Unable to create partition for solaris 10

I have windows 7 installed in my vaio, and want to install solaris 10. I have 190 gb of space. Which I divided as
1. 40 gb for windows
2. 65 gb
3. 65 gb
4. 20 gb unallocated
I want to install Solaris in unallocated space. when I try to install solaris 10. It shows only two partition 40 gb and 150 gb. I am new to Solaris.. please help.

hello, you don't have to use hme0, that may not be your NIC type. your NIC appears to be realtek adapter. download the drivers first [try here: http://homepage2.nifty.com/mrym3/taiyodo/rf-1.0.9.tar.gz] install them, then your NIC will have a name like rt0. you can then proceed to set its interface.i hope ifconfig -a, blah,blah is ok with u. If the adapter is ok then you can now do the zones - they are just automatic no strugling!
you can also find the drivers from realtek website at -- ftp://152.104.238.194/cn/nic/rtl8139abcd8130810xseries/rtls211.zip
here are sample instructions on how to install the driver
How to install Solaris/x86 version
1. This is the version 2.1.1 RTL8139 serials driver for Solaris/x86
version.
2. It support Speed/Duplex-Force mode, you can set it through rtls.conf file.
3. It supports 3 PCI-VID_DID cards, VID_10EC_DID_8139 for Realtek's
native, VID_1113_DID_1211 for Accton and VID_1186_DID_1301 for
D-Link in the install script.
4. Install method:
a. Power-off your PC and insert your RTL8139 adapter.
b. Boot-up you Solaris/x86 and login as "root".
c. Copy the "rtls211.zip" into the temporary location in your
hard-driver.
d. UNZIP the "rtls211.zip" and you will get 3 files, "rtls", "rtls.conf" and
"Install".
e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139
or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the
"Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example,
modify the "pci1186,1301" to "pciABCD,WXYZ".
f. Run the "Install" from File Manager to install the driver, and
it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
g. You need to create the "/etc/hostname.rtls0" file and modify some
other related files to make your networking environments working well.
h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that
Solaris will reboot and scan changed hardware environment.
i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.
success. bye

Similar Messages

2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

Deployed four 2960X switches in a stack. All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page. I assumed this was a browser error. So tried Chrome then IE which both failed. Chrome was a bad display and IE fails to connect.
After this, I could not telnet or ssh. Plugged into the console and immediately started receiving:
%AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
%% Low on memory; try again later
I am unable to log in. I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window. When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command. I don't mind disabling HTTP.
Any suggestions?

I am currently working with TAC
The switches failed about 18 hours later and had to be rebooted to get back up. Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
SW13#sho proc mem sort | i Auth Manager
191   0 177721332   95004616   34757416          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177754888   95025696   34759780          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177774316   95037928   34761056          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177799720   95053940   34762888          0          0 Auth Manager
SW13#sho proc mem sort | i Auth Manager
191   0 177824976   95069732   34764696          0          0 Auth Manager
SW13#
SW13#
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103448576 Free: 339348260
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103454416 Free: 339342420
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103455860 Free: 339340976
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103459236 Free: 339337600
SW13#sho proc mem sort | i Processor
Processor Pool Total: 442796836 Used: 103461040 Free: 339335796

Cannot export video clips. Get message: "unable to create video for export"

Cannot export video clips from iPhoto to Finder folder. Export fails with message "unable to create video for export: "
The video clips play correctly within iPhoto.
Software: iPhoto version 9.5 on OSX 10.9
Hardware: Retina Macbook Pro 2.3 i7 8GB

Yes. I have 3,184 video clips in this library. I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly. I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case.
Some more info that may be relevant:
I have multiple iPhoto libraries. My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
The problem reported here is occuring on that "main" library. I have not opened any other iPhoto library since installing the new release.
While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive. It appears that meta data is copying correctly along with the video content.
I am able to import these copied video clips to iMovie. Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
In summary, the File>Export function still fails with the message "unable to create video for export." Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie. I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function.

