Unable to create reports in Crystal Reports 2008
In Crystal Reports 2008 we are getting the error message while creating a new report or refreshing the old ones.
Logon failed.
Details:HY000:[Oracle][ODBC][Ora]ORA-06413: Connection not open.
[Database Vendor Code: 6413]
Tired creating a new DSN, does not work.
Using Oracle databse and ODBC connection.
Please help
Wini
I have found another thread really interesting, might help you too.. here it is
There are a number of reasons this error can occur. The most common is that the TNS connect descriptor can't be parsed correctly.
Read an article about this -- The main thrust was:
"You are using reserved symbols to identify the client computer. Sqlnet/Net8 has a character set for keyword value entries, which is restricted to single-byte characters. However certain single-byte characters are reserved symbols within Sqlnet/Net8. These reserve symbols are:
( ) = \ " ' #
Sqlnet/Net8 passes client information, such as host, username, and program executable to the database during connection establishment as part of an 'exteneded' connected discriptor. Using a reserved
character can cause connection failures resulting in ORA-6413, Connection not open errors. In particular the open and close parenthesis symbols ( ) being used to identify the client computer.
This would be noticeable in the Sqlnet.log where the errors are shown."
This refers back to a bug Bug No. 813483
Problem: When a WinNT client machine is rebooted, the first connection attempt to the database fails with
ora-6413.
Diagnostic Analysis: connection fails on the first attempt after a machine reboot. Subsequent tries succeeds.
Reproducibility: every time.
The second issue: Check your tnsnames.ora file if you are missing the "_" or "underbar / underscore" of any line, this error will be returned. ( ie, like ADDRESS_LIST or CONNECT_DATA
ie:
xxxx.foo.bar.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = server.foo.bar.com)
(Port = 1521)
(CONNECT_DATA = (SID =xxxx))
Source [http://www.experts-exchange.com/Databases/Oracle/Q_20098276.html]
Regards
Jehanzeb
Similar Messages
-
Need to create 6 sub reports in Crystal Reports 2008 - Advise Required
Hello All,
I am trying to create a report with 6 sub reports in Crystal Reports 2008.Each sub-report is filtered by a filed called Error Status.Finally i need to parameterize the report based on Rec Date ( This is also i field in table from where i am puling data). I tried to link sub reports but was not able to. Please guide me.
Thanks !Hi,
I linked the fields but no data appears in the main report. Any advise would be greatly appreciated?
Thanks,
Praneeth -
Unable to Run Report on Crystal Reports Server 2008
I have a weird issue with one particular report. The report is quite basic in which it dumps all of our patients via a single table from SQL Server. There are no parameters or select experts. The report has been written to group by the patient's SSN. I then have a formula written that hides all of the patients that only appear once under that SSN. Basically, the report is only displaying patients with duplicate SSN. The report works fine inside of Crystal Reports 2008. There is approximately 137,000 rows and after the formula to only show duplicates, it shows about 900 records. This report takes only 6 seconds to run inside of Crystal Reports 2008. However, when I upload the report onto Crystal Reports Server 2008, the report starts to load and then I get a message from Internet Explorer that says "Stop Running this Script." If I continue to let the script run, Internet Explorer grows to use 3.6GB of memory and the report never loads. I am not sure why this is the only report that is having a problem. Is there some maximum number of groups that Crystal has?
I have checked the following directories and I haven't been able to see any errors related to my problem. I checked C:\Windows\system32\logfiles and C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\logging. However, if I schedule the report, it works just fine. I just can't run the report on demand without receving the "Stop Running Scripts" error.
-
Font style issue with exporting report in Crystal Reports 2008
Hi,
I got stuck on the below issue for a while. Please can anyone help on this?
When I designed and executed a report in Crystal Reports 2008 on my local PC, the font style and size used in charts were exactly what I was expecting.
However, after I exported the report to our BusinessObjects CMC and displayed it in InfoView, the font style and size in charts looked quite different from what they were in CrystalReports.
Any ideas of how to fix this issue?
Thanks!
BAIHi Nanda Kishore,
This is because you do not have proper rights on Business View Manager. Whenever you create a dynamic parameter in crystal and try to save the report on BO, it creates a Business view automatically. Now in your case, it is unable to create a business view due to insufficient rights.
