Unable to create Init Delta InfoPackage.

Hi Experts,
I am working on BI 7.0 within Solution Manager (GSB 100).
Since I am extracting data from only 2 tables into 2 different InfoCubes, we did not require to create any Master Data loads.
In order to load these 2 InfoCubes, I have created 2 Transactional Generic DataSources in RSO2. When I try to create an InfoPackage from the context menu of these DataSources, Only Full Update is coming up in the Update Tab.
I'll create 2 Process Chains eventually for each InfoCubes. How can I create one Init Delta with / without Data Transfer and another Delta InfoPackage?
Any help is very much appreciated. Points will be assigned.
Thanks,
Chandu

Hi Naveen,
You were right. I changed it to Generic Delta and it's working fine now.
Thanks a lot for that. Points assigned.
Quick one... If I wanted to do a Delta Load each time except for the very first time (i.e. Init Delta), it better to have 2 InfoPackages. But should they be as below:
1. Init Delta (should this be With Data or Without Data Transfer...?)
2. Delta Update
Cheers,
Chandu

Similar Messages

  • How to edit data selection(Date) for an Init Delta Infopackage

    Hi Experts,
    We have a Process Chain which contains an Delta Infopackage.
    This Delta Infopackage has a Data Selection (Date) condition which is till 12/2008. As well the same date selection is present in the init method as 12/2008.
    Also we need to change the date selection in the data sources in R/3 side.
    *Is there a way to edit the Init condition so that we can pull 2009 data without deleting the present Init and recreating a new Init?????? please suggest us with the procedure for the same.
    Also could you tell us the impact of changing the date selection in BW and R/3 side??
    Appreciate your response.
    Thanks
    Vivek Das Gupta

    Hi Ajeet,
    I followed the steps you mentioned.
    I created a new infopackage, gave the condition (01/2009 to 12/2999) and did a Init without Data transfer.
    1. Now if we do a Delta load, will the loading be based on both Init Selections (01/2004 to 12/2008 and 01/2009 to 12/2999)  or will it take the recent Init condition only(01/2009 to 12/2999)??
    2. After doing the New Init(01/2009 to 12/2999), the Delta InfoPackage still shows the old Data Selection (01/2004 to 12/2008) In Selection Tab of IP, do we need to change the Date Selection  as 01/2009 to 12/2999?
    3. Where can we the Data selection in R/3 (TCODE)??
    Vivek Das Gupta

  • COPA Init Delta

    Hello,
    In loading our COPA cube from R/3 to BW, when we run two init delta infopackages in parallel, we get the following error "An init or delta request is already running for this DataSource". 
    We believe this has to do with the timestamp functionality.  According to the documentation we have found, it appears as though we should not split our init delta load into multiple infopackages, but rather limit it to one singe infopackage that loads everything.  Can anyone confirm this?
    Our COPA datasource is costing based and set up as a generic delta.  We are on R/3 PI 2004.1 and BW 3.5.
    Thanks,
    Kelley

    Hi,
    That is right, and it will have to do with the timestamp functionality as you said.
    Following is from the HOW-TO document which is not exactly for this scenarion but implies the same reason.
    "There can only ever be one valid initial package for a DataSource. If, for the same DataSource, a separate initialization is scheduled for different selections, for example, and data is posted to the operating concern between the individual initializations, data inconsistencies could occur between SAP BW and OLTP. The reason for this is that, with each initialization, the time stamp of the DataSource in the OLTP system is set to the current value. Consequently, records from a previous selection are no longer selected with the next delta upload if they were posted with a different selection prior to the last initial run."
    hope this helps..
    cheers,
    Ajay

  • Can't find an option of Init Delta when creating InfoPackage.

    Hi Experts,
    I am working on BW 7.0 implementing HCM.
    I am creating InfoPackages for both Master and Transaction data. My concern is... I don't find an option of selecting 'Init Delta' while creating the InfoPackages.
    I have setup Deltas for all the DTPs but I don't think this would make any difference.
    Any help is much appreciated.
    Regards,
    Chandu

    Chandu,
    Only initialization option available at infopackage level for datasources which supports DELTA.
    If not available means that particular datasource wont support DELTA. only FULL possible.
    Srini

  • Error 8 while do init delta from ODS to ICube

    I got error while was trying to load Init data by InfoPackage from ODS to Cube:
    Error                                                   8 when starting the extraction program
    Message no. R3019
    Diagnosis
    Error                                                   8 occurred when starting the data extraction program.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or create a problem message of your own.
    There is no any OSS notes regarding this error, I checked forums - non of the answers didn't work for me.
    Additional info:
    I got this error after canceling Init Load to the same Cube (by changing load Status to red). After that I deleted all data from Cube, also did reset Delta Init in InfoPackage. I suspect this job cancellation caused this problem. How can I repair it?

