Unable to create Search Service Application
Hi All,
When I tried to create Search Service Application in Central Admin, I'm getting Error on creation. The below is the detail error.
Errors were encountered during the configuration of the Search Service Application.
Microsoft.SharePoint.SPException: The timer job completed, but failed on one or more machines in the farm. at Microsoft.SharePoint.Administration.SPTimerJobAsyncResult.End()
at Microsoft.SharePoint.Administration.SPServiceApplication.ProvisionInstances() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.Provision() at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Provision() at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.b__22()
at Microsoft.Office.Server.Search.Administration.SearchAdminUtils.UpdateIgnoreSPUpdatedConcurrencyException(String description, SearchAdminUtilsUpdateDelegate updateDelegate, SearchAdminUtilsRefreshObjectDelegate refreshObjectDelegate) at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.CreateSearchApp()
at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
5/2/2011 11:49:08 AM
Could any body guide, where I'm missing?.
Thanks
When I looked in EventViewer for more error details, the below is the error message.
Access to 'Global\Microsoft.SharePoint.SPIisProvisioningLock' is denied
any ideas?.
It doesnt work.
I Stopped the search service and then try to receate the Search sercie application with the gui. In the log I get the same error.
SearchConfigWizardFinish page failed with exception. System.InvalidCastException: Unable to cast COM object of type 'Microsoft.Office.Server.Search.Administration.MSSITLB.CGatheringManagerClass' to interface type 'Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherManagerAdmin3'.
This operation failed because the QueryInterface call on the COM component for the interface with IID '{0FF1CE14-013A-0000-0000-000000000000}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)).
Server stack trace: at Microsoft.Office.Server.Search.Administration.Gatherer.get_AdminObject() at Microsoft.Office.Server.Search.Administration.Gatherer.ProvisionGlobalProperties()
at Microsoft.Office.Server.Search.Administration.Gatherer.Provision() at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Provision() at Microsoft.Office.Server.Search.Administration.SearchAdminUtils.DeployLocalServiceInstance[T](T
localSearchServiceInstance) at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.Create(AbstractSearchConfigWizard wizardOM) at Microsoft.Office.Server.Search.Internal.UI.SearchConfigWizardFinish.ExecuteConfigurationTimerJob(SPLongOperationState
longOperationState, String& strRedirectPage) at Microsoft.SharePoint.SPStatefulLongOperation.SetThreadCultureAndRun(RunStatefulOperation runOperation, SPLongOperationState state, CultureInfo culture, CultureInfo uICulture)
at Microsoft.SharePoint.SPStatefulLongOperation.<>c__DisplayClass6.<Run>b__0(Object state) at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object state) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) Exception
rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData&
msgData) at System.Threading.WaitCallback.EndInvoke(IAsyncResult result) at Microsoft.SharePoint.Utilities.SPThreadPool.RunAsyncWorkItem(ImpersonatedCallbackParam param, TimerCallback timerCallback, Object timerState,
Int32 timerPeriod) at Microsoft.SharePoint.Utilities.SPThreadPool.RunAsyncWorkItemWithImpersonation(WaitCallback workItemCallback, Object workItemState, TimerCallback timerCallback, Object timerState, Int32 timerPeriod)
at Microsoft.SharePoint.SPStatefulLongOperation.Run(RunStatefulOperation runOperation) at Microsoft.Office.Server.Search.Internal.UI.SearchConfigWizardFinish.<>c__DisplayClass2.<Commit>b__0(SPStatefulLongOperation longOperation)
Similar Messages
-
How to create Search Service Application in SharePoint 2013
When I am Creating Search Service Application through SharePoint Central Administration I am getting the error:
Path of how I created It:
Central Administration->Application Management->Manage Service Applications
Here Click on New and Select Search Service Application
How Should I create new search service application?
