Unable to create new structure code for System Items flexfield

Hi
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Regards
Reem

Hi Everyone,
Lets address your exact problem ::
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Yes ! The answer is that this is exactly how it is supposed to work.
In Inventory :: [ System Items KFF ] is supposed to be single structure whereas Item-Categories has Multi-Structure option.
For every Single Instance :: It is like this only ~ as a standard functionality.
And this becomes very very challenging ( but a very fruitful & long lasting ) exercise.
Thrash it with the clients :: Why should you ever have 2-3 different Item codification schemas when its the same enterprise ?
They might respond with different intelligence incorporated in the Item Codes.
Most of the Intelligence can be shifted to the Item-Categories as they are not long lasting.
&&&& This means that either you can push for non-significant part numbering schema or the partial intelligence.
Keep it small & simple !!
Ajay Kuma, 510-456-5322

Similar Messages

Unable to create new structure to hold key figures - BI 7.0

Hi All,
I am trying to create a new structure in a query - this structure will hold restricted key figures. I right click in the Columns section and select New Structure. The system won't allow me to drag/drop the restricted key figure into the structure - it's added as another key figure in the existing structure. If I right click on the structure and choose New Selection, the key figures are not shown as options for adding to the structure ... only characteristics are listed. Any ideas on why this is happening?
Thanks,
Pam

Hi Pam,
i think cell restrction will solve your problem, i am not sure.
Just try to do cell restriction.
Just go throw the below description.
You can use any cell that you define in a formula. If you want to reuse the value from the implicit, generic cell definition that is automatically created at the intersection of the two structural components of a query, select this cell in the Cell screen area and, using the secondary mouse button, choose New Cell Reference. A description taken from the two structural components now automatically appears in the cell. The symbol shows you that a cell reference exists for this exception cell. Now you can reference this cell. You can continue to use the implicit cell definition and do not have to manually generate this value using a new selection.
Functions of explicitly defined cells:
Select a defined cell and choose the required function from the context menu (secondary mouse button).
● Edit
● Cut
● Copy
● Paste
● Remove
● Where-Used List
Before you delete a cell, you can check for the formulas in which the defined cell is used in the where-used list.
You reach the properties of a defined cell by selecting the defined cell. In the Properties screen area you can also make changes such as:
● Changing the description of the cell
● Changing the highlighting of the cell
● Hiding the cell ( if you do not want to see the values of the cell)
Help cells
In the Help Cells area you can define additional cells for help selections or help formulas. You can use the functions New Selection and New Formula in the context menu to define help cells that are not displayed in the query to serve only as objects for help selections and help formulas.
For example, you can define an invoice in a help cell and use this in a real cell to calculate a duplicated invoice.
a. Using the secondary mouse button, click on the empty cell next to Help Cells to reach the context menu. From here, choose New Selection.
b.Use Drag&Drop to drag the Invoice key figure into the right-hand Details of the Selection area.
c. Enter a description.
d. Choose OK. The cell contains the description of the selection. The symbol shows you that a selection exists for this exception cell.
e. Now choose New Formula from the context menu of the required cell of the query. The new formula that is not yet defined appears in the cell.
f. Select the new formula and choose Edit from the context menu.
g. Use Drag&Drop to drag the cell you have just defined, which you can find in the Available Operands window under Cells, into the Detail View window. Click on the button twice.
h. Enter a description.
i. Choose OK. The cell contains the description of the formula. The symbol shows you that a formula exists for this exception cell.
Result
You have defined one or more exception cells for a query.
Regards,
shailaja

Create new tax code for Belgium company code.

Dear friends ,
We are fighting to find a way to create a new tax code for a Belgium company that do the posting below:
Credit:       Supplier                   1000,00-       EUR
Debit:        GL Account X          1105,00        EUR
Credit:       Tax Account              105,00        EUR
Where the tax rate for the tax code is 10,5%.
Does anyone knows the config we need to do in the procedure TAXB-IVA Belgium , in order to allow SAP to post as we can see above
Tcodes:
OBQ1 / OBQ3
OBCN
OB40
FTXP
Thanks so much.
Alessandro

hi Allessandro,
Please check SAP Note 22842 - TAXB - Belgian tax calc. table - special cases, it clearly gives the configuration needs to be done in your case.
Regards
Girish BP

How to create new Batch No for An Item

Dear All,
I am doing Issue for production task through DI API. In that I need to Create a Batch no for an Item. That item was created as Batch with Release only in Item Master. Please help me how to create the batch no when I am Issue for Production ?.
Thanks,
lingam.