    Hi,
    Check this Note 147104 to edit table ROIDCPRMS.
    Regards
    Lavanya

  • Multiple Init Delta

    Hai friends,
    I have a requirement where data from a infocube needs to be staged into 2 different ODS. Now the flow is such that the data from infocube should be first staged to ODS1(A part of data in the infocube) and then data from Infocube should be staged to ODS2(This data is different from what is updated in ODS1) and in its update rules am referring to the data in ODS1.
    Now if i do a full upload its working fine.
    How do i initliaze the delta ?
    If i create 2 infopackages with data targets in one as ODS 1 and in other as ODS2 and initialize the delta, in the delta infopackage it takes the latest init selections.
    Hope my requirement is clear.
    Kindly suggest what i can do ?
    Regards,
    Neha Solanki

    You want to do load to ODSs based on condition right.This you can achieve in routine.
    Now you want to look up ODS1, but for what ??? You would have got the entire data in that datapackage itself.You can access this data while loading itself.
    Why bother lookup the data same data after loading.
    If your requirement is still the same then you can try the below :
    If you want delta I dont think so that can be done.
    You can may be think of full load to one of the ODS from which you need to look up if no. of records is less and do delta to the other one.In this case you need to do init to only one of the ODS.
    Hope this helps.

  • Init Delta Transfer

    Hello Experts
    I am facing a small issue. I have a landing ODS (ZVAITM).
    From which my data is going to Domestic cube(ZCDOM). Now i got a requirement to load the data from the landing ods (ZVAITM) to other cube export (ZCEXP). Now my problem is if i use the same infopackage, which is "init Delta transfer" which i used to load the first cube (ZCDOM), its not allowing me to do tat "2 inits not possible". how can i get the data to new cube using the same info package...is that the right way or we need to create seperate info package?i am confused...any kind of help is really appreciated..thanks
    Regards
    Sri

    Hi,
    If u havnt loaded any data after the init to the first data terget then delete that Init first.
    for this goto the info pack, from the menu Scheduler-> init for the source system. from here u can delete the INIT.
    Then create an update rule based on the same data source to the 2nd data target. and then take Init with delta. Now it will work..
    Hope it helps-
    MM

  • Delta Infopackage

    Dear Experts,
    Could you please tell me the difference between init and delta infopackage.
    shall there be two infopackage ie one for init and one for delta.
    What i understood is initil when we run the init .then the next time we will get delta infopackge.
    Please correct me if i am wrong.
    Shall this be done in the same infopackge or we need create  init in one and create new for delta.
    Please explain in detail.
    What do u means my initialisation and if i delete the init what will happen.
    Thanks,
    Saveen Kumar

    Hi Saveen Kumar:
    To get a full explanation on this topic, please refer to the paper by Aakash Deep Arora / Nikhil Santosh Saxena.
    "Setting up Delta Process for LO Extractors for First Time Using Queued Delta"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d019f683-eac1-2b10-40a6-cfe48796a4ca?quicklink=index&overridelayout=true
    Regards,
    Francisco Milán.

  • When I run delta infopackage  no data was loaded

    Dear all friends
    I created a datasource by view in R3 side(t-cd rso2)
    and delta field is one of view key
    In bw side I created two infopackage init&delta
    one case
    1, run init infopackage without data , no problem
    2,create delta infopackage (timestamp UL 1800,LL 0)
    3,run delta infopackage but no data can be loaded
    two case
    1, run init infopackage withdata , no problem (32 records were loaded)
    2,create delta infopackage  (timestamp UL 1800,LL 0)
    3,run delta infopackage but no data can be loaded
    4, I checked rsa7, and found the time stamp is 0 WHY?
    When I test I also insert or delete r3 side records into table
    but I can not load data to psa with delta update
    PLEASE HELP ME

    Hi,
        What Delta specific field are you using ?
    Have you mentioned the Safety Upper & Lower limit ?
    Follow this document. It will show you where you have missed out..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Regards,
    Balaji V

