECT. We have created a Invoice with ref to this PO. Now we want to cancel this Invoice by creating the Credit Memo against this PO. But, while trying to create the Credit Memo, we end with the following error message:
    "Budget for WBS element XXXX/12:7777-XX-X1-Y1-Z1 was exceeded by XXXX EUR in document item 003 Ntwk actvty XXXXXXXXXXXX 00110.
    Hence unable to create the Credit Memo. Desperately looking for your response to solved this.............
    Rgds,

    Hi,
    Check the cost as on today for ur project under project itself using CJ20n & then go to CJ30 and check the Budget for ur WBS
    regds,
    CB

  • Unable to create dataset against OLAP Cube from different server

    Hi guys,
    If I load Microsoft SQL Report Builder on the BI Server, I am able to create a dataset against the OLAP Cube I created on the BI Server, however if I try to run the Report Builder from a different server I get the following error:
    "Unable to connect to data source 'MyOLAPCube'.
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 172.20.112.82:2382
    A connection cannot be made to redirector.  Ensure that 'SQL Browser' service is running."
    I have had no issues starting the SQL Browser service, however if I try to run it in console mode, I get the following error:
    'SQLBrowser: Warning: failed starting OLAP redirection services with error 1.'
    I have checked online and seen a few similar issues online however I haven't been able to resolve my issue with their resolution.
    Any help is appreciated.
    Many thanks
    Richard

    Yeah there is a firewall running on both servers, however I had opened port 2383 and was still unable to make a connection.  It is using a named instance on the server (servername/instancename) and it is configured to use port 0, so I therefore assume
    it should be using port 2383 by default?  Or as it's a named instance, is the default port 2382? Maybe it would be better to configure it to use a specific port and open the port on the firewall?
    Hi Rfla,
    As you can see on the link below
    http://technet.microsoft.com/en-us/library/ms174937(v=sql.110).aspx
    Named instances use dynamic port assignments. As the discovery service for Analysis Services, SQL Server Browser service listens on TCP port 2382 and redirects the connection request to the port currently used by Analysis Services.
    So you can open the port 2382 for Named Analysis Services Instance remote connect.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Unable to create excise invoice against the Material document

    Hi experts,
    Unable to create excise invoice against the Material document in J1IEX transaction.
    Material document is generated through quality management which movement type is 105.
    error message :
    Material document cannot be processed
    Message no. M7130
    Thanks
    SAP MM

    Steps to do GR along with excise,
    1.Capture excise invoice using J1IEX.
    2. Refer excise invoice no. in MIGO(SAP not recommends to post excise invoice against 105 mvmt against blocked stock)
    3. Post excise invoice using J1IEX

  • Unable to create node /home/ SID adm with type directory

    I am currently experiencing a problem when trying to install a Java Stack onto my new SCM 7.0  EHP1 server.
    I receive the error:
    System call failed.  Error 89......mkdir..../home/djdadm....
    (djd is the SID of my new Java AS)
    This is followed by an error:
    Unable to create node /home/djdadm with type directory
    We have Solaris v10 (SPARC), and the ABAP stack has already been installed successfully.
    The user djdadm was created manually on solaris before starting the installation (assigned to groups sapsys, dba, sapinst + oper) and the home directory "/usr/sap/DJD/home" was specified. 
    Note the difference in the home directory that it is trying to create to the one that we set against the new user djdadm.
    This error is experienced quite early in when SAPINST is performing the tasks (and it stops at the Create users for SAP system stage).
    I was experiencing a problem where SAPINST crashed completely for a while, so I've downloaded the latest version of SAPINST today.  Also, I've set a new TEMP folder and am running SAPINST from there, but am stuck at the problem mentioned above.
    Any help would be much appreciated. 
    Alistair Crawshaw

    Hello,
    It looks like a Solaris issue. Check if the home directory /home is reserved in the Solaris configuration.                                                                               
    You may try this in that case:       
    1. modify /etc/auto_master file to change the entry for '/home' to say 
       '/autohome' instead                                                  
    2. reboot                                                              
    3. rmdir /home                                                         
    4. ln -s /export/home /home (make sure /export/home exists)       
    Regards,
    Désiré

