Unable to create logical port

Dear All,
I have created a web service from a function module. I have also created a proxy for the web service.
Before creating the logical port, I am also including the same port name in the endpoint of the service.
My scenario is, I am creating and consuming the web service in the same server.
While creating the logical port, the error
SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL
is coming.
Can anyone help me out with this please?
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Apr 30, 2009 4:39 PM

Hi Prosenjit,
I have received the same error when creating a logical port.  I believe that the issue may be to do with the default PI WSDL containing two <wsdl:port> definitions, one for HTTP and one for HTTPS.  I saved the WSDL locally, removed the <wsdl:port> definition for HTTPS (as I am only using HTTP) and then generated the logical port successfully, without receiving the error message.
Please note that you must use the via File option, rather than via HTTP Access, as the HTTP version will still contain the two <wsdl:port> definitions.
Please also watch out for Note 1325092, which means the URL Access Path (on the Transport Settings tab) is not set correctly.  If this Note applies, you may need to copy the complete URL from the WSDL into this parameter if it is not set correctly.
Hope this helps.
Cheers,
Jon

Similar Messages

  • Unable to create logical port in SOAMANAGER

    Hi All,
    When Im tryign to create a logical port for my consumer proxy I get
    SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
    Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl  and Im using the same userid/pwd.

    Hi,
          Even I get the same error.
    SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
    I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
    Applied the note, still the same error.
    Have this issue is resolved?
    Any other solution?
    Regards,
    Sunil.

  • Error while creating logical port for Reporting

    Hi,
    In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
    When i am trying to create the logical port, i am getting an error saying,
    " SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
    https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
    I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
    And in case it has to be created, how to resolve this SRT framework exception?
    ~ Ramanath.

    Hi,
    the consumer proxy  /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
    However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
    So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
    You should find one entry. Select it and click "Apply Selection".
    Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
    Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
    Copy this value and go to your SAP GUI -> Transaction SM59.
    Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
    Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
    If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
    Regards,
    Holger.
    PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

  • Error while creating logical port for Consumer Proxy in SOAMANGER

    Hi,
    While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
    SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
    I have searched in the forums but none of the answers helped me.
    I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
    SAP_BC_WEBSERVICE_SERVICE_USER
    SAP_BC_WEBSERVICE_ADMIN_TEC
    SAP_BC_WEBSERVICE_CONSUMER
    SAP_BC_WEBSERVICE_ADMIN
    Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
    Please help me reslove this issue.
    Thanks and regards
    Sreehari Nambiar

    Hi,
    Please add the following roles as well.
    SAP_BC_WEBSERVICE_ADMIN_BIZ
    SAP_BC_WEBSERVICE_DEBUGGER
    SAP_BC_WEBSERVICE_OBSERVER
    Also make sure that you are doing the role comparison  after adding all SAP* roles in your profile.
    Let me know if this works?
    Thanks,
    Sridhar

  • Error while creating logical port from WSDL in SOAMANAGER

    Hi,
    I am trying to create a logical port for the webservice TerritoryCRMBasicDataByIDQueryResponse_In with the WSDL
    http://usciq9e.wdf.sap.corp:50077/sap/bc/srt/wsdl/sdef_TERRITORYCRMBASICDATABYIDQUERY/wsdl11/ws_policy/document?sap-client=506
    In SOA Manager, I selected the proxy object and clicked on 'Create Logical Port' ,
    gave the name and description for the port and set it as default.
    The other settings are :
    Configuration type : WSDL based configuration
    WSDL base is : Via HTTP Access 
    Then I gave the address of the WSDL in  the URL and the proper username and password. When I clicked on 'Apply Settings' I get the following error:
    "Error when building binding view: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL "
    Please advise me on how to approach the problem.
    Thanks,
    Sashi

    Creating logical ports is done here:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm

  • Error when creating Logical Port via WSDL on SOAMANAGER

    Hi,
    When  creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
    "Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
    We're consuming a WS provided by a .NET application.
    Our system is ECC 6.0 NW 7.01SP 7.
    Anyone have faced this error before?.

    hI,
    Please go through this link , you will get the solution
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3

  • Create logical port via http dest on soamanager

    Hi all
    I want to create logical port type H which i defined on SM59 and i want to relate it to the logical port which i create on  the soamanager .
    in the past i do that via lpconfig and now i want to do so on soamamanger,
    there is an idea how ?
    Best Regards
    Nina

