Unable to create multiple transport target groups in SLD

We have multiple R/3 QA systems but just 1 XI QA system and we need to test interfaces with all R/3 QA client at the same time. My XI development team has asked to explore whether its possible to create multiple target systems.
Currenlty R3_dev has R3_QA1 as target business system, we would like to add R3_QA2 as target system for R3_dev.
There is a "add/change" option in Transport tab and there is a grid which seems to imply that multilple entries are possible.
I have added R3_QA2 to the Group "Qa_Bus_Group" and was able to replace
R3_QA1 with R3_QA2 however I was unable to create multiple target systems.
I was wondering if anyone ran into this issue and any suggestions are welcome. Thanks in advance.

Hi Syed,
           You can create multiple target systems only for different business system groups.If all the business systems like R3_QA1,R3_QA2, R3_QA3 belong to the same business group "QA_BUS_GROUP" , then you can have only one among the three system as target.
           So R3_DEV can have only one system as target either R3_QA1 Or R3_QA2 or R3_QA3 since they belong to the same business group "QA_BUS_GROUP".
            If there are three different business system groups then you can have 3 target systems that correspond to their respective business system groups ,in this case source business system can be assigned to the 3 target systems that belong to different business system groups .
           Since that is not the case with your scenario, you cannot create multiple target systems.
Regards,
Laawanya

Similar Messages

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

In ECC 6.0, can I link a CTS project id to a transport target group?

In ECC 6.0, can I link a CTS project id to a specific transport target group?
I configured two IMG projects, namely, Phase1 and Phase2. In SPRO, I tied them to CTS project ids, DEV_P00001 and DEV_P00002, respectively. In STMS, I configured two transport target groups called /PHASE1/ and /PHASE2/ that I want to link with the corresponding project ids. The intention is that Phase1 transports will go to the clients specified in the /PHASE1/ target group and that Phase2 transports will go to the clients specified in the /PHASE2/ target group
I want to link the CTS project ids to the respective transport target groups so that (e.g.) if a team member creates a transport in SE01/SE09/SE10 and chooses the DEV_P00001 project id from the Project dropdown, then /PHASE1/ will appear as the default transport target. Likewise, if the team member instead chooses the CTS project id DEV_P00002, then /PHASE2/ will appear as the default transport target.
Right now, the user has to remember to choose the correct combination of CTS project id/transport target group.
Solution Manager is NOT involved in this scenario.
Does anyone know of a way to do this in ECC 6.0?

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

Transport target group

Hi All,
We have one transport target group /DEVALL/ .Which we deleted and created two target group for importing into different client as /DEV100/ and /DEV200/.
Now alll transport request which has been assigned to /DEVALL/ are coming as a local request and after released they were not going to import in any of the client.
Please let us know the way by which we can assign new target group (/DEV100/ and /DEV200/) to all these change requests (TR's).
As we can manually assign target to change request at the time of import.But we want to find out the way of assign target group before releasing the TR's
Thanks in advance for your valuable and fast response.

Hi Sumit,
I am only aware of making this change using transaction se09 and se10. You select the change request number 'Not the task' by double clicking on it. In the resulting screen, select the properties tab. The 'Target' field in the screen can be used to perform the reassignment.
Sajit

CHaRM-Is that possible to create multiple Transport Request in UC

HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
Ava

Hi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type     StatProf         UserStatus     Seq     Action in SAP Change Manager
SDHF             SDHFHEAD   E0002            10       CREATE_HF
SDHF             SDHFHEAD   E0002            20       CREATE_REQ
SDHF             SDHFHEAD   E0002            30       SAVE_PARTNER
SDHF             SDHFHEAD   E0002            40       SET BO LINKS
Where SDHF - Ur.gent Correction
           E0002 - In Development
           CREATE_HF -        Create an Instance in SAP Change Manager
           CREATE_REQ -     Create Transport Request with Task
           SAVE_PARTNER - Save Partners in Respective Partner Roles
           SET BO LINKS -     Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava

Creating Multiple XML target file

HI Experts,
I would require some guidance from you. I have a situation whereby, I have to create multiple XML target file based on records.
The job in my hand is to extract the customer master from ECC and load it into XML files. But the catch is I need to create one XML file per customer. ie if my source has 500 customer then i have to create 500 XML and each XML file should contain all the information for that customer.
Can anyone guide me how to split the target XML in a single job. i.e. One XML per record of source data.