Genesys CTI Driver-Unable to create Driver for GplusVoice

I have a 8.0.0.4 and Genesys 7.5 integration. We are receiving the following error messages in our CommSessionMgr and Scomm Logs when we attempt to make a connection from Siebel to the Genesys CTI Server. There are no firewall ports blocking any traffic between Siebel and Genesys and then are on the same subnet and VLAN. Also, we can establish a basic connection to the Genesys T-Server without Siebel in place. We think that it may be a configuration issue somewhere but we are not sure where to look. I was just wondering if anyone on this board had any basic ideas to troubleshoot this issue besides looking through the log files and the Comm Drivers and Profiles section etc.
Thanks for anyone’s help on this matter!!!
CommSessionMgrLog:
ServerLog LstnObjPrivCreate 3 0004fd49499b1400:0 2009-02-19 10:31:31 Created port 49192 for Communications Session Manager
ObjMgrLog Error 1 00000b92499c1228:0 2009-02-19 11:10:38 (mediamgr.cpp (497)) SBL-CSR-00500: Unable to create a Driver
SCommLog:
SComm[02/20/2009 09:36:45:615]:ERROR:Error on invoke media manager method(StartAllDriver), input args={
DriverProfileInfoArray = 2#2385#9#5#Voice5#Voice11#Gplus voice7#1-5I5JR15#VATaxCallCenter14#GenCommDrv.dll11#GenComm.GIF2289#2#1722#66#26#Service:UsePendingWorkmode22#Service:OCSCancelScope27#Service:KwPiProtocolVersion17#Driver:ServerPort20#Driver:RemoteTimeout18#Driver:LibraryNa .... (message is too long) ...
LanguageCode = ENU
}, error=7537140), msg='Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500)'
SComm[02/20/2009 09:36:45:615]:ERROR:Failed to invoke method(StartAllDriver) at media manager, detail error = Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500)
RSCHELLE_25165941[02/20/2009 09:36:45:615]:ERROR:Communication Agent failed on prcoessing request(StartAllDriver0, input-args={
DriverProfileInfoArray = 2#2385#9#5#Voice5#Voice11#Gplus voice7#1-5I5JR15#VATaxCallCenter14#GenCommDrv.dll11#GenComm.GIF2289#2#1722#66#26#Service:UsePendingWorkmode22#Service:OCSCancelScope27#Service:KwPiProtocolVersion17#Driver:ServerPort20#Driver:RemoteTimeout18#Driver:LibraryNa .... (message is too long) ...
LanguageCode = ENU
}, errcode(7537140), errmsg(Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500))
RSCHELLE_25165941[02/20/2009 09:36:45:615]:ERROR:Failed on invoking ClientConnect in Comm. Server Svc., err=7537140, msg=Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500), input= ClientHost = NG00060492
ClientIP = 10.172.20.128
Simulate = 0
SiebelMobileClient = 0

Figured it out on my own

Unable to create partition while installing windows 7 on MacBook Pro

Have new MacBook Pro (bought 5/30/14) has 16GB ram and 500GB HD. Trying to install new copy of Windows7 Home Premium. Have USB drive for Windows drivers. Get through Boot Camp OK and when windows installation begins and selecting BootCamp partition the screen says unable to find partition. HELP!
MacBook is running OS X 10.9.3 (13D65)

find the boot camp instructions, at that point where you are stuck, you are supposed to manually click the bootcamp labeled partition and reformat it via the advanced/format button below then it will continue
unrelated, is your usb device usb2 only? if not, you might have an issue where your kb/trackpad do not work once windows is installed. do you have a usb kb and mouse you can use?

Strange error when Bootcamp attempts to create partition for Windows

I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
*The disk cannot be partitioned because some files cannot be moved.*
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

Hi,
this gets asked at least a thousand times by now.
Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
Regards
Stefan

Unable to create account for SAPserviceEC6

Hi,
I have the above problem when trying to install 6.0.
We reformat the server clean few times and still have the same error message.
happened in step 3: Create user for SAP system,
Log:
INFO 2009-08-08 22:45:47.991
Nothing to do. User privileges are an empty string.
INFO[E] 2009-08-08 22:45:52.593
FSL-01027 Account user="PHOENIX\SAPServiceEC6" does not exist.
WARNING 2009-08-08 22:45:57.179
Unable to get the name of a domain controller for domain .
ERROR 2009-08-08 22:46:10.923
FSL-01002 Unable to create account PHOENIX\SAPServiceEC6. HRESULT=0x80005009
ERROR 2009-08-08 22:46:10.923
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-08-08 22:46:10.923
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
aditional info: We use the same installer , windows server 2008 64bit.
Why?
Regards,
Andy
Edited by: Andy Quipit Sayus on Aug 9, 2009 6:18 AM