Dear Lingam,
If the process need manual selection as the one you are requesting, it will not be available to DI API. You may try UI API to see.
Thanks,
Gordon

Unable to create a 'computer image' for system recovery purposes using an external drive!

Just finished another very frustrating long session with HP Tech Support without a resolution to a simple problem.
This laptop is only 4 months old, but the hard drive is failing, according to constant notifications, and repeated BIOS hard drive diagnostic tests.
I wanted to be sure that all back-up/system restore precautions were taken. Not much to 'back-up' because the laptop is new. The standard 'back-up' was easily done on a 4 GB flash drive.
I followed instructions for 'create a system image' in order to make a 'copy of the drives required to restore your computer if your hard drive or computer ever stops working' (instructions right on the page).
I wanted to create this 'system image' on an external flash drive. First attempt at storing a system image failed because: 'the drive is not formatted with NTSF. The G flash drive was easily formatted to NTSF. Repeated attempts at copying now failed because: 'the drive is not a valid back-up location' (!?).
I see absolutely no clear reason why a 'computer image' cannot be created on a flash drive that has been correctly formatted.
HP Tech Support claims that the reason for this is a 'Windows incompatibility with the program' (used to create a 'system image?).
No solution was given. According to HP Tech Support, this is now a 'Windows software problem', which doesn't make any sense to me.
Standard CD-R data disks (the only ones I have on hand now) are not big enough: 700 MB capacity, but a DVD-R data disk, which has 4.7 GB capacity, may not be enough (especially in the future) for the creation of a 'system image'.
Since HP Tech Support is incapable of solving a straightforward problem like this, I am asking for some more experience tech geek to bring me up to speed on this whole issue of 'system image' creation, for the purpose of computer restoration, as I am hesitant to go ahead and remove the hard drive, if I haven't properly done everything to 'back-up' as much as I can.

Again: HP Tech Support cannot answer this question for me.
I posted the above problem onto the Windows Recovery forum also.
There are super-experienced people that view these questions. (I meant the term 'geek' in an appreciative way: without users solving problems, everything would grind to a halt!).
Please, if there is anyone who can comment on this, whether the whole issue of 'system image' is redundant, whether it is necessary at all, I would be grateful for a stab at this.
I have the sense that the answer is staring me right in the face, yet even HP Tech Support has no idea what it is.

Creation of new T.Code for customization update

Dear All,
As per standard SAP, the below given configuration need to maintain directly in production system (not through transport).
SPRO -
> Logistics - General ---> Tax on Goods Movements ---> India ---> Master Data ---> Assign Users to Material Master Screen Sequence for Excise Duty ---> User screen reference
The above cofiguration update the view V_USRM0_R. However as per my client policy, changes (configuration change) are not allowed directly in production system. All configuration change should be through SAP transprot. Also the view is not possible to maintain by T.code - SM30(since it is a cross client & we don't allow to chanage any cross client data). The above change we use quite frequently.
Is it possible to create new T.Code for maintaining the above data? Mean to say, a new enhancement for maintaining view V_USRM0_R.
Your input should be highly appreciated.
Regards,
sp sahu

I got the answer

Need to Create New Commodity Codes....Please Help.

Hi All Experts,
I need to create new Commodity Codes for DE - Germany. The code numbers with the descriptiones I got from the Business user, there are 5 new codes.
I need to know how to create these commodity codes and what I have to maintain for the fields like -
Description:
Specific unit of measure:
Sec unit of measure:
Additional Info:
Min. Oil Product:
It is highly appriciable if you all can please suggest me the complete process for this.
Please help me ASAP. Thanks to you all in advance.
Best Regards....
Somraj.

90308930 u2013 Measuring fixture
Description
Electronic instruments and appliances fo
r measuring or checking electrical quant
ities, without recording device, n.e.s.
n.e.s.
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
85423910 u2013 Amplifier
Comm./imp. code no.   85423910
Description
Electronic integrated circuits in the fo
rm of multichip integrated circuits cons
isting of two or more interconnected mon
olithic integrated circuits as specified
in note 8 (b) (3) to chapter 85 (excl.
such as processors, controllers,
controllers, memories and amplifiers)
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
85339000 u2013 Resistor
Description
Parts of electrical resistors, incl. rhe
ostats and potentiometers, n.e.s.
Spec.unit of measure
KG   Kilogram
Additional info
2    Dispatch / Export
Not idea, as I can't find these on my system
82032000 u2013 Tool, gripper
85044082 - Rectifier
Try following link, I believe that can be helpful to you.
- +_Customs-Tariff-Number_+
Regards
JP

