Unable to create Sites/Subscriptions in SMOEAC

Hi,
I am trying to create sites in SMOEAC. Unfortunately I cannot create anything else than Organizations. The upper left box where I choose Object Type is in fact blank. No Visual Display at all.
My authorizations are according to the notes :
SAP_CRM_MWAC_ADMINISTRATOR
SAP_CRM_MWAC_CUSTOMIZER
SAP_CRM_MWAC_DISPLAY_ALL
I have used SAP Note 485656; but to no avail.
Any other suggestions??
Thanks,
Mylène

Hi Mylène,
Which CRM are you on? Looks like an authorization issue. Why dont you first try with better authorizations, for e.g. SAP_ALL and SAP_NEW? If you should be able to create with these authorizations, then troubleshoot further on authorizations.
Reward if helps
Regards,
Paul Kondaveeti

Similar Messages

Unable to create site hierarchy for any variation label

I am unable to create a site hierarchy for our source variation and any subsequent variation labels we setup. The error when trying to do so is:
“An error was encountered performing this operation.
You may re-try the operation, and you may need to clean up the half-created data first before re-trying. If the problem persists, please contact your system administrator. “
We have a test farm which didn't have this problem.
Any help gratefully received.

Thanks Mark. I'll certainly give that a try. But today I started digging into the SharePoint Logs and found this entry:
10/01/2007 11:42:59.28 w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception An unhandled exception has occurred. Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'. System.InvalidCastException: Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'.     at Microsoft.SharePoint.Publishing.PublishingPage.FixWebPartUrlsForVariation()     at Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.CreateVariantPage(PublishingPage sourcePage, PublishingWeb targetArea, String destPageWebRelativeUrl, String pageLayoutName, String title, String description, Boolean copyResources, Boolean enforceMajorVersion, SPWeb& webToClose)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationInner(VariationLabel varla...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...bel, String pageLayoutName, String destPageName, String title, String description, Boolean copyResources, Boolean overrideStopUpdate, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, Boolean stopAutoSpawnAfterDelete, Boolean sendNotificationEmail, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationAuto(VariationSettings variationSettings, VariationLabel varlabel, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeepForChildren(VariationSettings variationSettings, PublishingWeb sourceParentPubWeb, VariationLabel varlabel, Boolean isCrea...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...teHierarchies, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeep(VariationSettings variationSettings, ReadOnlyCollection`1 varLabels, Boolean isCreateHierarchies, Boolean recurse, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.VariationSettings.CreateHierarchies(LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.CreateVariationHierarchies()     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.DoWork()     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__11()     at Microsoft.Office.Server.Diagnostics.Fir...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...stChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowException, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__f()     at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowExcep...
10/01/2007 11:42:59.28* w3wp.exe (0x1240)                       0x17FC Windows SharePoint Services   Runtime                       8yr8 Exception ...tion, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.ThreadEntryPoint()     at System.Threading.ThreadHelper.ThreadStart_Context(Object state)     at System.Threading.ExecutionContext.runTryCode(Object userData)     at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)     at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ThreadHelper.ThreadStart()
This exception totally amazes me because I thought from WSS 3.0/MOSS 2007 onwards all Web Parts could be derived from System.Web.UI.WebControls.WebParts.WebPart. So does this mean I will have to change all of them?
Did you run into anything similar?
Thanks.

