Unable to create server pool, cant locate server pool file system

Hi,
While creating a server pool, I'm unable to select a physical disk for the server pool file system. I have a Fiber channel 20 GB LUN presented to 2 hosts and on both, the disks are seen. However when creating the server pool, no physical disks show up under "location", not even the local storage. Are there any logs that I can check to see whats going on?
Thanks

I was able to "resolve" this. I unassigned the LUNs, deleted them on the array and represented new LUNs and that worked. Looks like if there is an existing file system on the LUN, it will not create a repository. Only wish there was a warning message to indicate the same

Similar Messages

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

    I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
    I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

    Look in your Home > Music folder.  There should be an iTunes folder there and it should have a number of files and folders including one called library.itl  You want to guide iTunes to that file.  If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

  • Itunes library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder

    itunes library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder, I keep getting this message everytime I try to install Itunes after having to remove windows 8.1 and go back to windows 8.  I have uninstalled and reinstalled and it keeps telling me the same thing. What do I do?

    Hi Renee31,
    If you are having issues with the library.itl file in iTunes, you may find the following articles helpful:
    iTunes: What are the iTunes library files?
    http://support.apple.com/kb/ht1660
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    - Brenden

  • TS1717 iTunes will not open.  I get a message that says, "The iTunes Library.itl file cannot be found or created.  The default location for this file is in the "iTunes" folder in the music folder."  How can I fixt this?

    iTunes will not open.  I get a message that says, "The iTunes Library.itl file cannot be found or created.  The default location for this file is in the "iTunes" folder in the music folder".  How can I fix this?

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. PLEASE HELP!!!

    I have been trying for over 2 weeks now trying to get my iTunes to open up so I can use my iTunes but I have not had any luck since I up graded to the new itunes. I have tried uninstalling (all apple programs) and reinstalling and nothing seems to work. Everytime I try to open my iTunes I receive the following message - The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. Please help as I'm getting very frustrated and want to throw every apple device in the trash!!!
    FYI: I thought about getting the iPhone but since I"m not having very good luck getting assistance with my iPod/iTunes I think I will rethink my decision.

    Found the solution.

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created.  The default location for this file is in the "iTunes" folder in the "Music" folder.  Any ideas?

    I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created.  The default location for this file is in the "iTunes" folder in the "Music" folder.  Any ideas?

    Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
    Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
    Operating System
    Default location of iTunes library
    Microsoft Windows XP
    \Documents and Settings\[your username]\My Documents\My Music\iTunes\
    Microsoft Windows Vista
    \Users\[your username]\Music\iTunes\
    Microsoft Windows 7
    \Users\[your username]\My Music\iTunes\
    ... and open the iTunes library you find in there.

  • I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder.

    I keep getting the following message The iTunes library cannot be found or created. The default location for this file is in the iTunes folder in the music folder. All of my playlists have disappeared and I am trying to recover them however I now can't even open iTunes!

    Hi crazymaiden,
    I have two articles for you here that should be able to help you troubleshoot this issue with your ability to launch iTunes:
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/HT2311
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • TS3494 my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder.

    my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. i dont know what to do i need my itunes back

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • I want the location of the file system in SharePoint.

    Hi All,
    In SharePoint some files are stored in file systems and some files are stored in content data base.
    Now i want the location of the file system in SharePoint.
    Thanks in advance.

    Hi Anil,
    In SharePoint 2010 files are stored at
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14. This directory represents core SharePoint files
    Below link will help understand the14 hive structure in SharePoint 2010
    http://www.learningsharepoint.com/2010/06/07/14-hive-and-other-sharepoint-2010-directories/
    http://mysharepointwork.blogspot.in/2010/02/sharepoint-14-hive-directory-structure.html
    Thanks
     Somnath Matere

