Unable to create source...
I get this message when attempting to embed an SWF file into
FLEX as follows:
[Embed (source='assets/advertdemoleft.swf')]
private var adl:Class;
the swf is built with Interactive Designer in Quark and
exported as SWF.
Help??
This forum is nearly dead. All the action is on the "Flex
General Discussion Forum". If this is really about flex 1.5, please
note that in the subject.
Similar Messages
-
Unable to create Source system
Dear Experts,
While creating source sytem in BW i am getting below error
*You have no authorization for basic types (activity 01)*
Target system is CRM , Client is opened , security people are saying they have give all authorization .
could someone pl guide me on this.Hi Vamsi,
From the error message, its clearing saying about missing authorization. Hence please check the authorization in BI system for the ID with which you are creating the source system connection and also check the authorization of RFC user which you have defined in RFC of both BI and CRM system.
For RFC user better you assign SAP_ALL and SAP_NEW
Thanks & Regards,
Sharath -
SQL to Oracle Migraton - Unable to create source model in Migration Workben
We are trying to use Oracle Migration Workbench utility to transfer data from SQL to Oracle. when we start creating the source model we get the following error :-
failed to load source model ora-01401 inserted value too large for column.. this is the error at the ss2k_syslogins table. this is a logical model creation from sql server db.
In case if this is a data issue with the syslogins table/view, is there any way to overcome this or whether we can do any settings at Workbench Level to overcome this..
Thanks in advance,
John.I think I figured it out.
1 - I used the Migration Work Bench that came with the 9.2.0.1 client - BAD IDEA.
2 - I down loaded the OMWB (10.x) - GOOD IDEA. I also downloaded the plugins so that the versions would match each other. Get rid of any existance of the 'old' OMWB directory under the OracleHome, so as not to get confused.
3 - I realized that you just extract the OMWB.zip file to the C: drive like some third world DOS application, so it won't show up in under your start menu.**
**I find this kinda cheesy that the Oracle installer is not involved here to add it to the Oracle Configuration and Migration menu in start up. I suppose you can copy the unzipped struture over top of the existing clint directory structure, but still dumb.
3 - The other odd piece, you down load the plugin as a zip (and not a jar), BUT DON'T UNZIP IT!! Rather place it in the ..\plugins directory, underneath wherever you unzipped the OMWB, and RENAME IT with a .JAR extension (again don't unzip).
4 - Make a shortcut on your desktop to the omwb.bat file (from where ever you unzipped the OMWB product)
5 - Fire up that icon and the product will look at the new .JAR in the plugin folder and 'tada', you have OMWB with your specific database plugin available.
The new product didn't hang for me. Now I just need to figure out how port this into a shema name OF MY CHOSING, and not the generic OMWB_Login1 that it created.
I f anyone has info on that, let me know.... I think its in the destination creation (step two of the whole process).
Jeff Ferrel - State of Nevada -
Unable to Create Source system in RSA1
I have installed a BI Server(Netweaver 2004s). When i try to add source system in RSA1, it gives an error "No entry for BW_USER in table RSADMIN available"
Let me tell what all i tried.
1) i clicked on settings>global settings- it gives a blank page. when i switch it to change mode, there is a button called "Position" and then "Entry1 of 2". I cant enter any value there and when i click on "Position" button, it says "Table RSADMINAV has no relevant fields"
2) In se16 tried to maintain RSADMINA table and for BW User field, i gave BW_USER, but there is no "execute" Button. all i see is "Reset" button. i tried pressing F8 key, it wont do anything. I clicked on save but it says "the entry is already exist"
Regarding RFC - i created a user BW_USER in ERP Sytem and ERP_USER in BI server and both the user type are System user.
From both the server i tried to do Connection test and i am not getting any error. but if i try clicking Remote Connection, it wont connect and wont do anything and no Errors.
Please help me Resolving this Issue, Since it became a very critical issue.Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM -
Unable to Create Source System under 'SAP'
Hi,
We are on BI 7.0 and I am trying to create an R/3 Logical System (RSA1 - Source Systems - SAP - Create...)
But everytime I try to do that logical system is getting created under 'BI' folder (instead of 'SAP' folder). Do you know why this could happen?
Thanks.Hi SDNBI,
I have stumbled across the same phenomenon. Netweaver contains BI and ERP. When in the specific ERP system you want to create under the SAP folder you have in the past used the RSA1 transaction then the system thinks that this system should belong to BI folder. Hence it places that in BI folder. On the other hand when you have not executed RSA1 in the system you want to create then it should place it normally under the SAP folder because in that case it doesnt relate it to BI.
Hope that helps
Assign points if helpful.
