Unable to Create Service Request Template in CRM

Hello,
I need to create a service request template in crm web ui,
Following are the steps followed.
I have identified the transaction type as SRQT screen shot attached below
However when I click on on the work center link groups of the service pro role, I am not able to find the same for the service request template
As per the post below it says that you need to go navigation bar profile and add the SM-SUPPORT work center and the work center link group as SM-SRQT-CR
How to customize service request templates
The error appears when I try to add the logical link id,
Because of the above error I am not able to create service request template in sap crm, please advice which logical link ID, I need to use so that the service request template can be created in the system.
Kind Regards
Atul

Hi Atul,
1. Screen shot 1 is correct
2. Screen shot 2 - You are at end of all work centers in your custom role which you might have copied from standard or Z role. If you look in standard role SERVICEPRO, navigation bar profile SRV-PRO, work center - SRV-ORD, you will find service request template
In Cases work Center in standard SERVICEPRO role you can create service request template.
Try copying this to your custom role in your required work center. It should work.
Regards,
Niraj

Similar Messages

  • Not able to create service requests in E-Service

    HI all,
    I am unable to create service requests in the e-service scenario, after i enter all the data and press save button, it says that number is null.
    There is no dump in the crm system.
    I am able to create the same service request in CRM system and also can see these transactions in search list of e-service, but cant view them.
    its giving an error message "An error occurred. The action that you requested could not be performed"
    Regards,
    Karunakar.

    When i tried through DBCA it hanged...
    through oradim it the posted error was appearing
    I have all the privileges as i logged in as domain admin.
    Oradim says it cannot create but the service has been created in services.msc but when i start the service the posted error message was appearing on the Eventlog

  • How to Create Service request to notify the customer

    Hi All,
    Could u please tell me the which function module is used for  Create Service request to (SAP-CRM) notify the customer

    Hi Prajit,
    I have an assignment to create customized service request, for submitting user access request by using service desk, this template which i need to create different from the Standered one, which created by SMRQ (i guess).
    As far as i know from diff forum, when we submit an request order, internally system create service request for each approved item line.
    My requirement to just create below request (template), so user can submit access request by using Solman service desk (service request).
    Please help me.

  • Problem in opening 'Find Service Request' and 'Create Service Request' HTML forms

    Hi,
    I  am working on creating some date for EBS Service, and I am unable to open 'Find Service Request' and 'Create Service Request' HTML forms.
    I keep getting the error message :
    Oracle error - 20001: ORA-20001: APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option. has been detected in MO_GLOBAL_INIT.
    I have min knowledge of EBS set up and configuration. We just use EBS as a source system for our ETLs.  Please suggest any workaround to get resolve the issue.
    Thanks,
    Kishore

    Navigate to System Administrator responsibility > Profile > System. Search for the profile MO: Operating Unit and under responsibility field, put in the responsibility name you are using for creating the service request, click OK and enter the desired operating unit value in the next window. It pulls up all operating units defined and you can chose the desired one.
    Thanks
    Shree

  • Activity Templates inside Service Request Templates

    I have run into a problem and I was hoping there is an easy solution.
    I have built Activity Templates for Access Requests, one template per application.
    Then I have Service Requests for per Job Code, which include up to 20 of those Activity Templates.
    I did it this way specifically so if an Application Access process changed, I could just edit the Activity Template for that Application, and all the Service Requests that use that template would update as well.... or so you would think.
    I just had to change some, and my service request is still showing the old templates, not the esits I did. I waited over an hour. Is this a workflow problem, or a functionality problem? If the Service Request Template saves when created instead of pullign
    the activity templates each time its opened, it defeats my purpose of trying to do this modularly. This also makes absolutely no sense to me either, if that is in effect how it works.
    What that will mean is I will have to edit every service request that uses a specific activity, instead of just that activity template.

    Activity templates do not cascade. When you add an activity template to a Service Request, SCSM creates a copy of the activity template _inside_ the SR template. That's where they diverge.
    Any further changes to the original activity template will not be replicated to any SRs that contain that activity.
    I'm sorry to say that's the way SCSM's template management was implemented.

