Unable to create new records with FOX formula (IP)

Dear Guys,
We created a FOX formula that could not create any records within an empty infocube (got 0 records read, 0 created, 0 changed, 0deleted). how to change this formula to make sure record are created?
DATA K_0FISCPER3 TYPE 0FISCPER3.
FOREACH K_0FISCPER3 IN SELECTION.
{ 0AMOUNT, K_0FISCPER3 } = 100.
ENDFOR.
Many thanks!
Kind Regards
Olivier DESFOUR

Hello,
this behaviour is explained in the docu.
Internal Data Objects and Address
The internal data objects that are edited are subsets of the transaction data contained in the planning package. The user executes a planning function by selecting a package and a parameter group. This package is divided into smaller data objects made up of transaction data. If a formula requires reference data, these data objects are also created from this reference data. Note: If it is not possible to create data objects, a formula is not executed.
You will find this detailed docu, if you press F1 in the formula editor in transaction BPS0.
For BI-IP this detailed docu will be part of one of the next docu shipments.
The docu belongs to the data element UPC_Y_FLINE. Therefore you can access the docu from the transaction SE11. Choose data type = UPC_Y_FLINE. Press the button DISPLAY.
Best regards
Hans-Juergen Schwab

Similar Messages

How to create new record with old values

Dear all
i have creation page with 45 fields are there
user will enter all the fields and save it will call to non editable mode
if user will click on change button it will call to editable mode
in that my requirement is user wont change among those ites(45 items)clcik on save again it will call to view mode
in that user will change any one of the value among 45 items and click on save button i need to create one more record in database
if user wont edit any one of the field out of 45 items i dont want to create new record in database
how can we achieve thsi functionality
Regards
Sreekanth

Hi Srikant,
When user may edit the record, the same row may get updated in vo. Thus over writing existing row instead of creating new row.
Approach1..
On the page where user may edit records, instead of presenting records of existing row, present copy of existing row. So
In AM... (Later on you can put vo logic to its proper place, i.e. vo java file)
public void viewPageCallSetup()
Row originalRow=vo.createRow();
Row dummyRowForEdit=vo.createRow();
//COPY THE ORIGINAL ROW TO DUMMY ROW. IF THERE IS DIRECT METHOD TO CREATE COPY OF EXISTING ROW, THAT MAY BE MUCH BETTER.
for(int i=0;i<vo.getAttributeCount()-1; i++)
dummyRowForEdit.setAttribute(i, originalRow.getAttribute(i));
vo.insertRow(dummyRowForEdit);
vo.setNewRowState(Row.STATUS_INITIALIZED);
vo.setCurrentRow(dummyRowForEdit);
call this method in contoller's processRequest..
string oid=pagecontext.getparameter("oid");
if(pageContext.getparameter("Purpose").equals("Edit")) //Means user clickED the edit button so we need to replicate the row
am. viewPageCallSetup(oid); //calling this method in am
else
In PFR...
if(pageContext.getparameter("Purpose").equals("Edit"))
am.xxcostedit(oid); //calling this method in am
in case user selects "Cancel" on edit form,we need to remove the duplicate row. So in AM write a method to remove the duplicate rowd on click of "Cancel" button on edit form.
Rest of the logic is same for "Save" button. Just say commit.
Abdul Wahid

SharePoint 2013 unable to create new column with existing column name

Hi Support,
I'm currently having a problem in creating my first custom list in my SharePoint site. When I tried to create a new columns with existing name, e. g "date reported" = Date/Time , "Due Date" =
Date/Time
It's prompt the error like this " The page at sharepoint.itechdomain.com says: The Column name that you entered is already in use or reserved. Choose another name." I've read some forum, someone say's they need javascript command
to fixs the problem. If these the solution for my problem, I'm not familiar on how to used javascript in my sharepoint.
Kindly help me how to fixs my problem as soon as possible.
Your comment or any suggestion would be greatly appreciated.
Thank you
Best Regards,
Bishelp

I already tried this procedure, but it doesn't work. Still the prompt says " The
Column name that you entered is already in use or reserved. Choose another name". Is there any solution for this kind of problem?
Let me know,
Thank you