Hi Dirk,
Please find the below screenshot of job
workflow
Initialization Script
While LOOP
Increment Script
data flow
Target XML
Please help me with this.

Unable to create multiple link pulldown menu

Hi, I'm trying to create an animated pulldown menu. It works
when I TEST MOVIE, but when I put it in my Flash web page, the
getURL code link does not work.
Also, in the TEST MOVIE, it only works for one link on the
pulldown at a time. As soon as I add another link on the pulldown,
it cancels out the previous one.
My code is attached (graciously contributed by another
forum-ite): I have a WOMEN button at the top that changes color on
rollover and produces the pulldown with several choices. One of the
choices is "What's New" and is a movie clip and instance. I have
this file separate from my index file, called to in the last frame
of my actions menu using loadMovieNum. The site is
HERE for you to see the
issue. Any help is appreciated!

Hi Syed,
           You can create multiple target systems only for different business system groups.If all the business systems like R3_QA1,R3_QA2, R3_QA3 belong to the same business group "QA_BUS_GROUP" , then you can have only one among the three system as target.
           So R3_DEV can have only one system as target either R3_QA1 Or R3_QA2 or R3_QA3 since they belong to the same business group "QA_BUS_GROUP".
            If there are three different business system groups then you can have 3 target systems that correspond to their respective business system groups ,in this case source business system can be assigned to the 3 target systems that belong to different business system groups .
           Since that is not the case with your scenario, you cannot create multiple target systems.
Regards,
Laawanya

Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
<b>What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? </b>
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

One Profile set multiple profiles & target groups

Hi Experrts,
Can any one please tell me what is the advantage of creating multiple profiles and target groups under one profile set.
Any help will be greatly appreciated,
Thanks in advance
Regards
Suvitha

Hi,
Multiple TGs in a Profile set will be effective on the way you use them in the campaign.
In campaign, you can use either a TG or a Profile Set. If you are using PS, all the TGs in the PS will be used. Otherwise, you can use the TG individually. It depends on how you use it.
BR, Sathish R

Create Tasks for target group.

Hi guys.
I want craete Tasks for target group.
But, I don`t see "Employee Responsible" in "Create Business Transactions for Target Group Members".
How can I set Employee Responsible for Tasks?
Thanks.
Sergey.

Hi Sergey,
What i observed while creating Task from TG is we dont have fileds from where we can assign Emp responsible, as in Task Partner detemination(Standard) Access sequence we use for Emp responsible is User, and when we create Task from TG sytem takes User's Id as a Emp reponsible i.e. using which user u r creating Task from TG.
Regards,
DD's

Unable to create multiple Purchase order base on One Purchase requisition

Dear All,
I have problem to create multiple POs base on one PR.
For example, PR is automatically created after a Sales order which contain 10 pec of Material A. A PO is created for 4 pec of Material A first which is no problem, but when it come to create second PO for the remaining 6 pec, the system respond with a error message. "Materials for PReq 10167146, item 00010, already partially ordered, Message no. 06 249"
I have searched for the SAP Note to solve this problem, the Note number is 202011, to solve the problem I need to import
SAPKB46B03 and SAPKB46B04 for my 4.6B system. However those two package had already installed into the system long time ago, and the problem is still not solved. The currect level of PS is SAPKB46B57. And I was advised not to re-import the PS (SAPKB46B03 and SAPKB46B04) again.
Could anyone please tell me is there any other solution to get around this problem.
Thanks for your time
Alvin

Hi
Thank you very much for your quick response.
As the same user is able to process the idocs of message type PORDCR which are in status 64 successfully previously.
Regards,
Phani Miriyala.

