Unable to create opportunity CRM

Hi,
one User unable to create opportunity in CRM.That tab came as disable for that only perticuler user.
Regards'
Kumar

Hi Kumar,
As mentioned by Gobi, please check the PFCG role and also run the trace with the help of basis colleague to check the missing authorizations.
Hope this will be helpful.
Regards
DJ

Similar Messages

  • Unable to create followup activity in crm portal

    Hi All,
      When we are trying to create a follow-up document for an activity all the fields are
    getting grayed out and we are unable to create any follow-up document.But from GUI we
    are able to create it successfully.  We are using CRM 5.0
    I have given all the necessary authorizations and the sales representative role is also added still the issue is seen.
    please suggest
    Thanks & Regards,
    Swetha

    You need to maintain blueprint table entries for the Back End CRM roles that you have created. Goto Transaction CRMC_BLUEPRINT_C navigate to Navigation(URL generation) "Assign object Method to Role" .
    Add a new entry for your custom role if you have assigned the custom role in portal to the Enterprise Profile and under object type select the type of object you are trying to create followup(Example Opportunity,Order) , Method type is "Application" and Implementation Type : S - BSP as external Service and in ID Page/Service give the PCD location of the Portal Role that you are using.
    Regards,
    Swami
    Reward points if it helps.

  • Unable to create Business Partner in CRM

    Hi I am unable to Create a Business Partner (BP)in CRM though I could  see that the INBOUND  IDOC ( Msg type : CRMXIF_PARTNER_SAVE_M ) is getting posted.I created the IDOC through the test transaction (we19).Also i dont have any data to give in the field PARTNER_GUID without which the IDOC was failing.So i took an existing value from the table BUT000 and used it and it posted successfully but still the BP is not getting created in the system.Request you to pls suggest a solution..

    Kanth,
    You dont have to populate BP IDOC with partner guid.System generates partner GUID whenever BP is created.
    Try to create a BP without populating guid.
    Thanks,
    Thirumala.

  • Unable to create follow-up document in Portal

    Hi,
    We are using NetWeaver Portal 7.0 and it is at the latest SP(SP10).
    When we are trying to create a follow-up document for an opportunity all the fields are getting grayed out and we are unable to create any follow-up document.But from GUI we are able to create it successfully.
    Also we are unable to create any sub-opportunity for the existing opportunity
    Both the above were possible when the portal was on lower SP(SP8)
    Does this issue have anything to do with the SP upgrade or could there be any other reason.
    Any inputs on the above issue would be of great help.
    Thanks and Regards,
    Vijaya Sai.

    Hi Chen,
    The problem the you are facing mostly occurs due to incorrect assignment of roles. The user id that is used in the EP needs to be present in the CRM backend system as well. The CRM Backend user has to be assigned to the corresponding single role.
    Portal user needs to be assigned to a Portal Role.
    Kindly have a look at the following document which will give more
    information on the role configuration.
    Please find the related documentation under:
    -> http://service.sap.com/crm-inst
    -> People-Centric CRM Inst. a. Config. Guides (on the left side tree)
    Kindly have a look at the guide for CRM 5.0
    This will give a clear picture on how to set up follow ups. Hope this helps. Please let us know incase you need more information on the same.
    Regards,
    Hemanth

  • Unable to create a report in bi publisher 10g

    Hi All,
    Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
    Operation failed: /abcd/abcd.xdo.
    When we tried to create a report with the existing name, it is saying
    An object with the same name already exists: /crm/crm.xdo
    I can say this is not any permissions problem, I have logged inwith Administrator user.
    Thanks

    Hi,
    Can any one..???

  • Error when trying to create Opportunity

    Hi All,
    When I am trying to create opportunity in CRM 2007 getting an error as mentioned below
    1) An exception has occurred during program processing
    2) You have no authorization for organizational level for the transaction
    Can some one please explain why this error is coming?
    Component in which I have to check for analysis.
    Thanks,
    Srinivas

    Hi,
    Try to figure out which action/event triggers the auth check in your create oppt screen. Set the an external break-point to start the debugger and while the debugger is on set a break-point at statement 'AUTHORITY-CHECK'. This will set a break-point at all the the auth check statements automatically. Execute the program, the system stops at the statement  'AUTHORITY-CHECK'. Now check that auth check passed or failed based on SY-SUBRC value.
    Add the authorization to your user role based on this information.
    Regards
    Prasenjit

