Unable To Create Stylesheet Transformation

Hi there....
We have developed the following code on MII 12.0.3
/XMII/Illuminator?Server=XacuteConnector&Mode=Query&Transaction=Project/BLT&OutputParameter=*&MappedParamTarget.1=Material&Param.1=&MappedParamTarget.2=Phase&Param.2=&MappedParamTarget.3=ProcessOrder&Param.3=&Content-Type=text/xml&StyleSheet=/XMII/CM/Project/File.xsl
When these files are imported to MII 12.0.4, the page displays the XML file and displays a message "Unable To Create Stylesheet Transformation".
After this error the patch 12.0.5 was installed .. and still the same problem.
The error log is ...
s/XMII#Java###Unable to read XSL document [...../XMII/CM/File.xsl]
[EXCEPTION]
#1#java.net.SocketException: Connection timed out:could be due to invalid address
ava###java.net.SocketException: Connection timed out:could be due to invalid address
Did anyone face similar problem. Any ideas or solution...
Thanks,
Ajay.

Rick and Jeremy,
Thank you ...
I tried them both before posting .. no luck.
There is a web-dispatcher for the 12.0.4 version, does this impact such kind of URLs?
I have asked the basis guy .. he told .. he doesn't see any errors.
Any ideas .. how to deal with such URLs if we have a web-dispatcher in between?
Java 1.4_2, AIX-64
Thanks,
Ajay.
Edited by: Ajay Malempati on Oct 21, 2008 9:02 PM

Similar Messages

Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

Hi All,
I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
"Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
Anybody has an idea about this error? Please help, thank you very much.
The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
Eric

HI Eric,
I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
SO you can check below mentioned things
1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
again all thing mentioned above is assumption.
YOu can use debugdiag tool to see if memory leak is happening
http://www.microsoft.com/en-in/download/details.aspx?id=26798

Unable to create Oracle BAM Sinks in Design Studio on Windows XP Profession

Hi,
I am unable to create any Oracle BAM Sink in Design Studio. I am getting this error, when trying to drag BAM Sink to my plan:
Failed to create the Transform COM object.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x5B]
Problem in step "Untitled, created 13. 11. 2007 16:39:07".
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x2, PlanMgr -- 0x32]
Error while preparing the Plan for execution.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0x11]
The Design Studio is installed on notebook with Windows XP Professional SP2.
On the W2K server with Data Flow Service installed it seems to be OK.
K.

Select Unique TO_CHAR(T1.TRANSDATE, 'YYYY') as YEAR,
TO_CHAR(T1.TRANSDATE, 'MM') as MONTH,
TO_CHAR(T1.TRANSDATE, 'MONTH') as MONTHNAME, T1.TRANSDATE
From SALES T1; <--bad
from SALES T1 <--correct
it should not have ";" at the end of the statement.

DeliveryException: unable to create a socket

Hi,
We are using the Proxy-> XI -> SOAP scenario(Synchronus). I am able to see that the request message mapping has transformed the message in to the required format. But, when it is calling the SOAP adapter it is giving com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket error. Can any one help us in knowing
what exactly is the problem. We have used 'Do not use SOAP envelop' option in the SOAP receiver adapter.
Thanks And Regards
Sripathi G Yogesh

hi,
you can refer to thread for your issue
Re: SOAP Adapter: java.io.IOException: unable to create a socket
regards,
ujjwal kumar

Javax.management.RuntimeMBeanException:Unable to access or transform markup

I have a portlet that I created from an ADF application using the JSF Portlet bridge. I created the application/portlet in JDev 11.1.1.6. I am able to run the application locally and I am also able to display the WSRP Producer Test Page for the portlet (running on the Integrated WebLogic Server). I am also able to bring up the WSDL. We have a test WebCenter application running and when I try to register my portlet as a portlet producer I get the error javax.management.RuntimeMBeanException:Unable to access or transform markup when I click the OK button on the Register Portlet Producer page. Before clicking the OK button I clicked the Test button and I got the Test Connection Successful message.
Any ideas on what could be causing this error? Where could I go to get more information about the error?
Thanks for the help!