  • Unable to create : com.mysql.jdbc.Driver error with JDeveloper 10.1.3

    Hi all,
    I got this error when I tried to execute a simple JSF app. I am using JDeveloper 10.1.3 release edition. Please advice
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    **** Unable to obtain password from principals.xml. Using default.
    C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
    C:\JDeveloper10g\jdk\bin\javaw.exe -ojvm -classpath C:\JDeveloper10g\j2ee\home\oc4j.jar;C:\JDeveloper10g\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    2006-01-31 21:40:47.062 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war...
    2006-01-31 21:40:47.093 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms
    2006-01-31 21:40:47.093 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\dms.war
    2006-01-31 21:40:47.156 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar...
    2006-01-31 21:40:47.156 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources
    2006-01-31 21:40:47.171 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\connectors\datasources\datasources.rar
    2006-01-31 21:40:47.218 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear...
    2006-01-31 21:40:47.281 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j
    2006-01-31 21:40:47.359 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j.ear
    2006-01-31 21:40:47.375 NOTIFICATION Auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war...
    2006-01-31 21:40:47.375 NOTIFICATION Unjar C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war in C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp
    2006-01-31 21:40:59.296 NOTIFICATION Finished auto-unpacking C:\JDeveloper10g\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\applications\bc4j\webapp.war
    2006-01-31 21:41:08.421 WARNING J2EE OJR0107 Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    06/01/31 21:41:08 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Jan 31, 2006 9:41:08 PM com.evermind.server.ApplicationStateRunning initConnector
    SEVERE: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    06/01/31 21:41:08 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2016)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1961)
         at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1220)
         at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:356)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:208)
         at com.evermind.server.Application.setConfig(Application.java:391)
         at com.evermind.server.Application.setConfig(Application.java:309)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1771)
         at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1532)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:939)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:113)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
         at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:322)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:1997)
         ... 11 more
    Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:247)
         at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:107)
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
         ... 13 more
    Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: com.mysql.jdbc.Driver
         Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
         Loader: oc4j:10.1.3
         Code-Source: /C:/JDeveloper10g/j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in C:\JDeveloper10g\j2ee\home\oc4j.jar
    This load was initiated at current-workspace-app.root:0.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.
         at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2061)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1665)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1621)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1606)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:242)
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:244)
         ... 15 more
    Jan 31, 2006 9:41:08 PM com.evermind.server.ApplicationStateRunning initConnector
    SEVERE: Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2016)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1961)
         at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1220)
         at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:356)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:208)
         at com.evermind.server.Application.setConfig(Application.java:391)
         at com.evermind.server.Application.setConfig(Application.java:309)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1771)
         at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1532)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:939)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:113)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
         at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:322)
         at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:1997)
         ... 11 more
    Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:247)
         at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:107)
         at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
         ... 13 more
    Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: com.mysql.jdbc.Driver
         Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
         Loader: oc4j:10.1.3
         Code-Source: /C:/JDeveloper10g/j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in C:\JDeveloper10g\j2ee\home\oc4j.jar
    This load was initiated at current-workspace-app.root:0.0.0 using the Class.forName() method.
    The missing class is not available from any code-source or loader in the system.
         at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2061)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1665)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1621)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1606)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:242)
         at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:244)
         ... 15 more
    06/01/31 21:41:08 WARNING: Application.setConfig Application: current-workspace-app is in failed state as initialization failedjava.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Jan 31, 2006 9:41:08 PM com.evermind.server.Application setConfig
    WARNING: Application: current-workspace-app is in failed state as initialization failedjava.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    2006-01-31 21:41:08.531 WARNING J2EE 0JR0013 Exception initializing deployed application: current-workspace-app. Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : com.mysql.jdbc.Driver
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 29125 ms.

    I did what Manu suggested with no success. Alternatively, I registered the driver jar with embedded OC4J preferences > global > libraries. Still does not work. Please, note, that when I run JUnit tests against my BC4J application modules with JDBC URL as connection type, everything works just fine. The problem comes while running the JSF application when the application module is using JDBC DataSource as connection type.

  • Unable to create the protocol specific B2B message

    Hi,
    I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
    Description: Unable to create the protocol specific B2B message
    StackTrace:
    Error -:  AIP-51503:  General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
        at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
        at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
        at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
        at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
        at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
        at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
    Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        ... 7 more
    Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
        at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
        at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
        at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
        ... 6 more

    Hi,
    I recently created fresh new configurations on 10g Oracle B2B on a windows server. When i try to post an outbound ebxml 2.0 message, it fails with the below error:
    Description: Unable to create the protocol specific B2B message
    StackTrace:
    Error -:  AIP-51503:  General Create Message Error: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:3018)
        at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1698)
        at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:1008)
        at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1204)
        at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
        at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
        at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
    Caused by: java.lang.Exception: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        ... 7 more
    Caused by: java.security.cert.CertificateParsingException: signed overrun, bytes = 67
        at sun.security.x509.X509CertImpl.parse(X509CertImpl.java:1662)
        at sun.security.x509.X509CertImpl.<init>(X509CertImpl.java:173)
        at sun.security.provider.X509Factory.engineGenerateCertificate(X509Factory.java:90)
        at java.security.cert.CertificateFactory.generateCertificate(CertificateFactory.java:389)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getX509Certificate(EBMSOSDTSecurity.java:389)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.getCertificateForSigning(EBMSOSDTSecurity.java:328)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSOSDTSecurity.signAttachment(EBMSOSDTSecurity.java:247)
        at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2813)
        ... 6 more