  • Unable to create : com.mysql.jdbc.Driver error with JDeveloper 10.1.3

    Hi all,
    I got this error when I tried to execute a simple JSF app. I am using JDeveloper 10.1.3 release edition. Please advice
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    **** Unable to obtain password from principals.xml. Using default.
    C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
    C:\JDeveloper10g\jdk\bin\javaw.exe -ojvm -classpath C:\JDeveloper10g\j2ee\home\oc4j.jar;C:\JDeveloper10g\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    2006-01-31 21:40:47.062 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war...
    2006-01-31 21:40:47.093 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms
    2006-01-31 21:40:47.093 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war
    2006-01-31 21:40:47.156 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar...
    2006-01-31 21:40:47.156 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources
    2006-01-31 21:40:47.171 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar
    2006-01-31 21:40:47.218 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear...
    2006-01-31 21:40:47.281 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j
    2006-01-31 21:40:47.359 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear
    2006-01-31 21:40:47.375 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war...
    2006-01-31 21:40:47.375 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp
    2006-01-31 21:40:59.296 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war
    2006-01-31 21:41:08.421 WARNING J2EE OJR0107 Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    06/01/31 21:41:08 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Jan 31, 2006 9:41:08 PM com.evermind.server.ApplicationStateRunning initConnector
    SEVERE: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    06/01/31 21:41:08 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2016)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1961)
         at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1220)
         at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:356)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:208)
         at com.evermind.server.Application.setConfig(Application.java:391)
         at com.evermind.server.Application.setConfig(Application.java:309)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1771)
         at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1532)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:939)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:113)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
         at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:322)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:1997)
         ... 11 more
    Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:247)
         at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:107)
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
         ... 13 more
    Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: com.mysql.jdbc.Driver
         Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
         Loader: oc4j:10.1.3
         Code-Source: /C:/JDeveloper10g/j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in C:\JDeveloper10g\j2ee\home\oc4j.jar
    This load was initiated at current-workspace-app.root:0.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.
         at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2061)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1665)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1621)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1606)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:242)
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:244)
         ... 15 more
    Jan 31, 2006 9:41:08 PM com.evermind.server.ApplicationStateRunning initConnector
    SEVERE: Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2016)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1961)
         at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1220)
         at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:356)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:208)
         at com.evermind.server.Application.setConfig(Application.java:391)
         at com.evermind.server.Application.setConfig(Application.java:309)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1771)
         at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1532)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:939)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:113)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
         at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:322)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:1997)
         ... 11 more
    Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:247)
         at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:107)
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
         ... 13 more
    Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: com.mysql.jdbc.Driver
         Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
         Loader: oc4j:10.1.3
         Code-Source: /C:/JDeveloper10g/j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in C:\JDeveloper10g\j2ee\home\oc4j.jar
    This load was initiated at current-workspace-app.root:0.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.
         at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2061)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1665)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1621)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1606)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:242)
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:244)
         ... 15 more
    06/01/31 21:41:08 WARNING: Application.setConfig Application: current-workspace-app is in failed state as initialization failedjava.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Jan 31, 2006 9:41:08 PM com.evermind.server.Application setConfig
    WARNING: Application: current-workspace-app is in failed state as initialization failedjava.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    2006-01-31 21:41:08.531 WARNING J2EE 0JR0013 Exception initializing deployed application: current-workspace-app. Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 29125 ms.

    I did what Manu suggested with no success. Alternatively, I registered the driver jar with embedded OC4J preferences > global > libraries. Still does not work. Please, note, that when I run JUnit tests against my BC4J application modules with JDBC URL as connection type, everything works just fine. The problem comes while running the JSF application when the application module is using JDBC DataSource as connection type.

  • Getting "Unable to create VOLUMES/" error when exporting photos

    I am trying to export a number of photos from iPhoto '08 to a USB stick that has been freshly formated with FAT 32. When iPhoto reaches a photo that has a vertical orientation the export stops and throws this error:
    "Unable to create VOLUMES/JUMP DRIVE/filename"
    These photos were taken with a Canon Powershot SD700IS. The camera has the ability to sense orientation when the picture is taken. It will automatically rotate pictures that were taken while holding the camera on its side. If the picture was taken with a horizontal (normal) orientation the export is successful.
    I was able to work around this by opening the offending files in Preview and saving them from there. Obviously this is a time consuming extra step that shouldn't be necessary.
    If anyone has any ideas I would greatly appreciate them!
    Thanks!
    Message was edited by: MTEGuitar

    Then you have a managed library.
    Go to your Pictures Folder. There you'll see the icon for your iPhoto Library. Right Click on that icon and select 'Show Package Contents' from the resulting menu. A Finder window will open and you'll see your Library internals. Have a look for the /Originals Folder. Inside it will be the folders for your Events. These should include the full sized photos.
    If they do, then
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • HTTP:RMI EJB Unable to create InterfaceType: com.evermind...SubordinateXA..

