Unable to Create Instance of Essbase Query Designer

followed by Unable to Initialize Query Designer.Essbase v6.1Excel 97 sp2 iWin NT 4 sp5We are running into this error when trying to launch query designer."Unable to Create Instance of Essbase Query Designer"Query designer is checked in the addins before we try running it. We receive the messages. If we check the addins after we get the messages, query designer is unchecked.The Essbase addin works fine with no issues. Any thoughts on what this might be or how to troubleshoot it?Thanks.Mike

Update: is it possible that security rights to the Essbase directory would affect the Query Designer? On a machine that it works on, I've noticed that the "xla" file updates each time it is accessed.

Similar Messages

How to create two structures in query designer?

Hi experts,
I got the requirement to create 2 structures in query designer , as far as i concern i got to know that there will be chance to create on one for char and other for key figure,
is their any chance to create 2 structures on key figures.
If possible please help me in that.
Thanks in Advance
vas

Hi,
in Query at a time only 2 structures can be used, even thought there are many structures created on that infoprovider.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/content.htm]

TimeOutException - unable to create instance - after installing patch set.

Hi,
We have Oracle 9iAS 9.0.2 (Release 2) running on Windows 2000 Server.
We are running EJB's on the server, these include Entity and Session Beans.
Last week on 13-March 2003 (Thrusday) we installed a PatchSet downloaded from "metalink.oracle.com".
NAME: PatchSet 1 for Windows NT
After installation we faced the following problem :
1. Initial (first time) when an Entity Bean is called for a specific Primary Key, we are able to get the instance of the Bean.
2. However for subsequent request to the same Bean, it is unable to create or find an instance for the Bean, throwing the following error :
"TimeOutException" - "unable to create instance"
3. Though Step 1 and Step 2 are repeated on restarting OC4J_HOME.
We then uninstalled the Oracle 9iAS and reinstalled it without the PatchSet. On doing so, the above error did not occur.

Badrul,
Try setting max-instances=0 for your EJB in the orion-ejb-jar.xml.
regards
Debu

Urgent-Precalculation Service: Unable to create instance

Gurus,
I did install the SAP BW Precalculation Service on my desktop and did configure the Precalculation Service under SPRO->Administrate Precalculation Server. And after all that, whenever I started the Precalculation Server (via services) from the desktop the server at the BW end used to turn green. Until here everything was working a week back BUT! I got on to it again today and when I try and start the service on my desktop, I get the following error:
Application has generated an exception that could not be handled
Process id=0xefc (3836), thread id=0X84c(2124).
And when I try to uninstall (hoping I could re-install), I cannot even uninstall the same instead I get a different error:
Unable to create an instance of the com.sap.bi.et.precalcultion.BExPrecWindowsService.ProjectInstaller installer type.->Exception has been thrown by the target of an invocation --> Security error.
Can someone throw light on this please?
_RJA
Message was edited by: RJA

Update: is it possible that security rights to the Essbase directory would affect the Query Designer? On a machine that it works on, I've noticed that the "xla" file updates each time it is accessed.

Unable to see some Roles in Query designer

Hi all,
I have created a role in PFCG having some queries and assigned that role to my user id.
When i log into Query designer i m unable to see that role and all other roles i am able to see.
What could be the reason for this?
Did i missed to assign any authorizations?
Thanks,
Jaya.

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald

Unable to see the variable in Query Designer

Hello Experts,
I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
Kindly let me know where is this Variable using in my query designer ?
Thanks,
Anoop

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Unable to create Oracle BAM Sinks in Design Studio on Windows XP Profession

Hi,
I am unable to create any Oracle BAM Sink in Design Studio. I am getting this error, when trying to drag BAM Sink to my plan:
Failed to create the Transform COM object.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x5B]
Problem in step "Untitled, created 13. 11. 2007 16:39:07".
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x2, PlanMgr -- 0x32]
Error while preparing the Plan for execution.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0x11]
The Design Studio is installed on notebook with Windows XP Professional SP2.
On the W2K server with Data Flow Service installed it seems to be OK.
K.

Select Unique TO_CHAR(T1.TRANSDATE, 'YYYY') as YEAR,
TO_CHAR(T1.TRANSDATE, 'MM') as MONTH,
TO_CHAR(T1.TRANSDATE, 'MONTH') as MONTHNAME, T1.TRANSDATE
From SALES T1; <--bad
from SALES T1 <--correct
it should not have ";" at the end of the statement.

How to create an exception in query designer?

Hi,
I am new to BW. I created an exception and set the from and to limits with an alert level of green for an amount column. When I run this query in the web, it does not change the color to green for the condition in the amount column. What is the validity area of exception? Do I need to enter anything there? I am in BW 3.5

Hi,
You need to change the default option Result only to all the cells in the second tab(cell defining) of Exceptions in query designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/615f64816311d38b170000e8284689/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
Hope this helps............
Rgs,
Ravikanth.

