Unable to create PDF from Publisher file

I am able to create .pdf from a .jpg, also from an .xls ... but not from a Publisher document (2007).
I get a prompt to run in repair mode and I tried that (twice) but the problem is not being corrected. At one point I had a message about PDFMOUTLOOK and thought I disabled it. I tried both ways, from inside Publisher, and dire Any help will be greatly appreciated.ctly from Adobe Acrobat 9 Pro ... neither works.
Below is the log:
%%[ ProductName: Distiller ]%%
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
-169
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
LinK

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Similar Messages

Unable to create PDF from dwg Files

Hi All,
I suspect this question is old hat but if anybody can provide a solution it would be greatly appreciated. Acrobat 8.3.0 professional edition Windows XP sp3.
It used to work a long time ago but when I try to convert a dwg to PDF the message "An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF". I looked at the "create PDF" options in preferences and only security options are shown for Autocad files so I know something is amiss.
I have tried adding a printer using the ini file in the xtras folder in Acrobat and when I look at printing preferences (before and then after the install) all the boxes are blank - again an indication something is wrong?
I have tried the repair function in the control panel - still no good.
Any (polite) suggestions other than buying X?
Many thanks

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Creating PDF from Publisher files - failure

my first attempt at converting a publisher file to PDF format failed - no reason given. Too much security on my computer? How can I resolve this probem?

Hi dvane932,
Are you using the Adobe PDF Pack to convert the file to PDF? How large is the file? There is a 100 MB file-size limit for uploading files to the online service. That said, please try the following:
Clear the browser cache and try again.
Make sure that you're using a supported web browser: System requirements | Acrobat.com
Make sure there are no firewall/proxy settings that are limiting your access to the Internet.
Try converting a different file to PDF (helps narrow down the problem).
Please let us know how it goes.
Best,
Sara

Creating PDF from Office files in Acrobat X for Mac

Dear All - I just installed the Mac version of Acrobat X (with the newest dot release upgrade). I was surprised to find (on my installation anyway) that the only way to create a PDF from an Office document is from within Mac Office, using the print command to create an Adobe PDF.
There is no way to use Create PDF from the initial screen or the menu bar of Mac Acrobat X to convert an existing .doc, .docx, .xls, .ppt, etc. file - the dropdown list of supported formats doesn't include any of the Office formats. Nor does dragging an Office file's icon onto Acrobat's icon work.
I know from the video tutorials on adobe.com that the Windows version of the Acrobat X product does support direct conversion of Office files without having to open them first in Office. Is there something screwy with my particular installation, or is the exclusion of Office conversion in the Acrobat application (as opposed to through Office) a "feature" of the Mac version for some reason?
Many thanks.
Bob

That's a good question, but I don't have a definitive answer. I know that Adobe has claimed to be working on providing PDFMaker capabilities (at least partially) for the Mac, but we haven't seen anything yet. PDFMaker was dropped as of version 9, but even before then, it was considerably less capable than the Windows version.
I believe there are techincal limitations on the Mac that prevent them from integrating it with Microsoft Office products. I know that on WIndows, Office needs to be installed for PDFMaker to work, so Acrobat (PDFMaker) relies in part on MS Office functionality. If the same APIs aren't available on the Mac, there's not a lot they can do apart from implementing a conversion process that does not rely on MS Office, which sounds to me like a considerable undertaking.

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Creating PDF from multiple files results in file name AND chapter name both appearing in TOC.

And all the bookmarks in that chapter nest directly under the file name. I would rather have just the chapter title appear with no file name in the TOC and the chapter bookmarks nested under that.