  • Unable to create position hierarchy in organization model

    I was unable to create position hierarchy in organizational hierarchy. I want to maintain position hierarchy within an organization. But SAP CRM is not allowing that. I was able to create organizational hierarchy. Please let me know, how can I maintain the position hierarchy within the same organization?
    --hari

    Hi hari,
    it is only possible to have a hierarchy with two levels on position level. Therefore you create two positions below your organization (tx ppoma_crm). At one of these positions you set the flag "Head of own organizational unit" at the Basic data tab of the position (To see this, you need to display the Details of the positions at the bottom of the screen). Now you can assign a business partner (or more)  to this position which is (are)  the Head of this unit.
    If you need a more complex hierarchy you have to use organizations to show this.
    Hope it helps!
    Kind regards
    Christian

  • Report to Create Opportunity

    Hi Experts,
    I have a requirement that, to write a report program to "create or update opportunity".
    I am new in CRM, Can anybody help me to do this?
    Thanks in advance,
    Saju.

    Hello Saju Mohanv,
               You can use BAPI_OPPORTUNITY_CREATEMULTY to create an opportunity and to change BAPI_OPPORTUNITY_CHANGEMULTI. Before you create or change please check weather you have authorization to create or change any business transaction. T.Code : CRMD_ORDER open this and create opportunity by using proper inputs.
                Well comes to report program use above bapi which i have given. Well before this you have to check what all the inputs you have provide for that bapi's. For that you can check in CRM_ORDER_MAINTAIN fm. Put a break point in that FM and create opportunity in CRMD_ORDER t.code. Check what all the inputs coming in ADMINH, OPPORH, PARTNER,  INPUT_FIELDS ect.,  Related your report. You pass the same inputs to your bapis. Let me know your status after this.
    Regards,
    Nizamuddin.

  • Need Standard BAPI To Create Opportunity in SAP Using Java Connector.

    Hi All,
         What is the standard BAPI to create an opportunity in SAP CRM through Java Connector.
    Please share code if available for doing same. I have found BAPI_OPPORTUNITY_CREATE_MULTI .
    How to create opportunity in SAP through java connector using BAPI_OPPORTUNITY_CREATE_MULTI .

    Hi,
    I think you can search for it or you can create a thread at ABAP section.

  • RFC Error: Unable to create Metadata connection for Dictionary Provider

    I configured two RFC ('WD_XXX__MODELDATA_DEST and WD_XXX_RFC_METADATA_DEST). I tested it and it shown green light.
    When I run my application that coonnect to CRM using RFC, I got the following errors:
    <i>com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.xxx.types.Syuname could not be loaded: com.sap.dictionary.runtime.DdException: 'WD_ICEBERG_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
         at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:670)
         at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:443)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:381)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:410)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:79)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:121)
         at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:117)
         at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:207)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
         at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:690)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:560)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:311)
         at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:204)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:347)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:268)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:40)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.dictionary.runtime.DdException: 'WD_XXX_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_XXX_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:225)
         at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
         at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
         at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
         at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
         at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         ... 49 more</i>
    I understand that I need to configured the Metadata Dictionary type for the RFC. For this, I need to configure the Message Server properties (for load balancing).
    But my Basis guy told me that CRM is an application server, so we only can configured with application server properties. Is this true? (I really doubt it) That is no Message Server connection to CRM system now.
    If it is true, how can I create a RFC connection to CRM system?
    Thanks for help.
    Kent

    Hi KC,
    Try the following links, they may help you.
    http://help.sap.com/saphelp_nw04s/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/content.htm
    JCO connection
    Using the SAP Enterprise Connector for generating BAPI Proxy Classes
    points if useful
    Thanks
    Suresh

  • Unable to Load Database/Unable to create database.