Unable to Create site collections with any template

Hi All,
We are using SharePoint 2013 , after long time am tried for create new BI center in one of our web application , but its taking more then 10 mints , the page is loading more then 10 mints , after that i just refresh the page and i got a error "Sorry
this site was created already with this name".
so , i try to enter the new site URL am getting error the page is not valid .
i thought this was on issue with requirements on BI Center , so i checked the web application associated service application , but i have Visio Graphics service application , Excel Service Application and Performance point service application running for
this web application .
after some time i tried to create team site template site collection , i am facing the same issue again , i really dont know what is the issue with my CA , can any one help me to solve this issue ASAP.
i tried to create site collection from PowerShell also , but am facing the same issue , even i got the same error while try to create sub site. i tried with refreshing IIS also , but its not worked.
Am waiting for your valuable response .
Thanks,
Mani L
Mani L

Hello Mani L,
Please make a host entry on you WFE server for the URL of the site you are trying to create. Then try browsing the site from same server.
- First check if the binding is correctly configure in Alternate Access mapping on Central administration
- Same binding should be provided under IIS for the web application
If this doesn't resolve the issue then, for testing create a host entry for central admin hostheader url.
To do this follow below mentioned steps:
Go to Start -> Run -> Type drivers
open HOSTS file in a notepad
type IP address of the APP server and beside that with a tab key type URL of the site
Save the file and try to browse the site in a fresh new browser after closing all the browser.
Where SharePoint.com is my Host Header URL and IP address is the server IP where the site is hosted (APP Server generally)
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Creating site collection in claims enabled webapplication with each in seperate content database

Hi All,
We have a requirement where end user have a option to create site collection with out contacting farm admin, and each site collection would be created in separate content db.
we used WebApplication.sites.add() which is working only for classic authentication web applications.
how do we create site collections in claims enable web application with each site in separate content db?
Any thoughts on this would be helpful.
ragava_28

Hi,
We can use Self Service Site Creation to achieve your requirement.
The code snippet below for your reference:
using (var site = rootSite.SelfServiceCreateSite(siteCollectionUrl, title, description, locale, null, adminLogin, adminName, adminEmail, secondaryAdminLogin, secondaryAdminName, secondaryAdminEmail))
var web = site.RootWeb;
web.AllowUnsafeUpdates = true;
//Activate web template feature
site.Features.Add(webTemplateFeatureGuid);
//Apply web Template
using (var s = new SPSite(site.ID))
var webTemplates = s.RootWeb.GetAvailableWebTemplates(locale);
var webTemplateId = "{" + webTemplateFeatureGuid.ToString() + "}#" + webTemplateName;
var webTemplate = webTemplates[webTemplateId];
if (webTemplate != null)
web.ApplyWebTemplate(webTemplate);
// need to reload web. Features in webtemplate have modified it!
web = site.OpenWeb(web.ServerRelativeUrl);
// Continue doing stuff to new site
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/26303/unable-to-create-site-collection-programmatically
Best Regards
Dennis Guo
TechNet Community Support

Unable to create sub site after setting up site subscription in Sharepoint Foundation 2013

Hi, All,
I have set up sit subscription in to the sharepoint. I have a Site collection which is assign to specific tenant group. I have assign sevral custom features to the tenant group. What happening now is, when I am creating a sub site, it throws an error that
specific feature(e.g CustomList feature) is not available. So I added that feature definition to tenant group. Again I tried to create sub site. Now it shows error that specific feature(this time it shows AnnouncementList feature) is not available. So I added
that feature too. Now its showing me these kinds of error continuously.
So what required is I need to add all the default features to my tenant group. Do you have idea how can I add those feature by single command instead of I add it to the tenant group one by one ?
Thanks.
Your help is appreciated.

You can use Powershell to create a Feature Pack that will add multiple features to a tenant group. Here's one for the default Foundation Features.
http://gallery.technet.microsoft.com/office/SharePoint-2013-Foundation-d3d1637f
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Unable to create a Site Content in Web Page Composer

Hi All,
I am new to WPC and would like to explore more on the same. I tried following some blogs inorder to create and publish Web Pages.
I was stuck at a point where we need to create a site content. I guess all the permissions required to access each folder is properly set.
When I tried to create a content like for example an article... A window pops up which says please select a document type and I dont have any option to select whereas I have a cancel and next button at the bottom of the screen. When I click next nothing happens.
Did anyone went through this issue? What am I doing wrong? Did I fail to set some role to the author creating content?? Author has wpc_editor_role though.
Regards,
Rekha Malavathu