Hi tekwrite1955,
This is an expected behavior. When you create a pdf from any file it will list the filename in the TOC.
You have to manually edit the bookmarks.
Regards,
Rave

Create PDF from Multiple Files Error

Running Acrobat 8.1.2 and InDesign CS3 8.0.2
When trying to create a PDF from multiple files, I am getting an error with each file as it is opened by Acrobat to create the PDF file. The error reads:
Invalid value for parameter 'using' of event 'exportFile'. Expected PDFExportPreset, but received "Standard".
The files are also left open in InDesign afterward instead of being closed. Does anyone have any idea what might be causing this?
Thanks.

Did you upgrade your Office / Word installation?
PDFMaker-compatible applications for Acrobat 7 with regards to MS Office:
--| Office 2000
--| Office XP
--| Office 2003
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Problem creating pdf from multiple files

Hello,
I'm running Windows XP SP3 with Adobe Acrobat Standard 8.2.1. When I try to create a one pdf from multiple files in Adobe Standard 8.2.1 the application just closes. The two files I'm trying to combine into 1 pdf file are word files. I'm able to create a single pdf of each word file by opening them separately in word and sending them to the acrobat printer. I've tried combining other files also, but had no luck. Windows events doesn't log anything under applications and no error message pops up when the application closes.
Anybody have any ideas how to troubleshoot this issue or what could be causing the applicaton to just close?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

How to create PDF from text file with specific layout?

I wanted to create the pdf from text file in specific layout - Landscape orientation and JIS B3 Page size while at Adobe Acrobat Pro.
In past, I could do a right click on a text file (desktop area) and select print to print out the document into .pdf BUT only if I set the Adobe PDF to Landscape and JIS B3 Page size BEFORE. And I could only do 15 text documents at once.
I wanted to see if I could do the create the pdf from text file with specific layout in Adobe Acrobat without having to go to Control Panel to preset the Adobe PDF to specific layout at every time. I would have to set Adobe PDF back to normal layout after I'm done with these pdf print outs. I do lots of pdfs in normal layout. Sometimes I would forget to do that.
So, How do I do that?

No such luck. It would output the contents in letter size even in JIS B3 Page layout at MS word.
Is there a script or action where I could set the orientation and page size before creating PDF on these text files?

Unable to create PDF from scanner

My office uses a Canon iR-Advance C5035. I previously had a computer that was running an older version of Windows (XP, I think) and Adobe Acrobat Standard (6, maybe), and I was able to create PDFs with the scan function on the Canon.
This year we bought a new computer that is running Windows 8. I just purchased and installed Acrobat Standard XI, but I am unable to create PDFs using the Canon scanner. I keep getting a "Either scanner driver is not installed or scanner is not connected." error. When I look at the "Custom scan" option, the Canon doesn't even seem to be detected. I'm not sure how to address this problem and any help would be much appreciated. Thank you!
-Paul

Look under Control Panel>System>Hardware to see if the scanner appears. If not, then try Add Hardware (or whatever the option is in Win8) to install the driver (if available from Win8). If the cannon is on a network, you may have to go to additional steps to install it since the OS may not see it. The idea of looking for a new driver is also a good idea since Win8 (just like happened with Win7) is not shipped with a lot of the drivers.

How to create PDF from Publisher A3 landscape file

I have a poster in an A3 landscape Publisher file, two pages. When I created a PDF it came out as portrait, and only the left half of each page. What can I do? I need to take it to be printed, as I don't have an A3 printer, and the office shop wants it as a PDF.
Sue Slater

Not sure where that leaves the bUseConv parameter...
bUseConv
(optional, Acrobat 7.0) A Boolean value that is used when cPath references a non-PDF file. If true, the method tries to convert the non-PDF file to a PDF document. The default is false.
Do you mean that, despite being documented, it isn't supported?