As I want to create crawled Property and manage property for Search Center in SharePoint On Premises.Hi darsh,
For creating a new search service application, you can refer to the blog:
http://technet.microsoft.com/en-us/library/gg502597.aspx
http://blogs.technet.com/b/praveenh/archive/2013/02/07/create-a-new-search-service-application-in-sharepoint-2013-using-powershell.aspx
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378
For your issue , please refer to the article:
http://praveensharepointknowledgebase.wordpress.com/2012/05/29/error-while-creating-search-service-application/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Unable to delete search service application
We accidentally deleted the three databases related to Sharepoint Search. Luckily, this was done on the test server. So now I have the search service application but no related databases. I want to delete this search service application
and recreate it but it won't let me do it because during deletion it's looking for these databases and I get an error message that it can't find them. Is there any way to either recreate these databases or force deletion of this Search Service application?
thanks,Hi,
If you have the backups for these databases related to SharePoint Search, you can try to restore them.
If you donot, you need to use STSADM.EXE command as below to delete the corrupted search service application:
Stsadm -o deleteconfigurationobject -id %GUID%
Reference:
http://blog.greenbrain.de/2013/11/removing-corrupted-search-service-from.html
http://blog.isaacblum.com/2011/08/08/force-delete-search-any-service-application-sharepoint-2010/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Unable to Create PowerPivot Service Application
I'm trying to get PowerPivot installed on my new SharePoint 2010 environment. This is using SQL Server 2012.
I've got 3 instances
Default - SharePoint 2010 installed here
POWERPIVOT - Installing PowerPivot defaults to this instance
TAB - A tabular installation of Analysis Services
I've got the PowerPivot WSPs deployed to the SharePoint farm but I'm pretty sure something is wrong with the installation because I get the following error when I try to provision the Service Application via PowerShell.
Command I'm Using
New-PowerPivotServiceApplication -ServiceApplicationName "PowerPivot Service Application" -DatabaseServerName SP2010 -DatabaseName SP2010_Service_PowerPivot -AddToDefaultProxyGroup:$true
Error I receive
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm.
At line:1 char:33
+ New-PowerPivotServiceApplication <<<< -ServiceApplicationName "PowerPivot Service Application" -DatabaseServerName sp2010 -DatabaseName SP2010_Service_PowerPivot -AddToDefaultProxyGroup:$true
+ CategoryInfo : InvalidData: (Microsoft.Analy...viceApplication:
NewSPGeminiServiceApplication) [New-PowerPivotServiceApplication], GeminiException
+ FullyQualifiedErrorId : Microsoft.AnalysisServices.SharePoint.Integratio n.PowerShell.NewSPGeminiServiceApplication
The PowerPivot service does not appear in Windows services or in the SharePoint Services Running on this server. I've read that there are some issues apparently with the DLL deployment when having SharePoint installed on a separate instance as the POWERPIVOT
named instance. I've followed the guidance here: http://blogs.msdn.com/b/ahmad_adainat/archive/2011/01/02/sps2010-powerpivot-system-service-is-invalid-or-does-not-exist.aspx but that did not seem to help.
certifications MCITP, MCTS, MCPD | blog
http://corypeters.net | twitter
@cory_petersI've gotten a bit further.
I was updated to April 2012 which left me with a SharePoint version number of 14.0.4763.1000. Apparently the PowerPivot Configuration Tool only wants to see SP1 and no CU's, specifically 14.0.6029.1000.
(The follow steps are a terrible idea but worked for me. Note that this is not a production environment).
I modified the registry key HKLM\Software\Microsoft\Office Server\14.0\BuildVersion
I changed the build version from whatever I was on to 14.0.6029.1000.
(save your existing value)
I then launched the PowerPivot Configuration Wizard (which worked!, before it was failing claiming that I wasn't on SP1)
I think changed the key back immediately to what was there originally
Ok, so the above I think will work until Microsoft patches the Configuration Wizard so that it is not so specific to a single build. However, this is not the best way to go about this. I think the best way is to instead run everything via PowerShell. I think
the following script will configure PowerPivot correctly regardless of version and without the usage of the PowerPivot Configuration Wizard. Note: The PowerPivot Configuration Wizard runs through a number of prechecks such as confirming that the Secure Store
is working correctly, etc. So without those prechecks there could still be some missing steps.