Unable to find my InfoArea in Query Designer

Hi all,
Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
Please advise.
Thank you.
TR.

Hi,
You need to create the Query first to Find the Info Area (relevant to that Query)
You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
Hope it helps

Unable to create instance

Im running windows XP Professional all current updates
I have all of the latest updates on my laptop and I just downloaded the latest version of SQL Developer but when I try to open the program I receive this error “Unable to create an instance of the java virtual machine.”
Ive been looking at solutions all morning and to be honest I really don’t understand what they mean when they talk about AddVMOption -Xmx512M. I don’t know where to go to do this. Any ideas or other solutions??

Hi, I have the same problem. I downloaded 2.1.1 with JDK and I am local admin to my PC.
The error popup was:
unable to create an instance of the java virtual machine located at path: ..\..\jdk\jre\bin\client\jvm.dll
I googled around and tried:
1. Copy C:\Program Files\sqldeveloper\jdk\jre\bin\server\jvm.dll to overwrite C:\Program Files\sqldeveloper\jdk\jre\bin\client\jvm.dll. Didn't help, reverted.
2. Increase memory. My Computer -->Properties -->Advanced --> Performance (setting button) --> advanced --> virtual memory (change button) Didn't help.
3. add C:\Program Files\sqldeveloper\jdk\jre\bin to the front of the PATH. Didn't help.
And suggestions will be appreciated!
Thanks,

Create Buttons in the Query Designer, is that possible??????????

Hello,
When I Start the Query, I want to choose. For Expample:
For Display the Query with the Rows or not....
1.Button with Film Production
2.Button without Film Production
Can I realize 2 Buttons for that ?`??
Thanks and Happy Easter..
Barish
Edited by: Baris Ozcan on Mar 19, 2008 8:12 AM

Hi,
Selections means... your column or row.
In 7.0 QD .Select your keyfigure from column. right side you can see property window. where you have tab "Display". check that whether it should be "Always show". if it is there, definitely the keyfigure will show the result. and also, if you are not getting any output value, when u r executing the query. check that any filter have u used in Query..
might be ur query restriction doesn't give any value, that's y ur report looks empty.
note: there is no Query change mode in BI7.0 query designer, as we have in bw3.5.
Regards,
senthil

Creating formula in the Query Designer

Hi,
I have a KF which I have to convert in to different unit in the query ( x/data)
The problem is some of my data in the cube is zero (0) and when I use division, it shows me error (red X) in the query output.( Divide by zero)
Is there any way to skip this division if the data is zero? How can I set my formula in the Query designer?
Thanks
M Kumar.

Hi,
Please use the NDIV() or NOERR() function outside of your expression and it will take care of the division by zero.
See here for details:
http://help.sap.com/saphelp_nw04/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
Hope this helps...

Unable to write a formula in query designer

Hi Experts,
while writing a formula in query designer in development system there is an error.
Formula is:
Grand total =1
when i write in the rows it is throwing the sytax error like " General syntax error in formula"
But the same formula has been written in production( this query is not available in development so that i am designing the same query in the development system).
some one give me an idea.
Thanks

Hi,
As i checked with implementation team and they have written the formula it has been assigned like Grand Total = 1.
i.e. Grand Total assign to 1.(But it is not Grand Total == 1).
Thanks for your support.
Thx
Edited by: satya prasad on Apr 27, 2010 7:44 AM

Unable to create Instance with Object Editor and Attachment Pattern

Hi Experts,
I created a simple entity service with some attributes and a document reference.
I also configured an object editor pattern and assigned a attachment pattern. The created object editor works as long as I don't attach a file. But if I attach a file and want to save it I get an error message "cannot create"
In the default log.trc I have some entries
Cannot read associated instance with MOF ID 105D8E0C4F02D45AFFD5B9D6A09EFB7A of MOF Layer 2 for (6DC24B80F6004CDBF4FA6C560AEDD33C,<null>)
and
refPackageM1(com.sap.ip.bi.sdk.dac.olap.query) failed RepositoryDBMemory. Using generic one.
I configured the j2ee engine according the tutorial "Integrating KM with CAF UI Patterns"
So what is wrong?
Best regards Manuel

Hi,
From the stacktrace I assume that the following happens (please correct me, if I'm wrong):
* Some time based event mechanism sends an event to your custom event handler code. That code is execute in some system context.
* Your handler uses the RF API to create a collection. All this is perfectly OK. Here my assumptions end, the next steps are solid facts.
* Within the RF all property filters are informed that a resource is about to be created. One of the filters is trying to obtain a lock from a system provided Locking Service.
* That service refuses to grant the lock, telling that system users are not allowed to do so.
Most proably you cannot do anything to solve this problem by yourself. When I ran into the same Exception once, I could avoid to have my code run in a system thread. Well you might try to do the same.
Otherwise please open a customer message and complain about the restiction in the locking behaviour.
Best regards,
Michael

Unable to Create Instance of Essbase Query Designer

Similar Messages

Maybe you are looking for