Unable to Create or Extend customers for some of the co_cds

Hi Folks,
We are creating customers for some of the company codes to client org. it has number of company codes. we are able to extend customers Except Italy, Iraq and Nigeria Co_cds. The reason given is that field KNB1_QLAND is not on screen SAPMF02D 0610. This field is for With Holding Tax. Recently we have upgraded to ECC 6.0 version from R/3 4.7. what is cause to not creating customers for some regions.
Please give some needful suggestions.
Thanks
Vinay.

Hi Vinay,
It looks like that in the customization "Assign withholding tax type to company code" in SPRO, subject to w/tx is selected in customer master data section. So, system is expecting the relevant informtaion. Check in Customer account group field status (T. code OBD2), the Withholding tax country field might have been set as suppressed. Check it and correct the same.
BR
Amitash

Similar Messages

BEA-002606 Unable to create a server socket for listening on channel

Hi,
I am trying to stand up JDEVELOPER suite 11.1.2 on Windows 7 64 Bit.
When I sreate a sample app and try to compile, I get the error:
<Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.56.101 might be incorrect or another process is using port 7102: java.net.BindException: Cannot assign requested address: JVM_Bind.>
This IP is not active on my machine, although it was initialized at one point through a VBox instance I installed. I have tried to clean off the VBOX instance and the JDEVELOPER, rebooting between loads. Can anyone help me get what look like a ghost IP off my machine. Note: I set the weblogic server to port 8003, so I am also not sure why itis looking at port 7002.
Thanks
JT

It is the integrated server. I have taken everything off (JDev adn VBOX) and cleaned some of the hard to find file structures just to make sure there wasn't a hidden config file I was missing.
I am new to Web Logic, so I was hoping to get the integrated server running first and then learn the ins and outs of deployment to a production system.

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

For some reason the Apple ID window in iTunes and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Unable to update softward--get message that I do not have sufficient privileges for some of the items

unable to update; message appears "operation can't be completed because you do not have sufficient privileges for some of the items"
using Mac OS 10.4.11
== attempted to update firefox from 3.0.9 to 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/533.16 (KHTML, like Gecko) Version/4.1 Safari/533.16

Try to repair the disk permissions:
* http://thexlab.com/faqs/repairprocess.html

Unable to create SASL client connection for authentication mechanism [PLAIN

I have problem to use dscc to admin my ds/dps servers, since I the dscc can't contact dscc agent. Though the agent is running on the default port number with network-bind-port of 0.0.0.0, there is nothing I can do to fix it.
I debug the problem, and found following errors in server.log under dscc (deployed on SUN AS 8.2):
Message: Unable to create SASL client connection for authentication mechanism [PLAIN]|#]
[#|2007-08-21T15:28:40.252-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.SASLClientHandler.initialize(SASLClientHandler.java:124)|#]
[#|2007-08-21T15:28:40.253-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:131)|#]
[#|2007-08-21T15:28:40.254-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)|#]
[#|2007-08-21T15:28:40.256-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)|#]
[#|2007-08-21T15:28:40.257-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)|#]
[#|2007-08-21T15:28:40.258-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)|#]
[#|2007-08-21T15:28:40.260-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getJmxConnector(NquickClient.java:816)|#]
[#|2007-08-21T15:28:40.261-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnector(NquickClient.java:519)|#]
[#|2007-08-21T15:28:40.262-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.nquickclient.NquickClient.getConnectorSystemAuthentication(NquickClient.java:314)|#]
[#|2007-08-21T15:28:40.263-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool.getSyncServerMBean(NquickPool.java:435)|#]
[#|2007-08-21T15:28:40.264-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | com.sun.directory.dcc.core.NquickPool$1.run(NquickPool.java:320)|#]
[#|2007-08-21T15:28:40.271-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.admin.directory.dcc.util.ViewBeanUtils:appendDebugLine | java.lang.Thread.run(Thread.java:534)|#]
[#|2007-08-21T15:28:40.289-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageTitleAlertAndText | Node has no attributes.|#]
[#|2007-08-21T15:28:40.293-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageActions | Could not obtain pageactions element.|#]
[#|2007-08-21T15:28:40.295-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=11;|
15:28:40 | httpWorkerThread-8080-0 | com.sun.web.ui.taglib.pagetitle.CCPageTitleTag:appendPageViewsMenu | Could not obtain pageviews element.|#]
Please help if you could figure out what's going on. Thanks!

Bug ID: 6551672
Synopsis: SunAS claims "Unable to create SASL client conn for auth mechanism" and do not talk to Cacao
Work Around:
Work arround:
Change the JVM of used by App Server.
Edit the file:
     /usr/appserver/config/asenv.conf
and replace
     AS_JAVA="/usr/j2se"
by
     AS_JAVA="/usr/java"
Then restart your AS domain.

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

VL10G is not creating delivery for some of the confirmed scheduled lines

Hi, I was trying to find the reason why we are getting a very generic error message (Message type V50R ID 036 - The document could not be delivered.) for some of the confirmed schedule lines when executing VL10G in batch and no delivery document is created. Those orders have confirmed scheduled lines and inventory has confirmed to have stock. However, when the VL10G is executed in background, the sales order line items will be captured into the list but when creating delivery, the systems is showing the above error message.
From debug, found out the message is generated from LV50R_VIEW43.
We went through lots of OSS notes but nothing seem to ring a bell here. We are using ECC6, list type = index list.
The error message is very inconsistent. The same documents will be dropped for delivery after several days without any change to any of the sales document or inventory level.
Some of the note mentioned the parallel processing lock on ATP check for the material may be the reason for the error however we are not using any parallel processing in VL10G. We also checked the index table VEPVG has all correct entries and all the entries are being selected into the delivery due list. Error happens when the delivery is trying to be created.
Any advice is appreciated.
Thanks.