    HI Gourav,
    U write;
    -> Supply details in configuration (Service name, Logical port name, WSDL address etc.)
    when i create the LP i pop up with :
    New Service Name: * 
    Logical Port Name: * 
    Logical Port is Default: 
    Configuration Type
    New Service Name: * 
    Logical Port Name: *  Logical Port is Default: 
    Configuration Type
    WSDL Access User: *
    WSDL Access User: *
    i have no place to define the RFC destination that I create via SM 59
    where i can define it?
    Best Regards
    Nina

  • Error while creating logical port in SOAMANAGER

    Hi,
    Im consuming the webservice.While creating the new logical .Im getting the following error.
    Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
    I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
    Please help me.
    Regards,
    Brahmaji

    Hi,
    tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
    If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
    In case of Web Services Please Check again in The ICF Services under
    sap/bc/srt/SAP and Check if your Service activated or not.
    If you don´t have Access to SOAmanagement you can see the specified Roles hier
    http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
    Regards
    A.Labrache

  • SAP* or DDIC being unable to create logical system in SAP PI 7.1

    greetings !
    I am not a basis person.
    I had freshly installed PI 7.1.  I was finding that I am being unable to create new logical systems . I tried logging to both clients 000 and 001 using sap* , ddic , and pisuper . pisuper does not even have the authorization to execute SALE . SAP* and DDIC can excecute SALE but unable to create or assign clients.
    I reinstalled my system from scratch thinking i must have errored on something, as creating clients is a very simple task. but even the new PI 7.1 gives me the same problem.
    is something wrong with my installation , or there are additional roles/authrizations I need to assign to a user.
    regards
    rishi

    Besides PISUPER other users are also created some of the are PIAFUSER, PIDIRUSER, PIRWBUSER etc. Every user has a specific purpose in a PI system. For activities like creating logical system etc. own id's should be used.
    There are couple of guides out there which explains in detail the purpose of all the users in PI system.
    Hope this helps.
    Thanks,
    Naveed

  • Error in creating Logical Port in SOAMANAGER

    Hello,
    I create a consumer proxy for http://www.thomas-bayer.com/axis2/services/BLZService?wsdl. No when I am trying to create a logical port I am getting SRT Exception. I am able to open the link in IE. What shall I do to solve it?
    Regards,
    Ahmed

    What type of SRT error you are getting? post complete message.
    SRT error with unsupported xstream means service provider is returning non-xml message (HTML).
    Please note I am able to get wsdl of this service but not the endpoint (HTTP return code: 500) so read documentation carefully if there is any additional requirement to access this service.
    Regards,
    Gourav

  • Acrobat 7: Warning 20225- Setup unable to create PDF Port Printer

    I had to replace my computer and I am trying to install Acrobat 7 Pro on Windows 7. I read a comment that said it's not compatible, but others say it can work.  Since Adobe closed the activation server for CS2 & Acrobat 7, Adobe tech support gave me the link for the non-activating version of the exe file and new serial #. I was successful at installing CS2. Acrobat says the installation is successful and I am able to open Acrobat but at the end of install I got the Warning 20225: Setup unable to create a new item- Adobe PDF Port Printer. I tried to uninstall and change compatibility to XP, SP3 which is what my previous computer ran on, but still get same error every time. I don't use most the features of Acrobat so it doesn't make sense for me to buy a new version. Mostly, I just need to be able to print files to pdf (from Word, Illustrator, web). Any ideas of how to get this part working?

    Thank you so much, Mylenium. I'm not sure if I'm setting up the printer right so please let me know where I am making errors.  I clicked "add a printer" and when it asks to choose a port, I left it as "use existiing port" and selected "File: Print to file". In the window to choose a printer, I clicked "Have Disk" and browsed to one of the .inf files (I ran a search in the Acrobat folder and found four .inf files shown below. I don't know which to use so tried each one)  but each time got the error message on the second screen shot below.
    Do you know if there is a newer driver that is compatible with Windows 7?

