Unable to create socket for ExamplesServer

I followed the manual on how to run the sample jsp programs with Weblogic. The manual says that the Weblogic server should be started first and the succeeding steps, somehow repeats that we should start the examplesServer as well. So did that even if the default app server is already running which is using port 7001 already. So as I expected, I got this error when running the examplesServer:
<Aug 8, 2002 6:32:39 AM MDT> <Emergency> <WebLogicServer> <Unable to create a se
rver socket for port: 7001. java.net.BindException: Address in use: JVM_Bind Per
haps another process is using port 7001.>
Please advise on how to properly run the sample server. Please note that with just the default server running, when I enter the url for the examplesServer on my IE browser, I get this error:
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

Are you sure that there is a server process listening on that port number? I think you will get a "Connection refused" message if there is no sever listening on the port you are trying to open. Have a look at ServerSocket

Similar Messages

  • Error: Unable to create socket(While using Mail Adapter in receiver side)

    Hi Experts,
    I have tried the File to Mail scenario. While component monitoring the Sender communication is working fine but the receiver communication is giving error like Unable to create socket. Please help me to solve this error.
    Regards,
    Nutan

    HI,
    before using the mail adapter have you specified all the attributes porperly as well as have setup the SMTP Exchange Server address
    For FAQs about the mail adapter, see SAP Note 856599.
    Please read the below thread, it might be helpful/
    SOAP Receiver   java.io.IOException: unable to create a socket
    Thanks
    Swarup

  • 2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

    Deployed four 2960X switches in a stack.  All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page.  I assumed this was a browser error.  So tried Chrome then IE which both failed.  Chrome was a bad display and IE fails to connect.
    After this, I could not telnet or ssh.  Plugged into the console and immediately started receiving:
    %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
    %% Low on memory; try again later
    I am unable to log in.  I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window.  When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command.  I don't mind disabling HTTP.
    Any suggestions?

    I am currently working with TAC
    The switches failed about 18 hours later and had to be rebooted to get back up.  Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
    SW13#sho proc mem sort | i Auth Manager
     191   0  177721332   95004616   34757416          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177754888   95025696   34759780          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177774316   95037928   34761056          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177799720   95053940   34762888          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177824976   95069732   34764696          0          0 Auth Manager
    SW13#
    SW13#
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103448576 Free:  339348260
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103454416 Free:  339342420
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103455860 Free:  339340976
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103459236 Free:  339337600
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103461040 Free:  339335796

  • Cannot export video clips.  Get message: "unable to create video for export"

    Cannot export video clips from iPhoto to Finder folder.  Export fails with message "unable to create video for export: "
    The video clips play correctly within iPhoto. 
    Software: iPhoto version 9.5 on OSX 10.9
    Hardware: Retina Macbook Pro 2.3 i7 8GB

    Yes.  I have 3,184 video clips in this library.  I tested Reveal function by randomly selecting individual video clips and in every case the Reveal in Finder function worked correctly.  I also tested this on random selections of groups of video clips and, again, the Reveal function worked correctly in every case. 
    Some more info that may be relevant:
    I have multiple iPhoto libraries.  My "main" library is very large (~30,000 files) and is located on an external hard drive (2TB WD) which is connected via USB.
    The problem reported here is occuring on that "main" library.  I have not opened any other iPhoto library since installing the new release. 
    While the File>Export function does not work, I have been able to simply copy and paste video clips from iPhoto library to a folder on Mac hard drive.  It appears that meta data is copying correctly along with the video content. 
    I am able to import these copied video clips to iMovie.  Meta data is imported along with the video content and I'm able to perform iMovie editing functions on those clips without any problems.
    In summary, the File>Export function still fails with the message "unable to create video for export."  Copying video clips and pasting them to interim folder seems to be a viable workaround enabling me to extract video clips from iPhoto for import to iMovie.  I will run additional tests to see if I can find a pattern to the video files that are being rejected by iPhoto Export function.