  • Error OAB-90061 unable to create connection to the remote server

    hello
    i have a problem with introspection: i want to introspect wls.
    i installed wls on a virtual machine. zip archive, no installer.
    i also installed ovab on my local virtual machine.
    start ovab, conect to serverpool: ok. now i want to start a introspection. but i got only an error:
    INTROSPECTION STARTED for: juriwls
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Creating local assemblybuilder.zip.
    Local assemblybuilder.zip created.
    Copying assemblybuilder.zip to remote machine.
    Copy at 10%
    Copy at 20%
    Copy at 30%
    Copy at 40%
    Copy at 50%
    Copy at 60%
    Copy at 70%
    Copy at 80%
    Copy at 90%
    Copy at 100%
    Copy of assemblybuilder.zip complete.
    Copying support scripts
    Copy of support scripts complete
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Introspection failed
    Error: Error initializing the remote connection.
    Caused by: OAB-90061: Unable to create connection to remote server
    Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
    Action:
    Double click on the failed node for detail
    ok may the interfaces are down: checked, ok. static ip
    tied to ping each other: no problem.
    nslookup: everything perfect.
    firewall off on each machine!
    wls is started and in runnig mode!
    variables set in .bashrc
    so i dont know what to do. anybody else?
    thanks in advance

    thanks for help
    in cli i entered: system-config-securitylevel-tui quiet port=http --port=ssh
    well done introspection starts ... but after a while another error occurs
    INTROSPECTION STARTED for: juri
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Introspection failed
    Error: Error initializing the remote connection.
    Caused by: OAB-90061: Unable to create connection to remote server
    Cause: Timed out trying to connect to IPV4 and IPV6 sockets.
    Action:
    Double click on the failed node for details.
    INTROSPECTION STARTED for: juri
    - remote ExecutionContext created...
    Copy AssemblyBuilder to remote machine.
    Copy of AssemblyBuilder is complete.
    Start remote AssemblyBuilder.
    Remote AssemblyBuilder is started and connected.
    - START SUBMIT...
    - END SUBMIT...
    onProgress<juri>: started WLS dehydration (expect delays during domain template creation)
    onProgress<juri>: started processing WLS configuration
    onProgress<juri>: creating appliances for the servers in the domain
    onProgress<juri>: Processor: 0 completed
    onProgress<juri>: capturing application deployment plans
    onProgress<juri>: determining the list of application deployments
    onProgress<juri>: building target map
    onProgress<juri>: Processor: 1 completed
    onProgress<juri>: capturing cluster configuration
    onProgress<juri>: building list of all clusters
    onProgress<juri>: building cluster sub-assemblies
    onProgress<juri>: Processor: 2 completed
    onProgress<juri>: capturing Coherence Java option configuration
    onProgress<juri>: processing setDomainEnv.sh
    onProgress<juri>: processing config.xml
    onProgress<juri>: adding rehydration scripts
    onProgress<juri>: Processor: 3 completed
    onProgress<juri>: creating package definition for domain
    onProgress<juri>: Processor: 4 completed
    onProgress<juri>: processing inputs/outputs
    onProgress<juri>: Processor: 5 completed
    onProgress<juri>: capturing data source configuration
    onProgress<juri>: Processor: 6 completed
    onProgress<juri>: start jms message bridge processing
    onProgress<juri>: Processor: 7 completed
    onProgress<juri>: start ldap processing
    onProgress<juri>: Processor: 8 completed
    onProgress<juri>: start listen address processing
    onProgress<juri>: Processor: 9 completed
    onProgress<juri>: capturing node manager configuration
    onProgress<juri>: Processor: 10 completed
    onProgress<juri>: capturing oracle home
    onProgress<juri>: Processor: 11 completed
    onProgress<juri>: validating truststore configuration
    onProgress<juri>: server truststore configuration is valid
    onProgress<juri>: Processor: 12 completed
    onProgress<juri>: processing foreign jms connections
    onProgress<juri>: Processor: 13 completed
    onProgress<juri>: setting resource requirements
    onProgress<juri>: Processor: 14 completed
    onProgress<juri>: Processor: 15 completed
    onProgress<juri>: creating appliance connections
    onProgress<juri>: no managed servers found, nothing to do
    onProgress<juri>: Processor: 16 completed
    onProgress<juri>: capturing BAM configuration
    onProgress<juri>: processing BAM managed server specific configuration files
    onProgress<juri>: Processor: 17 completed
    onProgress<juri>: authenticating admin credentials
    onProgress<juri>: admin credentials authenticated
    onProgress<juri>: Processor: 18 completed
    onProgress<juri>: exporting security configuration
    onProgress<juri>: Processor: 19 completed
    onProgress<juri>: capturing file store configuration
    onProgress<juri>: Processor: 20 completed
    onProgress<juri>: adding ready metric data to appliance
    onProgress<juri>: Processor: 21 completed
    onProgress<juri>: adding contentdata to appliances+
    onProgress<juri>: creating common resources
    onProgress<juri>: adding admin server resources to appliance AdminServer
    onProgress<juri>: adding appliance resources
    onProgress<juri>: Processor: 22 completed
    INTROSPECTION DONE for: juri
    Introspection failed
    Error: OAB-50002: Failed to create assembly for WLS domain.
    Caused by: OAB-50042: Domain template creation failed.
    Action: Check /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18246.out and /tmp/abRemote_oracle/ab_home/tmp/createDomainTemplate18247.log for details. These log files will be on the remote system if this is a remote introspection. This problem must be resolved before introspection can succeed.
    ok lets check these log files: cat on these logs.
    these logs are EMPTY!!!
    i dont know what to do now ...