  • WSW0100: Unable to create Service

    Hi,
    I am trying to access a webservice(Location.jws) via a dataservice function(GetLocationResponse.ds)
    The primary objective of the webservice is to post a request to GlobalLocate, a location provider and obtain the user's location co-ordinates.
    On the test browser, I am able to test the webservice both by Test form and Text XML successfully.
    I have created GetLocationResponse.ds as explained in Chp 9 of Sample tutorial 1.
    However, when I execute the GetLocationResponse.ds in testview of DSP for the first time it works fine.
    On subsequent execution,I am encountering the following errors:
    com.bea.ld.wrappers.ws.exceptions.WSWrapperException: {bea-err}WSW0100: Unable to create Service {http://www.openuri.org/}Location of WSDL: http://localhost:7001/Location/controls/Location.jws?WSDL=.
         at com.bea.ld.wrappers.ws.exceptions.WSWrapperException.create(WSWrapperException.java:50)
         at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:127)
         at weblogic.xml.query.exceptions.XQueryException.create(XQueryException.java:98)
         at weblogic.xml.query.exceptions.XQueryException.raise(XQueryException.java:575)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceAdapter.createService(JAXRPCWebserviceAdapter.java:341)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceAdapter.createNativeOperator(JAXRPCWebserviceAdapter.java:211)
         at weblogic.xml.query.operators.OperatorManager.getNativeOperator(OperatorManager.java:754)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.exec(JAXRPCWebserviceIterator.java:120)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.fetchNext(JAXRPCWebserviceIterator.java:103)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.navigation.ChildPath.fetchNext(ChildPath.java:170)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.node.Data.fetchNext(Data.java:83)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.constructor.AtomicElementConstructor.fetchNext(AtomicElementConstructor.java:129)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.constructor.SuperElementConstructor.getPhase2(SuperElementConstructor.java:388)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.matEverything(PartMatElemConstructor.java:123)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.fetchNext(PartMatElemConstructor.java:197)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.constructor.SuperElementConstructor.getPhase2(SuperElementConstructor.java:388)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.fetchNext(PartMatElemConstructor.java:229)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
    Caused by: javax.xml.rpc.JAXRPCException: failed to create service
         at weblogic.webservice.core.rpc.ServiceImpl.getWebService(ServiceImpl.java:123)
         at weblogic.webservice.core.rpc.ServiceFactoryImpl.createService(ServiceFactoryImpl.java:42)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceAdapter.createService(JAXRPCWebserviceAdapter.java:298)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceAdapter.createNativeOperator(JAXRPCWebserviceAdapter.java:211)
         at weblogic.xml.query.operators.OperatorManager.getNativeOperator(OperatorManager.java:754)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.exec(JAXRPCWebserviceIterator.java:120)
         at com.bea.ld.wrappers.ws.JAXRPCWebserviceIterator.fetchNext(JAXRPCWebserviceIterator.java:103)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.navigation.ChildPath.fetchNext(ChildPath.java:170)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.node.Data.fetchNext(Data.java:83)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.constructor.AtomicElementConstructor.fetchNext(AtomicElementConstructor.java:129)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.constructor.SuperElementConstructor.getPhase2(SuperElementConstructor.java:388)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.matEverything(PartMatElemConstructor.java:123)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.fetchNext(PartMatElemConstructor.java:197)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.constructor.SuperElementConstructor.getPhase2(SuperElementConstructor.java:388)
         at weblogic.xml.query.runtime.constructor.PartMatElemConstructor.fetchNext(PartMatElemConstructor.java:229)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
         at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
         at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
         at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
         at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:238)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
         at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
         at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
    Could you please help me resolve this?
    Thanks
    Vidya

    Sounds like the webservice is not available.
    Is http://localhost:7001/Location/controls/Location.jws?WSDL= the correct URL?
    Try putting http://localhost:7001/Location/controls/Location.jws?WSDL= in a browser and seeing if you get the wsdl back.

  • Create service request with inbound email linked to it

    Hi,
    we are on CRM 7.0 and interaction center agents need to open and read inbound emails in the agent inbox and in some cases manually create Service Requests to which the email should be linked.
    Is there any standard functionality to manually create a new Service Request with the inbound email linked to it or do we have to implement it with custom coding? (we have already used ERMS to automatically create Service Requests linked to emails, but in some scenarios agents need to create manually service requests linked to mails after reading the email in the inbox)
    Thanks,
    laura.

    Hi Joaquin,
    Thank you for answering. I already tried: I select the line with the email in the Inbox, I press Interact (the account is automatically recognized and I am asked to confirm it), I confirm the account and then I navigate to "Service Request" workcenter: a new Service Request is displayed, with the employee responsible and the customer automatically filled. However, I can see no data regarding any attached email in any of the Service Request tabs (even if I save or select "End").
    After your answer, I tried the same procedure with the "Service Ticket" and noticed that the email is correctly displayed as an Interaction Record under the Business Content tab for the Service Ticket: since you confirmed that this should work also for Service Request, I guess there's something wrong in my customizing settings and now I will search for errors.
    Thanks for your help.
    Best regards,
    Laura.