Go in Business View Manager u2013 Repository exploreru2014You will find Dynamic Cascading Prompts folderu2014Right click on that and go in rights and add your user information and give full rights.
Also make sure that your BO and CR designer on same version and patch level.
Thanks,
Sastry -
Report containing 15 sub reports crashing - Crystal Reports 2008
I am using Crystal report 2008 with all latest service packs applied. I have more then 20 different reports wich work absolutely fine and never crash. One of my report contains 15 sub reports since its bringing data from 15 different queries. This consistently keeps crashing everytime I try to run it. Not sure what could be the root cause.
We are using Postgres database and connected to it with ODBC connection using Microsoft DSN.
- All Subreport data is being displayed on Report Footer
- All subreports are included in the Main report page header section. (I have also tried doing it on report footer section but it still crashes)
I have tried searching through the forum and did not find similar issue resolutions. Did someone face similar problems before?
The crash message is:
"crw32.exe has encountered a problem and needs to close. We are sorry of the inconvenience."
Error report contains this data:
AppName: crw32.exe AppVer: 12.2.0.290 ModName: psqlodbc35w.dll
ModVer: 9.0.2.0 Offset: 0004c538
I am using Windows XP
Crystal Report Version Details:
CR Developer Version 12.2.0.290
Product Type: Full
Let me know how can I debug this issue? Any help is appreciated.@Don - We performed extensive testing for this crash issue and found that now this crash is not happening only in one scenario. So we have partially fixed this.
Now the report crashes if I get disconnected from database and reconnect. This is what happens
1. open the report in crystal report 2008
2. try to run the report when db is connected- it works fine.
3. Now disconnect the database (we are using ssh tunnel to connect to db so we just close the tunnel)
4. now try to refresh the report - it fails to retrieve data.
5. Now close the report without saving it.
6. Now Close Crystal Report.
7. Now Connect the DB using ssh tunnel so crystal report can connect.
8. Now open Crystal Report
9. Launch the target report.
10 Preview the report - it works for first time.
11. Now do a refresh keeping same parameters - Report crashes here.
- I tried these steps with some of my other reports and they do not crash.
- Now I have only one report which contains a Postgres Query with date range,order by and a union join.
- No subreports now - I am trying to run this one subreport as a standalone report which I created from scratch(using blank report wizard) and just copied the query.
Any more pointers would help. -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
How to view multiple reports using crystal reports 2008
Hi ,
I am working on vb6 project where in i am trying to generate reports using crystal reports 2008.
For this , i am making use of Interop Form Wrapper class in vb6.
I have a business requirement where in i need to view multiple reports on my screen.
please suggest me as to how this can be achieved.
Thanks in Advance
Regards,
RamnathHi Ludek,
I am directly now using crystal report viewer control in my vb6 project.
As mentioned in previous mail, i have created a Interop Wrapper class over crystal report viewer control in .Net using visual studio 2008 and i am making use of wrapper class in my vb6 project.
I am able to access all the properties that have been defined in my Interop wrapper Class but the only stuff i need is to view multiple reports generated one after the another for a single button click Event.
Please find below the code that iam using to load and generate reports.
Note:
1. frm is the instance of my Interop Wrapper Class built over CR viewer control
2. All the user defined methods of Wrapper class that you see below will internally call the actual crystalreportviewer properties defined in my Wrapper class
Say for e.g frm.DisplayToolbar(True) will internally execute crystalreportViewer1.DisplayToolbar = True
frm.SetReportSource(strRptFilePath,0)
frm.SetSelectionFormula(strrecordSelectionFormula)
frm.DisplayToolbar(True)
frm.ShowExportOption(True)
frm.ShowPrintOption(True)
frm.ShowRefreshOption(True)
frm.ShowPAgeNavigateOption(True)
frm.ShowZoomOption(True)
frm.ShowParameterPanelOption(True)
frm.Show()
Thanks in Advance
Regards,
Ramnath -
Database fields empty after creating a new (Crystal) Report in MSY
Hello,
I have some issues to use Crystal Reports in Mobile Sales Maintenance (MSY). The situation is as follows
My example is based on this standard report, which is working
Report Name: BPartnerActivities
Reporting Tool: Crystal Reports
Category: Standard reports
Subcategory: Lists
Report Type: Report
Data Source: Business Content provider
Business Content Provider: BPActivities
My requirement is to build a new report, which is based on the standard "BPartnerActivities" Report. If I use the "copy" functionality, I get an working Copy of the standard report. However, I need to modify the Business Content Provider, but I do not want to make the modifications on the standard content provider "BPActivities".