  • Cups - Unable to bind socket for address

    At first I must say, than CUPS is the bigger shit I have ever seen on Linux. I have configured many daemons like: Apache, Lighttpd, MySQL or dnsmasq. Everything always just work, but not CUPS. I have configured it for 15-20 times. I always need about 5-10 hours to run it, and I've never known why it started work - probably it is randomly like Windows
    Now, CUPS works fine on server, and I can print from laptop. But I've reinstalled Arch on PC. I've copied /etc/cups/ from laptop to PC, and now I can't start CUPS:
    /etc/rc.d/cups start
    :: Starting CUPS Daemon [BUSY]
    cupsd: Child exited on signal 15!
    /var/log/cups/error_log   
    I [11/Oct/2008:14:45:22 +0200] Listening to 208.69.34.132:631 (IPv4)
    I [11/Oct/2008:14:45:22 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [11/Oct/2008:14:45:22 +0200] Using default TempDir of /var/spool/cups/tmp...
    I [11/Oct/2008:14:45:22 +0200] Configured for up to 100 clients.
    I [11/Oct/2008:14:45:22 +0200] Allowing up to 100 client connections per host.
    I [11/Oct/2008:14:45:22 +0200] Using policy "default" as the default!
    I [11/Oct/2008:14:45:22 +0200] Full reload is required.
    I [11/Oct/2008:14:45:22 +0200] Loaded MIME database from '/etc/cups': 35 types, 39 filters...
    D [11/Oct/2008:14:45:22 +0200] Loading printer Domowa...
    D [11/Oct/2008:14:45:22 +0200] Loading printer tmp...
    D [11/Oct/2008:14:45:22 +0200] Discarding unused printer-stopped event...
    E [11/Oct/2008:14:45:22 +0200] Filter "foomatic-rip" for printer "tmp" not available: No such file or directory
    D [11/Oct/2008:14:45:22 +0200] Scanning /var/spool/cups for jobs...
    I [11/Oct/2008:14:45:22 +0200] Full reload complete.
    I [11/Oct/2008:14:45:22 +0200] Cleaning out old temporary files in "/var/spool/cups/tmp"...
    E [11/Oct/2008:14:45:22 +0200] Unable to bind socket for address 208.69.34.132:631 - Cannot assign requested address.
    X [11/Oct/2008:14:45:22 +0200] No Listen or Port lines were found to allow access via localhost!
    /etc/cups/cupsd.conf
    LogLevel debug
    SystemGroup sys root
    Listen localhost:631
    DefaultAuthType Basic
    I haven't any idea what it is: 208.69.34.132. It think it is in USA.
    socklist | grep 631 - clear
    Only deference between pc and laptop it's kernel - on pc I use 2.6.24

    I had the same problem.  I solved it doing 2 things.  (1) I replaced my /etc/cups/cups.conf with /etc/cups/cups.conf.default and (2) I added an acl option in the fstab.  Do a search on the forum for acl and you should see it.
    -rico