Creating new records while querying existing record

Hi,
I have one master - detail form.
First i created 1 record. Request ID is the primary key. Now request id generated. For ex.: 10
Request Id, date, requestor , location, status fields are in header block.
In lines block, i hv some other fields.. and one field called 'Activity'.
While creating first record, the activity will be 'New'.
Then i'll query the record '10'.
when i'm changing the activity 'New' into 'Upgrade', it should create new record with new request ID.
How to do this?
I hv written procedure that, i'm taking field values to local variables. Then assigning the local variable values to field values.
It is not creating as new record. It overwriting the existing record with new values. Existing record is missing.
Pl. give steps.
Thanks
Kavi

Hi,
Okk, you will have to do two things. Create two trigger on block level on which you want to do your changes.
1. First trigger. (PRE-UPDATE)
In pre-update trigger u will have to write the complete insert statement into the same table with new req id. like
DECLARE
vReqNo DATA_TYPE;
BEGIN
SELECT MAX(REQ_ID)
INTO vReqNo
FROM your_table;
INSERT INTO your_table
(req_no, fields....)
VALUES
(vReqNo, :forms_values);
END;
2. Create 2nd trigger on block level (ON-UPDATE)
write in this trigger
NULL;
for viewing the inserted record. What u have to do is in ON-UPDATE after null; create one timer NO_REAPEAT.
and in timer u will have to set the block property to req_id = generated_req_id_from_pre_update_trigger and
execute_query;
hope it will work...
-Ammad

RH_INSERT_INFTY not creating new records

Hi All,
I am using the FM RH_INSERT_INFTY to insert new records in HRP1000.
See the below FM call :
CALL FUNCTION 'RH_INSERT_INFTY'
     EXPORTING
         fcode               = 'INSE'
         vtask               = 'D'
          order_flg           = 'X'
          commit_flg          = 'X'
          authy               = 'X'
          PPPAR_IMP           =
          OLD_TABNR           = ' '
          REPID               = ' '
          FORM                = ' '
            keep_lupd           = keep_lupd
     TABLES
          innnn               = it_i1000
     EXCEPTIONS
          no_authorization    = 1
          error_during_insert = 2
          repid_form_initial = 3
          corr_exit           = 4
          begda_greater_endda = 5
          OTHERS              = 6.
But instead of creating new records it is changing the existing record in HRP1000.
Actually I want to create new records with different long text and short text in different languages so in case object id and object type even the dates can be same but the language would be different.
So I need to create a new records with a different language key and different short text. But this function module is changing the existing object short text,long text and language.
Could you please reply at the earliest.
Thanks & Regards,
Poonam

Hi,
you're right, this function didn't create new record when i want to create a record with same object but have different language.
you can use this function for your problem : RH_INSERT_INFTY_DIRECT
i tried and it works.
CALL FUNCTION 'RH_INSERT_INFTY_DIRECT'
EXPORTING
    vtask                     = 'V'
KEEP_LUPD                 =
tables
    innnn                     = p1000
EXCEPTIONS
   NO_AUTHORIZATION          = 1
   ERROR_DURING_INSERT       = 2
   REPID_FORM_INITIAL        = 3
   CORR_EXIT                 = 4
   BEGDA_GREATER_ENDDA       = 5
   OTHERS                    = 6
Regards,

JDeveloper 10g Creating a new record with trigger sequence primary key

Hi there, I'm sorry to post this incredibly simple question and I'm sure that someone must have answered this on this forum before but the searching of this site is incredible slow and painful and after 30 mins I can't find help.
I am using a struts Data Action to create a new record in the database and then being forwarded to an edit page where I can enter the new details. Then when the details are entered I am clicking an update button and returning to a browse screen where I can either commit the change to the database or rollback. Sounds pretty simple but I am really struggling with trying to get the trigger of the number sequence to work properly.
Ideally I would like to click the create new record button and then the primary key/triggered sequence number is already displayed on the empty form...
... but if this is too tricky or not possible then I would like the user to either not enter any value in the key field (which currently causes error - JBO-27014: Attribute PoNo in PO_SYS_MODULE.PoSystemView1 is required) OR the user enters a number and the trigger overwrites this number with the next in the sequence.
I can enter a new record if I look in the manager console and see the next number in the sequence and then create the record using this number and then click commit twice, as the first time I get the error: JBO-25019: Entity row of key oracle.jbo.Key[154 ] not found in PoSystem. Or if I enter a value 5 times greater than the next in the sequence I have to click the commit button 5 extra times to get the sequence to match the input.
I hope that this lengthy explanation fills you in on my problem, there must be a simple solution to this and I will be VERY grateful to anyone who can help me.
Many thanks
Ben Sayers (clearly a newbie)