I am now forced to used the "copy" functionality to create a copy from "BPActivities" for my own Content Provider "My BPActivities copy", which I want to use in a new report.
Issue:
I cannot modify the defined Business Content Provider after using the "copy" functionality and hence forced to create a new report from scratch to be able to set a different Content Provider.
I create my own report "MyBPartnerActivities" based on the standard report "BPartnerActivities" using the same settings and assign my new business content provider.
If I use the "Design Report" or "Modify Report" button, the Crystal Report designer pops up. Now the problem, the Crystal Report designer does not offer me any data below "Database fields".
In the standard report, the "Database fields" has a child element "BOACTIVITY-ttx" with several field options. My own created report from sratch does now have anything?!
Why my report does not offer my any data or is there anything additional to do?
Another Test
I tried to create another report using the standard content provider "BPActivities", but I have still the same issue.
In addition I recongized that the "browse data" fuctionality does not work on the fields in the standard report. The path to the database file does not exist. It starts with "C:\WINNT\...", but my system has "C:\WINDOWS\...". But the executed report is able to retriev the data?!
Unfortunately was not able to find any proper documentation, but I would really appreciate any help.
Regards,
AndreasUpdate
It looks like that the *.ttx file is not uploaded/create to/on the MSY system. The system shows the file in the Crystal Report Designer, but there is no file on the file system. The confusing thing is, that any standard report is still working and does not really complain about a missing ttx file. I think the content of the ttx file is somehow embeded to the report.
Does someone know how the system should behave? Should a ttx file be automatically created & assigned to any new report or do I have to create the file by my own every time?
Cheers,
Andreas -
CR2008 Not enough memory while exporting reports from Crystal Reports 2008
I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
<sectionGroup name="businessObjects">
<sectionGroup name="crystalReports">
<section name="printControl" type="System.Configuration.NameValueSectionHandler" />
<section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
</sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
<printControl>
<add key="url" value="http://myserver/mysite/PrintControl.cab" />
</printControl>
<crystalReportViewer>
<add key="documentView" value="weblayout" />
</crystalReportViewer>
</crystalReports>
</businessObjects>
<appSettings>
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
<httpHandlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</httpHandlers>
<compilation debug="false">
<assemblies>
<add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</assemblies>
</system.web>
<system.webServer>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
</handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
Report.Close();
Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM -
Creating Crystal Reports with Crystal Report Server XI
Hello,
I am new to Crystal Reports, i installed Crystal Reports Server XI R2 on Windows 2003 server with SP2 and was able to launch Inforview application and also Central Management Console Log On.
I can also see some sample reports which are installed during installation.
Now my next task is to create Crystal Reports using Crystal Report Server XI R2. How can we create a crystal report now by only using Crystal Report Server XI R2?
Do we have to install some other application to create Crystal Reports? I donot see any link on my server which i can use to create crystal reports. The only links which i can see are :
Business Objects-->
Crystal Report Server-->
.Net Administration LaunchPad
.Net Infoview
Business View Manager
Central Configuration Manager
Data Source Migration Wizard
Data Source Migration Wizard Help
Import Wizard
Online Developer Library
Publishing Wizard
Registration Wizard
Release Notes
Repository Migration Wizard
Please help
Thanks
VipinTwo ways to create reports:
1) You install the Crystal reports Designer (CRW32.exe).
With your Crystal Report Server, you should also have received a second CD that would have the CR designer.