    Hi,
    I have deployed some ADF BC as EJB to oc4j1013 and want to access them
    using the HTTP tunnel. It works perfectly within JDEV
    1) Calling EJB withing JDEV with RMI
    2) Calling EJB within JDEV through HTTP:ORMI
    3) Calling EJB with RMI as JClient Web Start
    But does not work as JClient Web Start and HTTP Tunneling with the stck below:
    oracle.oc4j.rmi.OracleRemoteException: Unable to create InterfaceType: com.evermind.server.SubordinateXAResource
         at com.evermind.server.rmi.RMICall.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMICall.java:110)
         at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:128)
         at com.evermind.server.rmi.RMIClientConnection.obtainRemoteMethodResponse(RMIClientConnection.java:472)
         at com.evermind.server.rmi.RMIClientConnection.invokeMethod(RMIClientConnection.java:416)
         at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:63)
         at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28)
         at __Proxy0.create(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.inv
    Please advise
    Thanks
    JO

    I did what Manu suggested with no success. Alternatively, I registered the driver jar with embedded OC4J preferences > global > libraries. Still does not work. Please, note, that when I run JUnit tests against my BC4J application modules with JDBC URL as connection type, everything works just fine. The problem comes while running the JSF application when the application module is using JDBC DataSource as connection type.

  • IPhoto exports some Originals but hangs, saying "Unable to create /Users/

    I have a folder of 43 photos, some jpgs but a lot of the Originals are RAW and a couple of large tiffs, too. I'm trying to send them to a graphic designer for use in a book, so I want the highest quality. I would like to export them as Originals, so I don't have to search for each photo individually. The Export Originals process works for three jpgs, then I get Unable to create Users/amyzerner/Desktop/ then the first four letters of the name of the folder to which I'm exporting the photos, which I want to burn to a DVD. If I export them as Jpgs or Tiffs, all works well. Does anyone have any idea what the problem is here? Thanks in advance.

    How much free space do you have on the boot drive?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • IPhoto 6 trouble EXPORTING VERTICAL photos; Unable to create/Users/...

    I've been trying everything I can think of to export all of my photos to Finder folders and then to albums on a website - either by selecting and dragging to the folder OR by exporting. The horizontal photos export easily, but the VERTICAL photos will not move out of iPhoto. The message that pops up is: "Exporting - Unable to create/Users/my name/place tp which I'd like to export." Nor will the VERTICAL photos enlarge/display when I double click on them in iPhoto - the window that comes up has a gray square with an exclamation mark in it. Since my problem only ocurrs with VERTICAL photos, it seems to be different than the recently posted question about the same message. I did verify my HD disk. My computer savvy is limited, so detailed help is needed! Thanks!

    Check them all and leave them checked. The "!" problem can also occur if iPhoto is interrupted while writing to its database file, Library6.iPhoto. See the tip at the end of my signature. It can help you recover from the "!" problem and get your library back to where it was at the time of the last backup.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Cisco CA + Cisco VPN Client - Error 42: Unable to create certificate enrolment request

    We find ourselves in a difficult situation with the
    Cisco VPN Cleint version 5.0.07.0290 where it keeps giving us an
    "Error 42: Unable to create certificate enrolment request" when we attempt to use the Online enrolment method to create and enrol a new certificate.
    There is no additional information in the VPN client logs where we have set 3-High for all logs.
    In addition, Wireshark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
    To create and enrol a certificate we do the following:
    1. Click on the Enroll button to show the Certificate Enrolment dialog
    2. Select  Online
    3. Select <New> for Certificate Authority
    4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825)
    5. Click Next to display the dialog where we can enter certificate details
    6. Enter details in all fileds except IP Address and Domain
    7. Click Enroll which shows a dilaog with the Error 42 ... message in it.
    If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrolment request.
    The fact that the client does not send any messages to the Cisco CA leads us to belive that we have a pronblem on the clinet machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem.
    We will be grateful for any assistance that you can provide with this issue. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the clinet on a Windows 7 64bit machine and attempted the steps listed above.
    Thank you
    Emil