  • Unable to create a whole root zone

    Hi Folks,
    I wanted to create a whole-root zone. I am unable to create one :(. Did some one encounter this problem ?.
    BTW: I have SC 3.2 installed on this two node cluster. I was able to validate our Data services on this setup without any problem Now I am trying to experiment with zones, by creating zones. I am unable to move further with my validation of our data services on zones.
    *) mkdir -m 700 /export/zone-1
    *) The version of the OS used
    # cat /etc/release
    Solaris 10 11/06 s10s_u3wos_09 SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 01 November 2006
    # zonecfg -z zone-1
    zone-1: No such zone configured
    Use 'create' to begin configuring a new zone.
    zonecfg:zone-1> create
    zonecfg:zone-1> remove inherit-pkg-dir dir=/sbin
    zonecfg:zone-1> remove inherit-pkg-dir dir=/usr
    zonecfg:zone-1> remove inherit-pkg-dir dir=/platform
    zonecfg:zone-1> remove inherit-pkg-dir dir=/lib
    zonecfg:zone-1> set autoboot=true
    zonecfg:zone-1> set zonepath=/export/zone-1
    zonecfg:zone-1> add net
    zonecfg:zone-1:net> set address=192.18.75.237
    zonecfg:zone-1:net> set physical=eri0
    zonecfg:zone-1:net> end
    zonecfg:zone-1> info
    zonename: zone-1
    zonepath: /export/zone-1
    autoboot: true
    pool:
    limitpriv:
    net:
    address: 192.18.75.237
    physical: eri0
    zonecfg:zone-1> verify
    zonecfg:zone-1> commit
    zonecfg:zone-1> exit
    # cat /etc/zones/zone-1.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE zone PUBLIC "-//Sun Microsystems Inc//DTD Zones//EN" "file:///usr/share/lib/xml/dtd/zonecfg.dtd.1">
    <!--
    DO NOT EDIT THIS FILE. Use zonecfg(1M) instead.
    -->
    <zone name="zone-1" zonepath="/export/zone-1" autoboot="true">
    <network address="192.18.75.237" physical="eri0"/>
    </zone>
    # zoneadm list -civ
    ID NAME STATUS PATH
    0 global running /
    - zone-1 configured /export/zone-1
    # zoneadm -z zone-1 verify
    # zoneadm -z zone-1 install
    Preparing to install zone <zone-1>.
    Creating list of files to copy from the global zone.
    Copying <6080> files to the zone.
    Initializing zone product registry.
    Determining zone package initialization order.
    Preparing to initialize <1071> packages on the zone.
    Initialized <1071> packages on zone.
    Zone <zone-1> is initialized.
    Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
    Installation of <1> packages was skipped.
    Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
    The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
    # pkginfo -i SUNWsczr
    application SUNWsczr Sun Cluster (non-global zones support)
    # pkginfo -i SUNWsczr
    application SUNWsczr Sun Cluster (non-global zones support)
    # pkginfo -i SUNWdtlog
    system SUNWdtlog System boot for Desktop Login
    # pkginfo -i SUNWsmmgr
    system SUNWsmmgr System Management Agent Startup scripts
    *** package <SUNWsczr> failed to install with fatal errors:
    WARNING: attribute verification of </export/zone-1/root/etc/init.d/stoprgm> failed
    pathname does not exist
    NOTE: When the package <SUNWsczr> was installed in the global zone, the file <etc/init.d/stoprgm> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone <zone-1> in the file </export/zone-1/root/etc/init.d/stoprgm>.
    ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWsczr/save/pspool/SUNWsczr/archive.
    pkgadd: ERROR: class action script did not complete successfully
    Installation of <SUNWsczr> on zone <zone-1> failed.
    *** package <SUNWnisr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nis> failed
    pathname does not exist
    NOTE: When the package <SUNWnisr> was installed in the global zone,
    the file <etc/nsswitch.nis> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/nsswitch.nis>.
    WARNING: attribute verification of </export/zone-1/root/etc/nsswitch.nisplus> failed
    pathname does not exist
    NOTE: When the package <SUNWnisr> was installed in the global zone,
    the file <etc/nsswitch.nisplus> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/nsswitch.nisplus>.
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nisplus> failed
    pathname does not exist
    NOTE: When the package <SUNWnisr> was installed in the global zone,
    the file <lib/svc/method/nisplus> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/nisplus>.
    WARNING: attribute verification of </export/zone-1/root/var/nis/NIS+LDAPmapping.template> failed
    pathname does not exist
    NOTE: When the package <SUNWnisr> was installed in the global zone,
    the file <var/nis/NIS+LDAPmapping.template> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/var/nis/NIS+LDAPmapping.template>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ nis/client.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/nisplus.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWnisr/save/pspool/SUNWnisr/reloc/var/svc/manifest/network/ rpc/rex.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/client.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/nisplus.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rex.xml> failed
    pathname does not exist
    Installation of <SUNWnisr> on zone <zone-1> partially
    failed.
    *** package <SUNWypr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/var/yp/updaters> failed
    pathname does not exist
    NOTE: When the package <SUNWypr> was installed in the global zone,
    the file <var/yp/updaters> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/var/yp/updaters>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/passwd.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/server.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/update.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWypr/save/pspool/SUNWypr/reloc/var/svc/manifest/network/ni s/xfr.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/passwd.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/server.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/update.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nis/xfr.xml> failed
    pathname does not exist
    Installation of <SUNWypr> on zone <zone-1> partially