2) You use the RAS SDK and create reports on the fly using the RAS report creation APIs - .NET or Java. Since you are in the .NET developer forum, I assume you might be interested in the .NET RAS SDK. Here is a list of resources i would recommend:
Links to samples are [here|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/netBusinessObjectsEnterpriseSDKSamples]
[How to use the RAS SDK .NET with In-process RAS Server|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32]
[Programing RAS|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050afe0-2fa5-2b10-658d-98f214ba6a4a]
[Choose the Right SDK for the Right Task|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f006a5e6-7e64-2b10-8a84-8b15ca5cacfc]
For more help, search these forums (there are some great posts in here), the [notes database|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true]
[articles|https://www.sdn.sap.com/irj/sdn/businessobjects-articles] and [downloads|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Ludek -
Missing column at the end of report in Crystal report server 2008 VI
When we run the reports in Crystal report server 2008 VI, for some reports we see the last column is missing some characters. I have few reports that show numbers with decimals at the end of the report, but in CMC it cuts the number at the start of the decimal. I only see the numbers upto the decimal. When I run the same report in Crystal designer, everything works fine.
I had the same problem with CR developer 2008 and I used the following code to fix it:
Private Sub SetMargins(ByVal myReportDocument As ReportDocument, ByVal left As Integer, ByVal top As Integer, ByVal right As Integer, ByVal bottom As Integer)
Dim myPageMargins As PageMargins
myPageMargins = myReportDocument.PrintOptions.PageMargins
myPageMargins.leftMargin = left
myPageMargins.topMargin = top
myPageMargins.rightMargin = right
myPageMargins.bottomMargin = bottom
myReportDocument.PrintOptions.ApplyPageMargins(myPageMargins)
End Sub
Any help is greatly appreciated.HI Don,
Install the same default printer as what you have onto the CRS server then what you should be the same. Also, which viewer are you using, ActiveX, DHTML or Java on the CRS Server?
Thanks
Don -
Error when I deploy a report on crystal reports server 2008 V1.
Hi ,
I am getting below error when I deploy a report on crystal reports server 2008 V1. I have installed the crystal server on Linux machine.
"A server communication error occurred. All servers with kind rptappserver could be down or disabled by the administrator. "
Please help.
Thanks,Hi
use the Universe Designer (designer.exe).
Regards,
Stratos -
Problem deploying OLAP report to Crystal Reports Server
I have developed a simple OLAP cube report using Crystal Reports Developer (11.0.0.1.1282). The report correctly previews and shows values against the cube that I have chosen as the datasource. The datasource is not my local computer but another computer (on the same network) that contains an Analysis Services 2005 cube. Crystal Reports Server (11.5) is installed on the same computer that contains the datasource.
Using the CMS I uploaded the OLAP cube report to the server. After that was finished I changed the "When viewing report" radio button to "Use same database loging as when report run" in the Process/Database setcion. I logged into the InfoViewer and navigated to the report and executed it. When the report executes I get the following error:
Crystal Reports: Print Engine Error
Unable to retrieve Object.
Crystal Reports: Print Engine Error
I wanted to make sure that the server was running correcly as it is a fresh install. So I created a standard report that connects to a SQL Server 2005 datasource and displays the contents of a table. When I uploaded this report to the Crystal Report Server it rendered correctly.
What do I need to do to make the OLAP cube report render correctly?I'm not sure about using OLAP with CR on the server, maybe someone else will have more input on that.
When using OLAP on the server I recall that you must install PTS (it was like OLAP - ODBC) but it didn't require any config just to be installed on the server.
You mentioned CR 11.0 what version is the server? I don't believe SQL 2005 analysis services was ever tested with XIR1 (version 11). You can check the supported platforms by clicking the business obejcts link above and selecting articles, then your version.
Do you have olap intelligence? That was a seperate product on version 11 that was used to create .car reports off of OLAP.
Regards,
Tim -
Open ECC report in Crystal Reports
Hi,
Question, hope you have some info on this...
I want to try & open a custom report which is built in an ECC system (report is currently run as a "Yxxx" transaction) in Crystal Reports. Purpose is to further edit and format the report using Crystal Reports functions.
Does anyone know what path to follow here? Do I have to set up a new connection for the given source system?
Thanks for any tips advice.
Ps. I have Crystal Reports 2008 and also the BI Integration Kit (not sure if this is used / required).
Thanks,
WillemThere are transports that the SAP Integration Kit delivered. you may have already installed this on your BW, but they would need to be installed on ECC if you want to query there. Once these are installed, Crystal should be able to see an SAP - Table, Cluster, Function Data Connection allowing you to connect to your ECC.
You should review the SAP Integration Kit doc - it spells out authorizations required, how to handle security, etc. -
How to set DbConnections when scheduling a crystal report using Crystal Reports Server Java SDK?