    FYI, I just came up against this problem and the solution in my instance was to ensure that the Cisco CA Server was configured to automatically grant certificate requests.
    Cisco2691#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Cisco2691(config)#crypto pki server CERTSERVER
    Cisco2691(cs-server)#grant ?
      auto     Automatically grant incoming SCEP enrollment requests
      none     Automatically reject any incoming SCEP enrollment request
      ra-auto  Automatically grant RA-authorized incoming SCEP enrollment request
    Cisco2691(cs-server)#grant auto
    % The CS config is locked. You need to shut the server off before changing its configuration.
    Cisco2691(cs-server)#shut
    Cisco2691(cs-server)#grant auto
    Cisco2691(cs-server)#
    Mar 25 19:39:53.356: %PKI-6-CS_GRANT_AUTO: All enrollment requests will be automatically granted.
    Cisco2691(cs-server)#no shut
    % Certificate Server enabled.

  • Unable to create "filename" when exporting to SD disk from iphoto 7.1

    I recently upgraded from iphoto 4 to 7. I did do because when I tried to export to a SD disk, I kept getting the unable to create message on various photos. I did the upgrade to 7 and I am still seeing this error message. Has anyone else run across this one?

    George:
    Welcome to the Apple Discussions. Try exporting to a folder on the Desktop and then copy the folder to the SD memory card. Also make sure there are no unusual/unsupported characters in the file names, i.e. anything other than 0-9, a-z, _, -. The format of the memory cards, PC based, does not accept those unusual characters. If there are a lot of special characters in the file names, you can batch change the title of the files with the Photos->Batch Change menu option. Then select the option during export to use the title as the new file name.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Unable to Load Database/Unable to create database.

    RoboHelp 6.0 on my PC is suddenly unable to open existing
    projects or create new ones. The problem is not in the projects, as
    other people can unzip the same set of files and open them with
    RoboHelp on their PCs.
    The Details:
    When attempting to open an existing project (any project
    whether in version control or not), I get the message " Open
    project was cancelled or the application was unable to load
    database for..."
    I found the article that says to delete the CPD and XPJ files
    and then to use the Edit option to open the HHP file so that
    RoboHelp will recreate the two files. When I try that, I get the
    message "Unable to create database. Check that the directory is not
    read-only." It's
    not read-only.
    When I attempt to create a new project, the application acts
    like it is going to create one, but it just creates a project
    folder without the new first topic and then repeats the New Project
    Wizard window that prompts for title, etc. It will keep creating
    folders and returning to this window in a loop without ever really
    creating a project.
    RoboSource Control is functioning normally, by the way.
    I have uninstalled and reinstalled RH 6 several times, and
    have even uninstalled RH 6 and installed to RH 5 just to see if it
    could open projects, which it does with no problems. After that
    test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
    the same problem all over again.
    This started happening after I uninstalled other unrelated
    software and received a message that some Service Pack 2 files had
    been changed and prompting me to insert the Service Pack 2 CD,
    which I don't have. This is because our IT department pre-builds
    our systems from an image and then distributes job-specific
    applications over the network. IT tried repairing Service Pack 2,
    but that didn't work. I'd like to uninstall and reinstall Service
    Pack 2, but the IT person says it's too risky on a system that was
    built from an image.
    We would like to find out
    which files RoboHelp is looking for when it launches a
    project so we can replace those files manually. Does anyone
    know what they are or have another suggestion that might fix the
    problem?
    Otherwise, I am stuck having to allow IT to rebuild my
    system. That means reinstalling and reconfiguring everything on it,
    just as if I were upgrading to a new PC. This can take a whole work
    week. However, I have already spent close to a work week on this
    problem, so maybe rebuilding would save time in the long
    run.

