Unable to create R3 site

Hi,
I am getting "XXXXX: no valid R3 back end system" error message while creating R3 site for initial load even if RFC connection and logical system are persist, clicked on set attributes button, entered RFC connection and click on Get Values then this message is getting displayed.
Could you please help me on this.
How the logical system is interlinked to RFC connection? can we create RFC connection with logical system?
Thanks and Regards,
Venkat

Hi
If ur trying to establish connection between CRM and ECC.
1)Try to maintain RFC destination and logical systems name same .
For example
CRM
RFC destination         : EC6CLNT200
Logical system name : C18CLNT200
ECC
RFC destination         : CRMCLNT200
Logical system name : EC6CLNT200
Regards
V.Srinivas
Edited by: vallabhaneni srinivas on Feb 19, 2009 11:24 AM
Edited by: vallabhaneni srinivas on Feb 19, 2009 11:25 AM

Similar Messages

Non site collection admins unable to create publishing sites

I've come across a problem which a number of other people have found and blogged about a 'fix', this is where non site collection administrators are unable to create sub sites with the publishing site templates (both with and without workflow version).
The 'fix' for this is to grant 'Restricted Read' permission to everyone on the Masterpage and DeviceChannels folders.
Does anyone know if this has been fixed properly, i.e. by Microsoft in one of the updates? I'm still going through them one by one but haven't yet found one that sorts it out.
Thanks.

Hi Simon,
I tested the same scenario per your post in my environment, and I cannot create the publishing site when I had no permission on the Device Channels list.
It seems that we need to have at least Read permission on the Device Channels list (no permission is needed on the Master Pages Gallery ), then the publishing site can be created successfully.
I checked the ULS log and found that the Device Channels list was needed to be requested when creating the publishing site. So if we have no permission on the Device Channels list, we cannot access the list and then the creation of the publishing
site will fail.
It is by design that Read permission is needed on the Device Channels list when creating the publishing site.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to create a Site Content in Web Page Composer

Hi All,
I am new to WPC and would like to explore more on the same. I tried following some blogs inorder to create and publish Web Pages.
I was stuck at a point where we need to create a site content. I guess all the permissions required to access each folder is properly set.
When I tried to create a content like for example an article... A window pops up which says please select a document type and I dont have any option to select whereas I have a cancel and next button at the bottom of the screen. When I click next nothing happens.
Did anyone went through this issue? What am I doing wrong? Did I fail to set some role to the author creating content?? Author has wpc_editor_role though.
Regards,
Rekha Malavathu

Hi Sandeep,
The popup window (which I suppose is an XML Editor) doesnt have any UI Element to select when I try to create any content... may it be an Article, Linklist, etc...
I am using WAS 2004S SP 14. As I mentioned, all the xml and xsl files are available in the folder and even in the KM Configuration.
My problem is, I am unable to create a content as the popup window is blank... No UI Element to select or enter.
Regards,
Rekha Malavathu

Unable to create sub site after setting up site subscription in Sharepoint Foundation 2013

Hi, All,
I have set up sit subscription in to the sharepoint. I have a Site collection which is assign to specific tenant group. I have assign sevral custom features to the tenant group. What happening now is, when I am creating a sub site, it throws an error that
specific feature(e.g CustomList feature) is not available. So I added that feature definition to tenant group. Again I tried to create sub site. Now it shows error that specific feature(this time it shows AnnouncementList feature) is not available. So I added
that feature too. Now its showing me these kinds of error continuously.
So what required is I need to add all the default features to my tenant group. Do you have idea how can I add those feature by single command instead of I add it to the tenant group one by one ?
Thanks.
Your help is appreciated.

You can use Powershell to create a Feature Pack that will add multiple features to a tenant group. Here's one for the default Foundation Features.
http://gallery.technet.microsoft.com/office/SharePoint-2013-Foundation-d3d1637f
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Unable to create site hierarchy for any variation label

I am unable to create a site hierarchy for our source variation and any subsequent variation labels we setup. The error when trying to do so is:
“An error was encountered performing this operation.
You may re-try the operation, and you may need to clean up the half-created data first before re-trying. If the problem persists, please contact your system administrator. “
We have a test farm which didn't have this problem.
Any help gratefully received.