  • Genesys CTI  Driver-Unable to create Driver for GplusVoice

    I have a 8.0.0.4 and Genesys 7.5 integration. We are receiving the following error messages in our CommSessionMgr and Scomm Logs when we attempt to make a connection from Siebel to the Genesys CTI Server. There are no firewall ports blocking any traffic between Siebel and Genesys and then are on the same subnet and VLAN. Also, we can establish a basic connection to the Genesys T-Server without Siebel in place. We think that it may be a configuration issue somewhere but we are not sure where to look. I was just wondering if anyone on this board had any basic ideas to troubleshoot this issue besides looking through the log files and the Comm Drivers and Profiles section etc.
    Thanks for anyone’s help on this matter!!!
    CommSessionMgrLog:
    ServerLog     LstnObjPrivCreate     3     0004fd49499b1400:0     2009-02-19 10:31:31     Created port 49192 for Communications Session Manager
    ObjMgrLog     Error     1     00000b92499c1228:0     2009-02-19 11:10:38     (mediamgr.cpp (497)) SBL-CSR-00500: Unable to create a Driver
    SCommLog:
    SComm[02/20/2009 09:36:45:615]:ERROR:Error on invoke media manager method(StartAllDriver), input args={
    DriverProfileInfoArray = 2#2385#9#5#Voice5#Voice11#Gplus voice7#1-5I5JR15#VATaxCallCenter14#GenCommDrv.dll11#GenComm.GIF2289#2#1722#66#26#Service:UsePendingWorkmode22#Service:OCSCancelScope27#Service:KwPiProtocolVersion17#Driver:ServerPort20#Driver:RemoteTimeout18#Driver:LibraryNa .... (message is too long) ...
    LanguageCode = ENU
    }, error=7537140), msg='Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500)'
    SComm[02/20/2009 09:36:45:615]:ERROR:Failed to invoke method(StartAllDriver) at media manager, detail error = Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500)
    RSCHELLE_25165941[02/20/2009 09:36:45:615]:ERROR:Communication Agent failed on prcoessing request(StartAllDriver0, input-args={
    DriverProfileInfoArray = 2#2385#9#5#Voice5#Voice11#Gplus voice7#1-5I5JR15#VATaxCallCenter14#GenCommDrv.dll11#GenComm.GIF2289#2#1722#66#26#Service:UsePendingWorkmode22#Service:OCSCancelScope27#Service:KwPiProtocolVersion17#Driver:ServerPort20#Driver:RemoteTimeout18#Driver:LibraryNa .... (message is too long) ...
    LanguageCode = ENU
    }, errcode(7537140), errmsg(Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500))
    RSCHELLE_25165941[02/20/2009 09:36:45:615]:ERROR:Failed on invoking ClientConnect in Comm. Server Svc., err=7537140, msg=Unable to create a Driver object from driver GenCommDrv.dll with Media-Type-String Gplus voice(SBL-CSR-00500), input= ClientHost = NG00060492
    ClientIP = 10.172.20.128
    Simulate = 0
    SiebelMobileClient = 0

    Figured it out on my own

  • Unable to create account for SAPserviceEC6

    Hi,
    I have the above problem when trying to install  6.0.
    We reformat the server clean few times and still have the same error message.
    happened in step 3: Create user for SAP system,
    Log:
    INFO 2009-08-08 22:45:47.991
    Nothing to do. User privileges are an empty string.
    INFO[E] 2009-08-08 22:45:52.593
    FSL-01027  Account user="PHOENIX\SAPServiceEC6" does not exist.
    WARNING 2009-08-08 22:45:57.179
    Unable to get the name of a domain controller for domain .
    ERROR 2009-08-08 22:46:10.923
    FSL-01002  Unable to create account PHOENIX\SAPServiceEC6. HRESULT=0x80005009
    ERROR 2009-08-08 22:46:10.923
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-08-08 22:46:10.923
    FCO-00011  The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
    aditional info: We use the same installer , windows server 2008 64bit.
    Why?
    Regards,
    Andy
    Edited by: Andy Quipit Sayus on Aug 9, 2009 6:18 AM

    Hi all,
    Today I faced the similar problem and I found that it is due to I had joined in domain for my server so that the installation could not create users.
    I changed the domain to local( example : WORKGROUP) and the installation could continue. After that you can  join your server to domain again
    To whom it may be concern

  • Unable to create extension for latest Adobe Flash 14.2

    Hi. I tried to create own extension for my needs for latest Adobe Flash CC 14.2 with extension builder 3, but after exporting test extension I got error, that max installed version is 14.0
    I'm a bit confused how can I create extension for latest Adobe Flash CC?

    Solved by manually changing supported versions in manifest file
    <Host Name="FLPR" Version="[13.1,14.0]" />

  • Unable to create folders for apps on springboard

    I was successful at creating folders for one of my sons on his Ipod Touch, but my other son's Ipod won't allow me to do it. Is there a setting that needs to be turned on or off or what? With my sucessful situation, I simply held my finger on one of the apps on the springboard until they all got wiggly, and, therefore, moveable. I drag one app on top of another and was able to create a folder for the 2 (i.e., zombie games). I did the same thing on my other son's Ipod and the apps would not go on top of each other, would simply replace each other in the order they were on the springboard. I hope someone can help...

    Do both iPods have iOS 4 installed?

  • Unable to create delivery for STO between different stroage locations

    Hi,
    i created PO for STO between differen storage locations belonging to the same plant.
                 At the time creating PO iam getting warning message " Of material RM-999999, only 0 KG are available on desired     
                 date". what could be the reason?
    when iam doing vl10b, PO is displaying but when iam selecting the PO line and clicking on the background button it is not generating any delivery document number and it is not showing any errors?
    can any one help on this.