Hi,
ADF Business Components handles this for you - unless yo prefer doing this manually. In the Entity Object, set the PK attribute's type to DBSequence. Then create a database sequence and use a database trigger to add the sequence value on insert
Frank

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is:

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
while executing JSP:<%
* add.jsp
* Adds a new entry through EmployeeBean. This is a JSP that serves 2
* functions. First of all, when called with no arguments, it will display a
* table with a few input fields. The user should enter empNo, empName and
* salary of the new record to be added. When she submits this
* information, it is sent to this page again. If it is successful, then the
* user can continue adding new entries. If it is not, then the old data will
* be displayed, and a warning message will be shown to her.
%>
<%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
<%
// Make sure this page will not be cached by the browser
response.addHeader("Pragma", "no-cache");
response.addHeader("Cache-Control", "no-store");
// We will send error messages to System.err, for verbosity. In a real
// application you will probably not want this.
PrintStream errorStream = System.err;
// If we find any fatal error, we will store it in this variable.
String error = null;
// In a moment we will check if all columns were passed to this page
String param_1 = "";
String param_2 = "";
String param_3 = "";
long dptNo = 0;
String dptName = null;
// This variable indicates what function of this page is currently used. If
// this page is called with parameters, then a new entry should be
// added. In that case this variable is true.
boolean submitting = false;
// We will first attempt to get the reference to EmployeeHome from the
// session. The "list.jsp" page sets this attribute in the session.
DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
if (home == null) {
error = "No previous connection to DepartmentBean.";
} else {
// Attempt to get all 3 parameters from the session
param_1 = request.getParameter("DPTNO");
param_2 = request.getParameter("DPTNAME");
// If all 3 parameters are specified, then this is probably a submission by
// this very page. Note that if the user left one of the fields blank, then
// the corresponding parameter will be "", not null.
if (param_1 != null && param_2 != null) {
param_1 = param_1.trim();
param_2 = param_2.trim();
submitting = true;
// In the following variable we will store a (non-fatal) warning message. This
// message will be displayed in the page, but so will the submission form.
String warning = null;
if (submitting) {
warning = "";
// If there is an empty param_1, param_2 and/or param_3, then this will be noted
// in the warning message.
if ("".equals(param_1)) {
warning = "Null param_1 specified. ";
if ("".equals(param_2)) {
warning += "Null param_2 specified. ";
// If we don't have a warning message yet, then we will attempt to create
// a new record.
if ("".equals(warning)) {
try {
dptNo = (long)Long.parseLong(param_1);
dptName = new String(param_2);
Department rec = (Department) home.create(dptNo);
rec.setDptname(dptName);
// empty columns after insert for effect
param_1 = "";
param_2 = "";
// If we got this far, then there was no problem detected.
warning = null;
} catch (Exception e) {
// Set the warning variable to indicate a problem.
warning = "Unable to create new entry, caught: \"" +
e.getClass().getName() + "\", message is: \"" +
e.getMessage() + "\".";
// Decide what the title will be.
String title;
if (error != null) {
title = "Error";
} else {
title = "com.webstore | Add entry";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE><%= title %></TITLE>
</HEAD>
<BODY bgcolor="#FFFFFF">
<H1><%= title %></H1>
<%
// If there was a fatal error, then display the error message
if (error != null) {
%>
<P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
<%
// Otherwise display a table with fields to be filled in.
} else {
// If there was a warning, then display it.
if (warning != null) {
%>
<TABLE border="1" bgcolor="#FF2222">
<TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
</TABLE>
<%
} /* if */
// Display the table with fields. There are two columns. The left column
// contains the names of the fields, while the right column contains the
// fields.
%>
<FORM action="dptadd.jsp" method="GET">
<P><TABLE border="1">
<TR>
<TD><STRONG>DptNo:</STRONG></TD>
<TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
</TR>
<TR>
<TD><STRONG>DptName:</STRONG></TD>
<TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
</TR>
<TR>
<TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
</TR>
</TABLE>
</FORM>
<%
} /* else */
%>
<P><TABLE border="1">
<TR><TD>Back to list</TD></TR>
</TABLE>
</BODY>
</HTML>
Please guide me..