The error "Unable to access or transform the markup from the WSDL URL" indicates that it was not able to resolve the WSDL URL. Check whether you are able to resolve this from the server and also you might have given random values to the proxy host and port values. The URL need to be resolved during registration so make sure you are providing the right host port values during update.

Webservice: Unable to create JAXBContext

Hi,
I am trying to create a Java web service with below class using JDev 11g:
public class TestWS {
public TestWS() {
super();
public XMLDocument testXML (XMLDocument xmldoc){
System.out.println("Inside service...");
System.out.println(xmldoc.getClass());
return new XMLDocument();
When I try to Test Web Service in Integrated WLS server, i get an error:
<May 25, 2010 4:29:32 PM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "TestWSPort" failed to preload on startup in Web application: "Test1-TestWS-context-root".
javax.xml.ws.WebServiceException: Unable to create JAXBContext
     at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:158)
     at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:87)
     at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:271)
     at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:351)
     at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:201)
     Truncated. see log file for complete stacktrace
Caused By: java.security.PrivilegedActionException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 2 counts of IllegalAnnotationExceptions
oracle.xml.scalable.InfosetReader is an interface, and JAXB can't handle interfaces.
     this problem is related to the following location:
          at oracle.xml.scalable.InfosetReader
          at public oracle.xml.scalable.InfosetReader oracle.xml.parser.v2.XMLDocument.getInfosetReader()
          at oracle.xml.parser.v2.XMLDocument
          at public oracle.xml.parser.v2.XMLDocument testws.jaxws.TestXML.arg0
          at testws.jaxws.TestXML
oracle.xml.scalable.InfosetReader does not have a no-arg default constructor.
     this problem is related to the following location:
          at oracle.xml.scalable.InfosetReader
          at public oracle.xml.scalable.InfosetReader oracle.xml.parser.v2.XMLDocument.getInfosetReader()
          at oracle.xml.parser.v2.XMLDocument
          at public oracle.xml.parser.v2.XMLDocument testws.jaxws.TestXML.arg0
          at testws.jaxws.TestXML
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:148)
     at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:87)
     at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:271)
     at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:351)
     Truncated. see log file for complete stacktrace
Caused By: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 2 counts of IllegalAnnotationExceptions
oracle.xml.scalable.InfosetReader is an interface, and JAXB can't handle interfaces.
     this problem is related to the following location:
          at oracle.xml.scalable.InfosetReader
          at public oracle.xml.scalable.InfosetReader oracle.xml.parser.v2.XMLDocument.getInfosetReader()
          at oracle.xml.parser.v2.XMLDocument
          at public oracle.xml.parser.v2.XMLDocument testws.jaxws.TestXML.arg0
          at testws.jaxws.TestXML
oracle.xml.scalable.InfosetReader does not have a no-arg default constructor.
     this problem is related to the following location:
          at oracle.xml.scalable.InfosetReader
          at public oracle.xml.scalable.InfosetReader oracle.xml.parser.v2.XMLDocument.getInfosetReader()
          at oracle.xml.parser.v2.XMLDocument
          at public oracle.xml.parser.v2.XMLDocument testws.jaxws.TestXML.arg0
          at testws.jaxws.TestXML
     at com.sun.xml.bind.v2.runtime.IllegalAnnotationsException$Builder.check(IllegalAnnotationsException.java:102)
     at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(JAXBContextImpl.java:438)
     at com.sun.xml.bind.v2.runtime.JAXBContextImpl.<init>(JAXBContextImpl.java:286)
     at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:139)
     at com.sun.xml.bind.api.JAXBRIContext.newInstance(JAXBRIContext.java:105)
     Truncated. see log file for complete stacktrace
>
Can anyone explain the cause the of issue and any solution for this...
Regards
Amit