ChaRM: Creating multiple transport requests

Hi Team,
I am working with Sol MA n Charm urgnt crction (SDHF). I am executing the action "Create Transport Request". The pop-up appears to create the tranpsport request. I have selected both workbench and customizing requests. The transport request got created successfuly in the ECC DEV system. Now i am trriggering the action "Create New transport request". The same pop-up appears. Now i am selecting, ustomizing requesting check box. The action is executed successfully. But the transport has been NOT created in satellite system. Why it so? Can't we have two opencustomizing requests for urgnt corction (SDHF)?
Or any configuration required to enable this?
Regards
PSK

You cannot have more than one open request for the urgnt correction.if u want to create new request , you should release the existing one You can always create tasks in the open TR.
Regards,
Sam

Transport targets for single SLD for (Dev & QA), another SLD for (prod)

Hi All,
My landscape is
systems: DEV ( Dev & QA )----->PRD ( prod ).
i.e, Development and Quality in one sys DEV , Production in the other PRD.
i have two business systems in DEV :
1) BS_Dev1
2) BS_Dev2
i created a group for these , say DEV_GROUP
As Dev and QA are under one SLD, there is no need of quality group right?
so i have created business sys in DEV:
which points the target business systems for BS_Dev1 & BS_Dev2
1) BS_Pro1
2) BS_Pro2
and created a target group for these, say PRO_GROUP
So my question is , as there is no QA in landscape
this would be the procedure to create the Groups and target systems for the objects of DEV (Dev & QA ) to PRD.
And then transport the objects from DEV (SLD -> Administration -> Content -> Export)
to PRD (SLD -> Administration -> Content -> Import).
Correct me if i am wrong.
Thanks
Sai

Hi SAI,
Check the [LINK|http://www.****************/Tutorials/Basis/Transport/Index.htm]
came across few blog on PI transport process..hope it helps:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards,
Naveen.

SCOM 2012 - Is there a way to create a class/target/group based on the presence of a folder?

I need to create monitor(s) for an application, but the application services are different on all the servers. Usually I would find a application service that is common among all the servers I want to monitor to create the target,
but this does not exist. There are no common services for this application. However, every server does have a common folder in the Program Files on the C: drive (i.e. "xyz" folder exist on every server for the application).
Is there a way to create a target based on a folder in the Programs Folder?

Please refer to the following, which is quite exactly fit your requirement.
http://msdn.microsoft.com/en-us/library/bb437613.aspx
Roger

Unable to create KM transport package

In Content Admin>KM Content> Exports>Archived exports> user cant see anything in Archives and log is showing error:
01-Jul-2009 03:12:27     Info     Starting export "static content - Facilities" (003aebeb-1a48-2c10-2bb8-cffcc4b5861e) using mode "FileSystem" (ConstantID=true)
01-Jul-2009 03:12:27     Info     Exporting to "
entlgw-sap01\sapmnt\PG0\SYS\global\config\cm\expimp\export\003aebeb-1a48-2c10-2bb8-cffcc4b5861e"
01-Jul-2009 03:12:28     Error     Cannot write file "0000/000/meta.txt"
01-Jul-2009 03:12:28     Error     1. Error: Cannot export resource "/documents/StaticContent/Facilities/FM Apac Related Sites" (java.io.IOException)
01-Jul-2009 03:12:28     Info     Export "static content - Facilities" (003aebeb-1a48-2c10-2bb8-cffcc4b5861e) finished with 1 errors after 0 minute(s) 1 second(s)
Can you please suggest on this error and how it can be rectified.

Use ICE offline method for transporting the KM content. It is very easy
check the below link for step by step procedure
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802c1739-d270-2910-ad9f-f369de07c1bf
Raghu

Unable to create multiple transport target groups in SLD

Similar Messages

Maybe you are looking for