Thanks Mark. I'll certainly give that a try. But today I started digging into the SharePoint Logs and found this entry:
10/01/2007 11:42:59.28 w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception An unhandled exception has occurred. Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'. System.InvalidCastException: Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'.     at Microsoft.SharePoint.Publishing.PublishingPage.FixWebPartUrlsForVariation()     at Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.CreateVariantPage(PublishingPage sourcePage, PublishingWeb targetArea, String destPageWebRelativeUrl, String pageLayoutName, String title, String description, Boolean copyResources, Boolean enforceMajorVersion, SPWeb& webToClose)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationInner(VariationLabel varla...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...bel, String pageLayoutName, String destPageName, String title, String description, Boolean copyResources, Boolean overrideStopUpdate, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, Boolean stopAutoSpawnAfterDelete, Boolean sendNotificationEmail, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationAuto(VariationSettings variationSettings, VariationLabel varlabel, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeepForChildren(VariationSettings variationSettings, PublishingWeb sourceParentPubWeb, VariationLabel varlabel, Boolean isCrea...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...teHierarchies, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeep(VariationSettings variationSettings, ReadOnlyCollection`1 varLabels, Boolean isCreateHierarchies, Boolean recurse, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.VariationSettings.CreateHierarchies(LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.CreateVariationHierarchies()     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.DoWork()     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__11()     at Microsoft.Office.Server.Diagnostics.Fir...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...stChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowException, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__f()     at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowExcep...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...tion, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.ThreadEntryPoint()     at System.Threading.ThreadHelper.ThreadStart_Context(Object state)     at System.Threading.ExecutionContext.runTryCode(Object userData)     at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)     at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ThreadHelper.ThreadStart()
This exception totally amazes me because I thought from WSS 3.0/MOSS 2007 onwards all Web Parts could be derived from System.Web.UI.WebControls.WebParts.WebPart. So does this mean I will have to change all of them?
Did you run into anything similar?
Thanks.

When trying to create a site, I am unable to save the site.

Dreamweaver tells me "WARNING: the Spry assets folder is not inside the site. Please select a valid folder in the local site root." Help! I am unable to create any site.

Also, when will the next version of GoLive (the real pro version, not the watered down entry level version Adobe now offers) be ready? It is was so vastly superior to DW.
In case you've been living on a distant planet, GoLive is no more. Adobe discontinued it in April, 2008. The code it generated was horrible and didn't meet W3C modern web standards.
They tell you to locate your site before you create it.
The first step in creating a site is to DEFINE a local site folder in DW. Without this critical first step, DW cannot manage your pages, links, CSS files, and other assets for you.
Go to Site > Manage Sites > NEW and tell DW where on your hard drive you want to keep your local site folder.
See "Creating your first web site in DW CS5":
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Good luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Cant create new site - it crash immediatelly

I bought CC in may as I work on 2 computer - IMAC and book Air - and I am unable to create a site - or opening from my backup portable harddisk.
my Book air is now updated - the help desk is -as usual when you need help - off due bank holidays -somewhere - not in Switzerland
when i try to open a "recent" i get only the round - circle running unit it crushes - same for opening new site.
thanks and higly recommend to have any helps -

When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to Create site collections with any template

Hi All,
We are using SharePoint 2013 , after long time am tried for create new BI center in one of our web application , but its taking more then 10 mints , the page is loading more then 10 mints , after that i just refresh the page and i got a error "Sorry
this site was created already with this name".
so , i try to enter the new site URL am getting error the page is not valid .
i thought this was on issue with requirements on BI Center , so i checked the web application associated service application , but i have Visio Graphics service application , Excel Service Application and Performance point service application running for
this web application .
after some time i tried to create team site template site collection , i am facing the same issue again , i really dont know what is the issue with my CA , can any one help me to solve this issue ASAP.
i tried to create site collection from PowerShell also , but am facing the same issue , even i got the same error while try to create sub site. i tried with refreshing IIS also , but its not worked.
Am waiting for your valuable response .
Thanks,
Mani L
Mani L