    Hi Praveen,
    While executing VL10B, you are actually planning to create outbound delivery for STO PO.
    The STO PO will be due for delivery on that date and hence PO is displayed in the transaction.
    The error message specified by you means on the due date of delivery, there is no material quantity exists at supplying storage location. This could be because no quantity exists in storage location or there could be some reservations available for available quantity or some other quantity is booked under some other outbound delivery document on or before that date.
    Check for stock on posting date via t-code MB5B and proceed accordingly.
    Hope this resolves your problem.
    -Ravi

  • Unable to create releases for Blanket PO in iProcurement -Urgent

    Hi All,
    Please clarify if we can create releases for a Blanket PO in iProcurement. If it is possible, one my customer has created a Blanket PO and it is with approved status, but not able to find the Blanket PO in iProcurement search window for creating the releases.
    If it is not possible to create releases from iProcurement, please suggest the procedure to create the releases. And also please let me know when can we query the blanket PO to find in iProcurement?
    Please share some important links on iProcurement if any.
    Regards
    Ram

    Is your Blanket Agreement approved and its terms dates current? If the BPA has expired or future dated, it will not show up in the item details on the search in iProcurement. It is very much possible to generate not only releases, but also carry them all the way to their approval. You need to define a BPA. Then create an Approved Supplier List, Sourcing Rules and Assign them to the default assignment set.
    Subsequently when the user selects an item referencing that BPA in the iProcurment and creates a requisition, the release will automatically get generated if you define the Release Method on the ASL to 'Automatic Release'. The only condition is that the Buyer on the BPA needs to have sufficient approval authority to approve the release generate out of the requisition.
    Hope this helps.
    Kind Regards

  • Unable to create WebChart for different ranges

    Actually I'm trying to create two Web Charts on single page and I have placed the chart contents (** data) into two sheets. When I tried to create chart for first range, it has got created successfully.
    But couldn't create for second range and getting some error like "Exception has been thrown by the target of an invocation".
    Range 1: Sheet1!$A$1:$B$4 - chart has got created successfully
    Range 2: Sheet2!$F$2:$G$5 - getting specified error
    Can someone help me in resolving this issue, please? Thanks!

    Hi there,
    can you give some additional information as from your question it is not really clear what exactly are you trying to achieve and what chart control are you using?
    Regards,
    Helen!

  • Unable to create Target for siebel 8.1.1 using Oracle Application Adapter

    Hi,
    I am unable to connect to siebel application using Oracle Application Adpater for weblogic server.Details are as follows
    OS - Linux x86
    Weblogic - 10.3.3
    SOA - 11.1.1.3
    Siebel - 8.1.1
    When tried to create target following error is thrown
    "Error getting targer[Siebel] - Invalid or incomplete string .(SBL- JCA - 00301)"
    Can any body help me to resolve this issue.
    Regards
    Srinivas Pusa

    Hi,
    There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
    Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • [SOLVED] defect dbus service, systemd is unable to create socket