Rgds
John -
Unable to create IDES R/3 source system in BI
Dear Experts,
I am stuck in some stage while creating source system in R/3, Pls guide me.
Following things are carried out already...
IMG Settings for Connecting to Other SAP Systems
IMG Settings for Connecting to a BI System
Now I am in source systems on BI side.....I am following these steps,
click on source system on LHS, right click on SAP folder on RHS and select create.
Now from here I am unable to move further...I am getting connection of BW to source system option, what is available destination here...what shud i select ? is it the ligical destination or the actual R/3 server ?
In target computer(Server) what shud i select ? if it is application server how do i find it ? Any t-code ?
Please guide me.
Thanks in advance. Points will be taken care
Regards
MohanHi Shana,
Thanks for ur quick reply....In target computer(Server) what shud i select ? if it is application server how do i find it ? Any t-code ?
Pls guide me
Regards
Mohan -
Unable to create envelope from given source:
Hi all,
1) actually i have wrote a servlet and i am trying to get a SOAPMessage from input stream...the code is as follows
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
try
{ InputStream inputStream= request.getInputStream();
InputStreamReader ir = new InputStreamReader(inputStream);
BufferedReader br = new BufferedReader(ir);
String theLine;
while ((theLine = br.readLine()) != null)
System.out.println(theLine);
MimeHeaders headers = getHeaders(request);
MessageFactory msgFactory = MessageFactory.newInstance();
SOAPMessage msg = msgFactory.createMessage(headers, inputStream);
SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
SOAPBody body = envelope.getBody();
catch(Exception e)
e.printStackTrace();
public MimeHeaders getHeaders(HttpServletRequest req) {
Enumeration enum1 = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum1.hasMoreElements()) {
String headerName = (String)enum1.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values = new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens()) {
try{
String strValue = values.nextToken().trim();
headers.addHeader(headerName, strValue);
}catch (Exception e){
System.out.println("SAAJ_Simple_Receive getHeaders: " + e);
return headers;
2) i have added mails.jar,saaj-api.jar,saaj-impl.jar,saaj-ri.jar,xalan.jar,activation.jar,xercesimpl.jar and servlet.jar
3)but i am getting following exception
com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
13:39:29,986 ERROR [STDERR] at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:148)
13:39:29,986 ERROR [STDERR] at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPPart1_1Impl.createEnvelopeFromSource(SOAPPart1_1Impl.java:102)
13:39:29,986 ERROR [STDERR] at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:156)
13:39:29,986 ERROR [STDERR] at InterceptorServletClass.doPost(InterceptorServletClass.java:88)
13:39:29,986 ERROR [STDERR] at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
13:39:30,018 ERROR [STDERR] at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
13:39:30,018 ERROR [STDERR] at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
13:39:30,018 ERROR [STDERR] at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
13:39:30,018 ERROR [STDERR] at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
13:39:30,018 ERROR [STDERR] at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
13:39:30,018 ERROR [STDERR] at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
13:39:30,018 ERROR [STDERR] at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
13:39:30,018 ERROR [STDERR] at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
13:39:30,018 ERROR [STDERR] at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
13:39:30,018 ERROR [STDERR] at java.lang.Thread.run(Unknown Source)
4) can anyone plz tell me how would i resolve this problem... do i need to add any more jar fils?????
thanks in adavance(waiting for reply)Try editing the file and put only the <SOAP-ENV:Envelope> XML into your file.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Head
er><edc:transid xmlns:edc="http://www.edc.com">4</edc:transid><edc:cmdid xmlns:edc="http://www.edc.com">50</edc:cmdid><edc:attDataInfo xmlns:edc="http://www.edc.com">.\testdata\FormExample.xml</edc:attDataInf o></SOAP-ENV:Header><SOAP-ENV:Body/></SOAP-ENV:Envelope>
i.e remove all the "Part", "Content-type: text/xml", "image.jpeg" stuff. -
Unable to create report. Query produced too many results
Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
<br>
<br>
Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace: at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Unable to create cluster, hangs on forming cluster
Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 29/08/2008 19:43:14
Event ID: 1570
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
<EventID>1570</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
<EventRecordID>4481</EventRecordID>
<Correlation />
<Execution ProcessID="2412" ThreadID="3416" />
<Channel>System</Channel>
<Computer>NODE2</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 01/09/2008 12:42:44
Event ID: 1207
Task Category: Network Name Resource
Level: Error
Keywords:
User: SYSTEM
Computer: Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate. -
SRM 7.0 Unable to create PO - Classic Scenario.
Hello,
We are able to successfully create the below scenario.