Hi ALL,
Any suggessiton on the below issue.
We have batch jobs to process the DDL for the STOs, but some of the line items of the same STO is not picked up by batch job, (VL10B is assigned in the batch job, i checked the variant and configuration, everything seems to be fine, when i try to process the DDL through VL10B manually by giving the STO number only, the VL10B program is not picking the STO, but the same STO can be processed through VL10D, what could be the problem and why the VL10B program is not recogonizing the STO for the delivery creation.
We are using ECC 6.0
Regards,
Rajesh.R

HT4436 I m unable to create an apple id for iCloud as its showing that the limit for creating a free id has been exceeded

I m unable to create an apple id for iCloud as its showing that the limit for creating a free id is no longer available on your device

Yes. On the other iPhone go to Settings>iCloud, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud. Any data being synced with iCloud on this phone will be deleted from it when you delete the account, but will sync back with you sign back in later.
After deleting the account, set up a new one with a different Apple ID. Then delete this account from the phone and sign back into the original account to sync the iCloud data back to this phone. You can then go to the other phone (the one that doesn't have any remaining accounts on it) and sign into the new account you just created on your other phone using the ID you used to create it.

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

Changing date format for some of the date columns in a subject area

Hi,
I have a requirement to change the date format for some of the date columns to dd-mon-yyy for only a particular subject area. Is there a feature available in the RPD which can help me do this?
In Answers - Column Properties for a Particular column of a report, we can save the style and formatting as system wide default for the particular column or the data type, but that applies across subject areas.
I tried with the config files too , but that too applies to all suject areas.
Thanks in Advance,
Gaurav

Why don't you create 2 logical column derived from same date physical col and then change the format for one logical column and use it in Subject Area ?

ERM -- unable to determine matching org. level for BRGRU in the system

Hello,
I have a problem.
When I trY to import in the ERM (SAP GRC AC 5.3 SP5) a mass import of roles (derived roles) using the template Organizational Template.
Some of the roles gives me this error:
"Role not imported; unable to determine matching org. level for BRGRU in the system".
In the file I put for example
ZAPVAPINTE BUKRS 0083
Am I doing it right? or do I have to put $BURKS?
Best regards.
Pablo Mortera.

I have found that when you run the background job "syncronization of the organizational values" it pulls the org value name and all "values" assigned to it. If you don't have values specified (on the table level) for the org name, you get this error. We have many fields that we use values for these fields but they aren't specified in the table.
For example: We have the org value "PLVAR" with the values "AL", "01", "02", "03", and "GB" assigned to it. You can actually see these values in the backend system using SE11. We do not get this error on this org value. However, we have another org value "SACHZ" that we use, but we do not have any values assigned to it on the table level, so it is giving us this error. We are trying to find out how to populate the "values" field since this was not done through configuration.
Here are the steps: (1) Go to SE11 in your backend system. (2) Put your org value (example: PLVAR) in the "DATA TYPE" field and click display. (3) Double click on the Domain name. (4) Go to the Value Range Tab and click on the "Value Table" name if there is one. This is the table that has the org values assigned in it - normally done through configuration. (5) go to Utilities --> table contents --> display. (6) execute the table contents. These are the values that the sync job pulls over. If there are no values there or if there is no "values table" name, you get the error. If there are values there, you don't get it.
We are working with our technical team to get the values in these fields to see if that works. Another quick way to see if there are values assigned to the org field is to use "Org Value Mapping" in ERM. Select the "derived org level field" you want to see and click on the "org value from" magnifying glass. If no values are there, a "values table" hasn't been populated in SE11.
It doesn't make much sense to me though because we can still use values for these fields for our derived roles....we just don't populate the table with them.
I'll update this message if we find a solution.
Thanks,
Peggy

"do not have sufficient privileges for some of the items."

My computer at work is on a network with pcs and one other mac. Recently I had issues with illustrator crashing when I tried to open a file, Apple and Adobe were unable to solve the problem after working on it for 3 days with them on the phone. I decided to try Archive and reinstall. That fixed the Illustrator problem, but now I have a new problem. I can no longer move files from my computer onto the network. I CAN move files FROM the network onto my computer, OPEN the files on the network and edit them and save them under the same name. But if I try to save a new file to the network it tells me:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
I used to be able to move everything I wanted into any folder I wanted, but now I'm limited. I can move files to the other iMac's desktop no problem, but moving files to the network isn't working.
I asked the network tech and he said that everyone should have full privileges because there aren't privileges to be set. I've asked him to reset my account on the network but he said that wouldn't make a difference.
No the files aren't locked, no the network folders are not locked/restricted or anything. I'm stumped!
The only other option I can think of is to completely delete and reinstall my OS :I

HI,
If you haven't done so, try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you

I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you

You need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them. But a lot of USB memory sticks need more power than is supplied to the kit, so you may need a powered hub between it and kit.

I have just upgrade my Ipad3 to IO6 and for some reason the youtube app just gone disappeared. Please help

I have just upgrade my Ipad3 to IO6 and for some reason the youtube app just gone disappeared. Please help!!

The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

Unable to Create or Extend customers for some of the co_cds

Similar Messages

Maybe you are looking for