Rajive,
This is the same problem as in your other post:
sql is running very slow
So please refer to my answer there.
Good Luck,
Avi.

Unable to create new events in iCal

I updated my iPhone 4 to iOS7, and now when I try to create a new event in iCal, nothing happens. I am able to tap the "+" and enter the event information, but when I tap "Done", no new event appears in the calendar.
If I, instead, create the event in the Calendar on my PC, the phone syncs with Outlook, and the event appears on the phone's iCal app.
Why am I suddenly unable to create new events on my phone in iOS7, and how can I fix this issue?

Thanks! I've noticed the phone has been a bit "clunky" since the update too. Did you experience the same thing & did the hard restart help?

Unable to create new windows live id......the mess...

i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????

mallar wrote:
i m unable to create new windows live id.
the message have been shown that"your phone have too many windows live id,cant create new one..contact your senrvice provider"
i stolen my nokia music id password...so what can i do???????????????????
why would you steal your music id password? ..nokia id / account is different from windows live id btw.
maybe you already have a windows live account, thats why its showing the that problem. check settings > email+accounts > you should ideally have only one(1) 'microsoft account' in there. if you want to use another one, you might want to just 'change' the existing one with your new credentials.

Imported Form and sub-form from another database. Sub-form not creating new records tied to parent form's data.

I have imported all objects from an old access db (.adp file) into a new db (.accdb). All of my data lives in sql server so I have added all the tables and views to the .accdb as linked tables. My forms all connect to data, but I am having issues
with a sub form. The sub form does not allow for creation of children records tied to the parent record the way the old db did/does.
Correct - old format .adp file (notice the empty second record in sub-form with the defaulted date of today's date):
Incorrect - new .accdb file (notice the lack of empty second record in sub-form like above):
If I click the create new record icon in the bottom of the subform, it creates a completely blank record not tied to the parent record (fields blacked out in screen shots above). When using this button all parent record fields are blank.
I have also verified the child table used in the sub-form has a valid Fky relationship to parent table used in the parent form.

Have you checked each forms 'Filter' property (in Design view) to make sure they are blank and that each forms 'Filter On Load' property to make sure it is set to 'No'? Also, you might try inserting the following commands in each forms On
Open event:
DoCmd.RunCommand acCmdRemoveAllFilters
DoCmd.ShowAllRecords
If you can open each forms Record Source and they are showing that new records are able to be entered (the new record * is showing at the bottom of the recordset), then check each forms On Load and On Open events to make sure there is no filtering.
In addition, check any macro or VBA commands behind the button that opens the main form to make sure there is no SQL filtering in the DoCmd.OpenForm command.
If one of the forms Record Source does NOT allow new records, then you will need to change that Record Source so the new record * indicator shows.
Out of ideas at this point.

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

File Adapter - FTP - Unable to Create new pooled resource

Hi Friends,
I am getting the following error while using file adapter with FTP protocol...
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed.
Can someone help me to solve this probelm..
Regards,
Shyam.

Hi,
Try to check the directory you have specified in the CC and also check whether you are able to connect to the FTP server with those login credential and access the directory specified.
Also let me know whether it is working fine for other scenario's or not.
Regards,
Nithiyanandam

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

Java.lang.OutOfMemoryError: unable to create new native thread on Win2000

Dear all,
I install a java server (SAP J2EE) on the windows machine and run into the following problem: the total number of threads cannot exceed 1200 (as i see this in the task manager)
After it does reach this number no other tasks can be started. Thereafter i get java.lang.OutOfMemoryError: unable to create new native thread error .
However the other machine where the same distribution of Win2000 Server is installed can easily coupe with more than 2500 theads. The same is true when the safe mode on the first machine is on: I can generate more than 1200 threads. So it seems the problem has something to do with Windows itself.
I am really puzzled here, would really appreciate any help.
Thanks in advance,
Dimitry
Surkov Dimitry
[email protected]
+49.1632.492618

well, i do not supply any options when i start jvm, but it is not the course:
it also happens with c programs. however in the safe mode it works. both for c and for java program.
so it must be either some software (however memory is ok) or ...? i am lost. In some Unix system you can set the total number of threads allowed as an option in the kernal. But i guess this is not the case with windows.
Thanks a lot for your reply,
dimitry

Unable to create new records with FOX formula (IP)

Similar Messages

Maybe you are looking for