Create PDF from two files in sub folder automation

I am looking to create an automation tool that does the following to help save time (the current process takes about 20 min):
First, take two specific files (The first page is a single worksheet excel file that is fitted to one page. The second is a word document.) in a user defined location and combine them into one document. Currently this is done manually through Acrobat 8 via the Create PDF function for each file then the Combine PDF function.
Second, I would like to have the Bookmark and Attachment pane set for initial view, but there is not a preset option for this. Is this even possible? Currently, I set the initial view to bookmarks and page, and include a not one the first page on how to open the attachment pane.
Third, all external links to documents, via hyperlinks, are added as attachements and the links are changed to point to the attachment so that all information is contained within one document.
Lastly, this newly created document is posted to an intranet location.
Any help in part or whole would be great.
NOTE: All code must be included as an add-in to Acrobat as this is within a corporate environment and server side scripts are not allowed.

I have created the following script as a start to trying to figure this out, but I am getting unexpected results. When I run this script, I get the two files, Temp and Combined. The Temp file is, as expected, a pdf version of the last file in the array, but the Combined file is where the problem is. With the Combined file, I have one blank page, then my single worksheet from the workbook, and then only the first page of the word document which is 26 pages. Any idea what I am doing wrong?
In addition, is there a way to prompt the user to select the filepath through a Windows Explorer interface?
Current code:
var filepath = "/c/filepath/"
// Create a new PDF document for Profile:
doc = app.newDoc();
doc.saveAs({ cPath: filepath + "Temp.pdf" });
doc.closeDoc(true);
doc = app.openDoc({cPath: filepath + "Temp.pdf" })
// List of files of different extensions
aFiles = new Array( "Doc1.xls", "Doc1.doc");
for ( var i=0; i < aFiles.length; i++) {
// Open and convert the document
newDoc = app.openDoc({
oDoc: doc,
cPath: aFiles[i],
bUseConv: true
// Save the new PDF file to a temp folder
newDoc.saveAs({ cPath: filepath + "Combined.pdf" });
// Close it without notice
newDoc.closeDoc(true);
// Now insert that PDF file just saved to the end of the first document
doc.insertPages ({
nPage: doc.numPages-1,
cPath: filepath + "Combined.pdf",
nStart: 0

Align Columns? using Acrobat Pro 9 to create pdf from text file(s)

Hello,
Every time that I have tried to create a PDF from a text file, the columns dont align. The default Notepad setting I use to view a text file is Courier New which shows the columns aligned. How can I set defaults in Acrobat Pro 9 to have columns align?
Thanks

By definition a plain text file has no font, so it cannot be monospaced. Acrobat converts plain text using Times, this cannot be changed.
As TSN suggests to create a PDF from a text file with a specific choice of font and formatting you must print from another application.

Create PDF from text file.

The CreatePDF app description states "Convert all your Office, Photoshop, ..., Text, and RTF files to PDF using 'Open In' to send the files to the CreatePDF application" (bolding mine). But I see no way in the iPhone Notes app to do an 'Open In'. Really?!? I can't even create a PDF from the standard Notes app?!?

Hello tomscheifler,
notes in the notes-app are NOTES not FILES.
Conclusion: You cannot convert them.
You have take a detour via e.g. "docs to go" and save the note as word doc.
Then adobe does the job you expect....
Regards

Can't creat PDF from .DWG file

Using the world's most popular CAD program. Can't create a PDF from Adobe 3D. Apparently Adobe 3D wants to open the file using my AutoCAD, but thinks AutoCAD is not on my computer???

Hi SWS,
Didn't find it here, but found the answer by Googling and getting pointed to an AECBytes article from Feb '06, which had updated Revit 3D Capture settings (settings more updated than what Adobe gives you!).
It's too bad the rotation tool is so unweildy and that the walkthru isn't right there with rotation, pan & zoom (crazy - no idea why that is). I need these to work in Reader for regular people, not computer/cad savvy types. Adobe 3D seems to have just great potential, but doesn't seem ready for prime-time yet on the PDF recipient end yet. Maybe version 8 is more polished/joe-regular-user friendly (which is what it's billed as if it's for use in Reader.
Thanks again for your help.

Unable to create PDF from Publisher file

Similar Messages

Maybe you are looking for