    failed.
    *** package <SUNWipplr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWipplr/save/pspool/SUNWipplr/reloc/var/svc/manifest/applic ation/print/ipp-listener.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/ipp-listener.xml> failed
    pathname does not exist
    Installation of <SUNWipplr> on zone <zone-1> partially
    failed.
    *** package <SUNWaccr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-sar> failed
    pathname does not exist
    NOTE: When the package <SUNWaccr> was installed in the global zone,
    the file <lib/svc/method/svc-sar> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/svc-sar>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWaccr/save/pspool/SUNWaccr/reloc/var/svc/manifest/system/s ar.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/sar.xml> failed
    pathname does not exist
    Installation of <SUNWaccr> on zone <zone-1> partially
    failed.
    *** package <SUNWbsr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/etc/rpld.conf> failed
    pathname does not exist
    NOTE: When the package <SUNWbsr> was installed in the global zone,
    the file <etc/rpld.conf> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/rpld.conf>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/ra rp.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWbsr/save/pspool/SUNWbsr/reloc/var/svc/manifest/network/rp c/bootparams.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rarp.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/bootparams.xml> failed
    pathname does not exist
    Installation of <SUNWbsr> on zone <zone-1> partially
    failed.
    *** package <SUNWdhcsr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/etc/init.d/dhcp> failed
    pathname does not exist
    NOTE: When the package <SUNWdhcsr> was installed in the global zone,
    the file <etc/init.d/dhcp> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/init.d/dhcp>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWdhcsr/save/pspool/SUNWdhcsr/reloc/var/svc/manifest/networ k/dhcp-server.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dhcp-server.xml> failed
    pathname does not exist
    Installation of <SUNWdhcsr> on zone <zone-1> partially
    failed.
    *** package <SUNWatfsr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-autofs> failed
    pathname does not exist
    NOTE: When the package <SUNWatfsr> was installed in the global zone,
    the file <lib/svc/method/svc-autofs> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/svc-autofs>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWatfsr/save/pspool/SUNWatfsr/reloc/var/svc/manifest/system /filesystem/autofs.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/filesystem/autofs.xml> failed
    pathname does not exist
    Installation of <SUNWatfsr> on zone <zone-1> partially
    failed.
    *** package <SUNWkdcr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWkdcr/save/pspool/SUNWkdcr/reloc/var/svc/manifest/network/ security/krb5_prop.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/security/krb5_prop.xml> failed
    pathname does not exist
    Installation of <SUNWkdcr> on zone <zone-1> partially
    failed.
    WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.gif> failed
    pathname does not exist
    NOTE: When the package <SUNWapch2r> was installed in the global zone,
    the file <var/apache2/icons/world2.gif> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.gif>.
    WARNING: attribute verification of </export/zone-1/root/var/apache2/icons/world2.png> failed
    pathname does not exist
    NOTE: When the package <SUNWapch2r> was installed in the global zone,
    the file <var/apache2/icons/world2.png> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/var/apache2/icons/world2.png>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWapch2r/save/pspool/SUNWapch2r/reloc/var/svc/manifest/netw ork/http-apache2.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/http-apache2.xml> failed
    pathname does not exist
    Installation of <SUNWapch2r> on zone <zone-1> partially
    failed.
    *** package <SUNWbindr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWbindr/save/pspool/SUNWbindr/reloc/var/svc/manifest/networ k/dns/server.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/dns/server.xml> failed
    pathname does not exist
    Installation of <SUNWbindr> on zone <zone-1> partially
    failed.
    *** package <SUNWbnur> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWbnur/save/pspool/SUNWbnur/reloc/var/svc/manifest/network/ uucp.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/uucp.xml> failed
    pathname does not exist
    Installation of <SUNWbnur> on zone <zone-1> partially
    failed.
    *** package <SUNWcnsr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ chargen.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ daytime.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ discard.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ echo.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWcnsr/save/pspool/SUNWcnsr/reloc/var/svc/manifest/network/ time.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/chargen.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/daytime.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/discard.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/echo.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/time.xml> failed
    pathname does not exist
    Installation of <SUNWcnsr> on zone <zone-1> partially
    failed.
    WARNING: attribute verification of </export/zone-1/root/etc/lp/fd/pr.fd> failed
    pathname does not exist
    NOTE: When the package <SUNWpsr> was installed in the global zone,
    the file <etc/lp/fd/pr.fd> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/lp/fd/pr.fd>.
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/print-svc> failed
    pathname does not exist
    NOTE: When the package <SUNWpsr> was installed in the global zone,
    the file <lib/svc/method/print-svc> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/print-svc>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWpsr/save/pspool/SUNWpsr/reloc/var/svc/manifest/applicatio n/print/server.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/print/server.xml> failed