Hi all,
Today I faced the similar problem and I found that it is due to I had joined in domain for my server so that the installation could not create users.
I changed the domain to local( example : WORKGROUP) and the installation could continue. After that you can join your server to domain again
To whom it may be concern

Unable to create socket for ExamplesServer

I followed the manual on how to run the sample jsp programs with Weblogic. The manual says that the Weblogic server should be started first and the succeeding steps, somehow repeats that we should start the examplesServer as well. So did that even if the default app server is already running which is using port 7001 already. So as I expected, I got this error when running the examplesServer:
<Aug 8, 2002 6:32:39 AM MDT> <Emergency> <WebLogicServer> <Unable to create a se
rver socket for port: 7001. java.net.BindException: Address in use: JVM_Bind Per
haps another process is using port 7001.>
Please advise on how to properly run the sample server. Please note that with just the default server running, when I enter the url for the examplesServer on my IE browser, I get this error:
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

Are you sure that there is a server process listening on that port number? I think you will get a "Connection refused" message if there is no sever listening on the port you are trying to open. Have a look at ServerSocket

Help? Trying to create partition for Windows...

Okay so I'm trying to create a partition for Windows XP and I go to the Boot Camp Assistant and I have it set to 32 GB and I click partition and it says that I have to "repair the disk." So I go to the Disk Utitlity and I tried verifying my Mac HD and it couldn't even verify. Here's the description:
Verifying volume "Macintosh HD"
Performing live verification
Checking Journaled HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Incorrect number of thread records
Incorrect number of thread records
Checking multi-linked files
Checking Catalog hierarchy
Checking Extended Attributes file
Checking volume bitmap
Checking volume information
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed
Someone please tell me what does this all mean and tell me how to make the error go away

Hello akl88066
To repair the Macintosh volume, you will need to boot and make the repairs from the install disk as described in the link below!
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8492.html
Dennis

Cant create partition for bootcamp

I open up Boot Camp Assistant, select Install Windows 7 then i divide my windows partition to 350 GB and click Install with the Windows 7 disk inserted... but it still says wait for the disk to be recognised and doesnt go through...
If i remember correctly, on Snow Leopard it was first creating the partition and then it was working perfectly...
Any clues?

Are you referring to the Windows disc Boot Camp isn't recognising? Perhaps try putting the disc back in the disc drive and then try opening Boot Camp Assistant and continue with the installation of Windows through the Boot Camp Assistant. In order to install Windows, the Boot Camp Assistant would ask you how much space you wish to allocate to the Windows install (for you to use once Windows is fully installed). If you set "divide equally" it would shrink the existing Mac OS X partition of the hard drive and create a new partition on the extra space that would then be available to use, which it would create a Windows-compatible partition for Windows to use. So 2 partitions would be on the hard drive now. So when you launch Boot Camp again, you can go to the "Install Windows 7" option straight away, as I'm presuming Boot Camp already created the separate Windows-compatible partition on the hard drive.

Unable to create extension for latest Adobe Flash 14.2

Hi. I tried to create own extension for my needs for latest Adobe Flash CC 14.2 with extension builder 3, but after exporting test extension I got error, that max installed version is 14.0
I'm a bit confused how can I create extension for latest Adobe Flash CC?

Solved by manually changing supported versions in manifest file
<Host Name="FLPR" Version="[13.1,14.0]" />

Unable to create folders for apps on springboard

I was successful at creating folders for one of my sons on his Ipod Touch, but my other son's Ipod won't allow me to do it. Is there a setting that needs to be turned on or off or what? With my sucessful situation, I simply held my finger on one of the apps on the springboard until they all got wiggly, and, therefore, moveable. I drag one app on top of another and was able to create a folder for the 2 (i.e., zombie games). I did the same thing on my other son's Ipod and the apps would not go on top of each other, would simply replace each other in the order they were on the springboard. I hope someone can help...

