Unable to Create Source System under 'SAP'

Hi,
We are on BI 7.0 and I am trying to create an R/3 Logical System (RSA1 - Source Systems - SAP - Create...)
But everytime I try to do that logical system is getting created under 'BI' folder (instead of 'SAP' folder). Do you know why this could happen?
Thanks.

Hi SDNBI,
I have stumbled across the same phenomenon. Netweaver contains BI and ERP. When in the specific ERP system you want to create under the SAP folder you have in the past used the RSA1 transaction then the system thinks that this system should belong to BI folder. Hence it places that in BI folder. On the other hand when you have not executed RSA1 in the system you want to create then it should place it normally under the SAP folder because in that case it doesnt relate it to BI.
Hope that helps
Assign points if helpful.
Rgds
John

Similar Messages

SAP* or DDIC being unable to create logical system in SAP PI 7.1

greetings !
I am not a basis person.
I had freshly installed PI 7.1. I was finding that I am being unable to create new logical systems . I tried logging to both clients 000 and 001 using sap* , ddic , and pisuper . pisuper does not even have the authorization to execute SALE . SAP* and DDIC can excecute SALE but unable to create or assign clients.
I reinstalled my system from scratch thinking i must have errored on something, as creating clients is a very simple task. but even the new PI 7.1 gives me the same problem.
is something wrong with my installation , or there are additional roles/authrizations I need to assign to a user.
regards
rishi

Besides PISUPER other users are also created some of the are PIAFUSER, PIDIRUSER, PIRWBUSER etc. Every user has a specific purpose in a PI system. For activities like creating logical system etc. own id's should be used.
There are couple of guides out there which explains in detail the purpose of all the users in PI system.
Hope this helps.
Thanks,
Naveed

Unable to Create Source system in RSA1

I have installed a BI Server(Netweaver 2004s). When i try to add source system in RSA1, it gives an error "No entry for BW_USER in table RSADMIN available"
Let me tell what all i tried.
1) i clicked on settings>global settings- it gives a blank page. when i switch it to change mode, there is a button called "Position" and then "Entry1 of 2". I cant enter any value there and when i click on "Position" button, it says "Table RSADMINAV has no relevant fields"
2) In se16 tried to maintain RSADMINA table and for BW User field, i gave BW_USER, but there is no "execute" Button. all i see is "Reset" button. i tried pressing F8 key, it wont do anything. I clicked on save but it says "the entry is already exist"
Regarding RFC - i created a user BW_USER in ERP Sytem and ERP_USER in BI server and both the user type are System user.
From both the server i tried to do Connection test and i am not getting any error. but if i try clicking Remote Connection, it wont connect and wont do anything and no Errors.
Please help me Resolving this Issue, Since it became a very critical issue.

Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM

Unable to create Source system

Dear Experts,
While creating source sytem in BW i am getting below error
*You have no authorization for basic types (activity 01)*
Target system is CRM , Client is opened , security people are saying they have give all authorization .
could someone pl guide me on this.

Hi Vamsi,
From the error message, its clearing saying about missing authorization. Hence please check the authorization in BI system for the ID with which you are creating the source system connection and also check the authorization of RFC user which you have defined in RFC of both BI and CRM system.
For RFC user better you assign SAP_ALL and SAP_NEW
Thanks & Regards,
Sharath

Error while creating source system entry in SAP BW system

Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
Gaurav

I would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on

R/3 Source system under BI Folder in source system tab

Dear ALL,
i had created R/3 Source system under the context menu of SAP folder in Source System. but after creation it is reflecting under BI folder and SAP Folder is empty, eg:DEVCLNT100 it is shown under SAP BI FOLDER.please help me out in this regards
Thanks in Advance
Thanks & Best Regards
Syed

Hi,
This document related to SAP BI BASIS might be helpful.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/007af9a7-e48e-2a10-5c85-fcac22d58e82
regards,
Pruthvi R

Create Source System BW

Hi, I have problem try create source system (ERP) in the BW.
In the TX RSA1 > Modeling > Source System > SAP > Create connection succesfully but show new system in the Folder BI.
This new soruce system is displayed in the SAP folder but the folder is shown in BI.
Anyone have any suggestions?
Best Regards,
EDRS

Hello,
Looks like the SYSTEM shows right by displaying ECC under SAP rather than BI.
Refer to the note :- Note 1087980 - ECC Source systems appearing in BI folder
Thanks,
Arjun

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Unable to create a tablespace under user scott despite of many privileges

Hi,
I use user scott to test a rdf database using oracle 11.2.0.2 contained in oracle developer days in my oracle linux enterprise guest system. However, I am unable to create a tablespace under scott. The error message says insufficient privilege. Actually, I granted all privilege in Roles, System Privileges, Object Privileges to scott in the OEM panel. I also granted resource, create session, create table, unlimited tablespace to scott in sqlplus as well. However, I am still unable to create the tablespace. The command I used for creating tablespace is below:
create tablespace rdf_tblspace
datafile '\home\oracle\app\oracle\oradata\rdf_tblspace.dat' size 14m reuse
autoextend on next 10m maxsize unlimited
segment space management auto;
Error at Command Line:1 Column:1
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
Any suggestions will be much appreciated. Thanks a lot in advance.

user571093 wrote:
Hi,
Thanks for the helpful info. Can you pls show me how to grant REATE TABLESPACE system privilege to scott? The System Priveleges in OEM is not enough for scott? Thanks a lot.You should first go through [url http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_9013.htm] this This link contains details of GRANT command.
create tablespace is a system privilage granted to a user by the DBA in below way:
grant create tablespace to scott;

Create source system in bw

hi all,
         i am working on bw 7.0 its totally different from bw 3.5 in bw 7.0 i create
         info area , info object , and info cube when i am moving next step create source system ,info source , and assigning data source its totally different from bw 3.5 how can i create these three can any body send any document or any link or any pdf files realated to bw 7.0.
mail id : [email protected]
thanks.