  • Service Request template with status resolved

    Hi all,
    There is a way to create a Service Request template with the status "resolved"? We would like to use this kind of template in a location when we don't care about  the issues, but we need to know their number. So we just have to open a new
    SR, apply that template and close it automatically. 
    Thank you,
    Eugen

    Hi,
    If no Activities related to your Service Request it will completed automatically, If actitivities related than you must create a workflow to complete the activities first, then your SR will be completed.
    Antoine AL Ibry

  • Error when creating a request Template In OIM

    Hello all,
    I have a very strange issue with OIM, it is when I try to create a request template, and put a restriction in Organization field, it creates the template and everything is fine. Suddenly, when I try to edit this template, the OIM shows a window with the next error:
    ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
    I have found in other posts the "solution", It is to change in the database -> RequestTemplate Table -> Template Data Column, the restriction Organization from "the name of the organization" to "the Id of the organization", and restart the OIM, so after that, I can edit the template.
    Here is the issue that I don't understand,... few hours after, I want to edit the same template, and the OIM again shows the same error:
    ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
    And if I review in the database the table, in the Template Data Column, the restriction of Organization has AGAIN the "Name of the organization".
    And I can again change that to the "Id of the organization", but it's time lost restarting the OIM. Time that I don't have, because Its more than one template.
    Please somebody could help me with this issue.

    Hello,
    I already found the solution to this issue.
    I had to restart the OIM server but also the DataBase and after that, this problem was solved.
    Thanks anyway.

  • Unable to create a request in CUP

    Hi All,
    We are unable to create a request in CUP 5.3.We have created the "Number Range" and it is activated. Workflow path is looking fine.
    The strange thing is I am not getting any error message after submitting the request.
    Please let me know the possible causes of this.
    Regards,
    Rakesh Narne

    Rakesh,
       What message do you get? There has to be some message. If you are not receiving any message then you might not have uploaded the .xml files into CUP. CUP comes with some initial data in the form of xml files and you need to import these files into CUP before using the tool.
    Without error message or some kind of long information, we won't be able to help you.
    Regards,
    Alpesh

  • CRM_ORDER_MAINTAIN - Create Service Request using IT_SERVICE_OS

    Hi,
    I am using CRM_ORDER_MAINTAIN to create Service requests. To enter the Category (1 to 3) fields I am using the parameter IT_SERVICE_OS. But somehow it is not working. The Service request has been created but the Category is missing. The code used is given below. Please let me know where I am wrong.
        lw_subject-ref_handle   = 1.
        lw_subject-ref_handle_h = 1.
        lw_subject-katalogart = 'C'.
        lw_subject-codegruppe = 'ZSRCAT'.
        lw_subject-code       = 'LD02'.
        lw_subject-katalog_type = 'D'.
        CALL FUNCTION 'CRM_INTLAY_GET_HANDLE'
          IMPORTING
            ev_handle = lw_subject-ref_handle.
        lw_subject-mode       = gc_mode-create.
        INSERT lw_subject INTO TABLE lt_subject .
        CLEAR lw_osset.
        lw_osset-ref_handle      = 1.
        lw_osset-subject_profile = 'ZHRSERV'.
        lw_osset-profile_type    = 'A'.
        CALL FUNCTION 'CRM_SERVICE_OS_SET_DATA'
          EXPORTING
            is_srv_osset_com   = lw_osset
            iv_ref_handle      = lw_osset-ref_handle
            iv_ref_kind        = gc_object_ref_kind-orderadm_h
            it_srv_subject_com = lt_subject
          EXCEPTIONS
            error_occurred     = 1
            invalid_guid       = 2
            no_record_exist    = 3
            OTHERS             = 4.
        CALL FUNCTION 'CRM_SERVICE_OS_PUT_DATA'
          IMPORTING
            et_srv_osset_com = lt_service_os
            et_input_fields  = lt_input_fields_f.
        APPEND LINES OF lt_service_os TO gt_service_os.
        INSERT LINES OF lt_input_fields_f INTO TABLE gt_input_fields.
        CALL FUNCTION 'CRM_INTLAY_CLEAR_HANDLE'.
    Thanks
    Vinod

    Hi Vinod,
    In CRM4, I use something similiar to update categories through subject code.
    Something like this:
    *- Subject code create
    *- Get Subject profile
    CLEAR: ls_input_field_names, ls_input_field.
    CALL FUNCTION 'CRM_ORDER_SERVICE_H_SELECT_CB'
      EXPORTING
        iv_process_type = iv_process_type
      IMPORTING
        es_service_h    = ls_service_h
      EXCEPTIONS
        entry_not_found = 1
        OTHERS          = 2.
    *- Subject data
    ls_subject-ref_handle = gv_handle.
    ls_subject-katalogart = iv_katalogart.
    ls_subject-codegruppe = iv_codegruppe.
    ls_subject-code = iv_code.
    ls_subject-mode = 'A'.
    APPEND ls_subject TO lt_subject.
    *- Osset data
    ls_osset-ref_handle = gv_handle + 1.
    ls_osset-subject = lt_subject.
    ls_osset-subject_profile = ls_service_h-subject_profile.
    ls_osset-profile_type = 'A'.
    APPEND ls_osset TO ls_service_os-osset.
    *- Service OS data
    ls_service_os-ref_handle = gv_handle.
    ls_service_os-ref_kind = 'A'.
    APPEND ls_service_os TO gt_service_os.
    *- Input fields
    ls_input_field-ref_handle = gv_handle.
    ls_input_field-ref_kind  = gc_object_kind-orderadm_h.
    ls_input_field-objectname  = gc_object_name-service_os.
    ls_input_field_names-fieldname = 'CODE'.
    INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
    ls_input_field_names-fieldname = 'CODEGRUPPE'.
    INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
    ls_input_field_names-fieldname = 'KATALOGART'.
    INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
    INSERT ls_input_field  INTO TABLE  gt_input_fields.
    It works for me. Check if may help you a little more.
    Kind regards,
    Garcia