hI
I am getting the same issue, did you find any solution .please email me at [email protected]
I wrote 2 methods in my in JDeveloper . First Method gets XML String does some processing and sends XML to a HTTP web server URL, first method calls second method -parseXML, which does some parsing and returns XML to first method.
Now when I created web service, annotation for 2 methods were created like
@WebService(portName = "HTTPClassSoap12HttpPort")
@BindingType(SOAPBinding.SOAP12HTTP_BINDING
@WebMethod(exclude = true). I even tried changing this to false later.
When I deploy on WLS/ SOA Server and create a WAR I get an Exception.
03:29:07 PM] weblogic.application.ModuleException: [HTTP:101216]Servlet: "HTTPClassSoap12HttpPort" failed to preload on startup in Web application: "XYZApp-XYZJavaProject-context-root.war".
javax.xml.ws.WebServiceException: Unable to create JAXBContext
     at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:164)
     at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:94)
     at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:265)
     at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:363)
     at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:202)
     at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:514)
     at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:557)
     at weblogic.wsee.jaxws.JAXWSDeployedServlet.getEndpoint(JAXWSDeployedServlet.java:183)
     at weblogic.wsee.jaxws.JAXWSServlet.registerEndpoint(JAXWSServlet.java:96)
     at weblogic.wsee.jaxws.JAXWSServlet.init(JAXWSServlet.java:61)
     at weblogic.wsee.jaxws.JAXWSDeployedServlet.init(JAXWSDeployedServlet.java:55)
     at javax.servlet.GenericServlet.init(GenericServlet.java:242)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3127)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:489)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1269)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.security.PrivilegedActionException:
com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 5 counts of IllegalAnnotationExceptions
java.io.DataInputStream does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.io.DataInputStream
          at public java.io.DataInputStream fmbrilljavaproject.jaxws.ParseXML.arg0
          at fmbrilljavaproject.jaxws.ParseXML
java.io.FilterInputStream does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.io.FilterInputStream
          at java.io.DataInputStream
          at public java.io.DataInputStream fmbrilljavaproject.jaxws.ParseXML.arg0
          at fmbrilljavaproject.jaxws.ParseXML
java.lang.StackTraceElement does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.lang.StackTraceElement
          at public java.lang.StackTraceElement[] java.lang.Throwable.getStackTrace()
          at java.lang.Throwable
          at java.lang.Exception
          at public java.lang.Exception fmbrilljavaproject.jaxws.SAXExceptionBean.exception
          at fmbrilljavaproject.jaxws.SAXExceptionBean
javax.xml.transform.SourceLocator is an interface, and JAXB can't handle interfaces.
     this problem is related to the following location:
          at javax.xml.transform.SourceLocator
          at public javax.xml.transform.SourceLocator fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean.locator
          at fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean
javax.xml.transform.SourceLocator does not have a no-arg default constructor.
     this problem is related to the following location:
          at javax.xml.transform.SourceLocator
          at public javax.xml.transform.SourceLocator fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean.locator
          at fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean
     at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:151)
     at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:95)
     ... 52 more
Caused by: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 5 counts of IllegalAnnotationExceptions
java.io.DataInputStream does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.io.DataInputStream
          at public java.io.DataInputStream fmbrilljavaproject.jaxws.ParseXML.arg0
          at fmbrilljavaproject.jaxws.ParseXML
java.io.FilterInputStream does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.io.FilterInputStream
          at java.io.DataInputStream
          at public java.io.DataInputStream fmbrilljavaproject.jaxws.ParseXML.arg0
          at fmbrilljavaproject.jaxws.ParseXML
java.lang.StackTraceElement does not have a no-arg default constructor.
     this problem is related to the following location:
          at java.lang.StackTraceElement
          at public java.lang.StackTraceElement[] java.lang.Throwable.getStackTrace()
          at java.lang.Throwable
          at java.lang.Exception
          at public java.lang.Exception fmbrilljavaproject.jaxws.SAXExceptionBean.exception
          at fmbrilljavaproject.jaxws.SAXExceptionBean
javax.xml.transform.SourceLocator is an interface, and JAXB can't handle interfaces.
     this problem is related to the following location:
          at javax.xml.transform.SourceLocator
          at public javax.xml.transform.SourceLocator fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean.locator
          at fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean
javax.xml.transform.SourceLocator does not have a no-arg default constructor.
     this problem is related to the following location:
          at javax.xml.transform.SourceLocator
          at public javax.xml.transform.SourceLocator fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean.locator
          at fmbrilljavaproject.jaxws.TransformerConfigurationExceptionBean
     at com.sun.xml.bind.v2.runtime.IllegalAnnotationsException$Builder.check(IllegalAnnotationsException.java:102)
     at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(JAXBContextImpl.java:448)
     at com.sun.xml.bind.v2.runtime.JAXBContextImpl.<init>(JAXBContextImpl.java:297)
     at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:139)
     at com.sun.xml.bind.api.JAXBRIContext.newInstance(JAXBRIContext.java:105)
     at com.sun.xml.ws.developer.JAXBContextFactory$1.createJAXBContext(JAXBContextFactory.java:73)
     at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:159)
     at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:151)
     ... 54 more
:com.sun.xml.bind.v2.runtime.IllegalAnnotationsException:5 counts of IllegalAnnotationExceptions
[03:29:08 PM] #### Deployment incomplete. ####
[03:29:08 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Unable to create a report in bi publisher 10g

Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
Thanks

Hi,
Can any one..???

Unable to create report. Query produced too many results

Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
        <br>
        <br>
        Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
   at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
   at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.

Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
              maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ORA-01658: unable to create INITIAL extent for segment in tablespace

NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!

You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue

Unable to create an encrypted disk image in Lion

disk utility gives the error Unable to create "Volume.dmg." (error - 60008) when creating an encrypted disk image. I am using the following steps:
    1.    Open disk utility
    2.    Select the disk (internal or external) to create the image on
    3.    Select File>New>Blank Disk Image…
    4.    Save As: 'Volume'
    5.    Name: Volume
    6.    Size: 50GB
    7.    Format: Mac OS Extended (Journaled)
    8.    Encryption: 128-bit AES encryption
    9.    Image Format: read/write disk image
    10.    Click the Create button
    11.    Password dialog appears
    12.    When I enter a password the dialog closes after entering only a few characters i.e. before I've finished typing, and the following error message displays:
Unable to create "Volume.dmg." (error - 60008)
I have previously, successfully, created encrypted disk images in Snow Leopard, and I don't know why I can't in Lion
Does anyone have any ideas?

Thanks for this Thomas.
I've tried naming the image differently, but still received the error, I did however try different permutations for the password.
The error seems to happen if I use a purely numerical password string and occurs on input of the 10th numerical character, if I start with numerical character but use an alpha before the 9th number I can continue and create a password, and I can create a password if I start with an alpha and switch to numerals after the first alpha character, purely alphabetical passwords are fine too.
It seems that Lion doesn't like purely numerical passwords greater than 9 characters, whereas Snow Leopard wasn't so fussy. Seems it's a bit of a bug.
Thanks for your help

Unable to create an encrypted disk image with Disk Utility

Hi:
With our upgrade to Lion a few weeks ago, we're now unable to create an encrypted disk image of any type using Disk Utility any more. This problem occurs on 3 different machines, and is reproducible whether one is using an internal HD or an external FW HD. We can successfully create nonencrypted disk images.
This is a duplicate post with all the details here: https://discussions.apple.com/message/18469359#18469359
We haven't had any luck with a solution trying various permissions fixes as helpfully suggested by other readers in response to the error message # (-60008 error), so I'm hoping that someone else has run across a solution from the encrypted disk image perspective and that this tag line will generate some help.
Thank you!

Save As: 01 (on Desktop)
Name: 01
Size: 100 MB
Format: Mac OS Encrypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890
This says password strength is "Weak"
All works fine
Then I repeated this using:
Save As: 02 (on Desktop)
Name: 02
Size: 100 MB
Format: Mac OS Encypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890 and when I start to enter the next "1" I get the "Unable to create "02.dmg." (error -60008)
OS 10.7.4
Disk Utility Version 12.1.1 (353)

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

Unable to create image buffer after RAM preview

Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
Some more details about my comp:
1920x1080 @ 29.97
Ray-traced 3D
About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
Running Windows 7 Professional
i7 2600K
32GB RAM
2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
508GB free on my 2TB internal drive where the project and cache lives
From my GPU info window in case it's useful:
Fast Draft:
Available
Texture Memory:
600.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 570/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
2 (GeForce GTX 570, GeForce GTX 570)
Current Usable Memory:
1.04 GB (at application launch)
Maximum Usable Memory:
1.25 GB

Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
Mylenium

Unable To Create Stylesheet Transformation

Similar Messages

Maybe you are looking for