cd 'C:\Program Files\Microsoft SQL Server\110\Tools\PowerPivotTools\ConfigurationTool\Resources\'
. .\ConfigurePowerPivot.ps1
$password = ConvertTo-SecureString "pass@word1" -AsPlainText -Force
SetEngineServiceCredentials 'DOMAIN\SQLService' $password
New-PowerPivotEngineServiceInstance -Provision:$true
New-PowerPivotSystemServiceInstance -Provision:$true
New-PowerPivotServiceApplication -ServiceApplicationName 'PowerPivot Service Application' -DatabaseServerName 'DBSERVERNAME' -DatabaseName 'PowerPivotServiceDB' -AddToDefaultProxyGroup:$true
Set-PowerPivotSystemService -WorkbookUpgradeOnDataRefresh:$False -Confirm:$false
EnableSiteFeatures 'http://webappurl' $true
$password2 = ConvertTo-SecureString "pass@word1" -AsPlainText -Force
CreateUnattendedAccountForDataRefresh 'http://webappurl' 'PowerPivotUnattendedAccount' 'PowerPivot Unattended Account for Data Refresh' 'DOMAIN\UnattendedAccount' $password2
AddMSOLAP5AsECSTrustedProvider 'Excel Services Application'
certifications MCITP, MCTS, MCPD | blog
http://corypeters.net | twitter
@cory_peters -
Unable to remove search service application - SP2010
I have a SSA that unfortunately lost its crawl database. It's not a critical DB so I then tried to remove it via Central Admin. The remove dialog appeared and I checked "remove data". The dialog sat for at least half an hour and at that
point I just killed it. I then tried to remove using the Powershell cmdlet Remove-SPEnterpriseSearchServiceApplication, which basically behaves the same way. I say "Yes", but the command never returns.
Is there another way to forcibly remove an application?Solution:
“id retrieved from search application link” (if you hoover over it you'll see it)
So you have to fill in the quotes the GUID from the search application. If it's 97s2fgd9-453k-3423-f334-8r78jd3bv2t6 you have to give:
Reference to this post:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/88f7998f-4a88-4928-ba59-e76d7f6afcdc
Alpesh Nakar's Blog
Alpesh
Just SharePoint
Just SharePoint Updates
SharePoint Conference Southeast Asia
Oct 26-27 2010 Contributing Author
SharePoint 2010 Unleashed
MCTS: SharePoint 2010 Configuration
MCITP: SharePoint 2010 Administrator -
Create SharePoint 2010 Search Service Application Using Powershell
Hi Team,
Could you please assist me in completing the search service application for
two server using powershell. Both the servers will be running all the component
Version SharePoint 2010
# 1.Setting up some initial variables.
write-host 1.Setting up some initial variables.
$SSAName = "Search Service Application"
$SVCAcct = "Domain\ServiceAccount"
$SearchAppPoolName ="DefaultAppPool"
$SSI = get-spenterprisesearchserviceinstance -local
$err = $null
$SSADBName="Search_AdminDB"
$SSADBServer="DBServer"
$host1="Server1"
$host2="Server2"
# Start Services search services for SSI
write-host Start Services search services for SSI
Start-SPEnterpriseSearchServiceInstance -Identity $SSI
# 2.Create an Application Pool.
write-host 2.Create an Application Pool.
#$AppPool = new-SPServiceApplicationPool -name $SSAName"-AppPool" -account $SVCAcct
$AppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
# 3.Create the SearchApplication and set it to a variable
write-host 3.Create the SearchApplication and set it to a variable
$SearchApp = New-SPEnterpriseSearchServiceApplication -DatabaseServer $SSADBServer -Name $SSAName -applicationpool $AppPool -databasename $SSADBName
#4 Create search service application proxy
write-host 4 Create search service application proxy
$SSAProxy = new-spenterprisesearchserviceapplicationproxy -name $SSAName"ApplicationProxy" -Uri $SearchApp.Uri.AbsoluteURI
# 5.Provision Search Admin Component.
write-host 5.Provision Search Admin Component.
set-SPenterprisesearchadministrationcomponent -searchapplication $SearchApp -searchserviceinstance $SSI
# 6.Create a new Crawl Topology.
write-host 6.Create a new Crawl Topology.