  • Unable to create logical joins

    Oracle BI version 10.1.3.3
    After transferring the tables from the physical layer to the business modeling layer, I am trying to create logical joins among the tables in the logical layer using the Logical Diagram. At the logical join dialog box, I am unable to select the table columns on either side and the join operator is grayed out. The join is created, but with an empty expression.
    I am, however, able to create foreign keys in this layer.
    What could be the reason for this, and how do I create logical joins? The documentation recommends to create logical joins rather than foreign keys.
    I have the same problem if I use the Join Manager.
    Thanks.

    Hi,
    What you´re doing is creating "Complex joins" at logical level, that´s why the boxes are grey, you can't insert a join operator in this type of joins. It is recommended that you use complex joins at logical level that follow's the physical joins at physical level.
    Regards.

  • Creating logical port pointing XI Runtime

    Hello Friends,
    for a abap backend to point to an XI,I need to create a logical port,which is pointing to
    a RFC destination of type H,to create an RFC destination of type H,i need to know the URL and service number,how do i find this information.
    regards
    kaushik

    http://help.sap.com/saphelp_nw04/helpdata/en/22/042652488911d189490000e829fbbd/frameset.htm
    RFC destination type H
    http://help.sap.com/saphelp_nw04s/helpdata/en/8f/770f41218ff023e10000000a155106/frameset.htm

  • Error while parsing wsdl while creating logical port

    Hi all,
    I have a ABAP consumer proxy created. Now I want to create a logical port in SOAMANAGER.
    When parsing the wsdl, the error is:
    SRT Framework Ausnahme. Fehler beim WSDL-Parsen: Fehler in Base-URI: Relative URI testtt.wsdl erfordert Angabe einer absoluten Base-URI
    which is in english something like:
    SRT Framework exception:Error parsing WSDL: Error in Base-URI: Relative URI requires absolute base-URI
    Do you have any idea? The wsdl is very simple, just one binding, no nested schemas, no reference to https site.
    Thanks in advance,
    Rolf
    Edited by: R.M. on Dec 1, 2011 4:54 PM

    Further investigation gave SAP_note 1327511 (Limiations and common problems in ABAP WSDL processing). Did not find any problems with that.
    I also checked the wsdl with the report RSSIDL_DESERIALIZE_DEMO - it's ok!
    BTW, the system is of Release 700-Level 25. Here's a part of the wsdl:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?><wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:sch="http://domain.de/b1tt/schema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://domain.de/b1tt/schema" targetNamespace="http://domain.de/b1tt/schema">
      <wsdl:types>
        <schema xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://domain.de/b1tt/schema">
        <element name="SendRequest">
             <complexType>
                  <sequence>
                       <element name="name" type="string">
                       </element>
                       <element name="ordertype" type="string">
                       </element>
                       <element name="orderno" type="string">
                       </element>
                       <element name="workflow-id" type="string">
                       </element>
                       <element name="file" type="base64Binary">
                       </element>
                       <element minOccurs="0" name="signature-file" type="base64Binary">
                       </element>
                  </sequence>
             </complexType>
        </element>
    ...omitted some more elements equally defined...
    </schema>
      </wsdl:types>
      <wsdl:message name="SendRequest">
        <wsdl:part element="tns:SendRequest" name="SendRequest">
        </wsdl:part>
      </wsdl:message>
    ...omitted some more messages equally defined ...
      <wsdl:portType name="TestTT">
        <wsdl:operation name="Send">
          <wsdl:input message="tns:SendRequest" name="SendRequest">
        </wsdl:input>
          <wsdl:output message="tns:SendResponse" name="SendResponse">
        </wsdl:output>
        </wsdl:operation>
      </wsdl:portType>
      </wsdl:definitions>
    Edited by: R.M. on Dec 2, 2011 1:41 PM

  • Problem while creating logical port using soamanager

    Hi all,
    I have created a client proxy for web service from a 3rd party system.
    When i am creating a logical port for the same consumer proxy i get a error as follows:
    RABAX_STATE -e: UNCAUGHT_EXCEPTION
    and a dump saying
    "  The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
         Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
          'CL_SXMLP_FRAGMENT=============CP' has to be terminated.                  
    Please suggest what can be done or what can be the problem.
    Thanks in advance.
    Komal

    Pls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
    Then go to txn LPCONFIG and create the logical port using the RFC dest.  Pls mention the path suffix appropriately.
    Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
    Pls reward points if the tips are helpful.

Maybe you are looking for