    RoboHelp 6.0 on my PC is suddenly unable to open existing
    projects or create new ones. The problem is not in the projects, as
    other people can unzip the same set of files and open them with
    RoboHelp on their PCs.
    The Details:
    When attempting to open an existing project (any project
    whether in version control or not), I get the message " Open
    project was cancelled or the application was unable to load
    database for..."
    I found the article that says to delete the CPD and XPJ files
    and then to use the Edit option to open the HHP file so that
    RoboHelp will recreate the two files. When I try that, I get the
    message "Unable to create database. Check that the directory is not
    read-only." It's
    not read-only.
    When I attempt to create a new project, the application acts
    like it is going to create one, but it just creates a project
    folder without the new first topic and then repeats the New Project
    Wizard window that prompts for title, etc. It will keep creating
    folders and returning to this window in a loop without ever really
    creating a project.
    RoboSource Control is functioning normally, by the way.
    I have uninstalled and reinstalled RH 6 several times, and
    have even uninstalled RH 6 and installed to RH 5 just to see if it
    could open projects, which it does with no problems. After that
    test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
    the same problem all over again.
    This started happening after I uninstalled other unrelated
    software and received a message that some Service Pack 2 files had
    been changed and prompting me to insert the Service Pack 2 CD,
    which I don't have. This is because our IT department pre-builds
    our systems from an image and then distributes job-specific
    applications over the network. IT tried repairing Service Pack 2,
    but that didn't work. I'd like to uninstall and reinstall Service
    Pack 2, but the IT person says it's too risky on a system that was
    built from an image.
    We would like to find out
    which files RoboHelp is looking for when it launches a
    project so we can replace those files manually. Does anyone
    know what they are or have another suggestion that might fix the
    problem?
    Otherwise, I am stuck having to allow IT to rebuild my
    system. That means reinstalling and reconfiguring everything on it,
    just as if I were upgrading to a new PC. This can take a whole work
    week. However, I have already spent close to a work week on this
    problem, so maybe rebuilding would save time in the long
    run.

    Problem Resolution = HHA.dll
    For anyone who might be interested in the resolution to this
    issue, we did rebuild my PC and reinstall all of my software. The
    RoboHelp installation "complained" that I did not have HTML Help
    Workshop on my system and told me to download version 1.4 from
    Microsoft. I did have HTML Help Workshop..it's in my programs list.
    (It's not listed in programs on my co-workers' PCs, and they were
    not having problems, by the way.) But to make RH happy, I
    uninstalled the workshop and tried to install the version from
    Microsoft. But a message informed me that I already had a newer
    version of the workshop on my system, and I was back where I
    started. I could open projects, but there were weird problems.
    Selecting Topic Properties was met with an error message, and when
    the properties window opened, I could only see whatever template
    was assigned (or none if the topic had lost its template), and
    there was an extra section for Oracle help.
    So I started dinking around in the registry to see if I could
    get rid of any traces of the workshop so I could install the
    version RH wanted or to find any other clues to my problem. Under
    HTMLHelpAuthor, there was a reference to an HHA.dll file located in
    C:\WINDOWS\system32...only the file did not exist on my system.
    (Remember that my original problem was that some Service Pack 2
    files were either modified or missing.) So I did a Google search on
    that file name and found out that HTML Help Workshop is included in
    newer Windows operating systems, but that people used to have to
    get HTML Help Workshop from Microsoft, and that some people had
    made the mistake of just putting the HHA.dll file into the
    C:WINDOWS\system32 folder without also installing HTML Help
    Workshop. At this point it was obvious that I needed the HHA.dll,
    so I got it from a co-worker's PC. (Looking at the registry
    entries, I can also see that my system was built with a slightly
    different version of the operating system than my co-workers have.)
    Adding the HHA file to my system solved the problem. All
    projects but one were fine; one was still exhibiting the strange
    behavior. I fixed it by going back to the RoboHelp 5 version of the
    project and re-converting it to RoboHelp 6.
    I suspect that if I had known about the HHA.dll file before
    we rebuilt the PC, I could have solved the problem without going
    through that painful process. That is why I thought I should post
    the solution even though it was after the rebuild.

  • Unable to create report. Query produced too many results

    Hi All,
    Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
    the large amount in the grid anyway?
    I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
    Here Event Viewer log error at the server:
    1. An exception occurred while running a report.  The following details may help you to diagnose the problem:
    Error Message: Unable to create report. Query produced too many results.
            <br>
            <br>
            Contact the administrator for more details.
    Dashboard Name:
    Dashboard Item name:
    Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
    Request Duration: 6,220.93 ms
    User: INTRANET\spsdshadmin
    Parameters:
    Exception Message: Unable to create report. Query produced too many results.
    Inner Exception Message:
    Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
       at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
       at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
       at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
    PerformancePoint Services error code 20604.
    2. Unable to create report. Query produced too many results.
    Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
       at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
    PerformancePoint Services error code 20605.
    Thanks in advance for your help.