Hi Ankit,
To Load Master data
Creation Of DataSource.
In the left panel select DataSource
Create application component (AC)
Right click AC and create DataSource
Specify data source name, source system, and data type (master data attributes / text / hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format (csv) and data separator( , )
In proposal tab click load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during creation of the transformation in InfoProviders.
Activate DataSource and click read preview data under preview tab to see DATA.
Create InfoPackage by right clicking DataSource and in schedule tab click start to load data to PSA.( make sure to close the flat file during loading )
4) Creation of data targets
In left panel select InfoProvider
Select created InfoArea and right click to select Insert Characteristics as info provider
Select required InfoObject
Under that InfoObject select subtype as attributes / Text / Hierarchies
Right click on attributes / Text / Hierarchies and select create transformation.
In source of transformation, select object type ( DataSource ) and specify its name and source system ( Note: Source system will be a temporary folder or package into which data is getting stored. )
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full /delta )
In update tab specify error handling ( request green/request green/ Deactivated/ No update No reporting )
Activate DTP and in execute tab click execute button to load data in data targets. Monitor the request
Go to InfoProvider and right click the InfoObject and select Maintain master data tab to see whether data has been uploaded or not.
To Load transaction Data
Creation of DataSource (PSA)
·     In the left panel select DataSource.
·     Create application component (AC).
·     Right click AC and create DataSource.
·     Specify DataSource name, source system, and data type (Transaction data).
·     In general tab give short, medium, and long description.
·     In extraction tab specify file path, header rows to be ignored, data format (csv) and data separator ( , ).
·     In proposal tab load example data and verify it.
·     In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in InfoProviders.
·     Activate data source and click read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click start to load data to PSA.( make sure to close the flat file during loading )
Creation of data targets
·     Right click on ODS or InfoCube and select create transformation.
In source of transformation, select object type (DataSource) and specify its name and source system (Note: Source system will be a temporary folder or package into which data is getting stored.)
Creation of data targets
·     Right click on ODS or InfoCube and select create transformation.
In source of transformation, select object type (DataSource) and specify its name and source system (Note: Source system will be a temporary folder or package into which data is getting stored.)
·     Activate created transformation.
·     Create Data Transfer Process (DTP) by right clicking the InfoCube.
·     Specify Source Of DTP (i.e. Object type: DataSource, DataSource: Name of DataSource, Source System: File.).
·     In extraction tab specify extraction mode (full).
·     In update tab specify error handling.
·     Activate DTP and in execute tab click execute button to load data in data targets.
Regards,
khyati.

Creating source system in RSA1

Hi guys,
Im trying to create a source system in the TC RSA1 between R/3 PRO y BW PRO. But at the end of the process it sent me the message Source system already exists. There is no other source system for R/3 created. What can it be?
Thanks a lot
Regards,
Vic

Hi Vic,
Goto sm59 and delete the logical system for the R/3 system and retry the steps again.
Check this doc:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
The steps for creating source system (automatic option in RSA1)is as follows:
1.Create remote logons in both the systems.
2.RSA1 -> Source system -> Create source system -> automatic creation
3. Enter the details of the R/3 system and the Remote logon ids of both the system. In case you are using BI 3.5 or greater + R/3 4.7 or greater the password is "case sensitive" hence have all the passwords in CAPS.
4. Now the system would create a remote logon and show up the remote logon screen. In that screen -> "logon and security" -> enter the remote logon id and password and save. Now the remote logon should not work from there.
The connection is established.
Bye
Dinesh

How to create source system for flat file loads

How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.

hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
           |---> context menu
               |--->create......
step:3 select your required source system Icon.
          (in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

How to create Source System in BI 7.0

Hi Experts,
How to create Source System in BI 7.0, please urgent
Thanks

Hi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
®

How to change source system in SAP BI

Hi,
In Sap BI we are having a source system ECC1CLIENT100, based on this we developed all the data modelling, now due to some reasons we made a copy of the souce system ECC1CLIENT100 to ECC2CLIENT100 and we removed ECC1CLIENT100 from SAP BI connections, Now what changes we have to do to connect the ECC2CLIENT100 to BI in the place of ECC1CLIENT100, please give me step to step what to do for sucessfull operations, Both the clients are having different IP, SYSTEM ID,
Thanks in advance,

Hi Bazi,
-->you need to maintain RFC to the new source system
-->delete old source system
-->create source system connection from RSA1
--> Run BDLS to point the data sources to new source system. This should be run on both BW and ECC.
You will need to run this BDLS several times
for more info check the below link
How to change the BI source system
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards
KP
Edited by: prashanthk on Aug 18, 2010 6:22 AM

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Unable to Create Source System under 'SAP'

Similar Messages

Maybe you are looking for