  • Using emails to create service requests in Service Manager 2012 R2

    I have a portal form created and am able to direct the flow of service requests to the proper service request fulfillment view. I cannot see an obvious way to take in emails and create service requests, they always create incident requests. Any thoughts?

    Service requests are meant to be a well defined process which is hard to achive with an email (because the sender can write anything). With that being said the
    3.0 RTM exchange connector should be able to create service requests.  From the documentation:
    Service Manager. Exchange Connector 3.0 contains bug fixes and the initial set of features, which includes the following capabilities:
    Create incidents and service requests from email.
    http://codebeaver.blogspot.dk/

  • GOS: create attachment sent by PI while creating Service Request Notificati

    Hi Friends,
    I am developing a custom FM which creates Service Request Notification(QMEL). 
    This FM will be called by PI with data using web services and gets back the results after execution of function module.
    PI receives the attachments also from the other systems which should be sending to ECC to create the attachments also.
    PI sends Filename, file type, file data text or binary which will be sent to FM to an internal table..
    I am trying to use the internal table data to create attachments in the FM. I am stuck here.
    Are there any thoughts how I should get data from PI to ECC to achieve the functionality??
    I appreciate if anyone gives me an idea how to proceed?
    Regards,
    Satya Denduluri.

    Hi,
    did you try business object SOFM ( transaction SWO1 ) ? It offers a lot of methods around attachments, documents.
    Regards
    Dirk

  • GOS: create attachment sent by PI while creating Service Request

    Hi Friends,
    I am developing a custom FM which creates Service Request Notification(QMEL).
    This FM will be called by PI with data using web services and gets back the results after execution of function module.
    PI receives the attachments also from the other systems which should be sending to ECC to create the attachments also.
    PI sends Filename, file type, file data text or binary which will be sent to FM to an internal table..
    I am trying to use the internal table data to create attachments in the FM. I am stuck here.
    Are there any thoughts how I should get data from PI to ECC to achieve the functionality??
    I appreciate if anyone gives me an idea how to proceed?
    Regards,
    Satya Denduluri.
    GOS: create attachment sent by PI while creating Service Request

    Hi,
    did you try business object SOFM ( transaction SWO1 ) ? It offers a lot of methods around attachments, documents.
    Regards
    Dirk

  • How to create Service Requests(SR's) from customer/user mails.

    Looking for "how to enable the feature of creating Service Requests (SR's) in tele Service Module based on the information
    in E-mail coming from Customers/users" in 11.5.10.2 E-Business Suite.
    Any reference notes/pointers is appreciated.

    I think you should have to setup email center..
    Just go through the implementation guide...to get some idea about it..
    Thanks

Maybe you are looking for

  • How to move CRM_UI_FRAME component from one box to another box

    Hi All, Need help about this task. Background: - CRM Dev Box - CRM QC Box - CRM Prod Box Problem: - CRM_UI_FRAME component on the QC Box is not working properly. When we are going to the BSP Workbench, an error comes out that there is an unclosed tag

  • Dual booting S540 and linux with Secure Boot?

    At some point I intend to install archlinux with dual boot on my Thinkpad S540 which currently runs Windows 8.1. All the current advice about dual boot on UEFI machines seems to indicate that the way to go is to disable Secure Boot (and Fastboot) for

  • Print presets not saving

    I never got very good results from printing in Aperture 2, but Aperture 3 seems to have fixed most of my outstanding issues. So I was trying to set up some print presets. Unfortunately, I create a new preset, select Save Preset from the gear menu and

  • MIGO output determination

    Hello MM Gurus, What is the function of CONDITION RECORDS and ACCESS SEQUENCE for output determination in IM level. Secondly I am trying to define a new output type for label in Tcode NACE . Can you explain me in detail what are the steps I have to c

  • My title and author name doesn't show in the preview on the bookshelve?

    An earlier post said I could share/exit as epub and that would fix the problem, but that function is not there anymore? The title and author was there in the beginning of my project but suddenly it has disappeared? What can be the problem? Hope you c