    pathname does not exist
    Installation of <SUNWpsr> on zone <zone-1> partially
    failed.
    WARNING: attribute verification of </export/zone-1/root/var/snmp/mib/sun.mib> failed
    pathname does not exist
    NOTE: When the package <SUNWsacom> was installed in the global zone,
    the file <var/snmp/mib/sun.mib> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/var/snmp/mib/sun.mib>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.dmi> is corrupt
    file size <373> expected <1125> actual
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/etc/init.d/init.snmpdx& gt; is corrupt
    file size <382> expected <685> actual
    ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.dmi> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/etc/init.d/init.snmpdx> failed
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/dmi.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWsacom/save/pspool/SUNWsacom/reloc/var/svc/manifest/applic ation/management/snmpdx.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/dmi.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/application/management/snmpdx.xml> failed
    pathname does not exist
    Installation of <SUNWsacom> on zone <zone-1> partially
    failed.
    *** package <SUNWdtlog> failed to install with fatal errors:
    WARNING: attribute verification of </export/zone-1/root/etc/init.d/dtlogin> failed
    pathname does not exist
    NOTE: When the package <SUNWdtlog> was installed in the global zone,
    the file <etc/init.d/dtlogin> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/init.d/dtlogin>.
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/svc-dtlogin> failed
    pathname does not exist
    NOTE: When the package <SUNWdtlog> was installed in the global zone,
    the file <lib/svc/method/svc-dtlogin> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/svc-dtlogin>.
    ERROR : i.manifest cannot find archived files in /var/sadm/pkg/SUNWdtlog/save/pspool/SUNWdtlog/archive.
    pkgadd: ERROR: class action script did not complete successfully
    Installation of <SUNWdtlog> on zone <zone-1> failed.
    *** package <SUNWnfssr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/nfs-server> failed
    pathname does not exist
    NOTE: When the package <SUNWnfssr> was installed in the global zone,
    the file <lib/svc/method/nfs-server> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/nfs-server>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/rquota.xml> is corrupt
    pathname does not exist
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWnfssr/save/pspool/SUNWnfssr/reloc/var/svc/manifest/networ k/nfs/server.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/rquota.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/nfs/server.xml> failed
    pathname does not exist
    Installation of <SUNWnfssr> on zone <zone-1> partially
    failed.
    *** package <SUNWntpr> installed with warnings:
    WARNING: attribute verification of </export/zone-1/root/etc/inet/ntp.server> failed
    pathname does not exist
    NOTE: When the package <SUNWntpr> was installed in the global zone,
    the file <etc/inet/ntp.server> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/etc/inet/ntp.server>.
    WARNING: attribute verification of </export/zone-1/root/lib/svc/method/xntp> failed
    pathname does not exist
    NOTE: When the package <SUNWntpr> was installed in the global zone,
    the file <lib/svc/method/xntp> was also installed. After the file was
    installed in the global zone, the contents and/or attributes of the file
    changed. The contents of this file must never be changed. As a result,
    the changes in this file have been duplicated in the non-global zone
    <zone-1> in the file </export/zone-1/root/lib/svc/method/xntp>.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWntpr/save/pspool/SUNWntpr/reloc/var/svc/manifest/network/ ntp.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ntp.xml> failed
    pathname does not exist
    Installation of <SUNWntpr> on zone <zone-1> partially
    failed.
    *** package <SUNWftpr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWftpr/save/pspool/SUNWftpr/reloc/var/svc/manifest/network/ ftp.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/ftp.xml> failed
    pathname does not exist
    Installation of <SUNWftpr> on zone <zone-1> partially
    failed.
    *** package <SUNWrcapr> installed with warnings:
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcapr/save/pspool/SUNWrcapr/reloc/var/svc/manifest/system /rcap.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/system/rcap.xml> failed
    pathname does not exist
    Installation of <SUNWrcapr> on zone <zone-1> partially
    failed.
    pkgadd: ERROR: source path </var/sadm/pkg/SUNWrcmdr/save/pspool/SUNWrcmdr/reloc/var/svc/manifest/networ k/talk.xml> is corrupt
    pathname does not exist
    chmod: WARNING: can't access /export/zone-1/root/etc/svc/repository.db
    chown: /export/zone-1/root/etc/svc/repository.db: No such file or directory
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/comsat.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/finger.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/login.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rexec.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rstat.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/rusers.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/spray.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/rpc/wall.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/shell.xml> failed
    pathname does not exist
    ERROR: attribute verification of </export/zone-1/root/var/svc/manifest/network/talk.xml> failed
    pathname does not exist
    Installation of <SUNWrcmdr> on zone <zone-1> partially
    failed.
    WARNING: attribute verification of </export/zone-1/root/etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> ; failed
    pathname does not exist
    NOTE: When the package <SUNWsmmgr> was installed in the global zone,
    the file <etc/sma/snmp/snmpconf-data/snmptrapd-data/traphandle> was also installed. Af