Create new tax code

Hi,
How to create new tax code for Import tax + 2 % CST with the following details:
Quantity                                        Basic rate                      Amount
15595                                             0.50                               7798
Custom duty BYP                           4%                                 292                 NCR
                                                                                8090
Basic Excise duty                           10%                                809                   CR
Edu. Cess on BED                            2%                                16                     CR
Sec.Ed. Cess on BED                       1%                                 8                      CR
                                                                                8923
Edu. Cess on TOT 2% BYP                2%                                23                    NCR [29280916+8]*2%
Sec.Edu. Cess on TOT 1% BYP         1%                                 11                    NCR [29280916+8]*1%
                                                                                8957
CST                                                       2%                              179                      NCR
                                                                                9136
Thanks & Regards,
Swati

Hi,
What is the tax procedure you are using? Is it TAXINN? If yes then you need to define condition Types in OBYZ and mainatin the same in TAXINN,
in Create Tax Code E1 and in FV11 maintain Tax rate for this Tax Code against Condition record of Excise and CST.
Hope this helps!!
Br,Vivek

Steps to create new Tax Code

Dear all,
Please let me know the steps to create new tax code for WCT(Work Contract Tax) as per given conditions .
Description:     WCT @4% + Service Tax @10.3% on 33% of Basic Value.
Basic Amount                                                                  : Rs. 10,00,000
Add : WCT @4% on Basic Amount (Deductible)            : Rs. 40,000
Add: Service Tax @10.3% On 33% of Basic Amount    : Rs. 33,990
Total Order Value with taxes                                          : Rs. 10,73,990
TDS deducted @2% of Total Order Value(Deductible)   : Rs. 21,479.8
( Please note: WCT @4% to be deducted : Rs.40,000.00
TDS deducted @2% on Total Order Value : Rs.21,479.80 )
Thanks & Regards,
Ashutosh

Dear sir
Thanks For reply, i have done following activities..
Created WCT condition type ZWOR
Created TDS Condition type   ZTDS
Already have Condition type for service ZEC1
Maintained TAX Code u201CSEu201D   in FTXP
Assigned Below given condition type in FV11
ZTDS @ 2%      ZWOR @ 4%      ZEC1 ???? (not Done)
Please let me know that how to create below given things
a) ZSER ( here ZEC1) 33 % on basic value to be created.
b) JSVD for 10 % on ZSER
c) JEC3 for 2 % on ZSER
d) JSE1 for 1% on ZSER
Whether for step (a) I have to go to FV11 and assign SE with 33 %     ?
Please guide step by step
Thanks & Regards,
Ashutosh

New tax code for non excisable plant

Dear all
Please suggest solution for following scenario
We created new comp. code and assign new plant, this plant is non excisable, my problem is that can I used same tax code which is I created earlier for first co. code or I have to create new tax code for new plant, these taxes I have to inventories on material, I am using tax inn and tax classification ***.sequence.
Vipin

Hi Vipin,
from my point of view you can use the same tax codes.
to inventorise the duties you have to make little change in the process.
while doing GRN if the material is excisable then the tabs will open. now you have to go to excise item tab and there you have to choose noncenvatable in the dropdown menu that is the material type.
in this way you can have the results you need.
regards,
Adwait Bachuwar

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

BEA-002606 Unable to create a server socket for listening on channel

Hi,
I am trying to stand up JDEVELOPER suite 11.1.2 on Windows 7 64 Bit.
When I sreate a sample app and try to compile, I get the error:
<Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.56.101 might be incorrect or another process is using port 7102: java.net.BindException: Cannot assign requested address: JVM_Bind.>
This IP is not active on my machine, although it was initialized at one point through a VBox instance I installed. I have tried to clean off the VBOX instance and the JDEVELOPER, rebooting between loads. Can anyone help me get what look like a ghost IP off my machine. Note: I set the weblogic server to port 8003, so I am also not sure why itis looking at port 7002.
Thanks
JT

It is the integrated server. I have taken everything off (JDev adn VBOX) and cleaned some of the hard to find file structures just to make sure there wasn't a hidden config file I was missing.
I am new to Web Logic, so I was hoping to get the integrated server running first and then learn the ins and outs of deployment to a production system.