Hello Mani L,
Please make a host entry on you WFE server for the URL of the site you are trying to create. Then try browsing the site from same server.
- First check if the binding is correctly configure in Alternate Access mapping on Central administration
- Same binding should be provided under IIS for the web application
If this doesn't resolve the issue then, for testing create a host entry for central admin hostheader url.
To do this follow below mentioned steps:
Go to Start -> Run -> Type drivers
open HOSTS file in a notepad
type IP address of the APP server and beside that with a tab key type URL of the site
Save the file and try to browse the site in a fresh new browser after closing all the browser.
Where SharePoint.com is my Host Header URL and IP address is the server IP where the site is hosted (APP Server generally)
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Unable to Create Customer Profile at Site Level

Hello All,
I am working on R12 Customer Conversions.
As part of this, i am trying to load the customer profile amounts at levels. 1. Account Level 2. Site Level
At Account Level, When ever i create a new account defaultly a new record is creating in hz_customer_profiles for the account_id. And i am passing 'cust_account_profile_id' to the hz_customer_profile_v2pub.create_cust_profile_amt. And able to do create customer profile amounts successfully.
But
At the Site level, when ever i create a new site, its NOT creating a record in HZ_CUSTOMER_PROFILES. If it creates i can have this 'CUST_ACCOUNT_PROFILE_ID' and pass it to the API
but its not doing so.
Could you please tell is there any setup for Creating HZ_CUSTOMER_PROFILES while creating SITE Use.
Please help me in this.
Thank you,
Aush

Hi Aush,
There is not specific setup for the same. You might not using the APIs correctly. Did you use hz_cust_account_site_v2pub.create_cust_acct_site API to create site? Once you create the site, you need to defined the site use using api, hz_cust_account_site_v2pub.create_cust_site_use. This Site use api will insert the record into HZ_CUSTOMER_PROFILES for the site record.
Once you create the site use, then you can define the profile amount using hz_customer_profile_v2pub.create_cust_profile_am API. Hope this is helps you.
- Kiran

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

Unable to create database error

Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
Thanks

There is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to create RAID on SPARC-Enterprise-T5220

hi:
i got the following issue on my SPARC-Enterprise-T5220.
i have constructed the RAID-1 on 4 disks out of 6.
i have created RAID-1 on OS Disks using raidctl command on single user mode
and i have created RADI-1 on other two disks. but i'm unable to create RAID-1 on the rest of the two disks.
here i s the info i am giving
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@1,0
2. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
/pci@0/pci@0/pci@2/scsi@0/sd@2,0
3. c1t4d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
/pci@0/pci@0/pci@2/scsi@0/sd@4,0
disks 2 and 3 are under raid but where as 0 and 1 are not
i am trying to construct raid on that disks it is giving following error
# raidctl -c c1t0d0 c1t1d0
Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
Too many arrays.
here is my OS release information
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
SunOS 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
would any body help me on this.
thanks in advance
SN

Hello sir,
I work for one of Sun's Channel Development Partners and had a partner site the same problem today, but with a T5240.
If you check with the "Disk Volumes" section of the T5120/T5220 Admin Guide, it tells us that the integrated LSI controller only supports up to two volumes at a time.
http://docs.sun.com/source/820-2179-10/Volume-man.html#50606103_28600
If you need more options for hardware RAID configuration of the internal disks, Sun offers an internal PCI-E SAS RAID HBA:
SGXPCIESAS-R-INT-Z
Sun StorageTek (TM) 8-port internal SAS RAID Host Bus Adapter with RAID 0, 1, 1E, 10, 5, 5EE, 50, 6, 60 support, 256MB of onboard memory and 72 hour Battery Backed Write Cache. RoHS 6. X-Option.
List Price: $599
You'd also want this cable kit to go with it:
SEDX9SA2Z
Internal SAS Cable Kit required to use Sun RAID Card SG(X)PCIESAS-R-INT-Z for use with the SPARC Enterprise T5220
List Price: $40
Here is documentation about the adapter:
http://docs.sun.com/app/docs/coll/sas-raid-hba-int

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

Unable to create R3 site

Similar Messages

Maybe you are looking for