    Hello,
    I still get the errors.
    # zonecfg -z zone-one
    zone-one: No such zone configured
    Use 'create' to begin configuring a new zone.
    zonecfg:zone-one> create -b
    zonecfg:zone-one> set autoboot=true
    zonecfg:zone-one> set zonepath=/export/zone-one
    zonecfg:zone-one> add net
    zonecfg:zone-one:net> set physical=eri0
    zonecfg:zone-one:net> set address=192.18.xx.xxx
    zonecfg:zone-one:net> end
    zonecfg:zone-one> verify
    zonecfg:zone-one> commit
    zonecfg:zone-one> exit
    # zoneadm -z zone-one verify
    # zoneadm -z zone-one install
    Preparing to install zone <zone-one>.
    Creating list of files to copy from the global zone.
    Copying <6080> files to the zone.
    Initializing zone product registry.
    Determining zone package initialization order.
    Preparing to initialize <1071> packages on the zone.
    Initialized <1071> packages on zone.
    Zone <zone-one> is initialized.
    Installation of these packages generated errors: <SUNWsczr SUNWdtlog SUNWsmmgr>
    Installation of <1> packages was skipped.
    Installation of these packages generated warnings: <SUNWcsr SUNWxwplr SUNWfontconfig-root SUNWpcr SUNWdtdmr SUNWtnamr SUNWkrbr SUNWtnetr SUNWdoc SUNWppror SUNWocfr SUNWvolr SUNWnfscr SUNWwbcor SUNWwebminr SUNWgssc SUNWnisr SUNWypr SUNWipplr SUNWaccr SUNWbsr SUNWdhcsr SUNWatfsr SUNWkdcr SUNWapch2r SUNWbindr SUNWbnur SUNWcnsr SUNWpsr SUNWsacom SUNWnfssr SUNWntpr SUNWftpr SUNWrcapr SUNWrcmdr SUNWslpr SUNWsndmr SUNWsshdr SUNWstsfr SUNWswupclr>
    The file </export/zone-1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
    _DD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Unable to create Metadata connection for Dictionary Provider