$CrawlTopo = $SearchApp | New-SPEnterpriseSearchCrawlTopology
New-SPEnterpriseSearchCrawlComponent -SearchTopology $newTopology -SearchServiceInstance $hostA
Source:blog.MSDN Author- Russ Maxwell
Thanks BasvaCould you please assist me in completing the search service application for
two server using powershell. Both the servers will be running all the component
Hi Basva,
Do you want to provision two search service applications in single farm?
Commonly, only one search service application is needed in a farm for Search function.
Here are articles for detail information about how to provision search service application using powershell:
http://blogs.msdn.com/b/jjameson/archive/2011/02/28/powershell-script-to-configure-search-in-sharepoint-server-2010.aspx
http://blogs.msdn.com/b/russmax/archive/2009/10/20/sharepoint-2010-configuring-search-service-application-using-powershell.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Showing search service application status error in SharePoint 2013
Hi All,
I'm unable to configure search service application in SharePoint 2013.When I go to CA > manage services , it is showing below issue.
On the place of started or stopped it shows 'error'. I'm using admin credentials here.
Then, when click on search service application, it shows details screen as follows
Thank youHI,I would recommend to re-create the service application.please check the below links that gives you the solution of the issue.
http://expertsharepoint.blogspot.de/2014/07/the-search-service-is-not-able-to_19.html
http://expertsharepoint.blogspot.de/2014/07/the-search-service-is-not-able-to.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
One Search service application for multiple web applications in a single server
We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one Search service application , create a Content source for each web
application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one Search Service application for all web applications and using Result sources ,
I am not getting the results. What could be the problem.Hi,
One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
Multiple SSA's will eat up RAM/CPU like a mother :)
As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
Thanks,
Mikael
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint -
I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Cannot Create ShrePoint Search Service Application for SP2013
Hi All,
Thanks in advance for any help you may provide.
While Creating a new search service application i have received the following error:
Errors were encountered during the configuration of the Search Service Application.
System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated. Parameter name: sddlForm at System.Security.AccessControl.RawSecurityDescriptor.BinaryFormFromSddlForm(String sddlForm) at System.Security.AccessControl.RawSecurityDescriptor..ctor(String
sddlForm) at Microsoft.SharePoint.Win32.SPNetApi32.CreateShareSecurityDescriptor(String[] readNames, String[] changeNames, String[] fullControlNames, String& sddl) at Microsoft.SharePoint.Win32.SPNetApi32.CreateFileShare(String name, String description,
String path) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateAnalyticsUNCShare(String dirParentLocation, String shareName) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionAnalyticsShare(SearchServiceApplication
serviceApplication) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateDefaultStoreLocation(SearchServiceApplication serviceApplication) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionRawEventStore(SearchServiceApplication
serviceApplication) at
The Fix with Sharing the Analitics_GUID Folder doesn't work, because it creates every Time a new one.
I really appreciate if you could give me a help.
Regards!
MartinHi all,
Thank you very much for your Response.
I have resolve this Issue yesterday, but didn't have time to answer.
I have tried everything (Create over Powershell and GUI) and as I say the fix with Analitics_GUID dont work. I have give everyone Full Controll on the hole Office Folder and Sub-folders.
I have look with the Reflector in the Code that causes the Exception and find that the SDDL string need some format in
that has an Domain Account and not Local Account. I mean some SID Domain ids.
So there is no way to create an "Complete" Installation ( not Standalone) without having a Domain. It is possible but you cannot create Search Service App and some
other Components didn't work as expected.
My Software was:
Windows Server 2012 Datacenter
SQL Server 2012 Enterprise with SP1
SharePoint 2013 Enterprise
So I created a "local" domain an it works.
Thank you very much
Regards
Martin -
Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
MichaelHi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael -
Getting error while editing content source of search service application
Hi,
when i edit the content source of SharePoint Search Service Application and click on OK Button then i get the following error.
Error it gives : An item with the same key has already been added.
and when i check it in ULS log it gives this.
Application error when access /_admin/search/editcontentsource.aspx, Error=An
item with the same key has already been added. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version,
FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs,
TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]:
An item with the same key has already been added. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version,
FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs,
TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Getting Error Message for Exception System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: An
item with the same key has already been added. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.ArgumentException: An
item with the same key has already been added.
at Microsoft.Office.Server.Search.Administration.SearchApi.WriteAndReturnVersion(CodeToRun`1 remoteCode, VoidCodeToRun localCode, Int32 versionIn)
at SyncInvokeEditContentSource(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc&
rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)).