    Problem Resolution = HHA.dll
    For anyone who might be interested in the resolution to this
    issue, we did rebuild my PC and reinstall all of my software. The
    RoboHelp installation "complained" that I did not have HTML Help
    Workshop on my system and told me to download version 1.4 from
    Microsoft. I did have HTML Help Workshop..it's in my programs list.
    (It's not listed in programs on my co-workers' PCs, and they were
    not having problems, by the way.) But to make RH happy, I
    uninstalled the workshop and tried to install the version from
    Microsoft. But a message informed me that I already had a newer
    version of the workshop on my system, and I was back where I
    started. I could open projects, but there were weird problems.
    Selecting Topic Properties was met with an error message, and when
    the properties window opened, I could only see whatever template
    was assigned (or none if the topic had lost its template), and
    there was an extra section for Oracle help.
    So I started dinking around in the registry to see if I could
    get rid of any traces of the workshop so I could install the
    version RH wanted or to find any other clues to my problem. Under
    HTMLHelpAuthor, there was a reference to an HHA.dll file located in
    C:\WINDOWS\system32...only the file did not exist on my system.
    (Remember that my original problem was that some Service Pack 2
    files were either modified or missing.) So I did a Google search on
    that file name and found out that HTML Help Workshop is included in
    newer Windows operating systems, but that people used to have to
    get HTML Help Workshop from Microsoft, and that some people had
    made the mistake of just putting the HHA.dll file into the
    C:WINDOWS\system32 folder without also installing HTML Help
    Workshop. At this point it was obvious that I needed the HHA.dll,
    so I got it from a co-worker's PC. (Looking at the registry
    entries, I can also see that my system was built with a slightly
    different version of the operating system than my co-workers have.)
    Adding the HHA file to my system solved the problem. All
    projects but one were fine; one was still exhibiting the strange
    behavior. I fixed it by going back to the RoboHelp 5 version of the
    project and re-converting it to RoboHelp 6.
    I suspect that if I had known about the HHA.dll file before
    we rebuilt the PC, I could have solved the problem without going
    through that painful process. That is why I thought I should post
    the solution even though it was after the rebuild.

  • Unable to create a report in bi publisher 10g

    Hi All,
    Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
    Operation failed: /abcd/abcd.xdo.
    When we tried to create a report with the existing name, it is saying
    An object with the same name already exists: /crm/crm.xdo
    I can say this is not any permissions problem, I have logged inwith Administrator user.
    Thanks

    Hi,
    Can any one..???

  • Unable to create report. Query produced too many results

    Hi All,
    Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
    the large amount in the grid anyway?
    I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
    Here Event Viewer log error at the server:
    1. An exception occurred while running a report.  The following details may help you to diagnose the problem:
    Error Message: Unable to create report. Query produced too many results.
            <br>
            <br>
            Contact the administrator for more details.
    Dashboard Name:
    Dashboard Item name:
    Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
    Request Duration: 6,220.93 ms
    User: INTRANET\spsdshadmin
    Parameters:
    Exception Message: Unable to create report. Query produced too many results.
    Inner Exception Message:
    Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
       at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
       at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
       at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
    PerformancePoint Services error code 20604.
    2. Unable to create report. Query produced too many results.
    Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
       at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
    PerformancePoint Services error code 20605.
    Thanks in advance for your help.

    Hello,
    I would like you to try the following to adjust your readerquotas.
    Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
    On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
    \Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
    Locate and change the the below values from 8192 to 16384.
    Open the Client.config file. The file is located in the following folder:
    \Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
    Locate and change the below values from 8192 to 16384.
    After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
    <readerQuotas
    maxStringContentLength="2147483647"
    maxNameTableCharCount="2147483647"
    maxBytesPerRead="2147483647"
    maxArrayLength="2147483647"
                  maxDepth="2147483647"
    />
    Thanks
    Heidi Tr - MSFT
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Printing larger rows in blank report

    I have a training log that managers can print out when holding training. There is a pre-populated one that fills out spots for current employees and adds blanks at the end and one that is completely blank. On the pre-populated one, I can alter the si

  • PO user exit for payment terms release strategy

    Hi friends, My requirement is to any changes to Payement terms in PO should trigger the re-release of the po.... Plz. explain... How to proceed... which user exit i have to use........ Thanks in advance, Navin.....

  • How to prevent pending task in GP Runtime

    Hi experts, What should I do when I don't a pending task to be in  GP Runtime when the result state is Terminated. Thanks.

  • Creating, Editing & Exporting PDFs

    Any suggestion to my latest discussion? I still have some doubts about settings values and preferences to create a PDF document from a scanner. Thank you

  • 2 gigs of .mov files too big for dvd?

    I have 3 .mov files that I want to burn to a dvd. Each individual file is approx 700 meg or so. When I try and add the first file, it appears that it takes up 3.9g of 4g. Dragging the 2nd file in gives me the "Project Duration Error" "Your project ex