    Hi,
    I am getting the following error while I try to run a Web Dynpro Application;
    The initial exception that caused the request to fail, was:
       com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
        at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:191)
        at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
        at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
        at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
        at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
        ... 37 more
    The JCo Connections are tested and pinged, they work fine.
    Can anyone please tell what the error could be?

    The details exception list is as below:
    com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.dow.dc.model.types.Syuname could not be loaded: com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
         at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.dictionary.runtime.DdException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:191)
         at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
         at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
         at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         ... 34 more

  • Help! Unable to create new native thread

    Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused.  Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread".  Then a few minutes later the same tag on the same page works just fine.
    I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
    Here are my arguments from the jvm.config file.
    # Arguments to VM
    java.args=-server  -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
    Here is a typical error that comes through.
    struct     
    Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4    
    DateTime    {ts '2010-06-23 10:07:44'}  
    Diagnostics unable to create new native thread null <br>The error occurred on line 122.
    GeneratedContent      
    HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main    
    Mailto      interweb@--------------------- 
    Message     unable to create new native thread      
    QueryString fuseaction=ManagedLists.MailSubscriptions     
    RemoteAddress     192.168.250.124
    RootCause   struct    
    Message     unable to create new native thread      
    StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)  
    I could really use some help figuring this out.  We are getting random errors a few times a day and usually in places where we are using CFLDAP.
    Thanks,
    David

    Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
    There's no definite answer from Adobe, because there's no definitive single question.  These errors come up because - for any number of possible reasons - the JVM becomes overloaded.  And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se.  So what's Adobe supposed to do?  Come and fix your application for you?  There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out.  Or you could hire someone like Mike Brunt to come and have a look at your set up.  All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
    I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually.  What causes this sort of thing?  More traffic than the server can process.  This could be because of server kit, or it could be due to code that doesn't scale to the requirement.  Usually the latter.  Basically one cannot polish a turd.
    I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
    I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS.  Everything has been running fine for the past few months, but now it's starting to crash more and more frequently.  I have CF 8.0.1.195765 and Java 1.6.0_04
    How many concurrent requests for 180000 clients generate?  The number of clients matters less than how heavily the site is used.  But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side.  Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
    If I was in your situation, I'd consider the following options:
    * upgrade your JVM to the most recent version (1.6.0_21?)
    * put more RAM in the box, and run a second CF instance on it.
    * get another box.
    * refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
    * run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
    * get an expert in to do the analysis side of things.
    * stop expecting Adode to fix "something".
    One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down.  Opening Windows Explorer and searching for files can take minutes.  Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown.  Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
    You don't, by any chance, store your client variables in the registry do you?  The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry.  Never store client variables in the registry.
    Adam

  • RFC Error: Unable to create Metadata connection for Dictionary Provider

    I configured two RFC ('WD_XXX__MODELDATA_DEST and WD_XXX_RFC_METADATA_DEST). I tested it and it shown green light.
    When I run my application that coonnect to CRM using RFC, I got the following errors:
    <i>com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.xxx.types.Syuname could not be loaded: com.sap.dictionary.runtime.DdException: 'WD_ICEBERG_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
         at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:670)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:443)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:381)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:410)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:79)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:121)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:117)
         at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:207)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:690)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:560)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:311)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:204)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:347)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:268)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:40)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.dictionary.runtime.DdException: 'WD_XXX_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:225)
         at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
         at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
         at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         ... 49 more</i>
    I understand that I need to configured the Metadata Dictionary type for the RFC. For this, I need to configure the Message Server properties (for load balancing).
    But my Basis guy told me that CRM is an application server, so we only can configured with application server properties. Is this true? (I really doubt it) That is no Message Server connection to CRM system now.
    If it is true, how can I create a RFC connection to CRM system?
    Thanks for help.
    Kent

    Hi KC,
    Try the following links, they may help you.
    http://help.sap.com/saphelp_nw04s/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/content.htm
    JCO connection
    Using the SAP Enterprise Connector for generating BAPI Proxy Classes
    points if useful
    Thanks
    Suresh

Maybe you are looking for

  • Row Selection for second and subsequent level nodes in tree table

    Hi All, We have a .jsff page with tree bindings to display a three-level hierarchy tree table.Suppose the hierarchy is -> Department ->-> Employees ->->-> Employee details. I have a use case where-in when we add the employee node within a department,

  • Setting dimensions of swf file

    Hi all, I have created a new Flex project that contains an mxml file. I have specified the dimensions of the file in the <mx: Application> tab. However, once I export a release build and run the swf file on its own using Flash Player 10, it opens in

  • Repeated Intranet authentication prompts

    I'm having trouble accessing an internal intranet site. I get endless user name / password prompts. I have the sites listed added to the configuration keys: network.automatic-ntlm-auth.trusted-uris network.negotiate-auth.delegation-uris network.negot

  • Why does my site look nothing like the design and during testing once uploaded to the server?

    Why does my site look nothing like the design and during testing once uploaded to the server?, Im using Muse whichj crashes like you would not beleive, but after much perseverance I got a basic 4 page holding site together, I tested the site and it a

  • Ipod fills up too quick when exporting from itunes.

    Hi there, this is defo an itunes problem not an ipod one - as i've tried it on various ipods and from different computers. Only on mine, (a powerbook g4), does ANY ipod - fill up really quickly/___sbsstatic___/migration-images/migration-img-not-avail