Hi Sandeep,
The popup window (which I suppose is an XML Editor) doesnt have any UI Element to select when I try to create any content... may it be an Article, Linklist, etc...
I am using WAS 2004S SP 14. As I mentioned, all the xml and xsl files are available in the folder and even in the KM Configuration.
My problem is, I am unable to create a content as the popup window is blank... No UI Element to select or enter.
Regards,
Rekha Malavathu

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating multiple subscriptions for collaborative site collections under same OU in multi-tenancy

Hi,
We have an application that creates host based collaborative site collections and MySite Host site collections. We have created two separate web applications for hosting collaborative site collections and Mysite host based site collections as recommended
by MS.
For creation of collaborative site collections, we are creating separate site subscriptions for separate site collections. For example, if a tenant has two collaborative site collections as CSC1 and CSC2, then two site subscriptions are created for two CSCs
under the same tenant. The reason behind the implementation is as follows:
There is a 1:1 mapping with the featurepack and site subscription. Now if two site collections are created under the same site subscription, then altering the feature pack of any site collection will affect the other one. Whereas, if separate subscriptions
are created fro separate site collections, then altering the featurepack of any site collection will not affect the other site collections.
Now, my concern is, will the basic functionalities of SharePoint, like search, user profile, etc, will break for the above implementation. Is there any technical hazard for the above implementation.
A quick response is appreciated, as we need to deliver a customer ASAP.
Thanks in advance,
Arnab

Search and UPSA would be part of the Site Subscription, so I'm unsure as to what you're specifically asking.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Non site collection admins unable to create publishing sites

I've come across a problem which a number of other people have found and blogged about a 'fix', this is where non site collection administrators are unable to create sub sites with the publishing site templates (both with and without workflow version).
The 'fix' for this is to grant 'Restricted Read' permission to everyone on the Masterpage and DeviceChannels folders.
Does anyone know if this has been fixed properly, i.e. by Microsoft in one of the updates? I'm still going through them one by one but haven't yet found one that sorts it out.
Thanks.

Hi Simon,
I tested the same scenario per your post in my environment, and I cannot create the publishing site when I had no permission on the Device Channels list.
It seems that we need to have at least Read permission on the Device Channels list (no permission is needed on the Master Pages Gallery ), then the publishing site can be created successfully.
I checked the ULS log and found that the Device Channels list was needed to be requested when creating the publishing site. So if we have no permission on the Device Channels list, we cannot access the list and then the creation of the publishing
site will fail.
It is by design that Read permission is needed on the Device Channels list when creating the publishing site.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to Create Customer Profile at Site Level

Hello All,
I am working on R12 Customer Conversions.
As part of this, i am trying to load the customer profile amounts at levels. 1. Account Level 2. Site Level
At Account Level, When ever i create a new account defaultly a new record is creating in hz_customer_profiles for the account_id. And i am passing 'cust_account_profile_id' to the hz_customer_profile_v2pub.create_cust_profile_amt. And able to do create customer profile amounts successfully.
But
At the Site level, when ever i create a new site, its NOT creating a record in HZ_CUSTOMER_PROFILES. If it creates i can have this 'CUST_ACCOUNT_PROFILE_ID' and pass it to the API
but its not doing so.
Could you please tell is there any setup for Creating HZ_CUSTOMER_PROFILES while creating SITE Use.
Please help me in this.
Thank you,
Aush

Hi Aush,
There is not specific setup for the same. You might not using the APIs correctly. Did you use hz_cust_account_site_v2pub.create_cust_acct_site API to create site? Once you create the site, you need to defined the site use using api, hz_cust_account_site_v2pub.create_cust_site_use. This Site use api will insert the record into HZ_CUSTOMER_PROFILES for the site record.
Once you create the site use, then you can define the profile amount using hz_customer_profile_v2pub.create_cust_profile_am API. Hope this is helps you.
- Kiran