    Hi,
    I am experiencing serious problems with systemd & dbus.
    I want to setup a gateway in a KVM VM, all was working fine till i applied my shorewall config & set to autostart (systemctl enable shorewall).
    If I reboot the machine after this step one or two times, then I get a broken dbus service.
    What I did than: reinstalled archlinux again (x86_x64) and setup same -> got issue again.
    installed arch linux as x86 and setup same -> issue again
    installed arch as x86 and configured nothing else shorewall and got this issue again after maximum of two reboots.
    i found in log:
    Feb 13 15:45:56 pactor systemd[1]: Failed to open private bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    I've checked this directory by hand and found that only /var/run is existing. /var/run/dbus is already not existing.
    logs:
    journalctl -b: http://nopaste.info/685f4c6192.html
    -be aware of systemd-logind, this needs dbus and i experience same problem with other services which require dbus as dnsmasq
    root@pactor ~]# systemctl status dbus
    dbus.service - D-Bus System Message Bus
    Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
    Active: active (running) since Mi 2013-02-13 15:45:56 CET; 9min ago
    Main PID: 169 (dbus-daemon)
    CGroup: name=systemd:/system/dbus.service
    └─169 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    [root@pactor ~]# systemctl status dbus.socket
    dbus.socket - D-Bus System Message Bus Socket
    Loaded: loaded (/usr/lib/systemd/system/dbus.socket; static)
    Active: active (running) since Mi 2013-02-13 15:45:56 CET; 9min ago
    Feb 13 15:45:56 pactor systemd[1]: Listening on D-Bus System Message Bus Socket.
    systemd-logind.service - Login Service
    Loaded: loaded (/usr/lib/systemd/system/systemd-logind.service; static)
    Active: activating (start) since Mi 2013-02-13 16:00:56 CET; 48s ago
    Docs: man:systemd-logind.service(8)
    man:logind.conf(5)
    http://www.freedesktop.org/wiki/Software/systemd/multiseat
    Main PID: 338 (systemd-logind)
    CGroup: name=systemd:/system/systemd-logind.service
    └─338 /usr/lib/systemd/systemd-logind
    Feb 13 16:00:56 pactor systemd[1]: Failed to start Login Service.
    Feb 13 16:00:56 pactor systemd[1]: Unit systemd-logind.service entered failed state
    Feb 13 16:00:56 pactor systemd[1]: systemd-logind.service holdoff time over, scheduling restart.
    Feb 13 16:00:56 pactor systemd[1]: Stopping Login Service...
    Feb 13 16:00:56 pactor systemd[1]: Starting Login Service...
    installed packages: http://nopaste.info/1d1be9adad.html
    shorewall config: shorewall_conf.tar
    Last edited by debijan (2013-02-20 20:13:47)

    oh man... found the reason due to help of some guys on systemd irc... big thx to falconindy and alxchk.
    shorewall's SUBSYSLOCK option in shorewall.conf is by default set to /var/lock/shorewall.
    but the arch wiki point that it should be set to /var/run: https://wiki.archlinux.org/index.php/Router
    definitely wrong! that deletes the /var/run symlink and created a directory intstead.
    to set the SUBSYSLOCK on default is working like a charm.
    look also for this: https://bbs.archlinux.org/viewtopic.php?id=151285
    could somebody modify the wiki in the meantime, i will hold this thread on -not-solved in the meantime
    edit:/ oh man this wrong info in wiki did cost me a lot of time :-/
    Last edited by debijan (2013-02-13 22:09:35)

  • WL Unable to create session for users behind proxies

    Hi,
    I am pulling my hair out trying to figure out this problem.
    We are using WL6.1. We have two main apps each in their own
    wl domain. User logs into app1 and clicks on a link that redirects
    them to app2. App1 is load-balanced across two wl servers with
    no clustering enabled. App2 is load-balanced across two wl
    servers with clustering enabled. They are front-ended by five
    apache servers and the apache servers are front-ended by an
    altion load balancer. For some users (so far almost all of our
    customers in Australia and a few corporate customers on the east
    coast) wl under app2 cannot create a session for the user during
    the redirect. For all other users it works. App1 and App2 only
    set the http headers for no-cache (we know we need to set the
    meta-tags as well, but have not seen a problem yet). The user
    has session cookies enabled and successfully gets a session from
    app1. The only difference between app1 and app2 is that when
    the user logs into app1 it is via SSL. In app2, we call
    request.getSession(true) (which returns a session object)
    and then later on (during the same request) call
    request.getSession(false) and it returns null. Has
    anyone experienced anything similiar, or provide any helpful
    information?????
    NOTE: We are unable to reproduce this problem in any of our
    environments, even when we setup a proxy for all our http
    traffic. We turned off clustering on app2 and still wl cannot
    successfully create a new session.
    Thanks in advance,
    Jason

    Can you try adding the EJB 3.0 facet to your JPA project. Typically, JPA are initially a Utility faceted project, so you must remove this facet first and then select the EJB facet. There will also be an accompanying "Oracle WebLogic EJB Extensions" 10.3.6 facet that you will need to select.
    Steps:
    1. Rt Click the Project>Properties>Project Facets
    2. Uncheck the Utility Module(You may have to right click it and select unlock)
    3. Check The EJB Module Facet
    4. Check the Oracle WebLogic EJB Extensions 10.3.6.
    Then attempt to generate the session beans as before.

Maybe you are looking for