Do both iPods have iOS 4 installed?

Unable to create delivery for STO between different stroage locations

Hi,
i created PO for STO between differen storage locations belonging to the same plant.
At the time creating PO iam getting warning message " Of material RM-999999, only 0 KG are available on desired
date". what could be the reason?
when iam doing vl10b, PO is displaying but when iam selecting the PO line and clicking on the background button it is not generating any delivery document number and it is not showing any errors?
can any one help on this.

Hi Praveen,
While executing VL10B, you are actually planning to create outbound delivery for STO PO.
The STO PO will be due for delivery on that date and hence PO is displayed in the transaction.
The error message specified by you means on the due date of delivery, there is no material quantity exists at supplying storage location. This could be because no quantity exists in storage location or there could be some reservations available for available quantity or some other quantity is booked under some other outbound delivery document on or before that date.
Check for stock on posting date via t-code MB5B and proceed accordingly.
Hope this resolves your problem.
-Ravi

Unable to Create Partitioned Table

Hi All,
I was trying to create a partitioned table using following
Create table customers (custcode number(5),
Name varchar2(20),
Addr varchar2(10),
City varchar2(20),
Bal number(10,2))
Partition by list (city),
Partition north_India values (‘DELHI’,’CHANDIGARH’),
Partition east_India values (‘KOLKOTA’,’PATNA’),
Partition south_India values (‘HYDERABAD’,’BANGALORE’,’CHENNAI’),
Partition west India values (‘BOMBAY’,’GOA’);
It is throwing me an error
ORA-00922: missing or invalid option
Will you please tell me what is wrong with this query? Is it possible to create partitioned table using select statement (create table as select... Partition by...)?
Regards
~Pravin

Pravin
Will you please tell me what is wrong with this query?I see 4 errors in the syntax. Therefore, I strongly suggest you to have a lock to this:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2146309
In addition, have a look to the error message. If I run your script in SQL*Plus it clearly shows where the problem is. E.g.:
SQL> Create table customers (custcode number(5),
2 Name varchar2(20),
3 Addr varchar2(10),
4 City varchar2(20),
5 Bal number(10,2))
6 Partition by list (city),
7 Partition north_India values (‘DELHI’,’CHANDIGARH’),
8 Partition east_India values (‘KOLKOTA’,’PATNA’),
9 Partition south_India values (‘HYDERABAD’,’BANGALORE’,’CHENNAI’),
10 Partition west India values (‘BOMBAY’,’GOA’);
Partition by list (city),
ERROR at line 6:
ORA-00922: missing or invalid option
Is it possible to create partitioned table using select statement?Yes. With the usual syntax.
HTH
Chris Antognini
Author of Troubleshooting Oracle Performance, Apress 2008 (http://top.antognini.ch)

Unable to create releases for Blanket PO in iProcurement -Urgent

Hi All,
Please clarify if we can create releases for a Blanket PO in iProcurement. If it is possible, one my customer has created a Blanket PO and it is with approved status, but not able to find the Blanket PO in iProcurement search window for creating the releases.
If it is not possible to create releases from iProcurement, please suggest the procedure to create the releases. And also please let me know when can we query the blanket PO to find in iProcurement?
Please share some important links on iProcurement if any.
Regards
Ram

Is your Blanket Agreement approved and its terms dates current? If the BPA has expired or future dated, it will not show up in the item details on the search in iProcurement. It is very much possible to generate not only releases, but also carry them all the way to their approval. You need to define a BPA. Then create an Approved Supplier List, Sourcing Rules and Assign them to the default assignment set.
Subsequently when the user selects an item referencing that BPA in the iProcurment and creates a requisition, the release will automatically get generated if you define the Release Method on the ASL to 'Automatic Release'. The only condition is that the Buyer on the BPA needs to have sufficient approval authority to approve the release generate out of the requisition.
Hope this helps.
Kind Regards

Unable to create partition for solaris 10

Similar Messages

Maybe you are looking for