Can anyone please help me, how can i resolved this issue.i am stuck :(
Thanks in advance
Muhammad LuqmanAlso tried with this code, but no succeed.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$searchapp = Get-SPEnterpriseSearchServiceApplication "Search Service Application"
$StartAddresses = "http://insite"
$cs = Get-SPEnterpriseSearchCrawlContentSource -SearchApplication $searchapp -identity "Local SharePoint sites"
$cs | Set-SPEnterpriseSearchCrawlContentSource –StartAddresses $StartAddresses
I have now only single content source and all others are removed now but still getting same error.
Muhammad Luqman -
Another post with a well-known title. Believe me, I know. Here's my setup;
- 1 Server 2012 WFE, SharePoint Server 2013, totally up-to-date, including the september 2014 hotfix
- 1 Server 2012 DB, SQL Server 2012
Installed SP 2013 using PowerShell, with the AutoSPinstaller. Worked like a charm. Got everything up and running, with some tweaking here and there to customize it to fit my situation. Now, I can't get the Search Service Application to work. Must have created,
deleted and recreated it at least 30 times. Used both PowerShell scripts, PowerShell line-by-line, Central Admin, heck, I even went so far as to use the configuration wizzard... No luck. I keep on getting the message that search cannot connect to the machine
that hosts the 'administration component'.
In order to avoid answers that suggest all the things I've already tried, here's a summary of the various scenarios I followed:
Tried both a dedicated application pool as well as the SharePoint Web Services Default
Timer job job-application-server-admin-service is running and not showing errors
IIS 8.0 is installed, so is .NET 4.5 (not the known perp of IIS 7.5 and .NET 4.0)
the get-SPEnterpriseSearchServiceInstance -local returns a healthy, online state
the SPEnterpriseSearchQueryAndSiteSettingsServiceInstance is also running
FireWall is disabled; registry has the BackConnectionHostNames modified with the necessary FQDNs
Accounts used to install and / or run the serviceapp all have sufficient rights - tried a dedicated managed account, SP_2013_SearchSvc, the SP admin account, and even the original Farm account; all to no avail, I keep on getting the error message.
Even tried stsadm to start the server search running - NOTHING WORKS!!!
As you might understand, this is driving me nuts. About to miss my second deadline, and no amount of IISresetting is making this go away. Been stuck on this issue for far too long, now (my searching is measured in days and weeks instead of hours, by now).
Whoever helps me solve this - you will have my eternal gratitude, and a nice bottle of Prosecco. Or whatever's your poison. You need to come get it, though. I´m situated in the Netherlands. Hey, you always meant to visit Amsterdam and see for yourself, right?
Thanks, community, for coming to my rescue!Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached... -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.
Maybe you are looking for
-
Please help with a weird issue
Hi all, I'll try and be brief here but i need to give a lot of info, so please bear with me and thanx a lot for reading... I Have just bought a K7N2 Delta MB, AMD Athlon 2800 XP (Barton Core), 120GB Western Digital HD, Sony DVD Writer, 2 x Corsair 25
-
Can't share local printer in Windows 7 Pro-error 0x000006d9
Hello, I recently purchased a laptop and wanted to share my local printer, attached via USB to my desktop (tower) in my home. My desktop runs Windows 7 Professional 64-bit. My laptop runs Windows 7 Home Premium 64-bit. When I try to share my printe
-
Encore subtitles don't appear on DVD
Hi, I've put subtitles on a video in Encore. They need to appear on the DVD (client does not want option to turn them off). All looks fine in the preview window, but when I build the project and burn to disc, there are no subtitles on the video. A
-
Hi expert, For my recuirement is developing a erecuting in webdynpro java. pls help this problem. i found lots of thread but everything as in ESS and webdynpro abap,BSP. so pls give some thread fo webdynpro java e recuiting portal. Thanks
-
If you jailbreak your ipod touch and crack the screen will the warrenty still work? Also, would the warrenty fix the screen? Would it cost money? Its a 5th gen.