    Hello,
    I would like you to try the following to adjust your readerquotas.
    Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
    On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
    \Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
    Locate and change the the below values from 8192 to 16384.
    Open the Client.config file. The file is located in the following folder:
    \Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
    Locate and change the below values from 8192 to 16384.
    After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
    <readerQuotas
    maxStringContentLength="2147483647"
    maxNameTableCharCount="2147483647"
    maxBytesPerRead="2147483647"
    maxArrayLength="2147483647"
                  maxDepth="2147483647"
    />
    Thanks
    Heidi Tr - MSFT
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • ORA-01658: unable to create INITIAL extent for segment in tablespace

    NEW REPOSITORY INSTALLATION ERROR!!
    I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
    After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
    After pressing the Install button in the RAU:
    -I take public synonyms
    -I scheck the box for "Support Designer Objects", then
    -The Repository size is Medium
    -I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
    After Starting, the Installation began an stop by installing some Tables like schown :
    Operation: Started : 07/03/04 20:26:32
    Reading File: cktabs.sql
    Object : TABLE CDDL_TMP_TBL
    Executing statement(s)...
    Verifying...
    .and so on till....uns so weiter bis
    Reading File: cktabs.sql
    Object : TABLE RM$INFO
    Executing statement(s)...
    Error Submitting Definition: User intervention required...
    RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
    ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
    Dumping Buffer...
    CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    ...End of Buffer
    User Requested: Stop Process
    When I read the Help of the Error the
    CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
    ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
    I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
    -pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
    -And the installato still stop with the same Error.
    Question: How schould I resolve this Configuration?
    You could respond in ENGLICH, GERMAN or FRENCH
    Thank you for your Help!

    You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
    Regards
    Sue

  • Unable to create an encrypted disk image in Lion

    disk utility gives the error Unable to create "Volume.dmg." (error - 60008) when creating an encrypted disk image. I am using the following steps:
        1.    Open disk utility
        2.    Select the disk (internal or external) to create the image on
        3.    Select File>New>Blank Disk Image…
        4.    Save As: 'Volume'
        5.    Name: Volume
        6.    Size: 50GB
        7.    Format: Mac OS Extended (Journaled)
        8.    Encryption: 128-bit AES encryption
        9.    Image Format: read/write disk image
        10.    Click the Create button
        11.    Password dialog appears
        12.    When I enter a password the dialog closes after entering only a few characters i.e. before I've finished typing, and the following error message displays:
    Unable to create "Volume.dmg." (error - 60008)
    I have previously, successfully, created encrypted disk images in Snow Leopard, and I don't know why I can't in Lion
    Does anyone have any ideas?

    Thanks for this Thomas.
    I've tried naming the image differently, but still received the error, I did however try different permutations for the password.
    The error seems to happen if I use a purely numerical password string and occurs on input of the 10th numerical character, if I start with numerical character but use an alpha before the 9th number I can continue and create a password, and I can create a password  if I start with an alpha and switch to numerals after the first alpha character, purely alphabetical passwords are fine too.
    It seems that Lion doesn't like purely numerical passwords greater than 9 characters, whereas Snow Leopard wasn't so fussy. Seems it's a bit of a bug.
    Thanks for your help

  • Unable to create an encrypted disk image with Disk Utility

    Hi:
    With our upgrade to Lion a few weeks ago, we're now unable to create an encrypted disk image of any type using Disk Utility any more. This problem occurs on 3 different machines, and is reproducible whether one is using an internal HD or an external FW HD. We can successfully create nonencrypted disk images.
    This is a duplicate post with all the details here: https://discussions.apple.com/message/18469359#18469359
    We haven't had any luck with a solution trying various permissions fixes as helpfully suggested by other readers in response to the error message # (-60008 error), so I'm hoping that someone else has run across a solution from the encrypted disk image perspective and that this tag line will generate some help.
    Thank you!

    Save As: 01 (on Desktop)
    Name: 01
    Size: 100 MB
    Format: Mac OS Encrypted (Journaled)
    Encryption: 256-bit AES
    Partitions: Single partition- Apple Partition Map
    Image Format: read/write disk image
    At the password window that pops up I enter: 1234567890
    This says password strength is "Weak"
    All works fine
    Then I repeated this using:
    Save As: 02 (on Desktop)
    Name: 02
    Size: 100 MB
    Format: Mac OS Encypted (Journaled)
    Encryption: 256-bit AES
    Partitions: Single partition- Apple Partition Map
    Image Format: read/write disk image
    At the password window that pops up I enter: 1234567890 and when I start to enter the next "1" I get the "Unable to create "02.dmg." (error -60008)
    OS 10.7.4
    Disk Utility Version 12.1.1 (353)

Maybe you are looking for