PR in ECC --> Get PR in SRM --> Start Collective processing -> Transfer to Central System (SC is created for the PR @ this time) --> Create RFx --> Rfx Response --> Create PO. (PO is created in ERP, Classic Scenario)
We are able to get the PR & we are able to create SC successfully and the PR/ SC is available in Sourcing cocpit.
Able to create RFx --> Rfx Response.
Now once the RFx Response is Accepted --> We go for creating PO.
Classic Scenario.
The error is due to pricing - debugged and checked as mentioned in my earlier message.
IPC pricing is switched off and the BADI for simple pricing is activated.
Error : " Message A BBP_PD 396 cannot be processed in plugin mode HTTP "
But this is due to pricing is what i guess.
Error is raised in FM "BBP_PDPRC_UPDATE".
Kindly Suggest.
Unable to Create PO
Regards.
Edited by: Purshothaman P on Jul 6, 2010 1:50 PMHi,
Please check and run the following reports (se38): BBP_CND_CUSTOMIZING_CHECK & RSVMCRT_HEALTH_CHECK and post back the results.
Note for BBP_CND_CUSTOMIZING_CHECK also run 'Simulation of Pricing with Manual Price' (scroll down after executing the report initially).
Also the badi information you activated tells us a lot. Although i take it that you executed and read everything that's included in the transaction information. The following sentence gives a prety doubtfull feeling for the CPPR scenario to work for your configuration:
SAP recommends using this BAdI only in exceptional cases and only after checking thoroughly if it is compatible with the Business Scenarios used.
Note: From what i've just read IPC has to be disabled, certain badi's etc. need to be disabled. And VMC (sap basis) has to be configured. Please view: [http://help.sap.com/SCENARIOS_BUS2008/helpdata/EN/9C/F90B7CB34A4889935D1733C6756D5B/content.htm]
Could you also please check and provide whether 'normal' SRM classic scenarios like: SC -> PO do run within your system. Also the error and information you have provided is very little.
Kind regards,
Tim -
Unable to create IDOCs after client copy
I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FORM SAPLEDI1 LEDI1F09 108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION SAPLEDI1 LEDI1U19 33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION SAPLEDIR LEDIRU01 273
IDOC_INBOUND_WRITE_TO_DB
10 FORM SAPLEDIN LEDINF01 457
ONE_IDOC_STORE
9 FUNCTION SAPLEDIN LEDINU05 234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM SAPLEDIN LEDINV05 19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM SAPMSSY1 SAPMSSY1 254
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 59
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 229
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCV02 28
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 13 Ty. FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store = 0x070000008036F5B8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 14 (0x0000000E)
label = 20 (0x00000014)
fill = 9 (0x00000009)
leng = 1068 (0x0000042C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000048
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000008036F610
pghook = 0x07000000802D86D0
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 23 (0x00000017)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML 00000002#èXD63 070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No. 12 Ty. FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store = 0x0700000080284B80
ext1 = 0x0700000080285308
shmId = 0 (0x00000000)
id = 9 (0x00000009)
label = 10 (0x0000000A)
fill = 9 (0x00000009)
leng = 1062 (0x00000426)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000039
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000080320D90
pghook = 0x07000000802E1508
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 17 (0x00000011)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080284B30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML 00000000##XD63 070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000 00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 11 Ty. FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI 6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store = 0x0000000000000000
ext1 = 0x07000000802853F0
shmId = 0 (0x00000000)
id = 10 (0x0000000A)
label = 11 (0x0000000B)
fill = 0 (0x00000000)
leng = 100 (0x00000064)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000190
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080285340
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1 S005 No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No. 10 Ty. FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store = 0x07000000802D8760
ext1 = 0x07000000802D4490
shmId = 0 (0x00000000)
id = 3 (0x00000003)
label = 3 (0x00000003)
fill = 1 (0x00000001)
leng = 524 (0x0000020C)
loop = 224 (0x000000E0)
xtyp = TYPE#000136
occu = 10 (0x0000000A)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802DB9D8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 10 (0x0000000A)
lineAlloc = 10 (0x0000000A)
store_id = 9 (0x00000009)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack = 0x07000000802D8710
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store = 0x07000000802D8808
ext1 = 0x07000000802D8960
shmId = 0 (0x00000000)
id = 4 (0x00000004)
label = 4 (0x00000004)
fill = 9 (0x00000009)
leng = 1063 (0x00000427)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000138
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802E1550
pghook = 0x07000000802D8860
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 12 (0x0000000C)
shmIsReadOnly = 0 (0xHi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful -
i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well -
Unable to create RAID on SPARC-Enterprise-T5220
hi:
i got the following issue on my SPARC-Enterprise-T5220.