Unable to configure site mailbox at the sub site level and new site collections created

hi all,
i am trying to get the site mailbox up in my SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and what are the steps i needed to perform on exchange server level.

hi all,
i am trying to get the site mailbox up in my SP 2013 env's sub sites and site collections.
i am able to get the site mailbox created on root site collection level ONLY.
but i am getting the error code 8 when i try to add the site mail box at the sub site level and the newly created site collections on the same web appln.
error code 8:
An error occurred during the OAuth handshake between SharePoint and Exchange. This is typically caused by server to server configuration issues, such as a realm value mismatch on either side, certificate issues for Exchange or SharePoint, etc. Review certificates
and attempt to establish or reestablish trust.
so is it possible to create site mailbox at the sub site level [ team site] ?
and what are the steps i needed to perform on exchange server level.

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

Unable to load Site Control File

Hello,
The background :
I am in the process of learning how to create a Management Pack for a distributed application in SCOM 2012 R2.</p><p>For this, I picked our SCCM Site server to use as an example. So, in short, am writing a management pack for SCCM 2007 Discovery.
I know a management pack might already exist. I am trying to learn by using an architecture I'm familiar with so I need to create this from scratch.
In order to discover SCCM Site installed on a server, I decided to use the SMS WMI namespace. By reading the
SMS_ProviderLocation Instance, I am able to detect if the server has SCCM Site installed on it.
My next step was to find out where the SMS database is hosted. I found
ROOT\SMS\site_ABC\ namespace contains an instance of SMS_SCI_SiteDefinition where I can find the database name and server name which I can use to discover the other components of a distributed application.
The problem :
When I run the query Select * from SMS_SCI_SiteDefinition I get a generic error 0x80041001.
More Information reveals the following:
error description : " Unable to load site control file "
error code : " 2160198400 (0x80c20300) "
file name : " c:\qfe\nts_sms_fre\sms\siteserver\sdk_provider\smsprov\sspsitecontrolextractor.cpp "
Now, I cannot find the QFE folder anywhere. The SCCM Site is working fine and the site_control_manager component has no errors. I can launch the SCCM console on that server without any errors and the site status messages do not contain any errors.
Can someone please help me out with "detecting" an installed instance of SCCM site server using WMI? Is the above error cause for worry for the SCCM part of my brain?
Thanks in advance for your guidance!

Thanks for your response Don!
The SMS_Site instance does not provide information of the database server and database name.
The funny thing is when I browse use wbemtest to connect to root\SMS\site_XXX and enumerate classes, i do not find
the SMS_SCI_SiteDefinition.
I find it when i enumerate recursively and can browse into the values. I'm not sure how could build a query against this now.
Can anybody with a test instance of SCCM 2007 check this and let me know please?
Everything you are looking for exist within WMI. You can use the documentation script as an example to get what you are looking for.
http://www.enhansoft.com/pages/downloads.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Unable to create database error

Hello all-
I've been working on a project in Robohelp7/HTML for about a
week. I come in today and try to open my project and receive the
error "Unable to create database. Check that the directory is not
read-only.". I've done the obvious of checking the folders and
files within and they are not marked read only. When I create a new
project, I receive the same error. I'm stuck at a standstill and
can't figure out why Robohelp has decided to deny me access to my
project or the ability to create new ones. I went so far as to
uninstall and reinstall, to no avail.
Has anyone encountered this? Any help would be greatly
appreciated.
Thanks

There is a topic on Opening RoboHelp Projects on my site. Rh allows you to browse to either an XPJ or HHP file but that is only as good as the last time you generated an output.
When you open with an HHP you get an option to use the XPJ or not, in which case one is created. Either way there should be an XPJ. Not sure how you have lost it.
Backup?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to create Sites/Subscriptions in SMOEAC

Similar Messages

Maybe you are looking for