  • Cant open itunes, gives error message, cant locate my music file

    as above. i installed a new hdd and my music is now on there, on opening itunes i just get a window saying itunes is unable to locate or create the itunes folder located in my music. file is in there. followed a suggestion that i rename the file path in itunes bin file to new drive name using a text editor, no joy, uninstalled and loaded latest itunes and still the same. windows has sp2 and all updates. any ideas????

    no its a new internal hdd, though the fix may be the same? cant see why it would be different both run through the mobo just different conectors and a hdd with no operating system installed, which i,m guessing is the reason itunes cant find my music in windows on the c drive, cos it aint there!!!

  • Unable to create a business service from a jca file

    I have taken a jca file of a file adapter from Oracle JDeveloper and I am trying to create a business service though eclipse for OSB.
    But I am unable to create a business service as the jca protocol is NOT available in the "Transport Configuration" section of a business service.
    I have got OSB 11.1.1.3 and wls 10.3.3.0 installed along with the corresponding integrated eclipse(oepe_11gR1PS2).
    Pls suggest!

    Refer this for the solution
    Business service NOT getting configured from jca file in Windows 7

  • I need help every time my iTunes library updates i get this error messege: The iTunes.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. but the file should be there.

    Every time I have to upgrade iTunes it gives me this messege:'The default location for this file is in the "iTunes" folder in the "Music" folder.' the file should be there but I don't understand why it does this every time Apple upgrades the Itunes library. Its on the computer somewhere but it only affects this login on my computer (meaning on this Windows Account). Why does my iTunes do this? Then I have to spend hours placing all my libraries back together and all my music back into the library. Which usually takes me a few days to sort all out. What is wrong with my iTunes? The iTunes folder is a folder in my Music folder where I store the iTunes music/files/libraries at on my computer so I can have all of the iTunes files in one place on my computer.

    I have a Windows 7 operating system my computer runs from.

Maybe you are looking for

  • My custom PhotoBooth backgrounds won't "stick"

    I have added my own backgrounds into PhotoBooth using a variety of methods, and some of them are not appearing the next time I start PhotoBooth. Here is the breakdown of how the backgrounds were added, and what the results are: PIC 1- Taken in PhotoB

  • Batch field truncation-- affecting interactive screen msc3n as 'No batch'.

    I have batch field in my ALV interactive report.  batch field I declared as database table's  batch field which is char 10. But when it is displayed in ALV output,1) .  it has truncated the leading zeros. So , when the user clicks on the batch(as the

  • Design time support

    Swing has good design time support and standardization how to build visual designers (and an example Bean Builder application), what is the situation for JSF ?

  • Why am i getting error message: 'download error tap to retry'

    I have a number of podcasts that automatically download from Radio 4.  All of a sudden nothing is downloading.  I have deleted some of my saved programmes in case it was a memory issue, but this has made no difference.

  • Problem with loading images in flash

    Hi all, I am new to flash. How can we get .jpeg/.gif/.swf files present in server onto the stage dynamically? Reply me as soon as possible.... It's urgent..... Thanks in advance... Srihari.Ch