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is:

Warning: Unable to create new entry, caught: "javax.ejb.CreateException", message is: "Error creating EntityBean: Io exception: The Network Adapter could not establish the connection".
while executing JSP:<%
* add.jsp
* Adds a new entry through EmployeeBean. This is a JSP that serves 2
* functions. First of all, when called with no arguments, it will display a
* table with a few input fields. The user should enter empNo, empName and
* salary of the new record to be added. When she submits this
* information, it is sent to this page again. If it is successful, then the
* user can continue adding new entries. If it is not, then the old data will
* be displayed, and a warning message will be shown to her.
%>
<%@ page import="com.webstore.*,java.io.*,java.util.*,javax.naming.*" %>
<%
// Make sure this page will not be cached by the browser
response.addHeader("Pragma", "no-cache");
response.addHeader("Cache-Control", "no-store");
// We will send error messages to System.err, for verbosity. In a real
// application you will probably not want this.
PrintStream errorStream = System.err;
// If we find any fatal error, we will store it in this variable.
String error = null;
// In a moment we will check if all columns were passed to this page
String param_1 = "";
String param_2 = "";
String param_3 = "";
long dptNo = 0;
String dptName = null;
// This variable indicates what function of this page is currently used. If
// this page is called with parameters, then a new entry should be
// added. In that case this variable is true.
boolean submitting = false;
// We will first attempt to get the reference to EmployeeHome from the
// session. The "list.jsp" page sets this attribute in the session.
DepartmentHome home = (DepartmentHome) session.getAttribute("DepartmentHome");
if (home == null) {
error = "No previous connection to DepartmentBean.";
} else {
// Attempt to get all 3 parameters from the session
param_1 = request.getParameter("DPTNO");
param_2 = request.getParameter("DPTNAME");
// If all 3 parameters are specified, then this is probably a submission by
// this very page. Note that if the user left one of the fields blank, then
// the corresponding parameter will be "", not null.
if (param_1 != null && param_2 != null) {
param_1 = param_1.trim();
param_2 = param_2.trim();
submitting = true;
// In the following variable we will store a (non-fatal) warning message. This
// message will be displayed in the page, but so will the submission form.
String warning = null;
if (submitting) {
warning = "";
// If there is an empty param_1, param_2 and/or param_3, then this will be noted
// in the warning message.
if ("".equals(param_1)) {
warning = "Null param_1 specified. ";
if ("".equals(param_2)) {
warning += "Null param_2 specified. ";
// If we don't have a warning message yet, then we will attempt to create
// a new record.
if ("".equals(warning)) {
try {
dptNo = (long)Long.parseLong(param_1);
dptName = new String(param_2);
Department rec = (Department) home.create(dptNo);
rec.setDptname(dptName);
// empty columns after insert for effect
param_1 = "";
param_2 = "";
// If we got this far, then there was no problem detected.
warning = null;
} catch (Exception e) {
// Set the warning variable to indicate a problem.
warning = "Unable to create new entry, caught: \"" +
e.getClass().getName() + "\", message is: \"" +
e.getMessage() + "\".";
// Decide what the title will be.
String title;
if (error != null) {
title = "Error";
} else {
title = "com.webstore | Add entry";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE><%= title %></TITLE>
</HEAD>
<BODY bgcolor="#FFFFFF">
<H1><%= title %></H1>
<%
// If there was a fatal error, then display the error message
if (error != null) {
%>
<P><BLOCKQUOTE><%= error %></BLOCKQUOTE>
<%
// Otherwise display a table with fields to be filled in.
} else {
// If there was a warning, then display it.
if (warning != null) {
%>
<TABLE border="1" bgcolor="#FF2222">
<TR><TD><FONT color="#FFFFFF"><STRONG>Warning: <%= warning %></STRONG></FONT></TD></TR>
</TABLE>
<%
} /* if */
// Display the table with fields. There are two columns. The left column
// contains the names of the fields, while the right column contains the
// fields.
%>
<FORM action="dptadd.jsp" method="GET">
<P><TABLE border="1">
<TR>
<TD><STRONG>DptNo:</STRONG></TD>
<TD><INPUT type="text" name="DPTNO" value="<%= param_1 %>"></INPUT></TD>
</TR>
<TR>
<TD><STRONG>DptName:</STRONG></TD>
<TD><INPUT type="text" name="DPTNAME" value="<%= param_2 %>"></INPUT></TD>
</TR>
<TR>
<TD colspan="3" align="center"><INPUT type="submit" value="Add this entry"></INPUT></TD>
</TR>
</TABLE>
</FORM>
<%
} /* else */
%>
<P><TABLE border="1">
<TR><TD>Back to list</TD></TR>
</TABLE>
</BODY>
</HTML>
Please guide me..

Rajive,
This is the same problem as in your other post:
sql is running very slow
So please refer to my answer there.
Good Luck,
Avi.

Unable to create new structure code for System Items flexfield

Similar Messages

Maybe you are looking for