i have constructed the RAID-1 on 4 disks out of 6.
i have created RAID-1 on OS Disks using raidctl command on single user mode
and i have created RADI-1 on other two disks. but i'm unable to create RAID-1 on the rest of the two disks.
here i s the info i am giving
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@0/pci@0/pci@2/scsi@0/sd@1,0
2. c1t2d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
/pci@0/pci@0/pci@2/scsi@0/sd@2,0
3. c1t4d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 136>
/pci@0/pci@0/pci@2/scsi@0/sd@4,0
disks 2 and 3 are under raid but where as 0 and 1 are not
i am trying to construct raid on that disks it is giving following error
# raidctl -c c1t0d0 c1t1d0
Creating RAID volume will destroy all data on spare space of member disks, proceed (yes/no)? yes
Too many arrays.
here is my OS release information
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
SunOS 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
would any body help me on this.
thanks in advance
SNHello sir,
I work for one of Sun's Channel Development Partners and had a partner site the same problem today, but with a T5240.
If you check with the "Disk Volumes" section of the T5120/T5220 Admin Guide, it tells us that the integrated LSI controller only supports up to two volumes at a time.
http://docs.sun.com/source/820-2179-10/Volume-man.html#50606103_28600
If you need more options for hardware RAID configuration of the internal disks, Sun offers an internal PCI-E SAS RAID HBA:
SGXPCIESAS-R-INT-Z
Sun StorageTek (TM) 8-port internal SAS RAID Host Bus Adapter with RAID 0, 1, 1E, 10, 5, 5EE, 50, 6, 60 support, 256MB of onboard memory and 72 hour Battery Backed Write Cache. RoHS 6. X-Option.
List Price: $599
You'd also want this cable kit to go with it:
SEDX9SA2Z
Internal SAS Cable Kit required to use Sun RAID Card SG(X)PCIESAS-R-INT-Z for use with the SPARC Enterprise T5220
List Price: $40
Here is documentation about the adapter:
http://docs.sun.com/app/docs/coll/sas-raid-hba-int -
Disk Utility "Unable to create" Disk Image "error -39"
I am trying to create a disk image using Disk Utility of my wife's user area for backup. Everytime I try, I get the same result. Disk Utility spends several hours creating the archive, then at the very end it generates an error message and terminates the process. The error message is always "unable to create "user" - error -39".
The problem follows her data and not her computer. I backed up her user to an external drive and did the image creation on another computer. Same result.
When I do the same on my computer, the process completes fine.
What problem is Disk Utility having? Where can I find the meaning of Disk Utilitility's -39 error?
PowerBook G4 Mac OS X (10.4.5)I am still experimenting. To narrow the problem, I decided to create individual disk images of the folders in the User folder. The first one I tried was 7 GB and worked fine. Overnight, I tried one that is 13 GB. It failed with an out of room message on the startup disk! The startup disk has 17 GB free. Nothing should have been written to the startup disk!
This time, I configured Disk Utility to read from the startup disk and write to an external disk. The destination disk had more than enough space. But, I ran out of space on the source. It appears that Disk Utility is writing all or a portion of the compressed file to either the startup or the source disk and running out of room.
Previously, when I created the image of my user folder (instead of my wife's), the source was my user folder on the startup disk and the destinaion for the image was on an external disk. The difference I see is that my startup disk has enough free space for the entire compressed image file.
In my first attempt that gave me the -39, both the source and the destination disks were external. So maybe Disk Utility is creating the image on the source and at the end copying it to the destination. This would explain the difference in the error messages.
I'll try to confirm all of this in the next few days and report my findings. -
Disk Utility: Unable to create "ImageName.dmg" error -39
Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.
Maybe you are looking for
-
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
-
Recovery of reformatted external hard drive
My kid accidentally plugged my external hard drive (which I use to back up my Think Pad laptop) to my new MacBook Pro and let Time Machine reformatted it to become my mac's backup disk. Now all data that I stored before in that external hard drive is
-
How to compile my own applications
Hello, I have been working through a book on J2ee, and getting on very well, apart from the fact that I cant create my own applications because I dont know how to compile them!!! Im used to just typing javac classsname.java, and it all gets done - I'
-
Unatennded istallation of Adobe DreamWeaver 10.0
Im trying to deploy Adobe dreamWeaver to our servers. I have used the Adobe CS4 Deployment To olkit to make a package It installs fine but when i try to run it i get the message Dreamweaver Could not locate the Resources file in the Configuration fol
-
Save persistents data for all users
Hi The persistent datas are save for one specified user, the user logged in into the system (e.g. Windows). Is it possible to save persistent data for ALL users? If yes how? Thanks Hans