Post Author: Manjula
CA Forum: JAVA
Hi,
Trying to schedule a report using Crystal Reports Server Java SDK. Want to pass DBConnections from API, though passing DBConnections, the report is not being scheduled and says "Failed to retrieve data from the database.Details:[Database Vendor Code:6550].
Would be thankful if someone could answer my point as applicable.
Here is the code attached.
ISDKList dbLogons = oReport.getReportLogons();int dbLogonSize = dbLogons.size();
for(int i=0; i<dbLogonSize; ++i) {
IReportLogon dbLogon = (IReportLogon)dbLogons.get(i);
dbLogon.setDatabaseName("DBname");
dbLogon.setUserName("usrname");
dbLogon.setPassword("pwd");
Thanks in advance.Post Author: Manjula
CA Forum: JAVA
Ted,
Thank you for your valuable information.
First, tried scheduling on Central Management Console and then with the java code.It worked fine, but here is another question for you.
On the Console, a report exists with ServerName and UserName harcoded and when trying to set ServerName and UserName from the java code, its throwing exception. Where as Password is not set on Console, am able to set password from java.
And DatabaseName is not set on Console (non editable), unable to set the same from java too. Why is it so?
So, my question is - though ServerName,DatabaseName,UserName,Password exists on the Console report, can't I override those parameters from java?
Would be greatful if you answer my question and provide me some guidance.
Thanks in advance. -
How to make crosstab report in crystal report
Hi all ,
I want to make a crosstab report in crystal report
my query is like this
select YearDate.year ,
(currentasset.currentaset / currentliability.currentliability ) as CurrentRatio
,(currentasset.currentaset - Inventory.Inventoryaset / currentliability.currentliability ) as QuickRatio
from
select distinct YEAR(JDT1.RefDate) as year from JDT1
)YearDate left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11'
group by YEAR(JDT1.RefDate)
)currentasset on YearDate.year = currentasset.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as Inventoryaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11.05'
group by YEAR(JDT1.RefDate)
)Inventory on YearDate.year = Inventory.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentliability from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '21'
group by YEAR(JDT1.RefDate)
)currentliability on YearDate.year = currentliability.year left join
order by YearDate.year
So if i view the data in sql server it should be like this
Year CurrentRatio quickRatio
2006 501 100
2007 600 200
2008 700 300
2009 900 400
I want to make a crosstab with the column is year . the Year is dynamic according to the selection
So if i select the year from 2007 to 2009
It should be like this in report
2007 2008 2009
CurrentRatio 600 700 900
QuickRatio 200 300 400
How can i make it in Crystal report ?
I have use the template in crosstab crystal report, but there is not suitable.
Can i make manually. ?
Thanks in advance
Regards
KKHi kevin,
thanks for your respond . Actually, it's work.
But i have some issue again.
How can i make a grouping
So the grouping per Item
For example
2006 2007 2008
Group 1 Item A 5 6 7
Item B 7 8 9
Group 2 Item C 9 0 0
Item D 8 8 9
And another question, Is there always have row summary ? It seems that after the 2008 column, there is a total column, Can I remove this ?
Thanks in advance
regards
KK
Edited by: kah kian on Jun 2, 2011 4:17 PM
Maybe you are looking for
-
It goes on constantly while the computer i s on, with like a 2 second delay, and to be honest it's driving me mad. I may just end up taking it in, but if I have to get it replaced I dont want to lose all my files and programs.
-
How to set render value in a bean class
HI, I am new to jsf,in a jsf I put two images using <h:graphicImage> tag now my requirement is when the page is loaded one image has to appear and whenever I click on the first image the first image has to disappear and second image has to appear....
-
hi The system automatically created a free goods sub- item for the order with purchase order number ##LO605-ZA##14. The system runs pricing for this sub-item even though it is free of charge. Later i will give discount r100.but i need to know the set
-
IPhoto 11 (9.1.5 version) Program works fine has been doing so for a year. Never used "Places" feature before. Now when I try it the screen freezes in the "get info" mode. I see a yellow sticky type deal with "To Get Started wtih Place" and some
-
HT1459 my ipod wont connect/turn on and i cant find my serial number to get customer support :(
The ipod is messed up how can i go about fixing it, and or sending it in to get a new one.